• Nenhum resultado encontrado

[PDF] Top 20 Failure behavior modeling of slender reinforced concrete columns subjected to eccentric load

Has 10000 "Failure behavior modeling of slender reinforced concrete columns subjected to eccentric load" found on our website. Below are the top 20 most common "Failure behavior modeling of slender reinforced concrete columns subjected to eccentric load".

Failure behavior modeling of slender reinforced concrete columns subjected to eccentric load

Failure behavior modeling of slender reinforced concrete columns subjected to eccentric load

... [r] ... See full document

22

Lat. Am. j. solids struct.  vol.14 número7

Lat. Am. j. solids struct. vol.14 número7

... analysis of RC beam-column connections with joint shear failure as the governing failure mode is performed using ...order to properly simulate the behavior of connections and the ... See full document

26

Failure behavior monitoring and evaluation of steel–confined reinforced concrete columns by acoustic emission under quasi-static loading

Failure behavior monitoring and evaluation of steel–confined reinforced concrete columns by acoustic emission under quasi-static loading

... unconfined columns constantly absorb energy, and the dissipated energy increased slowly, nearly no accumulation of AE ...corresponding to Stage 2, this stage specifies the ability of material ... See full document

18

Aspects of Finite Element Modeling of Punching Shear Behavior of Reinforced Concrete Flat Slabs

Aspects of Finite Element Modeling of Punching Shear Behavior of Reinforced Concrete Flat Slabs

... series of nonlinear FE analyses was conducted in this paper to model the punching shear failure of RC flat ...test of different modeling choices in order to evaluate their ... See full document

22

Rev. IBRACON Estrut. Mater.  vol.5 número4

Rev. IBRACON Estrut. Mater. vol.5 número4

... Reinforced concrete codes worldwide establish that the design of slender columns must ensure that under the most unfavorable load combina- tion, there is neither instability nor ... See full document

7

PARAMETRIC STUDY OF REINFORCED CONCRETE PLANE  FRAMES STRUCTURES THROUGH OPTIMIZATION

PARAMETRIC STUDY OF REINFORCED CONCRETE PLANE FRAMES STRUCTURES THROUGH OPTIMIZATION

... optimization of reinforced concrete plane frames. To achieve these objectives, the total cost, composed by the costs of concrete, steel and formworks was minimized by the usage ... See full document

10

Rev. IBRACON Estrut. Mater.  vol.8 número5

Rev. IBRACON Estrut. Mater. vol.8 número5

... the columns referring to “2”, “5”, “8”, “11”, “14”, “17”, “20”, “23” and “26” cases, whose stress magnitude is of ...due to AAR, virtu- ally, ...were to be expected because that ... See full document

13

Reuse of Lathe Waste Steel Scrap in Concrete Pavements

Reuse of Lathe Waste Steel Scrap in Concrete Pavements

... study of the workability and mechanical strength properties of the concrete reinforced with industrialized waste fibers or the recycled ...form of steel scraps are yield by the lathe ... See full document

10

Rev. IBRACON Estrut. Mater.  vol.7 número1

Rev. IBRACON Estrut. Mater. vol.7 número1

... This paper presents the structural behavior of six reinforced concrete pile caps in rectangular arrangement, considering the ground deformability of pile support, different concrete str[r] ... See full document

11

Analysis of Multistoried Building with Masonry infills under Earthquake Loading

Analysis of Multistoried Building with Masonry infills under Earthquake Loading

... In this design approach the structures are designed in such a way so that plastic hinges can form only in predetermined positions and in predetermined sequences. The concept of this method is to avoid ... See full document

7

Rev. IBRACON Estrut. Mater.  vol.6 número2

Rev. IBRACON Estrut. Mater. vol.6 número2

... iber reinforced polymers) bonded with epoxy resin and PBO- FRCM to reinforce concrete beams were performed by Di Tomma- so et ...lexure failure of the beams strengthened with PBO-FRCM ... See full document

8

Infl uence of Temperature Cycles on Bond between Glass Fiber-Reinforced Polymer and Concrete

Infl uence of Temperature Cycles on Bond between Glass Fiber-Reinforced Polymer and Concrete

... performance of beams externally strengthened with FRP over time are required to design and assess durability of those ...Deterioration of adhesively bonded joints FRP/concrete can cause ... See full document

12

Behavior of fiber reinforced mortar composites under impact load

Behavior of fiber reinforced mortar composites under impact load

... strength of the specimens was tested according to EN 12390-3 ...strength of the plain mortar is greater than compressive strength of fiber reinforced ...strength of ... See full document

13

Estudo do colapso progressivo de pórticos planos de concreto armado via análise não linear

Estudo do colapso progressivo de pórticos planos de concreto armado via análise não linear

... 51. OLIVEIRA, C. et al. Computational analysis of a RC planar frame using corotarional multilayared beam FE, correlated to experimental results. In: IBERIAN LATIN AMERICAN CONGRESS ON COMPUTATIONAL METHODS ... See full document

113

Rev. IBRACON Estrut. Mater.  vol.5 número3

Rev. IBRACON Estrut. Mater. vol.5 número3

... belong to Brazilian Federal Roads net- work allowed them to be characterized by age, dimension and the number of spans, structural systems, standard vehicle-load and the stability and ... See full document

16

Probabilistic Assessment of Serviceability of FRP- Reinforced Concrete Beams

Probabilistic Assessment of Serviceability of FRP- Reinforced Concrete Beams

... order to obtain the statistics of deflections for each of the eighty-one GFRP-RC beams designed according to ACI 440 ...Probabilities of failure (and corresponding reliability ... See full document

125

Rev. IBRACON Estrut. Mater.  vol.10 número6

Rev. IBRACON Estrut. Mater. vol.10 número6

... the behavior of reinforced concrete beams strengthened in bending by the addition of concrete and steel on their tension side and having expansion bolts as shear connectors at ... See full document

14

FIRE SAFEFf ENGINEERING: A DESIGN TOOLA TTHE DISPOSAL OF CODES OF PRACTICE AND REGULATIONS INGENIERIE DE LA SECURITE-INCENDIE: UN OUTIL DE CÕNCEPTION AU SERVICE DE LA REGLEMENTATION

FIRE SAFEFf ENGINEERING: A DESIGN TOOLA TTHE DISPOSAL OF CODES OF PRACTICE AND REGULATIONS INGENIERIE DE LA SECURITE-INCENDIE: UN OUTIL DE CÕNCEPTION AU SERVICE DE LA REGLEMENTATION

... The reinforced concrete befrween flanges increases fíre resistance, corrosion resistance, load bearing, bending stiffness, without enlarging the overall size of bare steel cros[r] ... See full document

19

Rev. IBRACON Estrut. Mater.  vol.9 número5

Rev. IBRACON Estrut. Mater. vol.9 número5

... set of partial safety fac- tors that are applied to all structures present in the implementation scope of the ...types of structural elements designed with such coeicients do not have uni- ... See full document

14

Rev. IBRACON Estrut. Mater.  vol.10 número5

Rev. IBRACON Estrut. Mater. vol.10 número5

... Aiming to verify the applicability of the γ z coeficient in the cal- culation of the global critical load, three real reinforced concrete buildings, built or under construction ... See full document

14

Show all 10000 documents...