Dentre os futuros trabalhos que podem ser elaborados para complementar e dar continuidade ao trabalho iniciado nesta dissertação sugere-se:
x Adaptar e utilizar um modelo de classificação e priorização de sistemas ou subsistemas críticos, considerando o impacto da degradação dos equipamentos da rebobinadeira na qualidade do produto;
x Analisar os impactos dos níveis de degradação dos equipamentos da rebobinadeira sobre a qualidade do produto;
89
x Definir condições operacionais mais adequadas para atingir altos índices de produtividade, principalmente no que diz respeito à velocidade máxima de operação visando atender à demanda crescente de aumento da produtividade de uma unidade de produção de películas bi orientada;
x Implantar uma estrutura de monitoramento baseado no acompanhamento contínuo de uma rebobinadeira visando uma excelência de desempenho e otimização do custo de manutenção.
x Elaborar modelos que possam sugerir uma política otimizada de manutenção considerando os custos de indisponibilidade, custos das intervenções de manutenção e custos ou impactos provenientes de problemas de qualidade decorrentes da degradação do equipamento;
x Correlacionar as atividades do RCM e CBM com a qualidade das bobinas, visto que o universo de causas para o problema de aparecimento de defeitos de bobinamento engloba diversas causas ligadas a outros modos de falha que não os relacionados ao equipamento. A dissertação busca auxiliar trabalhos futuros em trabalhos desta natureza.
x Estudar os efeitos da vibração no rebobinamento e as técnicas disponíveis para seu controle e eliminação visando obtenção de altos níveis de velocidade de operação e qualidade das bobinas.
90
REFERÊNCIAS
ADAMS G. E NOSONOVSKY, contact modeling – forces, Tribology International, vol. 33, pages 431 - 442, 2000.
ADJENGUE L., YACOUT S.,ILK O., Parameters Estimation for Condition Based Maintenance with Uncorrelated and Correlated Observations, Quality Engineering, Volume 19, Issue 3, pages 197 – 206, 2007.
ALBERT H.C.T., Condition Based Maintenance: tolls and decision making, Journal of Quality in Maintenance Engineering, vol. 1, pages 3-17, 1995.
.ALLEN H. T., LING-YAU CHAN, YONGDAO ZHOU, HAITAO LIAO, E.A. ELSAYED, Condition Based Maintenance of Periodically Inspected Systems, Proceedings of the World Congress on Engineering, vol. 2, 2009.
ALMEIDA A., SOUZA F, Decision Theory In Maintenance Strategy For A Two-Unit Redundant Standby System. IEEE Transactions on Reliability, IEEE RELIABILITY SOCIETY, vol. 42, no 3, pages 401-407, 1993.
ALMEIDA A, BOHORIS G., Decision Theory In Maintenance, Journal of Quality in Maintenance Engineering, vol. 1, no 1, pages 39-45, 1995.
ALMEIDA A., BOHORIS G., Decision theory in The Maintenance Strategy of a Standby System With Gamma Distribution Repair Time. IEEE Transactions on Reliability, vol. 45, no 2, pages 216-219, 1996.
BACKLUND F. E AKERSTEN P., RCM introduction: process and requirements management aspects, Journal of Quality in Maintenance, vol. 9, pages 250 - 264, 2003.
BARROS A., GRALL A. E BÉRENGUER C., Optimization of the Monitoring Device Performance for Preventive Maintenance Policy, IEEE, 2006.
BENGTSSON M., Supporting Implementation of Condition Based Maintenance: highlighting the interplay between Technical Constituents and Human and Organizational Factors, IGI Publishing, 2008.
CAVALCANTI R., documento interno de ajuste dos parâmetros de processo da rebobinadeira, Terphane LTDA, 2009.
91
CHABTHANOM W., Mechanical Reliability Management for recycle Gas Compressors Using Reliability Centered Maintenance (RCM), 23rd Conference of The Mechanical Engineering Network of Thailand, 2009.
CHANG-CHIUN H.A; CHI-CHUNG P. A;TSANN-TAY T.G, On-Line Tension Control for Polyester Film Processing , Polymer-Plastics Technology and Engineering, vol.47, Issue 2, pages 157 – 163, 2008.
CHANGWOO LEE, HYUNKYOO KANG, HOJOON KIM AND KEEHYUN SHIN, Effect of taper tension profile on t he telescoping in a winding process of high speed roll to roll printing systems, Journal of Mechanical Science and Technology, vol. 23, pages 3036 - 3048, 2009.
