4340–4349, 2007.
COSTA, A. R.; Modelagem computacional e análise do comportamento
de células a combustível de membrana polimérica em regime estático e
dinâmico de carga, Dissertação (Mestrado) – Universidade Federal de
Uberlândia, Uberlândia, 2005.
CUNHA, E. F.; Avaliação e aplicação de tecnologias de células a
combustível tipo PEM desenvolvidas no IPEN em um módulo de 500 We
de potência nominal. Tese (Doutorado em Ciências na Área de Tecnologia
Nuclear – Materiais) – IPEN – Instituto de Pesquisas Energéticas e Nucleares, São Paulo, 2009.
DOE; Fuel Cell Handbook, Seventh Edition, EG&G Technical Services, Inc. 2004.
DUBNO, W., GEVING, B.; Low Cost, High Efficiency, “High Pressure
Hydrogen Storage, DOE 2006 annual Progress Report Part IV”, p. 521–
524 , 2006.
EISENBERG, A.; YEAGER, H. Perfluorinated Ionomer Membranes. ACS Symposium Series 180. pg. 487, 1982.
FARADAY; SCHOEBEING; The letters and Schoenbein. Universidad de
California, 1989. Disponível em
http://www.archive.org/stream/lettersoffaraday00fararich. Acesso em 2014.
HAMANN, C. H.; HMEMNETT, A.; VIELSTICH, W.; Electrochemistry. Wiley- VHC, 1998.
HANDBOOK OF FUEL CELL. 5 Ed. EG&G Services, Parsons, INC., U.S Department of Energy. Science Applications International Corporation, 2000.
HANDBOOK OF FUEL CELL. Inc. Science Applications International Corporation Fuel Cell Handbook, Sixth Edition Morgantown, West Virginia U. S. Department of Energy, EG&G Technical Service, 2002.
HANDBOOK OF FUEL CELL Fundamentals Technology and Applications John Wiley & Sons Ltd., v.1, c.5, p.31, 2003.
HUANG, J. H.; BAIRD, D. G.; MCGRATH, J. E.; Development of fuel cell
bipolar plates from graphite filled wet-lay thermoplastic composite
materials, J. Power Sources, v. 150, p. 110–119, 2005.
KIRUBAKARAN, A. J., JAIN, S.; NEMA, R. K.; A review on fuel cell
technologies and power electronic interface, Renewable and Sustainable
Energy Reviews, v. 13, p. 2430–2440, 2009.
LABORDE, H., M., LEGER, J-M, LAMY, C., Etude prospective sur l’état
actuel de la connaissance dans le domaine des piles à combustible hydrogène oxygène à électrolyte polymère cationique. Contrat n°
896/CNES/93/0990, 124 p., 1995.
LARMINIE, J.; ANDREW D.; Fuel cell systems explained – 2nd ed. John Wiley & Sons Ltd, England, 2003.
LI, X.; SABIR, I.; Review of bipolar plates in PEM fuel cells: flow-field
LINARDI, M.; Introdução a Ciência e Tecnologias da Célula a
Combustível. São Paulo, SP.; ArtLiber Editora, 2010.
MA, Y-L.; Conductive of PBI membranes for high-temperature polymer
electrolyte fuel cell, J. Electrochem. Soc., v. 151, p. A8–A16, 2004.
MAHAN, B. H.; Química, em curso universitário. Edgar Blucher Ltda, 1997.
MARCHAND M.; Gestion de l’eau dans les piles à combustible, Ph.D. at the Institute Polytechnique de Grenoble, 2005, consultado através de http://www.sudoc.abes.fr/LNG=EN/. Acesso em 2014.
MARTINS, R., KRAJACIC, G., ALVES, L., DUIC, N., TOSTE, A. J., Selection
and installation of a hydrogen based energy storage. II Iberian Symposium
on Hydrogen, Fuel Cells and Advanced Batteries, Vila Real, September 13th– 17th 2009.
MENCH M.; Fuel Cell Engines. John Wiley & Sons, 1ª edição, 2008
NETO, R.; Células de Combustível de Electrólito Polimérico, tese de Doutoramento no Instituto Superior Técnico, Universidade Técnica de Lisboa, 2006.
NUNES, G. M. F.; Caracterização de pilha de combustível de hidrogênio
e monitorização de célula individual. Dissertação (mestre em Engenharia
Mecânica) – Instituto Superior Técnico, Universidade Técnica de Lisboa, 2010.
PAPAGEORGOPOULOS, D. D.; Fuel Cell technology program overview
and introduction to the fuel cell pre-solicitation workshop, in DOE fuel cell pre-solicitation workshop. Department of Energy, 2010.
