• Nenhum resultado encontrado

[PDF] Top 20 Lat. Am. j. solids struct. vol.11 número14

Has 10000 "Lat. Am. j. solids struct. vol.11 número14" found on our website. Below are the top 20 most common "Lat. Am. j. solids struct. vol.11 número14".

Lat. Am. j. solids struct.  vol.11 número14

Lat. Am. j. solids struct. vol.11 número14

... Latin American Journal of Solids and Structures 11 (2014) 2537-2554 As mentioned in Subsection 3.1, the choice of number of Trefftz functions, m , which may affect the accuracy and convergence of the ... See full document

18

Lat. Am. j. solids struct.  vol.11 número14

Lat. Am. j. solids struct. vol.11 número14

... Also, by increasing this dimensionless parameter, the crankshaft amplitude at zone of transient is decreased and both crankshaft and TVD have single- valued at zone of steady state.. Fi[r] ... See full document

24

Lat. Am. j. solids struct.  vol.11 número14

Lat. Am. j. solids struct. vol.11 número14

... Analytical solutions for the buckling configurations of beams and the natural frequencies of vibration around the buckled beam are obtained for a variety of non-classical boundary cond[r] ... See full document

21

Lat. Am. j. solids struct.  vol.11 número14

Lat. Am. j. solids struct. vol.11 número14

... of Solids and Structures 11 (2014) 2607-2623 Moreover, the influences of the friction coefficient and internal pressure are studied and the re- sults for V 0 = 10m/s and 25m/s with the material parameters ... See full document

17

Lat. Am. j. solids struct.  vol.11 número14

Lat. Am. j. solids struct. vol.11 número14

... Latin American Journal of Solids and Structures 11 (2014) 2696-2712 and Gunay, 2011), Sucuo ğlu and Günay proposed generalized pushover analysis (GPA) proce- dure. Maximum value of a response parameter can ... See full document

17

Lat. Am. j. solids struct.  vol.11 número14

Lat. Am. j. solids struct. vol.11 número14

... Figures 10 and 11 reveals that the variation of quality factor with the dimensionless frequency for the flexural symmetric modes with and without thermal signal. The quality factor is quite high at lower range of ... See full document

18

Lat. Am. j. solids struct.  vol.11 número14

Lat. Am. j. solids struct. vol.11 número14

... In the third simulation, the autonomous vehicle and the obstacle are both moving on a circular road of 500 meter radius. The forward velocities are similar to those of the first simulation. The differ- ence between the ... See full document

18

Lat. Am. j. solids struct.  vol.11 número14

Lat. Am. j. solids struct. vol.11 número14

... Latin American Journal of Solids and Structures 11 (2014) 2648-2671 free end is a severe test. This test was performed with regular meshes. These meshes for triangular elements are made of each rectangular ... See full document

24

Lat. Am. j. solids struct.  vol.11 número14

Lat. Am. j. solids struct. vol.11 número14

... Latin American Journal of Solids and Structures 11 (2014) 2573-2588 one at the midpoint of each segment, and vibrations were excited by giving it manual impulse force. Impulse force in different ... See full document

16

Lat. Am. j. solids struct.  vol.11 número14

Lat. Am. j. solids struct. vol.11 número14

... of Solids and Structures 11 (2014) 2624-2647 Further, the effect of the wear depth on the journal surface is illustrated in Figure 15, where the initial and final geometric configurations are presented and ... See full document

24

Lat. Am. j. solids struct.  vol.11 número12

Lat. Am. j. solids struct. vol.11 número12

... Das, N.C., Lahiri, A., Sarkar, S. and Basu, S., (2008). Reflection of generalized thermoelastic surface waves from isothermal and insulated boundaries of a half-space Computers and Mathematics with Applications, ... See full document

30

Lat. Am. j. solids struct.  vol.11 número12

Lat. Am. j. solids struct. vol.11 número12

... Latin American Journal of Solids and Structures 11 (2014) 2122-2140 vibration and buckling forces of a carbon nanowire. An excellent survey of the research work on the classical model of CNTs can be found ... See full document

19

Lat. Am. j. solids struct.  vol.11 número12

Lat. Am. j. solids struct. vol.11 número12

... of Solids and Structures 11 (2014) 2099-2121 Tables 9 to 11 show the variation of frequency parameter against thickness parameter for circular cylindrical shells, when their boundary conditions are ... See full document

23

Lat. Am. j. solids struct.  vol.11 número12

Lat. Am. j. solids struct. vol.11 número12

... The solution is obtained by using the classical dynamic stiffness matrix (DSM), which is non-linear and transcendental in respect to the excitation frequency, and by performing the ha[r] ... See full document

32

Lat. Am. j. solids struct.  vol.11 número12

Lat. Am. j. solids struct. vol.11 número12

... Taking into account that the average sectional loss of reinforcing steel bars in real struc- tures is difficult to be evaluated and there is no nondestructive method available at present[r] ... See full document

16

Lat. Am. j. solids struct.  vol.11 número12

Lat. Am. j. solids struct. vol.11 número12

... Obviously, the deformations are slight until the stress threshold of >29 MPa and over this threshold, total buckling occurs and finally, a downward span and another upward hatch buckle. Also, the results report that ... See full document

24

Lat. Am. j. solids struct.  vol.11 número12

Lat. Am. j. solids struct. vol.11 número12

... of Solids and Structures 11 (2014) 2227-2240 physics involved is much more intricate as three quasi-elastic waves modes are coupled to the quasi-thermal wave ...thermoelastic solids with two ... See full document

14

Lat. Am. j. solids struct.  vol.11 número12

Lat. Am. j. solids struct. vol.11 número12

... Latin American Journal of Solids and Structures 11 (2014) 2241-2254 Other important subject for study is how to mitigate the vibrations. Different factors have been studied. Younesian and Sadri (2012) study ... See full document

14

Lat. Am. j. solids struct.  vol.11 número13

Lat. Am. j. solids struct. vol.11 número13

... Comparison of peak central point displacements of the sandwich foam panels with 50, 100, and 150 mm thick foam core with different relative densities show that the panels with foam rela[r] ... See full document

19

Lat. Am. j. solids struct.  vol.11 número12

Lat. Am. j. solids struct. vol.11 número12

... of Solids and Structures 11 (2014) 2271-2283 Experimental testing, finite element analysis, and theoretical buckling stress calculations con- ducted by Sukumar et ... See full document

13

Show all 10000 documents...