• Nenhum resultado encontrado

5. CONSIDERAÇÕES FINAIS E PERSPECTIVAS FUTURAS

5.3. Trabalhos Futuros

Para o futuro, para além de uma investigação aprofundada do desempenho das misturas betuminosas temperadas a longo prazo, é imprescindível a quantificação dos benefícios obtidos com a sua aplicação, nomeadamente a nível da comparação entre estruturas contendo misturas betuminosas a quente, com e sem incorporação de material fresado, e de misturas betuminosas temperadas com incorporação de material fresado.

A nível nacional parece então impreterível que os Donos de Obra estimulem a utilização destas tecnologias, incentivando e premiando as empresas construtoras que o façam, devido aos benefícios ambientais daí provenientes.

Este trabalho deixa ainda em aberto a possibilidade da criação de uma especificação nacional para uma metodologia de formulação deste tipo de misturas, o que auxiliaria a sua implementação e divulgação no nosso país.

Cláudia Isabel Gonçalves Ferreira 113

REFERÊNCIAS BIBLIOGRÁFICAS

Chandra K.Akisetty,Soon-Jae Lee, Serji N.Amirkhenian (2007). “High temperature properties of rubberized binders containing warm asphalt additives”. Int. Journal of Construction and Building Materials.

Asphalt Institute (1997). Superpave Performance Graded Asphalt Binder Specification and Testing, Superpave Series No. 1 (SP-1), Lexington, Kentucky.

Astec – Astec Industrie Companie Products (2009)

http://www.astecinc.com/index.php?option=com_content&view=article&id=117&Itemid= 188>

APAO (2003). Warm Mix Asphalt Shows Promise for Cost Reduction, Environmental Benefit, Centerline. The Asphalt Pavement Association of Oregon, Salem.

Bilal,V.Grosshenny,H. Lecouls, C. Le Noan, J. Marcilloux, J. -F. Quero, F.Verhéeet al. (2008). “Caractéristiques environnementales des matériaux routiers”. Journées plénières routes du LCPC, Revue Générale des Routes nº 865.

Brosseaud, Y., Jacques, M.S. (2008). “Warm asphalt mixes: overview of this new technology in France”. Transport Research Arena Europe, Ljubljana.

Button, J.W., Estakhri, C., Wimsatt, A. (2007). A Synthesis of Warm-Mix Asphalt. Texas Transportation Institute and Federal Highway Administration. Report 0-5597-1. Texas. CECA (2008). Green Road Formulation - Warm Mix Asphalt - Cecabase RT. Arkema Group.

<http://www.cecachemicals.com/sites/ceca/en/business/bitumen_additives/warm_coated_ material/warm_coated_material.page> (Accessed on 4Nov08).

Chowdhury, A., Button, J.W. (2008). “A review of warm mix asphalt”. Texas A&M University System.

Corrigan, M. (2008). “Warm Mix Asphalt Technologies and Research”. FHWA. <http://www.fhwa.dot.gov/pavement/asphalt/wma.cfm> (Accessed on 10Nov08).

Croteau, P.J., Tessier, B. (2008). “WMA Paving Technology: A road Builder’s Prespective” Annual Conference of the Transportation Association of Canada.

D’Angelo, J., Harm, E., Bartoszek, J., Baumgardner, G., Corrigan, M., Cowsert, J., Harman, T., Jamshidi, M., Jones, W., Newcomb, D., Prowell, B., Sines, R. and Yeaton, B. (2008).

Warm-Mix Asphalt: European Practice. Federal Highway Administration, U.S. DoT, AASHTO, NCHRP, Report no. FHWA PL-08-007, Alexandria.

Dal Bosco, S.M., Jimenez, R.S., Carvalho, W.A. (2004). “Aplicação da Zeólite natural escolecita na remoção de metais pesados de efluentes industriais: competição entre os cátions e processo de dessorção”. Eclética Química, Vol. 29, nº 1.

EAPA (2007). “Environmental guidelines on best available techniques (BAT) for the production of asphalt paving mixes”.

EAPA (2009). “The use of warm mix asphalt – Position paper”.

B. Eckmann,D. Chabert, O. Moglia, S. Largeaud, P. Descroix, E. Chailleux, V. Mouillet, H. Soenen, A. Perez Lepe, S. Nigen-Chaidron, L. Champion-Lapalu. (2008). “Module complexe des liants bitumineux”. Revue Générale des Routes nº 866.

FHWA (2008). “Warm Mix Asphalt Technologies and Research”. Federal Highway Administration. U.S. DoT.

Fitts, G. (2008). Warm Mix Asphalt: Experience in Texas. 32nd Annual Asphalt Conference, Asphalt Institute.

J.-P. Marchand, S. Soliman, M.Von Devivere, A. Sauget, S. Harnischfeger, W. Barthel (2008). “Performances et évalution de l’impact environnemental des enrobés bitumineux tièdes à l´aspha-min®”. Revue Générale des Routes nº 866.

V. Gaudefroy, C. de la Roche,P. Monéron, R. Paranhos et al. (2008). “Systèmes de mesure d’emissions de fumes pour la characterisation environnementale d’enrobés bitumineux et bitumes en laboratoire”. Journées plénières routes du LCPC – Revue Générale des Routes nº 865.

Hurley, G.C., Prowell, B.D. (2005a). “Evaluation of Aspha-Min® Zeolite for use in Warm mix asphalt”. National Center for Asphalt Technology.

