[1] Portaria n.º 949-A/2006 - RTIEBT - Regras Técnicas das Instalações Elétricas de Baixa
Tensão, Diário da República, 11 de setembro, 2006.
[2] Low-voltage electrical installations - Fundamental principles, assessment of general
characteristics, definitions, IEC 60364-1, 2012.
[3] Ewald Fuchs and Mohammad A. S. Masoum, Power Quality in Power Systems and
Electrical Machines. USA: Elsevier Academic Press, 2008.
[4] Kurt Schipman and François Delincé. The importance of good power quality. ABB Power
Quality Products. [Em linha]. pp. 1-20. Disponível:
https://library.e.abb.com/public/38ceb0497589318fc12577a5003d210c/Power%20quality%2
0improvement%20with%20LV%20capacitors%20and%20filters.pdf. [acedido: fevereiro,
02, 2014].
[5] Lance A. Irwin. “Real experience using power quality data to improve power distribution
reliability.” Presented in the 2010 14th International Conference on Harmonics and Quality
of Power (ICHQP ), Bergamo, 2010. [Em linha]. Disponível: http://www.schneider-
electric.com/solutions/ww/fr/med/4665021/application/pdf/1249_998-4530_electric- utilities_real-experience_e.pdf. [acedido: fevereiro, 10, 2014].
[6] Pedro Jorge Vieira Meireles, “Regimes de Neutro em Redes e Instalações de BT – Vantagens e Inconvenientes para segurança de Pessoas, Bens e para a Exploração do
Sistema”, Dissertação de mestrado, FEUP, Faculdade de Engenharia da Universidade do
Porto, Porto, 2012. [Em linha]. Disponível:
http://sigarra.up.pt/feup/en/publs_pesquisa.show_publ_file?pct_gdoc_id=300592. [acedido: abril, 05, 2014].
[7] B. Lacroix y R. Calvas. (2000, Octubre). Cuaderno Técnico nº 173 - Los esquemas de las
conexiones a tierra en el mundo y su evolución. Schneider Electric. [Em linha]. Disponível:
http://download.schneider-electric.com/files?p_Reference=CT-173-
Z002&p_EnDocType=Cahier%20Technique&p_File_Id=682511393&p_File_Name=CT17 3-v3.pdf. [acedido: abril, 04, 2014].
[8] Nuno Miguel Gonçalves de Castro Dinis Mariano, “Sistemas de Terra e Proteção Contra
Descargas Atmosféricas”, Dissertação de mestrado, IPS, Instituto Politécnico Viseu, Viseu,
Portugal, 2011. [Em linha]. Disponível:
http://comum.rcaap.pt/bitstream/123456789/4303/1/Sistemas%20de%20Terra.pdf [acedido:
abril, 05, 2014].
81 [10] J. D. M. McDonald, Electric Power Substations Engineering. 3rd Ed. London: CRC Press,
2012.
[11] Silvério Visacro Filho, Aterramentos Elétricos. São Paulo: Artliber Editora, 2002.
[12] H. Markiewicz and A. Klajan, Earthing Systems: Fundamentals of calculation and design,
Power Quality Application Guide, nr. 6.3.1. Wroclaw: Copper Devellopment Association,
2003. [Em linha]. Disponível: http://www.cooper.org. [acedido: outubro, 06, 2013].
[13] H. Markiewicz, A. Klajan, Earthing Systems: Basic Constructional Aspects, Power Quality
Application Guide, nr. 6. 5. 1. Wroclaw: Copper Devellopment Association, 2004 [Em
linha]. Disponível: http://www.cooper.org. [acedido: outubro, 06, 2013].
[14] Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and
test requirements, IEC 62040-3, 2011.
[15] Neil Rasmussen, Os diferentes tipos de sistemas de UPS, Aplicação Técnica nr. 1, APC by
Schneider Electric, 2010. [Em linha]. Disponível:
http://www.apcmedia.com/salestools/SADE-5TNM3Y/SADE- 5TNM3Y_R7_PT.pdf?sdirect=true. [acedido: janeiro, 06, 2015].
[16] Schneider Electric. (2009). Cahier Technique nr. 129, Schneider Electric, Grenoble, France.
[17] Uninterruptible power systems (UPS) – Part 1-1: General and safety requirements for UPS
used in operator access areas, IEC 62040-1-1, 2004.
[18] Uninterruptible power systems (UPS). General and safety requirements for UPS, EN 62040-
1-1, 2008.
[19] Uninterruptible power systems (UPS) – Part 1-2: General and safety requirements for UPS
used in restricted access locations, IEC 62040-1-2, 2002.
[20] Uninterruptible power systems (UPS). General and safety requirements for UPS used in
restricted access locations, EN 62040-1-2, 2003.
