Catalogue of Replacement Parts

(1)

Catalogue of Replacement Parts

U&wc

IDEAL CLICKING MACHINE MODEL C

(SYMBOL ICM)

UNITED SHOE MACHINERY CORPORATION

CUTTING DIK I>LPARTtvlENT

140 Federal Street

Boston, Mass., U.S.A.

AUGUST t»Bl PRINTED IN U

(2)

IDEAL CLICKING MACHINE - MODEL C (SYMBOL ICM)

Printed in U.S.A.

(3)

(4)

IDEAL CLICKING MACHINE - MODEL C

(SYMBOL (CM)

CLASSIFHD INDEX OF MECHANISMS MECHANISM

BEAM BUMPER PLUNGER PARTS BEAM SPINDLE PARTS

BRAKE PARTS

CLICKING BLOCK APRON PARTS

CLOTH CARRIAGE (FOR WIDE MATERIAL}

CLOTH HOLDING DEVICE CLUTCH MECHANISM COLLECTIVE NUMBERS DRIVING SHAFT PARTS

IMPACT MOUNT PARTS INDIVIDUAL MOTOR DRIVE INTERMEDIATE LEVER AND

TRIP LEVER PARTS LUBRICATION

MAIN PARTS MISCELLANEOUS SAFETY DEVICE

PAGE PLATE

15

13.1^.15 17.18,19 26,27

26

1

3.^.5 33.3^

2^1,25,26

n

5

6

31.32,33 -5.6

29,30 11

16,17 8

TO I17

15.16 3

20,21 2

35 TO 4^1 7,8

12

1 10 10

USMC ^-A- ^CM

(5)

(SYMBOL ICM)

CLASSIFIED INDEX OF MECHANISMS - CONT'D.

MECHANISM PAGE PLATE

SMALL SIZE USMC WOOD BLOCK

CENTRAL CLAMPING PARTS 5,6 2

SMALL SIZE USMC WOOD BLOCK

SIDE CLAMPING PARTS 6

SIDE TABLE PARTS 28,29

SPECIAL INSTRUCTIONS FOR

ORDERING PARTS 2

STARTING MECHANISM 22,23,2^1 9

SWINGING BEAM CLAMP PARTS

(FOR BEAMS NOS, IO77A,

1096+. AND 1167) 13 k

(FOR BEAMS NOS. I365+,

I371+. 137^ and 1405+) 12,13 ^

SWINGING BEAM PARTS 7 to 12 inc. 3

table of DIAMETERS OF

PULLEYS FOR DRIVING MACHINE 1

WOODEN SHELF PARTS (USED

WITH SMALL SIZE BLOCK) 27,20 8

USMC -B- ICM

(6)

(SYMBOL ICM)

The IDEAL CLICKING MACHINE - MODEL C is

FITTED WITH A 16" CLUTCH PULLEY. ThIS PULLEY SHOULD BE SPEEDED ^25 REVOLUTIONS PER MINUTE,

TABLE OF DIAMETERS OF PULLEYS FOR DRIVING MACHINE Revolutions of

Main Shaft 275 300 325 350 375 koo 425

Diameter of Pulley

TO BE put on Main Shaft

25" 23" 21" 19" 18" 17" ^16"

4" Flat belting required.

LUBRICATION

Careful attention should be given to the

PROPER lubrication OF THIS MACHINE.

We recommend the following:

Use USMC 3^0^ oil for bearings.

Use USMC 200AL semi-fluid grease for gears.

Use USMC I5OA oil for sleeve bearing motors AND USMC 3OOSL30 grease for ball bearing motors.

For Commercial equivalents refer to USMC Lubrication Standards.

USMC -1- ICM

(7)

READ THESE SPECIAL INSTRUCTIONS BEFORE ORDERING PARTS

All letters that appear in connection with A NUMBER IN THIS CATALOG, WHETHER BEFORE OR AFTER IT, SHOULD ALWAYS BE GIVEN IN ORDERING PARTS, AS

"NL-89K" AND NOT "89K" OR "89", AND "NLN-48" AND

NOT "W.

As IT IS NOT PRACTICABLE, OWING TO THE SMALL SIZE OF SOME OF THE PARTS, TO MARK THE INITIAL LETTERS ON THEM, IT IS BEST TO ALWAYS CONSULT

YOUR catalog and OBTAIN THE FULL NUMBER BEFORE ORDERING DUPLICATE PARTS THE NUMBER MARKED UPON THE BROKEN PART SERVING TO IDENTIFY IT IN

THE CATALOG. CoiL SPRINGS HAVE NO NUMBERS stamped on THEM,

In ORDERING PARTS CATALOGED WITHOUT INITIAL LETTERS BEFORE THE NUMBER, ALWAYS PREFIX THE

SYMBOL OF THIS MACHINE.

In ORDERING BY MAIL, IT IS BEST TO GIVE THE NAME OF THE PART, AS GIVEN IN THIS CATALOG, AS WELL AS THE WHOLE NUMBER, BUT IF ORDERING BY telegram, THE NAME OF THE PART MAY BE OMITTED EXCEPT WHEN IT CAN BE GIVEN WITHOUT EXTRA CHARGE.

SPECIAL INFORMATION

Note quantity of parts used is one (1)

UNLESS OTHERWISE NOTED BY THE NUMBER IN PARENTHESIS AFTER THE NAME OF PART.

^ Not REGULAR EQUIPMENT.

USMC -2- [CM

(8)

(SYMBOL ICM]

CLASSIFIED LIST OF PARTS

MAIN PARTS PLATE

§ 1^39+ frame - ASSEMBLED WITH 1-11+40, 2-PL-12I+3P, 1+-SL-21H21, 2-USF-I33, 1-1128, 1-EC-R2034,

1-1127

II+I+O CAP, FRAME SPINDLE 1 PL-I243P PIN, SPINDLE CAP (2)

SL-21H21 SCREW, spindle cap (hex, SOCK. HD. CAP 1/2"-13NC

X 1-3/1+") (1+)

USF-I33 TUBE, DRIVING SHAFT OIL (2) 1 1128 BUSHING, DRIVING SHAFT

(rear) 1

EC-R203I+ PLUG, PIPE (1/2")

1127 BUSHING, DRIVING SHAFT

(front) 1

PLU-592-3/8" CUP, DRIVING SHAFT 01L

(3/8" PRESS FIT, HINGE cover) (2)

III+3A FRAME - COMPLETE, viz:

1-1^39+/ 2-PLU-592-3/8"

1+08 LEG, FRAME (2) sl-8i62v bolt, frame BINDING

(short) (2)

# Not furnished separate.

USMC -3- ICM

(9)

MAIN PARTS - CONT'D. PLATE

SL-8i61V bolt, frame binding (long] (2)

NL-29M2 NUT, binding bolt

(5/8"-11nc, 39M"

thick) (4)

WL-^12T WASHER, bolt locking {k]

409 ROD, FRAME TIE 1

1|71 SLEEVE, TIE ROD (2} 1 NL-688K NUT, TIE ROD (i|)

1147 TABLE (regular) (36" X I8")

✩ ll48 TABLE (40" X 18"

✩ 1149 table (4o" X 20")

✩ 1150 TABLE (20-1/2" X 20-1/2")

(for small size cutting block)

1294 BOLT, TABLE binding (end

AND center) (6) 1

NL-3IM3 NUT, table binding bolt

(3A"-1onc, 47/64"

thick) (6)

WL-5I3T WASHER, bolt locking (6)

FL-453M FELT, DRIVING shaft BUSHINQ 01L (front) FL-454m FELT, DRIVING shaft

BUSH]NG 01L (rear)

t 869 SHIM, table 1

☆0 1145 TABLE

■A0 ll46 CLAMP, block (rear) (2) 1

■A0 SL-5407V SCREW, block clamp (for 5"

cutting block) (2)

t To BE USED BETWEEN TABLE AND FRAME

to SHIM UP TO THE DESIRED ANGLE ON OUTSTANDING MACHINE,

0 Fittings for narrow clicking

BLOCKS.

