• Nenhum resultado encontrado

CNC machining

AUTOMATING FACING OPERATION ON A CNC MACHINING CENTRE

AUTOMATING FACING OPERATION ON A CNC MACHINING CENTRE

... a CNC machining centre, using a face-milling cutter, on any workpiece, because many a time, the workpiece is obtained through a “rough” casting ...first machining operation. On a CNC milling ...

3

A Review on Experimental Investigation of Machining Parameters during CNC Machining of OHNS

A Review on Experimental Investigation of Machining Parameters during CNC Machining of OHNS

... Today, CNC machining has turned out to be an indispensable part of machining ...through CNC cannot be achieved by the conventional manufacturing ...a CNC machine, these errors depend on ...

9

Study on Gun Drilling Technology in CNC Machining

Study on Gun Drilling Technology in CNC Machining

... Separate CNC machine and it’s designed to improve the performance and efficiency ...allow CNC machining centres, tools with high pressure through the spindle coolant, a finite depth should have the ...

118

Investigation of Austenitic Stainless Steel Coatings on Mild Steel Produced by Friction Surfacing Using a Conventional CNC Machining Center

Investigation of Austenitic Stainless Steel Coatings on Mild Steel Produced by Friction Surfacing Using a Conventional CNC Machining Center

... chosen as factors were surface roughness (R a , 0.66 and 2.95 µm), rotation (1500 and 2000 rpm) and travel speed (190 and 250 mm/min). The roughness of the substrate material can be expected to modify the friction ...

11

Prediction of Chatter in CNC Machining based on Dynamic Cutting Force for Ball End Milling

Prediction of Chatter in CNC Machining based on Dynamic Cutting Force for Ball End Milling

... This paper is successfully completed and all of the noticed objectives already been achieved which are to predict the chatter occurrence of end milling by using ball end mill cutter. The cutting forces of mild steel ...

6

Análise do processo de fresamento de MDF em centro de usinagem CNC

Análise do processo de fresamento de MDF em centro de usinagem CNC

... a machining method widely used in the furniture industry; despite the remarkable relevance of the subject there are few works dealing with the specific MDF milling process using Computerized Numerical Control ...

146

Knowledge Management in Machining Processes

Knowledge Management in Machining Processes

... The information coming from the Marketing Knowledge-unit is diagnosed by the comparison unit. Also the comparison unit has information-receive ability from knowledge bank. The essential function of the comparison unit ...

5

Optimal Selection of Tools for Rough Machining of Sculptured Surfaces

Optimal Selection of Tools for Rough Machining of Sculptured Surfaces

... The CNC machining optimization is a widely researched topic with many publications regarding several aspects of the operation on milling ...Since machining centers on production lines are operated ...

6

Technological evolution in machining processes with CNC machines in the context of the concept of Industry 4.0

Technological evolution in machining processes with CNC machines in the context of the concept of Industry 4.0

... the machining area, machining processes, CNC machines, CAM and CAD software and the context of Industry ...the CNC machining area, a technology with a combination of sensors, ...

123

Desenvolvimento do dossier técnico e aplicação para gestão de maquinagem com tecnologia CNC

Desenvolvimento do dossier técnico e aplicação para gestão de maquinagem com tecnologia CNC

... torno CNC Haas TL1 para as três primeiras fases, e o torno convencional para a fase ...torno CNC para a as três primeiras fases prende-se com a execução das superfícies B, D e E que são superfícies ...

159

Percursos de Maquinagem 2D: Mesa CNC e Robô Industrial

Percursos de Maquinagem 2D: Mesa CNC e Robô Industrial

... máquinas CNC nos componentes que integram e a geração de trajetórias que permitem realizar, torna-os uma alternativa interessante, devido ao seu baixo custo e à disponibilidade de ferramentas de programação de ...

105

Sistematização da preparação e organização do trabalho de máquinas CNC na Felino, S.A.

Sistematização da preparação e organização do trabalho de máquinas CNC na Felino, S.A.

... Set up times and costs, whenever CNC machines are involved, have to be adequate in order to approach the need for maximum profitability of these kind of equipments. However, in companies characterized by long ...

93

Manual de uso Rápido e Operação Torno CNC OneProject

Manual de uso Rápido e Operação Torno CNC OneProject

... Defina o valor para movimento na janela Slow Jog Rate exemplo 50 e tecle ENTER ou utilize As opções On para reduzir ou Up para acrescentar... Quando acionarmos a função Jog Mode [r] ...

19

Manual de procedimentos e optimização de ferramentas das máquinas CNC do DEMec

Manual de procedimentos e optimização de ferramentas das máquinas CNC do DEMec

... A principal característica deste método é o facto de o equipamento CNC possuir comandos para a programação na oficina, que oferecem ao utilizador uma orientação, apoiando-o na escrita do programa. O utilizador, ...

376

Abordagem 6SIGMA à redução da carga de trabalho de máquinas CNC

Abordagem 6SIGMA à redução da carga de trabalho de máquinas CNC

... E nesta evolução progressiva, tanto de uma empresa como dos seus produtos, o tempo é, na maioria das vezes, um fator de extrema importância (e por vezes mesmo o mais importante) no sucesso do negócio. Quanto menor for o ...

77

Caracterização e aplicações de celuloses nanofibrilada (CNF) e nanocristalina (CNC)

Caracterização e aplicações de celuloses nanofibrilada (CNF) e nanocristalina (CNC)

... A crescente preocupação das economias industrializadas em se desenvolver de forma sustentável intensificou a busca por materiais biológicos para diversas aplicações tecnológicas. Fontes sustentáveis e abundantes de ...

102

Theoretical Determination of Temperature Field in Orthogonal Machining

Theoretical Determination of Temperature Field in Orthogonal Machining

... The models can be used to investigate the effects of the major parameters on the cooling efficiency. Without involving intensive computation for chip formation analysis, this study used the derived heat-source ...

12

Desenvolvimento de servidor OPC UA para sistema CNC

Desenvolvimento de servidor OPC UA para sistema CNC

... The objective of the current work is to develop an OPC UA server application to be used with existing CNC machines. As a base, the solution chosen comes from the OPC Foundation, both because it is a free access ...

82

Desenvolvimento de métodos de maquinação de produtos em célula robótica e em fresadora CNC

Desenvolvimento de métodos de maquinação de produtos em célula robótica e em fresadora CNC

... Os passos descritos acima, bem como o que as imagens ilustram, são referentes ao caso do plano de trabalho de exportação ser na base do modelo (que é o método mais comum utilizado para[r] ...

72

The recycling through melting Zircaloy machining chips, preliminary results

The recycling through melting Zircaloy machining chips, preliminary results

... 5. DAYTON, R.W.; ALLEN, C.M.; EBERTS, W.U. The reclamation of zirconium machining chips to produce arc-melting feed stock. United States at Energy Comm.; AECD-3499, 1952. 6. MIMURA, K.; LEE, S-W.; ISSHIKI, M. ...

11

Show all 104 documents...

temas relacionados