Top PDF Analysis of Slender Aircraft Structures using the Finite Element Method
Analysis of Slender Aircraft Structures using the Finite Element Method
... motivate the development of the present ...quick analysis. Other motivation for the development of a structural analysis code is that it could be incorporated in an ...
88
Finite Element Analysis of Wheel Rim Using Abaqus Software
... static analysis of wheel rim made with materia ls like allu miniu m alloy, steel alloy, forged steel and magnesium alloy is ...done. The fin ite ele ment method is a powerful tool or ...
4
VIBRATION ANALYSIS ON A COMPOSITE BEAM TO IDENTIFY DAMAGE AND DAMAGE SEVERITY USING FINITE ELEMENT METHOD
... The objective of this paper is to develop a damage detection method in a composite cantilever beam with an edge crack has been studied using finite element ...number of ...
24
Lat. Am. j. solids struct. vol.14 número11
... description of the formulation and implementation of the Atomistic Finite Element Method (AFEM), exemplified in the analysis of one- and ...
21
Lat. Am. j. solids struct. vol.10 número1
... subject of the present work is the numerical verification and experimental validation of the FEM model which would enable us to analyse the vibrations of collecting ...
20
MODELLING AND OPTIMISATION OF A BIMORPH PIEZOELECTRIC CANTILEVER BEAM IN AN ENERGY HARVESTING APPLICATION
... output of a cantilever beam is directly related to the shape. What is the best design of a trapezoidal cantilever beam that generates the maximum power density? To answer this question, ...
16
Performance and optimization of annular fins by using finite element analysis
... Abstract- The main purpose of extended surfaces called fins to increase the heat transfer ...transfer. The selection of a particular fin configuration in any heat transfer application ...
10
GBT-Based Buckling Analysis using the Exact Element Method
... analyse the structural behaviour of prismatic thin-walled members and structural systems, expresses the member local and/or global deformed configuration as a combination of cross-section ...
24
eve asholanda Optimization of Laminated Tubes Using Finite Element Analysis
... design of laminated tubes. Only symmetric laminates are considered. The design variables are the number of plies and the thickness and fiber orientation of each ply on the ...
21
Rev. Esc. Minas vol.66 número4
... model using the Finite Element Method (FEM) for the nonlinear static and dynamic analysis of reinforced concrete (RC) beams, plates and shells is presented in this ...
6
Lat. Am. j. solids struct. vol.9 número1
... In the present paper, the ultimate load of the reinforced con- crete slabs [16] is determined using the finite element method and mathematical ...
25
Crack Formation Analysis of Return Air Flow Clamping in Air Conditioning using Finite Element Method
... [1]. The selection of plastics type and their properties are crucial since these could affect the quality and performance of the parts during ...general, the failures that have ...
4
Analysis of transformation plasticity in steel using a finite element method coupled with a phase field model.
... adopted the PFM proposed by Cha et al. [16] to describe the ferrite growth in the polycrystalline austenite ...microstructure. The effect of transformation stress, which requires ...
9
Lat. Am. j. solids struct. vol.10 número6
... Nonlinear analysis of reinforced concrete shells is an important subject ...tigation of capacity and safety aspects, concrete structures require to establish that the entire struc- ...
26
MODELING OF CRACK PROPAGATION IN A PREMOLAR TOOTH USING FINITE ELEMENT METHOD
... fracture of a vital posterior tooth that involves the dentine and occasionally extends into the ...understand the characteristics of the cracked tooth syndrome, a cracked ...
57
Finite Element Analysis of the Crack Propagation for Solid Materials
... statement: The use of fracture mechanics techniques in the assessment of performance and reliability of structure is on increase and the prediction of crack propagation in ...
7
Nonlinear Dynamics Analysis of FGM Shell Structures with a Higher Order Shear Strain Enhanced Solid-Shell Element
... dynamic analysis of FGM shells, one find the work of Vel and Batra (2004) based on three dimensional exact solutions for free and forced vibrations of simply supported FGM rectangular ...
20
Lat. Am. j. solids struct. vol.14 número9
... on the dynamic analysis of Euler-Bernoulli beams using curvature and curvature derivative-based finite element ...based finite element method (CFE) instead ...
19
LINEAR ELASTIC BEHAVIOUR OF CYLINDRICAL SHELL
... investigation of structural behavior of cylindrical concrete shell is carried out by using finite element method of ...analysis. The linear elastic ...
7
Modeling the creep behavior of GRFP truss structures with Positional Finite Element Method
... presents the development of a formulation, based on Positional Finite Element Method, to describe the viscoelastic mechanical behavior of space ...trusses. The ...
18