USMC -4- ICM

(10)

MAIN PARTS - CONT^D. PLATE

☆0 SL-2169V screw, block clamp (for 2" CUTTING block] (2)

✩ BLOCK, USMC WOOD (20" X 20" X 5"] (for central

AND SJ DE CLAMPlNG

MECHANISm]

BLOCK, USMC WOOD (36" X 18" X 5")

1218 BOLT, BLOCK CLAMPING (^1 1

WL-281T WASHER, clamping bolt (4)

NL-29M2 NUT, clamping bolt

(5/8"-nNC, 39/6it"

thick) (4]

■A0 682A CLAMP, WOOD block (2) [00] 1

i^91 TROUGH, (regular) 1

✩ 855 TROUGH (40"] 1

✩ 1095 TROUGH (for small USMC

WOOD block) 1

493 CLAMP, trough (2) 1

SL-2836V BOLT and nut, clamp (2) WL-373T WASHER, clamp bolt (2)

SMALL SIZE USMC WOOD BLOCK CENTRAL CLAMPING PARTS ✩

1086 BAR, USMC WOOD block

CLAMPING 2

NL-336IK NUT, CLAMPING BAR (2)

1087 LEVER, CLAMPING 2

108o PIN, lever FULCRUM 2 PL-2H3P PIN, FULCRUM PIN COTTER

(3/32" X 3A"1 (2)

ULP-75 LINK, LEVER (2) 2

0 Fittings for narrow clicking

blocks,

00 Quantity, ^ used when block is

fitted with COMMON IRONS,

USMC -5- ICM

(11)

SMALL S^ZE USMC WOOD BLOCK

CENTRAL CLAMPLNG PARTS - CONT'D, PLATE

PL-4672P P!N, LEVER LINK FULCRUM (2}

PL-lOifTP PIN, FULCRUM PIN COTTER

(5M" X 5/8") (2)

1089 TRUNNION, LEVER LINK 2 SPGL-1211S SPRING, trunnion (tension

7/16" X 2-5/8") (2)

NL-6I|^0K NUT, TRUNNION adjusting (2}

WL-5699T WASHER, TRUNN I on ADJUST!NG

small SIZE USMC WOOD BLOCK SIDE CLAMPING PARTS »

1090 BOLT, BLOCK CLAMPING SPGL-2539S SPRING, CLAMPING BOLT

(compression 15/16" X

1-5/8"]

1091 SLEEVE, CLAMPING BOLT 1092 HOLDER, sleeve

PL-847P PIN, SLEEVE holder

PL-1246P PIN, sleeve holder fulcrum PL-2I13P PINi FULCRUM PIN COTTER

(3/32" X 3/V')

1093 LEVER, clamping bolt PL-I997P LEVER fulcrum

PL-243P PIN, FULCRUM PIN COTTER

(3/32" X 3/1+"} (2)

IO9I1 BRACKET, LEVER

SL-I522V SCREW, BRACKET BINDING (2)

* 1102 CLAMP, SIDE - COMPLETE, viz: 1-1090, I-SPGL-2539S1 1-1091, 1-1092, 1-PL-847P, 1-PL-1246P, 1-PL-2^3P,

1-1093. 1-PL-1997P, 2-PL-243P, 1-1094,

2-SL-1522V [^}

USMC -6- iCM

(12)

SWINGING BEAM FARTS PLATE

# 1365+ BEAM, SWINGING {13" X 28-5/8"] - ASSEMBLED WITH 2-1366, 2-1367,

2-1060

1366 INSERT, BEAM CLAMP STUD (2]

1367 INSERT, BEAM CLAMP CAP SCREW (2) 1060 BUSHING, BEAM (2)

I368A FACE, STRIKING

(metallic]

II69A SCREW, STRIKING FACE (short) (10)

■ 1369 SCREW, STRIKING FACE (long) (used in four

INSIDE holes) {k) WL-26i|T WASHER, screw (14)

NL-1007K NUT, SCREW (ll|]

1373A FACE, striking -

COMPLETE, viz:

1-1368A, 10-1169A, 1^-1369, lil-WL-261+T,

III-NL-IOO7K

113^ PLATE, CAUTION

PL-I72IP PIN, CAUTION PLATE [^]

PL-37I2P SPINDLE, starting

HANDLE

I37OA BEAM [with CAUTION PLATE,

FITTED WITH METALLIC

STRIKING face) (rEGULAr) COMPLETE, viz: 1-1365+.

1-1373A, 1-1134,

i|-PL-172lP, 1-PL-3712P .

ft

tt Use WITH machine for shoe

trade only.

USMC -7- ^CM

(13)

SWINGING BEAM PARTS - CONT*D. ^PLATE

# 1167

1168 II69A

WL-26IIT NL-75K NL-1007K 129<

113^

PL-1721P PL-3712P

« II7OA

# 1371+

1366 1367

BEAM, SWINGING (13"

X 28-5/8")

FACE, STRIKING

(metallic)

SCREW, STRIKING

FACE (12)

WASHER, SCREW (12) NUT, SCREW (use at

LEFT HAND REAR HOLe) NUT, SCREW (11)

FACE, STR i KING -

COMPLETE, viz: 1-1168, I2-II69A, 12-WL-26ifT,

I-NL-75K, II-NL-IOO7K PLATE, CAUTION

PIN, CAUTION PLATE (4)

SPINDLE, STARTING HANDLE BEAM(with caution plate,

STRIKING face) (rEGULAr) COMPLETE, viz: 1-1167, 1-1296, 1-113^^,

4-PL-I72IP, 1-PL-2712P . BEAM, SWINGING (13" X

3I-I/S") - ASSEMBLED WITH 2-1366, 2-1367,

2-1060

INSERT, BEAM CLAMP

STUD (2)

INSERT, BEAM clamp CAP SCREW (2)

m

✩

tt

•f-f- Use WITH machine for shoe

trade only.

00 Use with machine for industrial

TRADE ONLY.

