Sugestões para trabalhos futuros

Como trabalhos futuros, e na continuação do estudo deste tema, seria interessante aplicar o método de Taguchi a uma maior combinação de parâmetros, ou seja, aumentar o número de níveis em estudo, utilizando uma matriz adequada de forma a estudar a contribuição de cada um dos parâmetros durante o processo de furação. Uma outra proposta seria efetuar o mesmo estudo, mas com a gama de níveis utilizada pelos profissionais de saúde aplicada num caso real. Este método poderá ser aplicado em qualquer área em que o objetivo seja a otimização de parâmetros e o estudo da sua influência.

41

Referências bibliográficas

[1] V. A. Andrushko and J. W. Verano, “Prehistoric trepanation in the Cuzco Region of Peru: A view into an ancient andean practice,” Am. J. Phys. Anthropol., vol. 137, pp. 4– 13, 2012.

[2] S. Finger and H. R. Fernando, “E. George Squier and the discovery of cranial trepanation: a landmark in the history of surgery and ancient medicine,” J. Hist. Med.

Allied Sci., vol. 56, pp. 353–381, 2001.

[3] G. Augustin et al., “Cortical bone drilling and thermal osteonecrosis,” Clin. Biomech., vol. 27, pp. 313–325, 2012.

[4] J. Soriano, A. Garay, P. Aristimuño, L. M. Iriarte, J. A. Eguren, and P. J. Arrazola, “Effects of rotetional speed, feed rate and tool type on temperature and cutting forces when drilling bovine cortical bone,” Mach. Sci. Technol., vol. 17, pp. 611–636, 2013. [5] E. M. M. Fonseca, K. Magalhães, M. G. Fernandes, M. P. Barbosa, and G. Sousa,

“Numerical model of thermal necrosis due a dental drilling process,” Biodental Eng. II.

London Taylor Fr. Group, CRC Press. Porto J. Natal, al. (eds)., pp. 69–73, 2014.

[6] M. G. Fernandes, R. Nata, and E. M. M. Fonsec, “Three-dimensional dynamic finite element and experimental models for drilling processes,” Proc. intitution Mech. Eng.

Part L J. Mater. Des. Appl., pp. 1–9, 2015.

[7] V. P. Astakhov et al., Machining: Fundamentals and Recent Advances, vol. 53, no. 9. British Library Cataloguing, 2013.

[8] J. A. Ghani, I. A. Choudhury, and H. H. Hassan, “Application of Taguchi method in the optimization of end milling parameters,” J. Mater. Process. Technol., vol. 145, no. 1, pp. 84–92, 2004.

[9] M. Kurt, E. Bagci, and Y. Kaynak, “Application of Taguchi methods in the optimization of cutting parameters for surface finish and hole diameter accuracy in dry drilling processes,” Int. J. Adv. Manuf. Technol., vol. 40, no. 5–6, pp. 458–469, 2009.

[10] G. Augustin, S. Davila, K. Mihoci, T. Udiljak, D. S. Vedrina, and A. Antabak, “Thermal osteonecrosis and bone drilling parameters revisited,” Arch. Orthop. Trauma Surg., vol. 128, no. 1, pp. 71–77, 2008.

[11] A. Aggarwal and H. Singh, “Optimization of machining techniques — A retrospective and literature review,” Sadhana, vol. 30, no. 6, pp. 699–711, 2005.

[12] P. J. Ross, Taguchi Techniques for Quality Engineering, 2nd ed. McGraw-Hill, 1996. [13] R. K. Roy, Design of experiments using the Taguchi approach. John Wiley & Sons, inc,

2001.

[14] M. Nalbant, H. Gökkaya, and G. Sur, “Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning,” Mater. Des., vol.

42

28, no. 4, pp. 1379–1385, 2007.

[15] S. Pal, S. K. Malviya, S. K. Pal, and A. K. Samantaray, “Optimization of quality characteristics parameters in a pulsed metal inert gas welding process using grey-based Taguchi method,” Int. J. Adv. Manuf. Technol., vol. 44, no. 11–12, pp. 1250–1260, 2009. [16] T. Taner and J. Antony, “The assessment of quality in medical diagnostic tests: a comparison of ROC/Youden and Taguchi methods,” Int. J. Health Care Qual. Assur., vol. 13, no. 7, pp. 300–307, 2000.

[17] R. K. Pandey and S. S. Panda, “Evaluation of delamination in drilling of bone,” Med.

Eng. Phys., vol. 37, no. 7, pp. 657–664, 2015.

[18] M. Abagge, “Necrose térmica do osso produzida por perfuração com broca metálica,” Federal University of Paraná, Brazil, 1998.

[19] A. T. Eriksson RA, “Temperature threshold levels for heat induced bone tissue injury: a vital microscopic study in rabbit,” J. Prosthet. Dent., vol. 50, pp. 101–107, 1983. [20] M. Anderson and P. Whitcomb, “RSM Simplified, Optimizing processes using response

surface methods for design of experiments,” 2005.