PRATER, K., The renaissance of the solid polymer fuel cell, J. Power Sources, v. 29, p. 239–250, 1990.
RAISTRICK, I. D.; Electrode assembly for use in a solid polymer
electrolyte fuel cell. US Patente n° 4.876.115, 24 de outubro de 1989.
SANTIS, M.; Investigation of current density inhomogeneities in polymer
electrolyte fuel cell. Ph. Thesis, Swiss Federal Institute of Technology,
Zurich, 2006.
SANTOS, J. G. N.; Elaboração e caracterização de camada de difusão de
gás para células a combustível do tipo PEM. Dissertação (Mestre em
Engenharia) – Escola De Engenharia, Universidade Federal do Rio Grande do Sul, Porto Alegre – RS, 2011.
SANTOS, J. E.; Controle e automação de um sistema de energia elétrica
renovável: avaliação da célula a combustível H2/ar tipo PEM. Tese
(doutorado em Engenharia Química) – Universidade Federal de Campina Grande, Centro de Ciências e Tecnologias, Campina Grande, 2013.
SASAKI, H.; SOGA, T.; YATAKE, T.; KANO, A.; Development of 30 kW class
PEFC system with pure hydrogen fuel, FCDIC Fuel Cell Symp. Proc., v. 9;
p. 117–121, 2002.
SILVA, R. F.; Surface conductivity and stability of metallic bipolar plate
materials for polymer electrolyte fuel cells, Electrochim. Acta, v. 51, p.
3592–3598, 2006.
SMITHA, B., SRIDHAR, S., KHAN, A. A.; Solid polymer electrolyte
membranes for fuel cell applications – a review. J. Membrane Sci., v. 259,
p. 10–26, 2005.
SMITHSONIAN’S, National Museum of American History, Alkali Fuel Cell
History, Disponível em:
http://americanhistory.si.edu/fuelcells/images/059_020.jpg, acesso: 17 de agosto de 2016.
SOUZA, M. M. V.; Tecnologia do Hidrogênio. Rio de Janeiro, RJ, Synergia, 2009.
SRIDHAR, P.; Humidification studies on polymer electrolyte membrane
fuel cell, Fuel Energy Abstracts, p. 43–262, 2002.
STONE, C.; MORRISON, A. E.; From curiosity to power to chance the
world, Solid State Ionics; v. 152, p. 1–13, 2002.
TICIANELLI, E. A.; GONZALEZ, E. R.; Eletroquímica. EDUSP, 1998.
VIELSTICH, W.; LAMM, A.; GASTEIGER, H. A.; Handbook of fuel cells –
fundamentals, technology and applications, v. 1. England, John Willey &
Sons Ltda, 2003.
VOSS, H. H.; CHOW, C. Y.; Patent WO 93/06627, 1993.
WENDT, H.; GÖTZ, M.; LINARDI, M.; Tecnologia de Células a
Combustível. Química Nova, v. 23; n. 4, p. 538–546, 2000.
WANG, Y.; NORTHWOOD, D. O.; An investigation into TiN-coated 316L
stainless steel as a bipolar plate material for PEM fuel cells, J. Power
Sources, v. 165, p. 293–298, 2007.
WANG, Y.; NORTHWOOD, D. O.; An investigation of the electrochemical
properties of PVD TiN-coated SS410 in simulated PEM fuel cell
environments, Int. J. Hydrogen Energy, v. 32, p. 895–902, 2007.
WANG, Y.; CHEN, K. S.; MISHLER, J.; CHO, S. C.; ADROHER, X. C.; A
review of polymer electrolyte membrane fuel cell: Technology, applications, and needs on fundamental research. Applied Energy, v. 88,
WANG, Z-B.; ZUO, P. J.; CHU, Y-Y.; YIN, G-P.; Durability studies on
performance degradation of Pt/C catalysts of proton exchange
membrane fuel cell. Int. J. Hydrogen Energy, v. 34, p. 4387 – 4394, 2009.
WOLF, H.; WILLERT-PORADA, M.; Electrically conductive LCP-carbon
composite with low carbon content for bipolar plate application in
polymer electrolyte membrane fuel cell, J. Power Sources, v. 153, p. 41–
46, 2006.
WOLK, R.H.; Fuel cells for homes and hospitals. IEEE Spectrum. USA, p. 45-52, 1999.
WOLYNES, S. Técnicas eletroquímicas em corrosão. EdUSP – Editora da Universidade de São Paulo, p.38–48, 2003.
ZHANG, J.; High temperature PEM fuel cells, J. Power Sources, v. 160, p. 872–91, 2006.