Factorial design and response surface analysis
MATERIALS AND METHODS Bacterial cultures and growth media
... experimental factorial design and response surface analysis were possible to determine optimal operating conditions to obtain higher bacteriocin activity and total viable ...
5
Application of the factorial design and response surface methodology for optimization of alcoholic fermentation.
... THE FACTORIAL DESIGN AND RESPONSE SURFACE METHODOLOGY FOR OPTIMIZATION OF ALCOHOLIC ...nitrogen and phosphorus and degrees Brix on the yield and productivity of ...
5
Braz. J. Chem. Eng. vol.28 número1
... complete factorial design followed by response surface analysis was used to evaluate the effect of concentration of the precipitant agent (ammonium sulfate and ethanol), ...
10
Brown Rice Peeling Machine Production Process Optimization Using (2)3 Factorial Design : Part I
... moisture and volume. It was performed according (see Table II and III), and brown rice peeling machine in Fig ...3 Factorial Design in Table ...MOIS, and VOL.) and the ...
5
Braz. J. Chem. Eng. vol.23 número2
... experimental design and inulinase from Kluyveromyces marxianus ATCC ...(sucrose and inulin), pH and temperature on inulinase activity were verified using four factorial design ...
8
Braz. J. Chem. Eng. vol.27 número4
... carotenoid and canthaxanthin production by ...Plackett-Burman design. This approach resulted in 28 experimental runs and eight center points in the fed- batch process (Table ...levels and ...
13
Mat. Res. vol.12 número2
... selecting and testing a first trial batch, evaluating the results, and then adjusting the mixture proportions and testing further mixtures until the required properties are ...consuming and ...
10
Rev. bras. farmacogn. vol.25 número3
... Lipid peroxidation (LPO) has been defined as the biological dam- age caused by free radicals that are formed under oxidative stress (Zin et al., 2002). Several plant extracts have been shown to inhibit LPO as measured by ...
6
STARCH EXTRACTION FROM THE PEACH PALM (Bactris gasepaes Kunth.) FRUIT: A MODEL APPROACH FOR YIELD INCREASE
... rhizomes and fruits. It is the main source of energy stored in higher plants and provides 70 to 80% of the calories consumed by humans (LEONEL et ...pulp and paper, chemical, textile and ...
12
USE OF BUTTER MILK AND POULTRY-TRANSFORMING WASTES FOR ENHANCED PRODUCTION OF Bacillus subtilis SPB1 BIOSURFACTANT IN SUBMERGED FERMENTATION
... g/L) and diluted sea water ...wastes and effluents obtained from local ...reports and studies; efforts are concentrated on different processes of biosurfactant production to find an appropriate ...
5
BAR, Braz. Adm. Rev. vol.9 número1
... companies and securities ...used and combined the models from Weill and Broadbent (1998) and Gregor, Martin, Fernandez, Stern and Vitale ...Transformational and Infra-structure) ...
22
J. Braz. Chem. Soc. vol.24 número11
... peak response values, like effective mobilities, rather than two peak functions, for example resolution, provides an attractive alternative for optimization ...levels and how these levels can be manipulated ...
10
Rev. bras. epidemiol. vol.15 número3
... (c1 and c2) being the ...bridging and bonding, it is suggested that these latter ones are prioritized in terms of the construction of items of greater dif- ...bridging and bonding of social capital ...
12
Split double factorial with additional treatment and the post-harvest of Niagara grapes
... double factorial designs with an additional treatment in the plot raise when researchers plan an experiment along time (for instance) and, at the same time, want to study two other factors, which absence of ...
7
Why should traceology learn from dental microwear, and vice-versa?
... In response to these issues, Ungar, Scott, Brown and colleagues proposed to use confocal microscopy to acquire 3D representations of the tooth's surface at high magni fications and to ...
6
Batch phenol biodegradation study and application of factorial experimental design
... aeration, and the size of bacteria on the treatment ...experimental design method for evaluating the inluence of the operation vari- ables on these ...
5
Mat. Res. vol.16 número4
... variable, and therefore the material that has a greater pMEMO content shows greater ...2 and x 3 is observable in the level plots (response surface) given by the mathematical models, shown in ...
5
J. Braz. Chem. Soc. vol.16 número6A
... voltammetry and related electroanalytical techniques but also spectroanalytical techniques, such as inductively coupled plasma optical emission spectrometry (ICP OES) and inductively coupled plasma mass ...
6
The Method of Optimizing the Drying Process of an Oak Blank in a Radiofrequency Electromagnetic Field
... electromagnetic and the thermal fields, as well as mass and movement problems of the blank ...(FEM) and The Boundary Element Method (BEM), in 2D and 3D, with significant advantages in ...
4
Raji Rahulan, Manjunath G, Kesavan Madhavan Nampoothiri
... proteins and peptide substrates that have a small, uncharged amino acid in the penultimate position (Bradshaw et ...gedanensis and also demonstrated its use as tool for protein hydrolysate preparations with ...
7