USMC -8- ICM

(14)

SWINGING BEAM PARTS - CONT'D. ^PLATE

1060 BUSHING, BEAM (2) I372A FACE, STRIKING

(metallic]

n69A SCREW, STRIKING FACE (short) (lo)

1369 SCREW, STRIKING FACE (long) (used IN FOUR

INSIDE holes) (4) WL-261^T WASHER, striking face

c D rw r 1 it I

NL-I007K NUT, screw (14) 1374a FACE, STRIKING -

complete, viz: I-I372A,

10-1169A. 4-1369,

14-WL-264T, 14-NL-1007K 1134 PLATE, CAUTION

PL-1721P PIN, CAUTION PLATE (4)

PL-3712P SPINDLE, STARTING

HANDLE

✩ I375A BEAM {with caution plate,

STRIKING face) - COMPLETE,

viz: I-I37I+. 1-137^A, 1-1134, 4-PL-1721P,

1-PL-3712P

# IO77A BEAM, SWINGING (13" X

31-1/8")

1220 FACE, STRIKING

(metallic)

ll^A SCREW, STRIKING face (13)

WL-264T WASHER, screw (I3) NL-I007K NUT, SCREW (13)

ft

✩

00

✩

# Not FURNISHED SEPARATE, tf Use WITH MACHINE FOR SHOE

TRADE ONLY.

TRADE only.

USMC -9- ^CM

(15)

SWINGING BEAM PARTS - CONT'D. ^PLATE 1300

1134 PL-1721P PL-37I2P

^ 3171A

# 1376+

1366

1367

1060 1377A II69A 1369 WL-264T NL-IOO7K I37OA

FACE, STRIKlNG -

COMPLETE, viz:

1-1220, I3-II69A,

l3-WL-26i|T, I3-NL-IOO7K

PLATE, CAUTION

PIN, CAUTION PLATE (^)

SPINDLE, STARTING

HANDLE

BEAM (with caution plate,

STRIK1NG face] -

COMPLETE, viz; 1-1077^#

1-1300, 1-113^+,

it-PL-172lP, I-PL-37I2P BEAM, SWINGING {18' X

3I-I/8") - assembled WITH 2-1366, 2-1367^

2-1060

INSERT, BEAM CLAMP

STUD (2]

INSERT, CAP screw (2) BUSHING, BEAM (2)

FACE, STRIKING

(metallIc)

SCREW, STRIKING FACE

(short) (18)

SCREW, STRIKING FACE

(long) (used in four INSIDE holes) [k]

WASHER, SCREW (22) NUT, SCREW (22) FACE, STRIKING -

COMPLETE, viz: 1-1377^^

I8-II69A, if-1369,

22-WL-264T, 22-NL-IOO7K

00

✩

3 . 3

^ 3

§ Not furnished separate.

trade only.

USMC -10- CM

(16)

SWINGING BEAM PARTS - CONT'D. PLATE

113^ PLATE, CAUT ) ON

PL-I72IP PIN, CAUTION PLATE (^)

PL-37I2P SPINDLE, STARTING

HANDLE

✩ I379A BEAM [with caution plate,

STRIKINQ face} -

COMPLETE, viz: 1-137^' I.I378A, 1-1134,

4-PL-I72IP, 1-PL-3712P

# 1405+ beam, swinging [24" X 31-1/8") - assembled with 2-1366, 2-1367, 2-1060 1366 INSERT, BEAM clamp

STUD [2] 3

1367 INSERT, CAP SCREW [2] 3

lo6o BUSHING, BEAM [2] 3

14o6a face, striking [metallic]

n69A SCREW, striking face [short] [18]

1369 SCREW, striking face [long] [use IN four

INSIDE holes) [4) WL-264t WASHER, striking face

SCREW [22]

NL-I007K NUT, SCREW [2) 1407A face, striking -

COMPLETE, viz: 1-14o6a, 18-1169A, 4-1369,

22-WL-264t, 2-NL-IOO7K,

1134 PLATE, CAUTION

PL-I72IP PIN, CAUTION PLATE (4)

PL-37I2P SPINDLE, STARTING HANDLE

USMC -11- ICM

(17)

SWINGING BEAM PARTS - CONT*D. ^PLATE

✩ llfOSA

# 109^

io6o PL-1721P PL-37I2P

✩ 3170

BEAM (with caution

PLATE, FlTTED WITH METALLIC STRIKING

face) - COMPLETE,

Viz: 1-1^05+, I-I407A, 1-11311, 4-PL-1721P,

1_PL-3712P

BEAM (9 WIDE, FOR SMALL CUTTING BLOCk) -

ASSEMBLED WITH 2-1060 BUSHING, BEAM (2)

PLATE, caution

PIN, CAUTION PLATE [k]

SPINDLE, STARTING

HANDLE

BEAM (with caution plate) - COMPLETE, viz: 1-1096+, 1-113!^, lf_PL-172lP, I-PL-37I2P

00

✩

(FOR BEAMS NOS. I365+, I37I+,

I376f AND 1405+)

1391 1392 WL-1534T

1393

SL-16SIO

1381 SL-8167V

CAP, BEAM (lower) STUD, LOWER CAP (2]

WASHER, STUD (2) NUT, STUD (2)

WRENCH, STUD NUT (see WRHL-527H)

SCREW, STUD NUT (hex.

SOCK. SET 3/8"-24NF

X 3/8") (a)

CAP, BEAM (upper) SCREW, UPPER CAP (2)

# Not FURNISHED SEPARATE.

00 Use with machine for shoe trade only.

USMC -12- _CM

(18)

(FOR BEAMS NOS. I365+, 1371+,

1376+ AND 1405+) - CONT*D. PLATE WL-513T WASHER, screw (2)

1214 BUSHING, starting handle

(for repairs) (13/1^" long

X 1/2" l.D. X .751" G.D.)

(FOR BEAMS NOS. 1077A, 1096+ AND 1167) ✩

901 CAP, BEAM h

902 BOLT, LOWER U 4

NL-764K NUT, BOLT (2)

SL-3i|06V SCREW, NUT BINDING (2) WL-1214t washer, U bolt (2)

903 BOLT, UPPER U k

NL-TO4K NUT, BOLT (2) WL-28ST washer, bolt (2)

1214 BUSHING, starting handle

(for repairs) (13/18" LONG X 1/2" l.D. X .751" O.D.)

