Surface treatment
Effect of Different Surface Treatment on Shear Bond Strength of Veneering Composite to Polyetherketone Core Material
... for surface roughening. Several methods have been proposed for surface treatment of PEEK to enhance its bond to composite ...for surface treatment of different ...porous surface ...
6
Effect of a milling surface treatment on the properties of metal hydride alloy particles.
... MILLING SURFACE TREATMENT ON THE PROPERTIES OF METAL HYDRIDE ALLOY ...this treatment is investigated for the activation time, hydrogen storage capacity and equilibrium pressure, cycling stability and ...
7
Tratamento da superfície de zircônia para cimentação: uma revisão da literatura/Zirconia surface treatment for cementation: a literature review
... include surface treatment methods to achieve a satisfactory condition of zirconia adhesion to resinous ...of surface treatment of prosthetic crowns of yttrium- stabilized polycrystalline ...
17
Controlled Surface Treatment of Mild Steel with Carbon Nanotubes at Austenitic Temperature
... defined number of boost and diffusion processes at this temperature and cooling to room temperature under the same condition. The cross-sections of the as–received and carburized mild steel samples were carefully ...
5
Study of microleakage at class V cavities prepared by Er : YAG laser using rewetting surface treatment
... Re-wetting surface just after Er:YAG irradiation and chemical treatment with phosphoric acid using HEMA aqueous solution seems to improve the quality of bioattachment between the adhesive system and ...
5
INFLUENCE OF SURFACE TREATMENT AND PURIFICATION METHODS OF CO-115M GLASS-CERAMICS ON OPTICAL CONTACT STRENGTH
... Subject of Research. We present findings of the optical contact for details made of СО-115М glass-ceramics brand mark. The optical contact is the main method of joining parts made of CO-115M glass-ceramics brand mark in ...
7
J. Appl. Oral Sci. vol.11 número3
... vs. surface treatment) and Tukey’s test were: SU ...conventional surface treatment, and SU ...after surface treatment using sodium ...conventional surface treatment ...
6
Braz. Dent. J. vol.25 número4
... the surface treatment (n=10) of the opaque and cylindrical/conical fiberglass posts (Exacto; Angelus, size 2, with ...post surface using a microbrush for 1 min, dried for 1 min and the silane ...
7
Braz. J. Oral Sci. vol.12 número3
... 10000) and the Tesc 3.13 software. Data were analyzed statistically by ANOVA and Tukey’s test with a significance level of 5%. Results: Difference was observed between groups (p<0.05). Regarding the IT, MP and MS ...
6
Braz. Dent. J. vol.24 número6
... the surface treatment: Group I: the posts were treated with silane agent for 30 s and adhesive; Group II: the posts were cleaned with alcohol before treatment with silane agent and adhesive; Group ...
4
Braz. Dent. J. vol.27 número5
... whether surface treatment improves zirconia-porcelain ...zirconia surface treatments were performed as follows: no treatment (C); tribochemical silica coating (TBS); glaze application + ...
5
Cerâmica vol.61 número358
... surface treatment, although this is not always statistically better than the other treatments involving roughening of this surface, followed by silane ...
7
J. Appl. Oral Sci. vol.20 número5
... implant surface roughness. A screw-shaped design and a surface with an average roughness of Sa of 1-2 µm showed a better ...used surface treatment ...of treatment allows for a wide ...
6
Braz. Dent. J. vol.26 número1
... various surface treatment ...similar surface treatments groups, reported better results for the Rocatec group than those observed in the present ...entire surface of the bracket base followed ...
5
Braz. Dent. J. vol.25 número4
... of surface treatment on the osteoinduction and, therefore, on the ...with surface treatment (COTS), cylindrical with surface treatment (CTS), cylindrical with double ...
3
Evaluation of titanium implants with surface modification by laser beam. Biomechanical study in rabbit tibias
... with surface modi- ication by laser (Nd:YAG) in comparison with implants with machined ...each surface treatment in the tibia, machined surface (MS) and laser-modiied surface ...0.05). ...
7
Braz. oral res. vol.22 número2
... this surface treatment was found not to be effective on changing surface morphology in this ceramic due to its microstructure and composi- ...
6
Comparison of the Effect of Nd:YAG Laser and Sandblasting on Shear Bond Strength of a Commercial Ni-Cr Alloy to Porcelain
... Kim et al (9) studied the effect of Nd:YAG laser (energy and frequency levels of 120 mJ and 50 Hz, respectively) on shear bond strength at the titanium‒ ceramic interface in comparison with machining, airborne-particle ...
6
Polishing of Ground Y-TZP Ceramic is Mandatory for Improving the Mechanical Behavior
... processing surface treatments (polishing, heat treatment and glazing), on the surface characteristics (micromorphology and roughness) and on the structural stability (phase transformation and ...
9
Dental Press J. Orthod. vol.18 número4
... to surface treatment and bonding material: G1 – surface roughening with Soflex and bonding with Duralay; G2 – roughening with aluminum oxide blasting and bonding with Duralay; G3 – application of ...
6