[21] M. F. S. F. de Moura, A. B. de Morais, and A. G. de Magalhães, Materiais compósitos -

Materiais, fabrico e comportamento mecânico. Porto: PUBLINDÚSTRIA, EDIÇÕES

TÉCNICAS, 2005.

[22] B. D. Agarwal and L. J. Broutman, Analysis and performance of fiber composites, Second edi. John Wiley & Sons, inc, 1990.

[23] J.-M. Berthelot, Composite materials - Mechanical behavior and structural analysis. Springer, 1998.

[24] P. K. Mallick, Composites engineering hanbook. Marcel Dekker, inc., 1997.

[25] V. Shim, J. Boheme, C. Josten, and I. Anderson, “Chapter 9: Use of polyurethane foam in orthopaedic biomechanical experimentation and simulation,” Polyurethane, pp. 171– 200, 2012.

[26] S. F. F. Malak and I. A. Anderson, “Orthogonal cutting of polyurethane foam,” Int. J.

Mech. Sci., vol. 47, pp. 867–883, 2005.

[27] M.-C. e serviços de Saúde, [Online]. Available:

https://www.medipedia.pt/home/home.php?module=artigoEnc&id=365. [Accessed: 05- Oct-2017].

[28] “Sistema esquelético [Online]. Available:

https://www.auladeanatomia.com/novosite/sistemas/sistema-esqueletico/. [Accessed: 05-Oct-2017].

[29] P. E. V. dos Reis, “Furação de Materiais Compósitos de Matriz Polimérica,” Universidade de Aveiro, 2005.

[30] T. A. Teixeira, “Análise de tensões em materiais compósitos sob furação utilizando diferentes tamanhos de ferramentas de corte,” Instituto Politécnico de Bragança, Portugal, 2017.

43

1997.

[32] R. Edwards, Cutting Tools. The Institute of Materials, 1993.

[33] M. C. Shaw, Metal cutting principles. Oxford Science Publications, 1997.

[34] A. R. Watson, “Geometry of drill elements,” Int. J. Mach. Tools Manuf., vol. 25, no. 3, pp. 209–227, 1985.

[35] G. Boothroyd and W. A. Knight, Fundamental of machining and machine tools. Marcel Dekker, 1989.

[36] S. Ema, H. Fujii, E. Marui, and S. Kato, “New type drill with 3 major cutting edges,”

Int. J. Mach. Tools Manuf., vol. 28, no. 4, pp. 461–473, 1988.

[37] M. P. Groover, Fundamentals of modern manufacturing - Materials, process and

systems. Prentice-Hall International Editions, 1996.

[38] W. H. Yang and Y. S. Tarng, “Design optimization of cutting parameters for turning operations based on the Taguchi method,” J. Mater. Process. Technol., vol. 84, no. 1–3, pp. 122–129, 1998.

[39] Y. Wu and A. Wu, Taguchi methods for robust design. New York: ASME Press, 2000. [40] N. F. Moita, “Implementação do método Taguchi e análise de experiências na fase de

testes de moldes para injecção de plásticos,” Universidade Técnica de Lisboa, 2007. [41] D. Montgomery, Design and analysis of experiments. New York: Wiley, 1997.

[42] A. C. Lopes, M. G. A. Fernandes, J. E. Ribeiro, and E. M. M. Fonseca, “Determination of optimal parameters in drilling composite materials to minimize the machining temperature using the Taguchi method,” IV Int. Conf. Biodental Eng. Vila Nov.

Famalicão, 2016.

[43] G. Taguchi and S. Konishi, “Taguchi Methods Orthogonal arrays and linear graphs.” American Supplier Institute, inc, 1987.

[44] M. G. A. Fernandes, M. Vaz, R. M. J. Natal, and E. M. M. Fonseca, “Avaliação térmica da furação no osso cortical com e sem irrigação,” Rev. da Assoc. Port. Análise Exp.

Tensões, vol. 24, pp. 71–77, 2015.

[45] B. P. H. Tools, 2015. [Online]. Available: http://www.beta- tools.com/catalog/articles/view/410/__lang_en/__catlang_en/__catalog_bet.

[46] Extech, [Online]. Available: www.extech.com/display/?id=14726. [Accessed: 07-Oct- 2017].

[47] D. Vashishth and K. Tanner, “Bonfield W. Contribution, development and morphology of microcracking in cortical bone during crack propagation,” J. Biomech., vol. 33, pp. 1169–1174, 2000.

[48] A. Yuehuei and D. Robert, Mechanical testing of bone and the bone implant interface. New York: C. Press, 2000.

[49] A. C. Lopes, J. E. Ribeiro, M. G. A. Fernandes, and E. M. M. Fonseca, “Determinação dos parâmetros ótimos na furação do tecido ósseo com recurso ao método de Taguchi,”

44

[50] M. G. Fernandes, E. M. M. Fonseca, R. Natal, A. C. Lopes, and J. P. Ribeiro, “Experimental study of temperatures during drilling of ex-vivo bovine bones,” 10o Congr. Nac. Mecânica Exp. - CNME2016, 2016.

45