• Nenhum resultado encontrado

[PDF] Top 20 Effect of surface treatments on the bond strength of a resin cement to commercially pure titanium

Has 10000 "Effect of surface treatments on the bond strength of a resin cement to commercially pure titanium" found on our website. Below are the top 20 most common "Effect of surface treatments on the bond strength of a resin cement to commercially pure titanium".

Effect of surface treatments on the bond strength of a resin cement to commercially pure titanium

Effect of surface treatments on the bond strength of a resin cement to commercially pure titanium

... For cement metal restorations, resin cement seems to be a suitable option because it shows the best combination of physical and mechanical properties when compared to zinc ... See full document

6

Study of thermocycling effect on the bond strength between an aluminous ceramic and a resin cement

Study of thermocycling effect on the bond strength between an aluminous ceramic and a resin cement

... blocks of alumina ceramic were used (Procera AllCeram) with dimensions of 15x6x6mm, obtained by CAD- CAM technology (Computer Assisted Design - Computer Assisted Machining) that makes frameworks constituted ... See full document

5

Bond strength of a composite resin to an adhesive luting cement

Bond strength of a composite resin to an adhesive luting cement

... evaluated the influence of surface treatment on the shear bond strength of a composite resin (CR), previously submitted to the application ... See full document

5

Avaliação da cimentação de pinos não metálicos na dentina intraradicular utilizando cimentos resinosos auto-adesivos

Avaliação da cimentação de pinos não metálicos na dentina intraradicular utilizando cimentos resinosos auto-adesivos

... Surface treatments are common methods for improving the general adhesion properties of a material, thereby enhancing chemical and micromechanical union between different ...Nevertheless, ... See full document

115

J. Appl. Oral Sci.  vol.17 número5

J. Appl. Oral Sci. vol.17 número5

... bjective: The objective of this study was to evaluate the effect of desensitizing agents containing different amounts of fluoride on the shear bond ... See full document

6

Effect of composite surface treatment and aging on the bond strength between a core build-up composite and a luting agent

Effect of composite surface treatment and aging on the bond strength between a core build-up composite and a luting agent

... cemented to each other (n=8) and sectioned into sticks. Half of the specimens from each block were immediately tested for microtensile bond strength (µTBS), while the other half ... See full document

8

Braz. oral res.  vol.27 número1

Braz. oral res. vol.27 número1

... modify the GFP morphology and interfere with the it within the root canal, potentially inluencing the long-term reliability of the ...Chemical treatments have the ... See full document

3

Braz. Dent. J.  vol.19 número2

Braz. Dent. J. vol.19 número2

... evaluated the effect of chemical and mechanical surface treatments for cast metal alloys on the bond strength of an indirect composite resin ... See full document

5

Effect of surface pretreatments on the microtensile bond strength of lithiumdisilicate ceramic repaired with composite resin

Effect of surface pretreatments on the microtensile bond strength of lithiumdisilicate ceramic repaired with composite resin

... aim of this study was to evaluate the influence of ceramic surface treatments and silane drying temperature on the microtensile bond strength (μTBS) ... See full document

4

Braz. Dent. J.  vol.23 número5

Braz. Dent. J. vol.23 número5

... aim of this study was to evaluate the influence of microstructure and composition of basic alloys on their microshear bond strength (µsBs) to resin ... See full document

6

In Vitro Evaluation of Various Surface Treatments of Fiber Posts on the Bond Strength to Composite Core

In Vitro Evaluation of Various Surface Treatments of Fiber Posts on the Bond Strength to Composite Core

... Introduction: The reliable bond at the root-post-core interface is critical for the clinical success of post-retained ...restorations. To decrease the risk of ... See full document

8

The studies of scale surface produced on outer diffusion layers

The studies of scale surface produced on outer diffusion layers

... resistance to oxidation and corrosion in aggressive environments, and high resistance to abrasion recommend intermetals with all their valuable performance properties to be used as a material for ... See full document

4

Evaluating the influence of selected parameters on sensitivity of a numerical model of solidification

Evaluating the influence of selected parameters on sensitivity of a numerical model of solidification

... series of analyses indicate lack of dependence of certain sensitivity analysis ...case of increasing the parameter r (the number the matrix B* is generated) obtaining ... See full document

6

Mg63 osteoblast-like cells response to surface modified commercially pure titanium

Mg63 osteoblast-like cells response to surface modified commercially pure titanium

... Comparing the results from the etched and anodized samples, it is clear the faster evolution of the cells size on the etched surface, for all periods of time ... See full document

117

Effect of heat treatment parameters on the properties of low-alloy cast steel with microadditions of vanadium

Effect of heat treatment parameters on the properties of low-alloy cast steel with microadditions of vanadium

... gives the results of mechanical tests carried out on the low-alloy cast steel with additions of vanadium and compares them with the results of previous studies made ... See full document

4

J. Appl. Oral Sci.  vol.23 número3

J. Appl. Oral Sci. vol.23 número3

... analysis. The other slices were sectioned into 0.8 mm x 0.8 mm sticks to microtensile bond strength test ...difference on bond strength among groups ...regarding ... See full document

6

J. Appl. Oral Sci.  vol.19 número4

J. Appl. Oral Sci. vol.19 número4

... This study evaluated the effect of laser welding on the titanium ceramic tensile bond strength and showed higher tensile bond strength in the specimens subjected to aluminum oxide air[r] ... See full document

5

Selection of the temperature of casting the bronzes to plaster moulds

Selection of the temperature of casting the bronzes to plaster moulds

... opinion of the influence of the temperature of casting on the size of the volumetric contraction, the studied grades of the bronze, it ... See full document

6

A Method To Find The Area Of Sector Without The Usage Of Angle Made By The Chord

A Method To Find The Area Of Sector Without The Usage Of Angle Made By The Chord

... that to find the area of sector the angle made by the chord (that is chord which divides the circle) is ...in the below method we find the ratio of ... See full document

2

Protein effect on the corrosion behaviour of titanium modified by two surface treatments

Protein effect on the corrosion behaviour of titanium modified by two surface treatments

... possible to attach ion into the superficial layer of the ...According to Zhu et al. (2001) implants have the ability to bond directly to the bone if ... See full document

69

Show all 10000 documents...