SL-5659V SCREW, beam set (for

REPAIRs)

beam SPINDLE PARTS

l4i|9 SPINDLE, beam 5

ICD-III RING, BEAM 5

HANDLE, STARTING

(see No, ^189]

2013 SCREW, SWINGING BEAM

ADJUSTING 5

2018 BEARING, ADJUSTING SCREW

BALL 5

GR-268 BALL, BEARING (1/2" CHROME steel) (9)

WL-IOI5T WASHER, BEARING THRUST (2)

USMC -13- I CM

(19)

BEAM SPINDLE PARTS - CONT'D. PLATE 2022 RING, BEARING RETAINING 5

1^5^ rod, swinging beam

ADJUSTING SCREW

CONNECTION - ASSEMBLED

WITH 1-1^51 5

1^51 BUSHING, ROD 5

930A WHEEL, HAND 5

1053+ PIN, HAND WHEEL LOCKING -

ASSEMBLED WITH 1-PL-1836P 5 PL-I836P PIN, LOCKlNG PIN TURNING

PL-IOStP pin, LOCKING PIN COTTER C5/6't" X 5/8")

WL-703T WASHER, LOCKING PIN

SPGL-935s spring, locking pin

(compression s/8" X 2-3/V')

1055 WHEEL, HAND - complete, viz: I-93OA, 1-1053+,

l-PL-loIfyP, i-wl-yQt, I-SPGL-93I+S

3012A DRUM, SPINDLE 5

1139 ARROW, BEAM direction 5 PL-I72IP PIN, arrow (2)

1280 STUD, spindle drum 5

1293 DEVICE, HAND wheel and

HAND WHEEL LOCKING -

COMPLETE, viz: 1-1055#

1-3012A, 1-1139, 2-PL-I72IP, 1-1280 10511 GUARD, HAND WHEEL

✩ SL-3430V SCREW, GUARD

201 KEY, HAND WHEEL 5

NUT, RELEASING - ASSEMBLED

W| TH 2-lifii7, 2-14I18 5 llflf? SCREW, NUT CLAMP (2} 5 l4i|8 WASHER, CLAMP SCREW (2) 5

WRENCH, RELEASING NUT

CAP SCREW (see WRHL-339H)

USMC -14- ICM

(20)

BEAM SPINDLE PARTS - CONT'D. PLATE

SL-62O7V SCREW, RELEASING NUT

ADJUST)NG

NL-56OK NUT, RELEASING NUT

ADJUST)NG

2029 BRACKET, RELEASING NUT

ADJUST ING SCREW 5

SL-3099V SCREW, BRACKET (2) WL-706T WASHER, BRACKET (2)

# 1129 LINK, CONNECTING ROD FL-I155M FELT, LINK OIL

1130 LINK, CONNECTING ROD - COMPLETE, viz: 1-1129#

1-FL-1^55M 5

1336 PIN, CONNECTING ROD LINK 5 I453A SPRING, LINK PIN (2) 5

BEAM BUMPER PLUNGER PARTS

904 PLUNGER, BEAM BUMPER (2] 11

PL-5032P PIN, PLUNGER COTTER

(1/8" X 7/8") C2)

1223 PIN, PLUNGER TIE 11 SPGL-243S SPRING, PLUNGER (compression

27/32" X 3-1/2") (2)

WL-I285T WASHER, PLUNGER (2)

DRIVING SHAFT PARTS

1^57 SHAFT, DRIVING (V^"

throw) (regular) 3

✩ Iif58 SHAFT, DRIVING (1/2"

THROW, LIGHT WORk) 3

USMC -15- ICM

(21)

DRIVING SHAFT PARTS - CONT*D. ^PLATE

✩

1^56

llt59 li^60 U6l 1^162

1^63

SL-23SI7

\h9\

1^65

753A 139^-

PL-2599P

1454a

1398A

1399 1400+

1401 1402 SPGL-2705

sl-i4s6

758 SPGL-1579S

shaft, driving (1" THROW,

HEAVY work] 3

PULLEY, DRIVING 3

BEARING, ROLLER [HyATT

#CW-208) (2)

SPACER, BEARING 3

PLATE, BEARING END (2) 3

COLLAR, BEARING SHAFT 3 SCREW, COLLAR (hex. sock.

SET 5/8"-nNC X 5/8"] iz]

SCREW, COLLAR ADJUSTING 3 CUP, BEARING GREASE

(Lunkenheimer #1 Tiger i/V'-i8npt]

CLUTCH MECHANISM

RING, EXPANDING (nut HALf] 8

RING, EXPANDING - ASSEMBLED WITH I-PL-2599P

(expanding screw half] 8

PIN, ring dowel

SCREW AND LEVER, expanding 8 ADJUSTER, expanding screw 8 SCREW AND GEAR, adjusting 8

WORM, adjuster - assembled

WITH 1-l4ol 8

GUIDE, SCREW DRIVER 8 PIN, WORM FRICTION SPRING 8

SPRING, WORM FRICTION

(compression 11/64" X 3/4")

SCREW, spring retaining

(hex. sock, set 5/16"-24nF

X lA")

NUT, EXPANDING SCREW 8 SPRING, EXPANDING RING

(compression 17/32" X

1-3/4"]

USMC -16- ICM

(22)

>b.

-.1

CLUTCH mechanism - CONT«D.

1403 RING, EXPANDING -

COMPLETE, viz: 1-753^*

1-139^.

1-1398A, 1-1399.

1-1400+, 1-1402,

1-SPGL-270S, 1-SL-11|S6,

1-758, I-SPGL-I579S

14o6 bolt, clutch operating 8 SPGL-3295S SPRING, CLUTCH OPERATING

BOLT (compression 19/32';-^

X 2-19/32")

1487 PLATE, spring 8

SL-32IV SCREW, PLATE BINDING (2)

ICD-59 CAM, clutch bolt operating 8

SL-158oV SCREW, operating cam

BINDING (2)

WL-5IOT LXKWASHER, screw {3/8"

positive lock) (2)

9^1 LEVER, BOLT RELEASING 8 FL-^M FELT, lever oil

995 WEDGE, LEVER 8

SL-575IV SCREW, WEDGE BINDING (2) WL-508T LOCKWASHER, bind.ing screw

[l/4" POSITIVE lock) (2) SHAFT, LEVER (see No. 504)

LEVER, RELEASING LEVER

OPERATING (see No. 5OI )

BRAKE PARTS

1404 DRUM, BRAKE 4

SL-I663V SCREW, DRUM SET

NL-359K CHECKNUT, set screw

499A KEY, BRAKE DRUM 4

SL-14s12 SCREW, key (hex. sock, set

5/i6"-24nf X 7/16")

1351 STRAP, BRAKE - ASSEMBLED WITH I-I352+, 1-3168,

6-PL-5537P, 2-PL-2530P 4

USMC -17- I CM

(23)

BRAKE PARTS - CONT'D, PLATE

# 1352+ BAND, BRAKE STRAP - ASSEMBLED WITH 2-1353

# 1353 END, BRAKE STRAP BAND (2)

3160 LINING, BRAKE STRAP ^

PL-5537P RIVET, LINING (brass,

SPLIT, RO. HD. 5/32"

dia. 7/16" long) (6) PL-253OP RIVET, LINING (c'SUNK HEAD ,165" DIA., 1/2"

long] (2J

135^1 EXTENSION, BRAKE STRAP 4

1355 BOLT, EXTENSION (2) ^ WL-I3&T LOCKWASHER, extension

BOLT (2)

NL-120K NUT, extension bolt [k]

PL-5^152P PIN, extension bolt [2]

PL-I837P PIN, extension bolt pin

COTTER (1/16" X 3/S") (2)

