Base stations are used to establish the wireless connection between DECT terminals and the Forum 500 / Forum 5000. See also DECT and Upn interface. You can view and print the call data stored in the Forum 500 / Forum 5000 in the Costs area of the web console. On the Forum 500 / Forum 5000 you can call up the call list via system telephones and use it to dial a telephone number.
CLID
CLIP
CLIR
CNIP
Provided your network provider provides the required information, system phones and ISDN phones display the amount charged for the last call after you hang up. Many functions can be set by entering a code number, usually with an asterisk (*) key and a hash key. This input method is primarily intended for analog terminals connected to your system, but can also be used with system telephones.
COLP
COLR
Control signals, service IDs, telephone numbers, charge data and the like are sent via the D channel. The "Data backup" menu in the configurator allows you to save all your Forum 500 / Forum 5000 settings in the form of a file and restore them at a later time. The Proximus center sends the date and time to your Forum 500 / Forum 5000 when outgoing calls are made.
DECT
DHCP
For example, if the IP address of the DNS name "host.domain.country" needs to be determined, the root DNS server for the DNS server responsible for "country" must first be queried. This information can, however, be used to query the DNS server responsible for. The DNS server responsible for the "domain" is the first to know the IP address for the "host".
DTMF
The conventional e-mail protocols on the Internet allow senders to attach any type of data (image files, program files, etc.) to an e-mail.
Mail, Sending/Receiving
Mail Notification
The country-specific emergency numbers can be dialed from any telephone in the system, regardless of the user's dialing access rights, provided that the system administrator has entered these numbers in a special list on the web console. You can update the system software for the Forum 500 / Forum 5000 via the Firmware menu entry in the Web Console's Configurator (you may need to make a backup copy of the current configuration data on your computer). It is integrated into the Forum 500 / Forum 5000 communication system and can be activated via license.
The Forum Auto Attendant program package enables users to create and manage information systems (voice portals and voice mail systems) that can handle calls fully or partially automatically. With the Forum 500 / Forum 5000 communications system, the integrated Forum Conference application enables users to organize audio conferences with up to 30 people. Internal users of the Forum 500 / Forum 5000 communications system, as well as external parties, can participate in a conference.
The Forum 500 / Forum 5000 software integrates "Forum Count", a connection data recording application that can be easily operated via the web console. With this function, you can use the phone functions and the phone book of the Forum 500 / Forum 5000 on the web console. In addition to GAP-compatible cordless telephones from other manufacturers can also be operated on base stations in the Forum 500 / Forum 5000.
Depending on the terminal, the hands-free mode is realized via a menu or by pressing a key.
HDLC
The first page of a website that you see on your web browser after entering the URL.
HTML
HTTP
ICMP
IMAP
The Internet Protocol is a standard protocol that defines how data packets must be formatted, addressed and transmitted over the Internet.
IPEI
IPX/SPX
ISDN
Both user channels can be used independently of each other for any ISDN service. ISDN terminals with enhanced features and user-controlled displays can be connected to internal S0 buses. Some European network providers require a keyboard protocol to set up features (not applicable to Germany).
System terminals and many standard terminals have a redial key that you can use to redial the last number dialed.
LDAP
An e-mail name, usually short and easy to remember, that can be used instead of your real e-mail name. This is useful, especially if your real email name is long and hard to remember or consists of a series of numbers.
MCID
This so-called "multi-company variant" can be implemented using Forum 500 / Forum 5000, for example, within a shared office. It is possible to configure Forum 500 / Forum 5000 for each company individually and determine to what extent the system features can be used. In Euro-ISDN, up to ten telephone numbers can be allocated for access.
Pressing this key disables all the phone's microphones (in the handset, and also in the device itself), so you can talk to your colleagues in the room without the party on the phone hearing you. The NAT of Forum 500 / Forum 5000 makes it possible to use private IP addresses in a LAN that are not valid on the Internet. When forwarding packets, NAT changes the IP addresses and port data in the IP data packets to publicly valid values.
In the network menu of the configurator, you can connect to the Internet provider and change the access settings for the Forum 500 / Forum 5000. This is the software component of the Windows operating system that the currently active computers in the LAN can use. be shown. The netmask serves to determine which IP addresses can be reached directly without making an intermediate landing.