CHRISTER A.H., Developments in Delay Time Analysis for Modeling Plant Maintenance, The Journal of the Operational Research Society, Yield Management, vol. 50, no 11, pages 1120-1137, 1999.
CHRISTER A.H., WANG W., A simple condition monitoring model for a direct monitoring process, European Journal of Operational Research, vol. 82, Issue 2, pages 258- 269, 1995.
DIAS A., RIGONI E. E SILVA J., Sistema Baseado em conhecimento para gerenciamento dos fatores críticos da manutenção centrada em confiabilidade, sem data.
DIEULLE, L., BERENGUER, C., GRALL, A., ROUSSIGNOL, M.;. Continuous- Time Predictive-Maintenance Scheduling for a Deteriorating System. IEEE Transactions on Reliability, pages 150-155, 2001.
E. DELOUX, B. CASTANIER, C.BERENGUER,. Predictive maintenance policy for a gradually deteriorating system subject to stress, 2009.
FERREIRA R.J.P., ALMEIDA A. T., CAVALCANTE C.A.V., A multi-criteria decision model to determine inspection intervals of condition monitoring based on delay time analysis, Reliability Engineering & System Safety, Vol. 94, Issue 5, páginas 905 - 912, 2009.
HAKIEL, Z., Nonlinear model for wound roll stresses, Tappi Journal, vol 70, pages 113 -117, 1987.
HASEGAWA Katsumi, TABEI Tadashi, HIKITA Shinichi, SUZUKI Tamotsu and HORIKAWA Takeshi, Development of a System for Detecting Abnormal Vibration during High-Speed Winding, 2000.
92
HASHIMOTO H., JEENKOUR P. and MONGKOLOWONGROJN M, Optimum Winding Tension and nig load wound web for protecting wrinkles and slippage, Journal of Advanced Mechanical Design and Manufacturing, vol. 4, no1, 2010.
HASHIMOTO H., prediction model of paper-web wrinkling and some numerical calculation examples with experimental verifications, Microsyst Tecnol vol. 13, pages 933- 941, 2007.
HAZIN M, GARCEZ T, LINS P,SILVA B, ALMEIDA A, Análise multicritério das conseqüências definidas a partir da abordagem MCC: um estudo de caso, XXX Encontro Nacional de Engenharia de Produção, ENEGEP, 2010.
HAZIN M, Modelos de decisão multicritério baseados em MAUT na gestão de riscos em gasoduto de hidrogênio e na manutenção centrada em confiabilidade. Tese Doutorado – Universidade Federal de Pernambuco. CTG, Programa de Pós-Graduação em Engenharia de Produção, 2010
HENG A., ZHANGA S., TANA A. C.C. and Mathew J., Rotating machinery prognostics: State of the art, challenges and opportunities, Mechanical Systems and Signal Processing, vol. 23, Issue 3, pages 724-739, 2009.
HINGE, KATHLEEN, MANIATTY, ANTOINETTE, Model of steady rolling contact between layered rolls with thin media in the nip, Department of Mechanical Engineering, Aeronautical Engineering and Mechanics, Rensselaer Polytechnic Institute, Troy, New York, USA, 1998.
HONGYE W., Unified Methodology of Maintenance Management for Repairable systems Based on Optimal Stopping Theory, dissertation thesis, Beijing University of Chemical Technology, 1995.
IN GAO, JINJI AND LEE, JAY AND NI, JUN AND MA, LIN AND MATHEW, JOSEPH, EDS. Proceedings 3rd World Congress on Engineering Asset Management and Intelligent Maintenance Systems Conference 1, pages 1967-1980, 2002.
KAIO N. and OSAKI S., Comparison of Inspection Policies, Journal of Operational Research Society, vol. 40, pages 499 – 503, 1989.
LAWSON C., How predictive Analytics Helps Improve Critical Equipment Reliability, Pipeline and Gas Journal, page 74, 2010.
LEE C., LEE J., SHIN K E KWON S., A taper tension profile maker in a converting machine, Journal of Mechanical Science and Technology, vol. 22, pages 77 - 84, 2008.
93
LILBURN D.A., SPENCE C.L., Method and System for Assessing pulp and Paper Mill Performance, US Patent 6,950,777, 2005.
MARQUEZ A., MOREU DE LEON P., FERNANDEZ J.F., MARQUEZ C. E CAMPOS L., The maintenance management framework, Journal of Quality in Maintenance, vol. 15, pages 167 - 178, 2009.
MANUAL DE OPERAÇÃO DA UNIVERSAL 670, Kampf Gmbh & Co Maschinenfabrik, 2004.