9II3 BRACKET, BRAKE STRAP

EXTENSION ^

SL-if858V SCREW, BRACKET LOCATING NL-67K NUT, BRACKET LOCATING

SCREW

SL-I45OV SCREW, BRACKET BINDING NL-67K NUT, BINDING SCREW

3075 SCREW, EXTENSION

ADJUSTING h

SL-73V SCREW, ADJUSTING SCREW SET

PL-2624P PLUG, SCREW FRICTION

WRENCH, EXTENSION ADJUSTING SCREW (sEE WRHL-I53H}

1356 LINK, BRAKE STRAP

WL-5H9T WASHER, LINK CONNECTING

P I N

PL-243P PIN, LINK CONNECTING PIN COTTER (3/32" X 3A")

USMC -18- I CM

(24)

BRAKE PARTS - CONT'D. PLATE

9it4A+ LEVER, BRAKE - ASSEMBLED WITH l-SDL-lOi[5Y,

1-NL-19K, I-PL-Io^yp k SDL-10^5Y STUD, brake lever

CONNECTlON

NL-19K NUT, CONNECTION STUD PL-lO^yP CONNECTION STUD

COTTER X 5/8")

PL-2784P PIN, BRAKE LEVER FULCRUM

PL-268P PIN, FULCRUM PIN COTTER (1/8" X 1") (2)

SL-599i^V SCREW, BRAKE LE VER LOCATING NL-67K NUT, LOCATING SCREW

9^5 BLOCK, BRAKE LEVER CATCH k SL-563OV SCREW, CATCH BLOCK

956a plate, BRAKE LEVER STOP 5

SL-3787V SCREW, STOP PLATE ADJUSTING

nl-3s5k nut, ADJUSTING SCREW (2)

947 arm, BRAKE LEVER RELEASE k ICD-457 STUD, RELEASE ARM CONNECTION k

CL-356J COLLAR, CONNECTION STUD PL-I75P PIN, STUD COLLAR COTTER

(1/8" X l-l/V)

FL-3M FELT, RELEASE ARM OIL

9^5 BLOCK, RELEASE ARM CATCH 5 SL-563OV SCREW, CATCH BLOCK

SPGL-I735S SPRING, RELEASE ARM (TENSION

9/16" X 3-1/8")

9^8 ROD, RELEASE ARM TRIP 5 SL-595IV SCREW, TRlP ROD ADJUST 1NG

NL-II29K CHECKNUT, ADJUSTING SCREW

959A CONNECTION, trip rod k PL-I399P PIN# trip rod CONNECTION

PL-705P PIN, CONNECTION P|N COTTER

(3/32" X 5/8")

WL-327T WASHER, TRIP ROD CONNECTION NL-475K NUT, TRIP ROD CONNECTION (2) PL-IO55P PIN, CONNECTION NUT COTTER

(5/64" X 1/2")

USMC -19- ICM

(25)

impact mount parts ✩ ^PLATE

1418A+ plate, base - ASSEMBLED

WITH 1-1419A, 2-11^20 2

PIN, CENTER 2

ll^20 PLUG, COLUMN BEARING (2) 2

1421 platform, LOADING 2

1423 PLATE, LOWER SPRJNG THRUST 2 SPGL-2273S SPRING, COMPRESSION

(compression I-I/8" X 4-1/4") (4)

1424 SCREW, SPRING (4) 2

WL-I79T SPACER, SCREW (4)

I425A STEM, UPPER SPRING

THRUST PLATE 2

NL-28M2 nut, machine attaching

{5/8"-i8nf, 35/64" thick)

WL-5I2T WASHER, ATTACHING NUT

1427 STEM, UPPER SCREW PLATE 2

NL-1202K NUT, compression spring

SCREW (4)

PL-3I86P PIN, SPRING SCREW NUT

COTTER (3/32" X 1-1/4") (4)

1428 PLATE, COLUMN attaching 2

1429A column (2) 2

WL-1924T WASH ER, column

lubrication (8)

PL-5053P PIN, COLUMN RETAINING

COTTER (1/16" X 1") (2) 1430+ HEAD, COLUMN - ASSEMBLED

WITH 2-1420 2

1420 PLUG, COLUMN BEAR ING (2) 2 NL-28U2 NUT and CHECKNUT, column

HEAD (hex. 5/8"-i8nf,

3/8" thick] (2)

WL-3OI2T WASHER, HEAD NUT

1431 SCREW, COLUMN ADJUSTING

PLATE 2

NL-I9MI CHECKNUT, PLATE SCREW

(5/i6"-i8nc X 19/64"

THICk)

USMC -20- ICM

(26)

IMPACT MOUNT PARTS - CONT'D. PLATE

'[h^Z SHIELD 2

SL-12H1| screw, shield (hex.

SOCK. HO. CAP 1/V-28NF

X 3/8"! (3)

WL-yOboT WASHER, shield screw (3l 1^33A MOUNT, IMPACT - COMPLETE,

viz: 1-1M8a+, 1-li|2l, l-lto, 4-SPGL-2273S, h-\kzk, 4.WL-179T, . 1-1425A, I-NL-28M2,

1-WL-512T, 1-1427, 4-NL-1202K, 4-pl-3186p, 1-1428, 2-1429A,

8-WL-1924T, 2-PL-5053P, l-l430f, 2-NL-28U2, 1-WL-3012T, 1-1431, 1-NL-19M1, 1-1432,

3-SL-12H4, 3-WL-7066T (4)

1434+ SUPPORT, WASTE BOX {left

HANdJ - ASSEMBLED WITH

1-1435, l-SL-nvl3 2

l436f SUPPORT, WASTE BOX [right

hand] - ASSEMBLED WITH

1-1435, 1-SL-11V13 2

^ 1437+ SUPPORT, CLOTH PAN - ASSEMBLED WITH l-l435,

I-SL-IIVI3 (2) 2

# 1435 CLAMP

SL-IIVI3 BOLT, CLAMP (ro. hd.

STOVE 5/i6"-18nc X 1"]

0 For outstanding machines

EQUIPPED WITH CLOTH PAN

No. 735 AND 752.

USMC -21- ICM

(27)

STARTING MECHANISM PLATE

^89 HANDLE, STARTING

(aluminum) 9

SPINDLE, HANDLE (see PL-37t2P)

WL-57OT FELT, HANDLE CUSHION

906 LEVER, STARTING (for

Beams Nos. 13^5+* 11^7

AND 1096+} 9

■A 1382 LEVER, STARTING (for Beams Nos. 137^

11+05+] 9

■frf- 1383 LEVER, STARTING (for Beams Nos, I37I+*

1376+ AND II+05+) 9

Tfrf- I38I+ LEVER, STARTING (for

Beam No. 13^5+)

■^1133 LEVER, starting (for Beams Nos. IO77A and 1371+]

SL-828V SCREW, starting lever set (2)

1385 RING, starting (for all

Beams] 9

•(rf 1181+ RING, start Ing (for all

Beams] 9

CAM-22 cup, ring oil (Gits Bros.

