• Nenhum resultado encontrado

Abrasive wear

Analysis of polymerization time on abrasive wear of dental resins

Analysis of polymerization time on abrasive wear of dental resins

... the abrasive wear of six composite thermofixed dental resins subjected to different polymerization ...the abrasive wear resistance of the ...

4

Abrasive Wear Resistance of the Iron- and WC-based Hardfaced Coatings Evaluated with Scratch Test Method

Abrasive Wear Resistance of the Iron- and WC-based Hardfaced Coatings Evaluated with Scratch Test Method

... to abrasive wear of the iron‐based hardfaced coatings is normally tested against the resistance of proven, but more expensive materials, such as WC‐based hardfaced ...

5

Microdureza e desgaste abrasivo de rochas silicáticas de revestimento / Microhardness and abrasive wear of silicatic dimension stone

Microdureza e desgaste abrasivo de rochas silicáticas de revestimento / Microhardness and abrasive wear of silicatic dimension stone

... and abrasive wear test in the Amsler machine, aiming to determine the eventual relation among these properties regarding durability prediction in use situation, particularly in high foot traffic ...Amsler ...

12

ANN & ANFIS Models for Prediction of Abrasive Wear of 3105 Aluminium Alloy with Polyurethane Coating

ANN & ANFIS Models for Prediction of Abrasive Wear of 3105 Aluminium Alloy with Polyurethane Coating

... find abrasive wear during the ...the abrasive wear of a coated specimen can be predicted accurately and precisely using ANN and ANFIS ...

8

Study on the behavior of the Minimum quantity lubricant - MQL technique under different lubricating and cooling conditions when grinding ABNT 4340 steel

Study on the behavior of the Minimum quantity lubricant - MQL technique under different lubricating and cooling conditions when grinding ABNT 4340 steel

... the abrasive grain, dressing conditions, material removal rate, spark-out time and lubrication and cooling ...to abrasive wear than the conventional grinding ...

8

Usage of abrasion-resistant materials in agriculture

Usage of abrasion-resistant materials in agriculture

... Abrasion-resistant steel Creusabro 4800 performs much better characteristics. There were no sulphides found in all of the metallographic samples; the structure is formed by a mixture of bainite- martensite needles, see ...

10

Mat. Res.  vol.20 número3

Mat. Res. vol.20 número3

... speciic wear rate of jute iber reinforced epoxy composites with diferent weight percentage of iber loading (10, 20, 30, 40 ...three-body abrasive wear analysis was studied according to ASTM-G65 using ...

14

Mat. Res.  vol.20 número4

Mat. Res. vol.20 número4

... micro-scale abrasive wear testing device, denominated ‘kaloMAX NT II’, was employed in this study (Figure ...the wear scar is measured, the entire vice may be removed with the sample in place and put ...

11

The Wear behavior of UHMWPE against Surface Modified CP-Titanium by Thermal Oxidation

The Wear behavior of UHMWPE against Surface Modified CP-Titanium by Thermal Oxidation

... the wear sliding. The thin oxide layer will peel off as wear debris or will penetrate in the UHMWPE and lead to scratching of the CP-titanium surface which, in turn, leads to severe abrasive ...

9

Nanocomposites Synthesized by in Situ Processing

Nanocomposites Synthesized by in Situ Processing

... and wear properties of Cu-ZrO 2 nanocomposite were ...The abrasive wear rate of the Cu-ZrO 2 nanocomposite increased with the increasing load or sliding velocity and is always lower than that of ...

11

Investigation of composite coated Ti-C-N surfaces with ball-cratering test method

Investigation of composite coated Ti-C-N surfaces with ball-cratering test method

... sliding abrasive wear test was conducted on the AISI SS410 and Ti C N coated against high carbon steel ...the wear test was performed at the room temperature having relative humidity ...0.0001. ...

7

Mat. Res.  vol.15 número5

Mat. Res. vol.15 número5

... the abrasive wear promoted by hard BCC phase particles can lead to a extensive contamination with Fe, as observed for high energy ball-milling of a Ti-Cr-V cast alloy 9 ...

4

Polímeros  vol.25 número3

Polímeros vol.25 número3

... and abrasive wear were determined with a tribometer in a ball-on-disc ...each wear test, each sample and abrasion element was cleaned with ...the wear volumes of the samples were quantified by ...

6

Mat. Res.  vol.19 número3

Mat. Res. vol.19 número3

... P20 steel, which is mainly used in plastic molds, was thermochemically treated by ion plasma nitriding and solid and gas carburization. In this work, the solid and gas carburization were performed at 925 ºC for four ...

9

Cerâmica  vol.59 número351 a02v59n351

Cerâmica vol.59 número351 a02v59n351

... [1]. The bending strength values of LAS glass-ceramics range from 180 to 830 MPa when reinforced with SiC ibers [1]. However, particulate glass-ceramic matrix composites show better thermal shock resistance [1] and are ...

9

Mat. Res.  vol.20 número4

Mat. Res. vol.20 número4

... the formation of debris particles in any sliding system and also the agglomeration due to the continuous rubbing of the two bodies. Although, the thermal conductivity (W/mK) of the tungsten carbide ball is 8 times than ...

10

Investigation on Friction and Wear Properties of High-Temperature Bearing Steel 9Cr18Mo

Investigation on Friction and Wear Properties of High-Temperature Bearing Steel 9Cr18Mo

... the wear surface parameters of the 9Cr18Mo sample after being rubbed against the different balls were determined (see Table ...frictional wear surface had varying degrees of burning, adhesion, plowing and ...

8

Development of Abrasive Selection Model/Chart for Palm Frond Broom Peeling Machine Design

Development of Abrasive Selection Model/Chart for Palm Frond Broom Peeling Machine Design

... of abrasive required for any given design of palm frond broom peeling machine from the abrasive selection chart (a plot of coefficient of friction, µ against abrasive cloth/paper ...

7

SOUZA Manuscript Wear IH 7231 Personal sion

SOUZA Manuscript Wear IH 7231 Personal sion

... 6 evaluation of the electrochemical behavior of materials during sliding tests. The correlation between corrosion, wear, and friction taking place in a given system can be clarified based on such measurements, but ...

27

Soldag. insp.  vol.19 número3

Soldag. insp. vol.19 número3

... - Wear behavior of coatings was dictated by ratio between Cobalt solid solution and carbides fraction, which was signiicantly increased with the deposition ...on wear mass loss rate was observed for ...

8

Show all 240 documents...

temas relacionados