• Nenhum resultado encontrado

Stainless steel

Porous stainless steel for biomedical applications

Porous stainless steel for biomedical applications

... austenitic stainless steel was synthesized by powder metallurgy with relative density of ...the steel foams were not toxic to fibroblast ...on steel foams and compared to massive steel. ...

9

Optical characterization of 316L stainless steel coated with sol –gel titania

Optical characterization of 316L stainless steel coated with sol –gel titania

... 316L stainless steel plates were coated with the as-prepared sols by means of the dip-coating technique, using withdrawal speeds of 6 mm/min, 30 mm/min, and 60 ...of stainless steel (light ...

6

Effect of heat treatment on stainless steel orthodontic wires

Effect of heat treatment on stainless steel orthodontic wires

... required, stainless steel archwires are frequently used according to pre-es- tablished individual ...contouring, stainless steel wires reach a high level of internal tension and require heat ...

7

STUDIES ON WETTABILITY OF STAINLESS STEEL 316L POWDER IN LASER MELTING PROCESS

STUDIES ON WETTABILITY OF STAINLESS STEEL 316L POWDER IN LASER MELTING PROCESS

... Initially, the stainless steel powder was spread over the substrate and maintaining the thickness of 100 µm using scraper blade. Laser moves in x direction of the powder bed which produces melted track. ...

8

CHOSEN PROPERTIES OF SANDWICH MATERIAL Ti-304 STAINLESS STEEL AFTER EXPLOSIVE WELDING

CHOSEN PROPERTIES OF SANDWICH MATERIAL Ti-304 STAINLESS STEEL AFTER EXPLOSIVE WELDING

... 304 stainless steel (304 SS) and titanium (Ti) matrix welded by explosion were ...SS steel and Ti sandwich were machined by mechanical cutting to avoid any change in ...

3

Infrared Spectroscopy of Titania Sol-Gel Coatings on 316L Stainless Steel

Infrared Spectroscopy of Titania Sol-Gel Coatings on 316L Stainless Steel

... the steel substrate is respon- sible for the increase of the corrosion resistance of the stainless ...316 steel using titania-silica and alu- mina-silica sol-gel ...the stainless steel ...

8

Investigation of Austenitic Stainless Steel Coatings on Mild Steel Produced by Friction Surfacing Using a Conventional CNC Machining Center

Investigation of Austenitic Stainless Steel Coatings on Mild Steel Produced by Friction Surfacing Using a Conventional CNC Machining Center

... the stainless steel coating performance in acid media (in which stainless steels are commonly applied) the electrochemical corrosion behaviour of a selected coating and the consumable rod material ...

11

Load-deflection analysis of flat and corrugated stainless steel diaphragms

Load-deflection analysis of flat and corrugated stainless steel diaphragms

... corrugated stainless steel (SS-304, ASTM A240) diaphragm has been ...corrugated stainless steel diaphragms are performed to compare the sensitivity of the flat and corrugated ...

4

Structural and Magnetic Properties of Duplex Stainless steel (UNS S31803) Powders Obtained by high Energy Milling of Chips with Additions of NbC

Structural and Magnetic Properties of Duplex Stainless steel (UNS S31803) Powders Obtained by high Energy Milling of Chips with Additions of NbC

... duplex stainless steels with a possible transformation of the martensite phase induced by deformation, from the austenitic ...nanocrystalline stainless steel powder by ball milling of austenitic ...

6

Joining Copper to Stainless Steel by Friction Stir Diffusion Process

Joining Copper to Stainless Steel by Friction Stir Diffusion Process

... thick stainless steel) and type 2 (using 6 mm thick stainless steel) have some common parameters in order to compare the binding to different ...carbon steel (thickness = ...

95

Embrittlement and Corrosion Decay of a Cast Duplex Stainless Steel

Embrittlement and Corrosion Decay of a Cast Duplex Stainless Steel

... standard specifications for castings of austenitic-ferritic steels. Cr and Ni contents are typical of grade UNS J93404 (similar to wrought grade UNS S32750), but the Mo and N are lower than the minimum content specified ...

5

Application of silicalite for improvement of enzyme adsorption on the stainless steel electrodes

Application of silicalite for improvement of enzyme adsorption on the stainless steel electrodes

... of stainless steel electrodes are quite perspective for the development of conductomet- ric ...the stainless steel electrodes have been found to be high- sensitive to conductance changes, have ...

7

Preparation and characterization of stainless steel 316L/HA biocomposite

Preparation and characterization of stainless steel 316L/HA biocomposite

... biocomposite stainless steel 316L/HA were prepared in order to combine mechanical strength of stainless steels with the bioactivity of ...of stainless steel 316L and ...

6

Stainless Steel Bonded to Concrete: An Experimental Assessment using the DIC Technique

Stainless Steel Bonded to Concrete: An Experimental Assessment using the DIC Technique

... composites, stainless steel has a more com- plex constitutive behaviour, which may change or even eliminate conventional ways of finding the bond–slip rela- ...

20

INVESTIGATING SPOT WELD GROWTH ON 304 AUSTENITIC STAINLESS STEEL (2 mm) SHEETS

INVESTIGATING SPOT WELD GROWTH ON 304 AUSTENITIC STAINLESS STEEL (2 mm) SHEETS

... Resistance spot welding (RSW) has revolutionized automotive industries since early 1970s for its mechanical assemblies. To date one mechanical assembly out five is welded using spot welding technology in various ...

8

Determination of the Stress and Resistivity of Stainless Steel Foams

Determination of the Stress and Resistivity of Stainless Steel Foams

... cell stainless steel foams under tension and studying comprehensively the effect of porosity, cell wall thickness on their mechanical ...cell stainless steel foams with relative densities of ...

5

Stainless Steel As A Structural Material: State Of Review

Stainless Steel As A Structural Material: State Of Review

... of stainless steel as a ...for stainless steels to be considered as primary structural ...introduces stainless steel alloys and briefly discusses the important properties and commercial ...

6

Wire Arc Additive Manufacturing (WAAM) Process Analysis on Stainless Steel Built Samples

Wire Arc Additive Manufacturing (WAAM) Process Analysis on Stainless Steel Built Samples

... temperatures; Steel (ER316LSi, SMV3S, ER2209 duplex) used on the assembly and repair of stainless-steel parts, boilers and tubes, in under pressure equipment, in metallic constructions that do not ...

183

art hfgabreu  of Widmanst tten austenite in duplex stainless steel weld metal

art hfgabreu of Widmanst tten austenite in duplex stainless steel weld metal

... Two kinds of austenite grow from d-ferrite during the cooling of the duplex stainless steel weld deposits studied here, Widmansta¨tten plates and allotriomorphs which precipitate at d–d grain boundaries. It ...

8

Effect of volume fraction of phases and precipitates on the mechanical behavior of UNS S31803 duplex stainless steel

Effect of volume fraction of phases and precipitates on the mechanical behavior of UNS S31803 duplex stainless steel

... structure on the mechanical behavior. Specimens with a thickness of 1.8 mm were prepared according to ASTM standards and tested at room temperature. Tensile tests were conducted using displacement con- trol at a rate of ...

7

Show all 889 documents...

temas relacionados