This is an enhanced form of Windows networking where a dedicated server is used to manage a number of workstation computers from a central location.
NTBA
This device, housed in a small, box-shaped housing, converts a 2-wire circuit into an internal 4-wire circuit leading to the S0 interface.
PABX
PARK
It contains a central part that is accessible to all users, as well as personal entries for each user. If Forum 500 / Forum 5000 is shared by several companies, a company phone book can also be created for each company. The central phone book and the company phone book are configured via the web console configurator.
Personal entries can be set and accessed via the web console's phonebook, the Forum CTIor on system terminals. Users integrated into a pickup group can accept calls for other group members on their own phone (i.e. pickup).
PING
POP3
This protocol makes it possible to transfer the data of a number of network protocols (such as TCP/IP, IPX/SPX or NetBEUI) via serial circuits. The following diagram illustrates the correlation of the protocols and services mentioned in this glossary. With an ISDN card, you can set up a connection to the Forum 500 / Forum 5000 from an external computer via the telephone network.
Remote Programmed Call Forwarding enables authorized third parties to program or delete call forwarding for their Forum 500 / Forum 5000 terminal from a remote source. Using a service computer, you can configure the Forum 500 / Forum 5000 with remote maintenance via the external S0 bus. If remote maintenance is not performed or transmission is complete, the Forum 500 / Forum 5000 will automatically return to normal mode.
The "Remote switching" function makes it possible to specify the functional status of the Forum 500 / Forum 5000 communication system via external devices (e.g. light switches, alarm lamps). For outgoing calls, you can selectively limit the transmission of your phone number to the display of the number you wish to call. This is a standardized ISDN interface at the network termination of an ISDN primary multiplex access.
Internal parties can accept (record) a call to any other phone by entering the phone number of the party whose call you want to accept.
SMTP
In the Phonebook section of the web console, you can assign speed dial numbers to up to either 100 or 1000 entries in the central phonebook. On system telephones, you can select the speed dial destinations from the central directory by following the instructions in the menu. With standard terminals (eg standard analogue telephones, ISDN telephones, cordless GAP telephones) many of the functions of the Forum 500 / Forum 5000 can only be used using a code number procedure (or not at all).
You can install an updated version of the Forum 500 / Forum 5000 system software via the SW Update menu of the configurator. Forum 500 / Forum 5000 is configured from a computer with the help of a web browser through which the system's web console can be called. The System Information menu of the configurator contains information about the Forum 500 / Forum 5000 software version level and a summary of the configured internal telephone numbers.
The system PIN code ensures that only authorized persons can configure and perform maintenance work on the Forum 500 / Forum 5000. Some functions can only be used if the system PIN code is set to a number other than "0000". Small icons for running programs appear on the right side in the status area of the Windows taskbar (Systray).
The Systray program of the Forum 500 / Forum 5000 makes it possible to display the current status for ISP, RAS and LAN-LAN connections.
TAMI
This phone setting is located under the "Charge Settings" menu item on the "Phone Settings" MenuCard.
TAPI
TCP/IP
See also CLID, CLIP, COLP, Telephony and Limiting the display of your phone number. In the Configurator's Telephony menu, you can, among other things, configure the telephony characteristics of your Forum 500 / Forum 5000: accesses and call distribution. You can transfer internal or external calls from both standard and system terminals to another internal subscriber.
Through this phone number, you can make internal and external connections and change the program by another team member through this key, in which case calls for you are signaled to the other team member's terminal. This is the manufacturer's two-wire interface between the Forum 500 / Forum 5000 and the system terminal. You can also enter the email address, phone numbers, group assignment and, if applicable, RAS access to access the Forum 500 / Forum 5000 from an external phone.
You can prevent other users from performing passcode procedures that involve a PIN by changing the preset PIN when you set up your phone. With a null-modem cable, you can connect a workstation computer to the Forum 500 / Forum 5000 serial interface and perform initial configuration or use external programs. For information on the Forum 500/Forum 5000 software version, serial number, and hardware addresses, see the Versions menu in the Web Console Configurator.
On system phones, you can change the handset and speaker volume setting.
WINS
It is used to make network drives and network printers available from a server or workstation computer.
Notes
Support