MOUBRAY JOHN. Reliability-centered maintenance, 2nd edition, 1997.
PARK, K.S., Human Reliability – Analysis, Prediction and Prevention of Human Errors, Elsevier, Amsterdam, 1987.
RAUSAND M., Reliability centered maintenance, Reliability Engineering and System Safety, 1998.
ROISUM D., Thinking thin, 2003.
ROISUM D., The Mechanics of wrinkling, Finishing converting conference, 1996. ROISUM D., Winding: machines, mechanics and measurements, Tappi Press, DEStech Publications Inc, 2008.
RRYO T., MATSUZAKI K.,SUEOKA A. e MORITA C., “Countermeasures against Pattern Formation Phenomena of Thin Sheet Winder by Using Dynamic Absorbers”, Journal of System Design and Dynamics, vol. 3, no 5, pages 814-826, 2005.
SAE International, Evaluation Criteria for Reliability-Centered Maintenance (RCM) Processes, SAE JA1011, Warren dale, PA, USA, 1999.
SASAKI M., KOHNO K., TANIMOTO K., TAKAHASHI S., SUZUKI S. E HASHIMOTO H., Traction force between rotating rolls and moving web considering the effect of air-entrainment, Journal of Micro system Technologies, 2007.
SASAKI M., KOHNO K., TANIMOTO K., TAKAHASHI S., KOMETANI H. E HASHIMOTO H, In-roll Stress Analysis Considering Air-entrainment at the roll-inlet with the effect of grooves on Nip roll surface, Journal of Advanced Mechanical Design, Systems and Manufacturing, vol. 2, no 1, 2008.
SLACK, NIGEL, JOHNSTON R., BETTS A., Gerenciamento de operações e de processos, 2ª edição, São Paulo, Atlas, 2008.
94
SILVINI P., Desenvolvimento de banco de dados de confiabilidade: uma aplicação em estações redutoras de gás natural, Dissertação de Mestrado – Universidade Federal de Pernambuco. CTG. Engenharia de Produção, 2006.
SIQUEIRA I., Manutenção centrada em confiabilidade. 2ª edição, Recife, Qualimark, 2009.
SIQUEIRA I, Frequencia Ótima de Manutenção Centrada em Confiabilidade , Seminário Internacional de Mantenimiento Y Servicios Associados, CIER, Cartagena das Indias, Colombia, 2003.
SMITH A., Reliability centered maintenance, Mc Graw Hill, 1993.
SMITH D., Challenges in winding flexible packaging, Society of Plastic Engineer´s, Antec Conference, 2002.
TAI A., CHAN L., ZHOU Y. AND ELSAYED E., Condition Based Maintenance of Periodically Inspected Systems, Proceedings of World Congress on Engineering, vol. 2, 2009.
TSANG A., Condition-based maintenance: tools and decision making, Journal of Quality in Maintenance, vol. 1, pages 3 - 17, 1995.
TOMLINGSON P., Reliability-centered maintenance improves equipment health, Mining engineering , 2009.
YANABE S., TAKAHASHI K., YAMASHITA T., Web Winding Simulation and Wound Roll Stresses, Journal of Advanced Mechanical Design, Systems, and Manufacturing, vol. 4, no 1, pages 281-289, 2010.
YOUNG-DO JO E PARK KYO-SHIK, Dynamic management of human error to reduce total risk, Journal of Loss Prevention, vol. 16, pages 313- 321, 2003.
YUAN L, JÄVENPÄÄ V, Non linear vibrations in a covered roll system with viscoelastic contact, Commun Nonlinear Sci Numer Simulat, 2008.
WANG W., A two-stage prognosis model in condition based maintenance, European Journal of Operational Research, vol. 182, Issue 3, pages 1177-1187, 2007.
WANG J., JONES B. AND JENKINSON I., “Methodology of using delay-time analysis for a manufacturing industry”, Reliability engineering and System Safety, vol. 94, pages 111- 124, 2009.
WALLER, P., how to fix ugly rolls, Plastics touch point Graphics, Extrusion troubleshooting, disponível em: www.pfonline.com, acessado em 06/04/2010.
95
ZHOU, YIFAN AND MA, LIN AND SUN, YONG AND MATHEW, JOSEPH, Latent degradation indicator estimation using condition monitoring information, Queensland University of Technology, 2008.
ZHOU X., XI L. and LEE J., Reliability-centered Predictive Maintenance Scheduling for a Continuously Monitor System to Degradation, Reliability Engineering and System Safety, vol. 92, pages 530-534, 2007.