#1202 STYLE "l", hinge

cover, elbow l/lt"-32]

PL-5I56P PIN, starting ring

13+5 LEVER, STARTING ring 9 I3I+6 EXTENSION, LEVER

(2 halves] 9

SL-I+J30 SCREW, LEVER EXTENSION (hex. hd. cap 5/l^"-2l+NF X 3-1/2"]

t For use with safety device.

USMC -22- ICM

(28)

STARTING mechanism - CONT^D. PLATE NL-18m1 nut, extension bolt

(5/16"-24nF, I7M"

thick)

WL-509T LOCKWASHER, extension BOLT (5/16" POSITIVE lock) (2)

13^7 LEVER, STARTING RING - COMPLETE, VI 2: 1-131*5,

1-1316, 1-SL-1J30,

1-NL-18M1, 2-WL-509T

621A PIN, LEVER FULCRUM 9

SL-6914v screw, FULCRUM PIN SET PL-2^3P PIN, FULCRUM PIN COTTER

(3/32" X 3/!*") (2)

FL-3M FELT, FULCRUM PIN OIL HOLE (2)

1386 COVER, STARTING RING

LEVER (front) 9

1073 COVER, STARTING RING

LEVER (rear) 9

SL-6776V SCREW, COVER (l|)

107!^ COVER, STARTING RING

LEVER - COMPLETE, VlZt

1-1386, 1-1073,

i+-SL-6776v

FL-2M FELT, cover oil hole (2) SPGL-985S SPRING, STARTING RING

LEVER (tension 13/1^"

X 6-1/16")

616 BAR, LEVER SPRING 9

520 COLLAR, BAR 9

617 HOOK, LEVER SPRING 9 NL-363K NUT, HOOK THUMB

570 ROD, LEVER CONNECTING 9

NL-17K CHECKNirr, ROD

I170 CONNECTION, rod 9

PL-2024P PIN, ROD CONNECTION

USMC -23- I CM

(29)

STARTING MECHANISM - CONT'D. PLATE PL-1055P PIN, CONNECTION PIN

COTTER (5/6^" X

1/2") {2l

482 PIN, ROD CONNECTION

- (large) 9

618 PIN, ROD CONNECTION

(lower) 9

SAFETY DEVICE ✩

1185 BRACKET, operating lever (for Beams Nos, IO77A,

109^, 1167 AND 1365+) 10 1387 BRACKET, operating lever

(for Beams Nos. I37I+

AND I376f) 10

✩ 1409 BRACKET, operating lever

(for Beam Nos. 1405+) 10 SL-1793V SCREW, bracket(2)

1180 LEVER, operating 10

PL-1518p pin, lever taper

1189 SHAFT, operating lever 10 RING, starting (see No. Il84) 1190 KNOB, operating (2) 10 PL-I5I9P PIN, knob taper (2)

1191 shaft, knob 10

1192+ PAWL, safety - assembled WITH l-PLU-2049,

I-PL-263IP 10

PLU-2049 BUSHING, PAWL 10

PL-2631P PIN, PAWL

SL-5219V SCREW, pawl stop SPGL-3054S SPRING, stop screw

(compression 11/32" X 3/'t")

WL-30OT WASHER, SPRING PL-5I57P SHAFT, SAFETY PAWL

SL-I83OV SCREW, SHAFT SET

USMC -24- I CM

(30)

SAFETY DEVICE - CONT»D. ✩ PLATE

1193 SL-I53OV SL-I53OV 51-2416V NL-233K 1194 NL-233K

SL-7627V NL-I78K 1195 SL-2461V

NL-245K SPGL-1850S 1196

SL-12H8

1197+

PL-2166P SPGL-1162S

SL-70^V

FL-3feM PL-5158P 1198 PL-1518P

1189 SPGL-2306S

PL-5159P

SL-7626V

1199

PL-1518P

1200

PL-I5I8P

RING, SAFETY PAWL 10

SCREW, RING CENTERING (2) SCREW, SCREW CHECK (2)

SCREW, PAWL RING

ADJUSTlNG

NUT, ADJUSTING SCREW

CLAMP, PAWL RING 10

NUT, PAWL R|NG CLAMP

SCREW, PAWL RING PIVOT (2) NUT, PIVOT SCREW (2]

LATCH, PAWL 10

STUD, PAWL LATCH NUT, LATCH STUD SPRING, PAWL LATCH

(tension l/8" X 3/^"l

COVER, LATCH 10

SCREW, LATCH COVER (hEX.

SOCK. HD. CAP 1/4"-28NF

X 5/8") {3I

CRANK, PAWL BELL -

ASSEMBLED WITH 1-PL-2166P 10 PIN, BELL CRANK

SPRING, BELL CRANK

Ctension 1A" X 1-9/16"}

EYE, BELL crank screw FELT, BELL CRANK

BUTTON, BELL crank (2)

LEVER, DOUBLE 10

PIN, DOUBLE lever TAPER

SHAFT, DOUBLE LEVER 10 SPRING, DOUBLE LEVER

equal IZ1NG (compression

3/16" X 1"] (2)

PLUNGER, EQUAL IZING SPRING (2]

PLUG, SPRING PLUNGER (2)

JOINT, UNIVERSAL (upper) 10

PIN, UNIVERSAL JOINT TAPER

JOINT, UNIVERSAL (lower)

PIN, UNIVERSAL JOINT TAPER

USMC -25- ^ICM

(31)

SAFETY DEVICE « CONT'D. ✩ ^PLATE

1202 SHAFT, sliding (for

Beam No. 1365+) 10

1203 SHAFT, SLIDING (for

Beams Nos.

1096+, 1167. I37I+,

I376f AND 1405+j 10

1205 SLEEVE, sliding shaft 10

SL-lif52V SCREW, sleeve set (2)

1206 KEY, SLIDtNG SHAFT 10

INTERMEDIATE LEVER AND TRIP LEVER PARTS 501 LEVER, INTERMEDIATE

50^ PIN, LEVER FULCRUM

SL-532V SCREW, FULCRUM PIN SET

FL-^M FELT, intermediate lever

OIL HOLE

505 BLOCK, LEVER CATCH.

SL-1211V SCREW, CATCH BLOCK

^06 LEVER, TRIP

PL-54I8P PIN, TRIP LEVER FULCRUM SL-3528V SCREW, TRIP LEVER SET

- 13^8 CHECKNUT, SET screw WL-508T LOCKWASHER, checknut

(l/4" POSITIVE lock]

505 BLOCK, TRIP LEVER CATCH SL-l2nV SCREW, CATCH block

SPGL-i|03S SPRING, trip lever

(tension 3/S" X 3-3A")

LH-315 ^YE, SPRING SCREW 552A HOOK, SPRING

12 12

12

12 12 CLICKING BLOCK APRON PARTS

6^0 APRON (regular)

■A- 1097 APRON (for SMALL CUTTING block)

✩ 989 APRON (ifV)

USMC -26- ICM

(32)

CLICKING BLOCK APRON PARTS - CONT'D. PLATE

6k'[ FULCRUM, APRON (2) 6 SL-II+93V SCREW, FULCRUM SET (2}

642 ROD, APRON (2] 6

NL-51K NUT, APRON ROD (2]