[21] Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and
test requirements, IEC 62040-3, 2012.
[22] Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and
test requirements, EN62040-3, 2012.
[23] Diretiva 73/23/CEE: Material elétrico destinado a ser utilizado dentro de certos limites de
tensão, CEE, 1973.
[24] Diretiva 93/68/CEE: Harmonização Técnica de Normalização, CEE, 1993.
[25] The new standard for low-voltage switchgear and controlgear ASSEMBLIES, IEC 60439,
82 [26] Safety of information technology equipment, IEC 60950, 1999.
[27] Safety of information technology equipment, EN 60950, 2000.
[28] Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for
low-frequency conducted disturbances and signalling in public low-voltage power supply systems, IEC 61000-2-2, 2002.
[29] Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency
conducted disturbances and signalling in public low-voltage power supply systems, EN 61000-2-2, 2002.
[30] Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase), IEC 61000-3-2, 2014.
[31] Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current ≤ 16 A per phase), EN 61000-3-2, 2014.
[32] Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of
harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A, IEC 61000-3-4, 1998.
[33] Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of
harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A, EN 61000-3-4, 1998.
[34] Electromagnetic compatibility (EMC) - Part 3-5: Limits - Limitation of voltage fluctuations
and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A, IEC 61000-3-5, 2009.
[35] Electromagnetic compatibility (EMC) - Part 3-5: Limits - Limitation of voltage fluctuations
and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A, EN 61000-3-5, 2009.
[36] Características da tensão fornecida pelas redes de distribuição pública de energia elétrica,
NP-EN 50160, 2010.
[37] Recommended Practice and Requirements for Harmonic Control in Electric Power Systems,
IEEE 519, 2014.
[38] Electrostatic Discharge Immunity Test, IEC 61000-4-2, 2012.
[39] Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques -
Electrostatic discharge immunity test, EN 61000-4-2, 1998.
[40] Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques -
83 [41] Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated,
radio-frequency, electromagnetic field immunity test, EN 61000-4-3, 2006.
[42] Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques -
Electrical fast transient/burst immunity test, IEC 61000-4-4, 2012.
[43] Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrical fast
transient/burst immunity test, EN 61000-4-4, 2012.
[44] Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques -
Surge immunity test, IEC 61000-4-5, 2014.
[45] Electromagnetic compatibility (EMC). Testing and measurement techniques. Surge
immunity test, EN 61000-4-5, 2014.
[46] Industrial, scientific and medical (ISM) radio-frequency Equipment. Electromagnetic
disturbance characteristics. Limits and methods of measurement, EN 55011, 2007.
[47] Specification for uninterruptible power systems (UPS). EMC requirements, EN 50091-2,
1996.
[48] Diretiva 89/336/CEE: Compatibilidade Eletromagnética, 1989.
[49] Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for
industrial environments, IEC 61000-6-4, 2006.
[50] Electromagnetic compatibility. Generic emission standard. Industrial environment, EN
50081-2, 1994.
[51] Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial
environments, IEC 61000-6-2, 2005.
[52] Electromagnetic compatibility. Generic immunity standard. Industrial environment, EN
50082-2, 1995.
[53] Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for
residential, commercial and light-industrial environments, IEC 61000-6-3, 2006.
[54] Instrument Electromagnetic compatibility. Generic emission standard. Residential,
commercial and light industry, EN 50081-1, 1992.
[55] Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for
residential, commercial and light-industrial environments, IEC 61000-6-1, 2005.
[56] Electromagnetic compatibility. Generic immunity standard. Residential, commercial and
light industry, EN 50082-1, 1998.
84 [58] Environmental management systems - Requirements with guidance for use, ISO 14001,
2004.
[59] Acoustics - Determination of sound power levels and sound energy levels of noise sources
using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane, ISO 3746, 2010.
[60] Acoustics - Measurement of airborne noise emitted by information technology and
telecommunications equipment, ISO 7779, 2010.
[61] Noise emitted by computer and business equipment. Method of measurement of airborne
noise, EN 27779, 1991.
[62] Schneider Electric. (2013). MGE Galaxy 7000-160-500 kVA – Installation Manual,
Schneider Electric, Grenoble, France.
[63] Schneider Electric. (2015). Electrical Installation Guide, Grenoble, France.
[64] FCC Part 15 - Regulations for low-power, transmitters, FCC, American Certification, 1996.
[65] APC by Schneider Electric. (2012). Fatores chave nas instalações da UPS, Lisboa, Portugal.
[66] Constantino Soares, Instalações Elétricas de Baixa Tensão – Projeto, Execução e
Exploração – Origem e interpretação das RTIEBT – 1ª Edição e principais diferenças face
ao “740/74”. Lisboa: CERTIEL e DGEG, 2006.
[67] Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents, IEC