Hurley, G.C., Prowell, B.D. (2005b). “Evaluation of Evotherm® for use in Warm mix asphalt”. National Center for Asphalt Technology.

Hurley, G.C., Prowell, B.D. (2005c). “Evaluation of Sasobit® for use in Warm mix asphalt”. National Center for Asphalt Technology.

Hurley, G.C., Prowell, B.D. (2006). “Evaluation of Potential Processes for use in Warm Mix”. <http://www.warmmixasphalt.com> (Accessed on 10Jan09).

Referências Bibliográficas

Cláudia Isabel Gonçalves Ferreira 115

Hurley, G.C., Prowell, B.D. (2008). “Warm Mix Asphalt: Best Practices”. National Asphalt Pavement Association. 53rd Annual Meeting.

Jenkins, K.J. (2000). Mix Design Considerations for Cold and Half-Warm Bituminous Mixes with Emphasis on Foamed Bitumen. PhD Thesis, University of Stellenbosch, South Africa. Koenders, B., Stoker, D., Robertus, C., Larsen, O., Johansen, J. (2002). “WAM Foam®, Asphalt Production at Lower Operating Temperatures”. 9th International Conference on Asphalt Pavement, Copenhagen, Denmark.

Kristjánsdóttir, Ó., Muench, S.T., Michal, L., Blurke, G. (2007). “Assessing Potential for Warm-Mix Asphalt Technology Adoption”. Transportation Research Record, No. 2040. Transportation Research Board.

Larsen, O., Moen, O., Robertus, C., Koenders, B. (2004). “WAM Foam Asphalt Production at Lower Operating Temperatures as an Environmental Friendly Alternative to HMA”. Proceedings of the 3rd Eurasphalt and Eurobitume Conference, Book 1, Foundation Eurasphalt, Breukelen, The Neterhlands, pp 641-650.

LEA-CO (2008) http://www.lea-co.com/lea_co/rubrique.php?page=2&sous_rub=61&id=11 LCPC (2006). “Manuel LCPC d’aide à la formulation des enrobés à chaud”. Laboratoire

Central dés Ponts et Chaussées.

Maccarrone, S., Holleran, G., Ky, A. (1994). “Cold Asphalt Systems as an Alternative to Hot Mix”. 9th AAPA International Asphalt Conference.

Muthen, K.M. (1998). “Foamed asphalt mixes – mix design procedure”. CSIR. <http://asphalt.csir.co.za/foamedasph/foamasph.pdf> (Accessed on 23Jan09)

NCAT (2005). “NCAT Evaluates Warm Mix Asphalt”. Asphalt Technology News, Vol. 17, No. 2.

Nynas (2008). “Reduced temperature asphalts”. Nynas Bitumen Magazine: Performance, issue 1.

Nynas (2009). “Asfalto templado, semi-templado y frío: el caso a favor de la sostenibilidad”. Nynas Bitumen Magazine: Performance, issue 1.

Olard, F., Noan, C. (2008). “PIARC Prize for Sustainable development - Low Energy Asphalts”. Routes-Roads Nº336/337.

Park, J.H., Seo, K.K. (2003). “Approximate life cycle assessment of product concepts using multiple regression analysis and artificial neural networks”. KSME International Journal, Vol. 17, Nº 12, pp. 1969-1976.

Porter, M.E., Van der Linde, C. (1995). “Toward a New Conception of the Environment - Competitiveness Relationship”. Journal of Economic Perspectives, Vol. 9, No. 4, pp 97-118.

Prowell, B.D., Hurley, G.C. (2008). “National Asphalt Pavement Association Warm-Mix Asphalt: Contractors Experiences”. Quality Improvement Series 125.

Ripoll, J.O., Farré, C.M. (2007). “Reducción de las emisiones causadas põe la producción y puesta en obra de mezclas bituminosas en caliente”. Jornada técnica ASEFMA – Mezclas Bituminosas El Marcado CE y la normativa de reduccion de emisiones.

Ruhl, R., Liendemeier, B. (2006). “Progress Report 2006 - The German Bitumen Forum”. The Germany Bitumen Forum. Issue 2, Heurich Lanck GmbH, Germany.

Sasol (2004). “The Bitumen Additive for Highly Stable Easily Compactable Asphalts”. Sasobit® Product Information 124, Sasol Wax GmbH, Hamburg.

Sasol (2008). “Sasobit Technology”. Sasol Wax GmbH Company, Hamburg. <http://www.sasolwax.com/Sasobit_Technology.html> (Accessed on 4Nov08)

Shell Bitumes (2006). “Quand les bitumes Shell font campagne pour l’environnement”. Le liant, no. 38.

Vaitkus, A., Cygas, D., Laurinavicius, A., Perveneckas, Z. (2009a). “Analysis and evaluation of possibilities for the use of warm mix asphalt in Lithuania”. The Baltic Journal of road and bridge engineering, 4(2), pp. 80-86. (1)

Vaitkus, A., Vorobjovas, V., Ziliute, L. (2009b). “The Research on the use of warm mix asphalt for asphalt pavement structures”. International Baltic Road Conference. Riga, Lithuania.

Virta, R. (2008). Geotimes. Mineral Resource of the Month.

You, Z., Goh, S.W. “Laboratory Evaluation of Warm Mix Asphalt: A Preliminary Study”. International Journal of Pavement Research and Technology, Vol. 1, No. 1.

Documentos relacionados