643 BRACKET, APRON rod (2) 6

SL-2297V SCREW, bracket

644 CHAIN, APRON [#^0 COPPERED STEEL SASH, 8-I3/I6'*

LONG, 16 L)NKS] (2]

6^5 HOOK, APRON CHAIN (rIGHT

hand) O

6k6 HOOK, APRON CHAIN (left

hand) 6

PL-lOh? PIN, APRON CHAIN COTTER

(1/8" X 1/2"] (2)

Q\1 BOX, WASTE (if2" X 13-1/2"

X 10-3/8"]

672 SUPPORT, WASTE BOX AND

CLOTH BOX (right HANd) 6

673 SUPPORT, WASTE BOX AND

CLOTH BOX (left HANd) 6

WOODEN SHELF PARTS

(Used with Small Size Block)

1098 SHELF (right hand) 8

1100 BRACKET, shelf 8

SL-IIPI5 SCREW, SHELF bracket (#12 flat hd. wood, 1" long] [3]

1099 ROD, SHELF BRACKET (S) 8

SL-I45V SCREW, ROD set (2) SPGL-25IIIS SPRING, SHELF BRACKET

(compression 13/16" X 3")

WL-n38T WASHER, spring

PL-5O32P PIN, SHELF BRACKET ROD

COTTER (1/8" X 7/S")

WL-I562T WASHER, BRACKET STOP

USMC -27- I CM

(33)

WOODEN SHELF PARTS (Used

WITH Small Size Block] - Cont*d, 'tf PLATE SL-5275V SCREW, STOP WASHER

* 1103 SHELF (right hand) - complete, viz: t-1098, 1-1100, 3-SL-IIPI5,

2-1099, z-si-iky^,

I-SPGL-25MS, I-WL-II38T, 1-PL-5032P, I-WL-1562T,

I-SL-5275V

1101 SHELF (left hand) 8

1100 BRACKET, shelf 8

SL-11P15 SCREW, shelf bracket (#12 FLAT HD, wood, 1" long] (3]

1099 ROD, SHELF bracket (2] 8

SL-H5V SCREW, ROD SET (2) SPGL-25^1S SPRING, shelf bracket

(compression 13/16" X 3"!

WL-1138T WASHER, spring

PL-5032P PIN, SHELF BRACKET ROD

COTTER (1/8" X 7/S"l WL-I562T WASHER, BRACKET STOP

SL-5275V SCREW, STOP WASHER

^ 1104 SHELF (left hand) - COMPLETE, viz: 1-1101, 1-1100, 3-SL-IIPI5, 2-1099, 2-SL-lit5V,

I-SPGL-254IS, I-WL-II38T,

1-PL-5032P, 1-WL-1562T, 1-SL-5275V

SIDE TABLE PARTS ✩

675 TABLE, SIDE

SL-6179V SCREW, SIDE TABLE (3)

676 HOLDER, SIDE TABLE SL-380IV SCREW, HOLDER binding

677 STEM, HOLDER

678 BRACKET, SIDE table

USMC -28-

ICM

(34)

SIDE TABLE PARTS - CONT*D. ✩ PLATE

679+ SCREW, BRACKET CLAMPING - ASSEMBLED WITH l-PL-l830P PL-I83OP handle, screw

SL-27IW SCREW, BRACKET BINDING (to table)

WL-893'r WASHER, BINDING SCREW 1^91 A TROUGH

CLAMP, TROUGH (see No, 1i-93]

^ 680 TABLE, SIDE - COMPLETE,

viz: 1-675, 2-SL-6I79V, 1-676, 1-SL-38o1V, 1-677,

1-678, 1-679+, I-SL-27UV, I-WL-893T, 1-491A

CLOTH HOLDING DEVICE ir 1110

1111+

1112+

pl-34i6p SL-6535V

WL-505T

1113

1114

sl-2314v

WL-509T 1115+

111^

pl-34i6p

SL-925V

ARM, CLOTH CLAMPING (2) BRACKET, ARM (right

hand] - ASSEMBLED WITH 1-PL-3416p

BRACKET, ARM (left hand) - ASSEMBLED WITH

I-PL-34I6P

PIN, BRACKET SPRING

SCREW, BRACKET BINDING (2) WASHER, BRACKET SCREW (2) SPACER, BRACKET SUPPORT (2) SUPPORT, BRACKET (2)

SCREW, SUPPORT clamping (4) WASHER, clamping screw (4)

LEVER, CLOTH CLAMPING ARM

STOP (right hand) -

assembled with 1-PL-3416p

LEVER, CLOTH CLAMPING ARM STOP (left hand) -

ASSEMBLED WITH 1-PL-3416P

PIN, LEVER SPRING

SCREW, ARM STOP SET (2)

11

11 11

11

USMC -29- ^ICM

(35)

CLOTH HOLDING DEVICE - CONT'D, if PLATE

SPGL-26I+3S SPRING, ARM STOP (tension 5/S" X

h-3/Qn (21

1178 COLLAR, SPRlNG

RETAINING (2) 11

SL-3I9W SCREW, RETAINING COLLAR (2) CL-50J COLLAR, arm adjusting (2) SL-3748V SCREW, COLLAR SET (2)

t 1117+ SUPPORT, CLOTH (for 36"

table) - ASSEMBLED WITH

1-1118, 5-SL-9PII 11 1118 STIFFENER, support 11 SL-9PII SCREW, STIFFENER (#10 FLAT

HEAD wood, 3/^" long) (5)

t 1119+ SUPPORT, CLOTH (for IfO"

table) - ASSEMBLED WITH

1-1120, 5-SL-9P11 11 1120 STIFFENER, support 11 SL-9PII SCREW, STIFFENER (#10 FLAT

HEAD WOOD, 3/^" long ) C5)

SL-9BII BOLT, SUPPORT BINDING (SQ.

NECK CARRIAGE 3/8"-16NC X 1-1/2") (1|)

WL-5IOT WASHER, BINDING BOLT (4) 1121 BOX, CLOTH [if8" X 13-1/2"

X 10-3/8")

1122 DEVICE, cloth holding - complete, viz: 2-1110,

1-1111+, 1-ni2+, 2-SL-6535V,

2-WL-505T, 2-1113, 2-1114,

4-sl-2314v, 4-WL-509T,

1-III5+, 1-111^, 2-SL-925V,

2-SPGL-2643S, 2-1178,

2-SL-3I94V, 2-CL-5OJ,

2-SL-3748V, 1-(1117+ or 1119+),

4-SL-9B11, 4-WL-510T, 1-1121

t Orders must specify size of Table THE Device is to be used on.

