Science Arts & Métiers (SAM)

9 shows the performance of the iron core structures in terms of thrust obtained for the normal magnetization and Hal- bach array shuttles associated with the three kinds of windings..

Figure 6: Example of result for a unit heat flow moving on a plane at 20 m/s milling case Figure 8 describes evolution of maximum temperature obtained by simulation for a unit mobile

Optical transmittance spectra versus wavelength in the visible region of GLAD titanium thin films deposited on glass substrates with an incidence angle a = 85° and after the annealing

Figure 2:Master curves identified on the experimental mass variation measured after time shifting to the reference temperatureθref= 150°C for a the ventilated oven and b saturated steam

Discussion 199 Chemical characterizations of a GO electrical steel after oxidizing and nitriding show that the kinetics 200 of nitrogen adsorption and diffusion highly depends on

Interpretations The different previous results show that the reuse of IN718 powder after the proposed recycling treatment does not modify significantly: 1 the characteristics of the

After describing the 3D angle-interlock composite studied in this work, in-plane tensile and shear tests conducted to determine the elastic modulus in both weft and warp directions and

b–c Indentation data versus the indenter displacement applied on the TiO2/HAP composite coating for the determination of the b hardness and c elastic modulus before black line and after