USMC -30- ICM

(36)

CLOTH CARRIAGE

(For Wide Material) ✩ PLATE

1152 BRACKET, CLOTH box

(right hand) 6

SL-3879V SCREW, bracket adjusting (3)

NL-75K NUT, ADJUSTING SCREW (3]

1153 BRACKET, CLOTH box

(left hand) 6

SL-3879V SCREW, BRACKET adjusting (3) NL-75K NUT, adjusting screw (3)

1154 ROD, FRAME TIE (fRONt) D

1154 ROD, BRACKET tie 6

nl-6o8k nut, tie rod (k)

1155 SHAFT, CLOTH BOX ROLL (2) 5 SL-73V SCREW, SHAFT SET (2)

RL-1|^G ROLL, CLOTH box (4)

WL-69T WASHER, roll (i|]

PL-121P PIN, ROLL COTTER (3/32"

XI") {k)

1156+ BOX, CLOTH - assembled

WITH 2-1157, 4-1158,

32-SL-9P11

1157 TRACK, CLOTH BOX (2) 6 1158 ANGLE, CLOTH BOX

CORNER (4) 5

SL-9PII SCREW, ANGLE AND TRACK (#10 flat hd. wood,

3/4" long) (32) ^

1159 TRACK, retaining (2) 6

SL-9B9 BOLT, RETAINING TRACK (sQ. NECK CARRIAGE

3/8"-i6nc X 1-1/4") f8)

WL-5IOT WASHER, TRACK BOLT (3/8"

positive lock) (8)

1160 SPACER, RETAINING TRACK (4) 5 SL-7402V BOLT, SPACER (sQ. NECK

CARRIAGE 3/8"-16NC X 4") (4)

WL-5IOT WASHER, SPACER bolt (3/0"

positive lock) (4)

USMC -31-

(37)

CLOTH CARRIAGE

[Tor Wide Material) - CONT'D, ir PLATE n6l SUPPORT, CLOTH HOLDING (2) 6 SL-9B15 BOLT, SUPPORT (so. neck

CARRIAGE 3/8"-1^NC X

2") (6)

WL-510T WASHER, support (3/8"

POSITIVE lock] (6]

1162 CLAMP, CLOTH (6] 5

SL-3909V SCREW, CLOTH CLAMP (6)

1163 ARM, CLOTH CLAMPING (2] 6

1111+ BRACKET, ARM (right hand) - ASSEMBLED WITH

l_PL-3in6p 11

1112+ BRACKET, arm (left hand] - ASSEMBLED WITH

l-PL-3ifl6p 11

PL-3i|l6P PIN, BRACKET SPRING

SL-D535V SCREW, BRACKET BINDING (2)

WL-505T WASHER, SCREW (7/16"

POSITIVE lock) (2]

111^^ SUPPORT, BRACKET (2) 11 SL-2297V SCREW, BRACKET SUPPORT (^)

WL-992T WASHER, screw {k)

III5+ LEVER, CLOTH clamping arm STOP (right hand) -

ASSEMBLED WITH 1-PL-3^16P 11 11l6f LEVER, CLOTH CLAMPING ARM

STOP (left hand] -

ASSEMBLED WITH 1-PL-3^16P 11 PL-3i^l6P PIN, LEVER SPRING

SL-925V SCREW, ARM STOP SET (2]

SPGL-26^3S SPRING, ARM STOP (tension 5/8" X if-3/8") (2]

CL-50J COLLAR, ARM ADJUSTING (2) SL-3748V SCREW, collar (2)

ll64+ SUPPORT, CLOTH - ASSEMBLED

WITH 1-1165, 8-SL-9P11 6

1165 STIFFENER, support 6

USMC -32- ICM

(38)

CLOTH carriage

(For Wide Material) - CONT^D. PLATE

SL-9P11

SL-9BI3

WL-5tOT ifr lt66

WRHL-216h

✩ WRHL-21+OH

SCREW, STIFFENER (#10

FLAT HD. WOOD, 3/4"

long) (8)

BOLT, SUPPORT BINDING (SQ. NECK CARRIAGE

3/8"-i6nc X 1-3A") (4)

WASHER, BINDING SCREW

(3/8" POSITIVE lock) (4)

CARRIAGE, cloth (for wide material) - complete, viz: 1-1152, 3-SL-3879V,

3-NL-7^K, 1-1153,

3-SL-387OV, 3-NL-75K, 2-1154, 4-NL-688K,

2-1155. 2-SL-73V, 4-RL-463G, i[-WL-69T,

4-PL-121P, 1-1156+,

2-1159, 8-SL-9B9, 8-WL-510T, 4-n6o,

4-SL-7402V, 4-WL-510T, 2-1161, 6-SL-9B15,

6-WL-510T, 6-1162,

6-sl-3909V, 2-1163,

1-1111+, 1-1112+,

2-SL-6535V, 2-WL-505T, 2-11li+, 4-SL-2297V, 4-WL-992T, I-III5+,

1-1116+, 2-SL-925V,

2-SPGL-261I3S, 2-CL-50J,

2-SL-3748V, 1-1164+,

4-SL-9B13, 4-WL-510T

MISCELLANEOUS

WRENCH, double end flat

(17/64" X 3/8")

WRENCH, double end flat

(3/8" X 5/8")

USMC -33- ^:CM

(39)

MISCELLANEOUS - CONT*D. ^PLATE

WRHL-2762H

✩ WRHL-246H

WRHL-8677H

✩ WRHL-23^H WRHL-153H ir WRHL-83H WRHL-269H

WRHL-339H

WRHL-527H

WRHL-1|71H WRHL-IO5H

✩ WRHL-3i|0H

CZRI3A SL-7L21

NL-21U2

WRENCH, DOUBLE END FLAT

(3/8" X

[3/V' X 1-1 A")

(7/8" X 1-1/16")

WRENCH, SINGLE END FLAT

(1/2")

WRENCH, PIN (1/4" DlA.)

WRENCH, ALLEN (5/16"

HEX. }

WRENCH, allen(3/8" hex.)

WRENCH, SPECIAL BOX

(for No. -[kk-l) (27/32"

HEX. )

WRENCH, SINGLE END BOX

(for No. 1393)

Cl-13/16" HEX. iV*

handle)

WRENCH, special box

(,625" hex.)

WRENCH, SOCKET (1/2"

hex.) (for SL-4J30I

WRENCH, PIN spanner

(3-1/8")

CAN, 01l (3" SPOUT, 5 oz. capacity) SCREW, HOLDING (for

REVERSING STRIKING

face] (sQ, HD. SET

3/8"-16NC X 2-iA")

NUT, HOLDING screw

(hex. 3/8"-16nC,

I5/6V' thick)

10

USMC -3^- ^ICM

(40)

NDIVIDUAL MOTOR DRIVE ✩ PLATE

Three-Phase Service, Alternating Current,

60 Cycles 220, if4o and 550 Volts

Two-Phase Service, Alternating Current, 60 Cycles 220 and 1|40 Volts

Single-Phase Service, Alternating Current,

60 Cycles 115 230 Volts

MOTOR (to order - specify

motor plate reading when

order Ing]

t ED-if30i^ TERMINAL 0 ED-i|250 TERMINAL

t0 SL-9D7 SCREW, TERMINAL (rO. HD.

MACH. #6-32nc X iA"]

t0 NL-9M9 NUT, screw (#6-32NC,

7/6I1" thick]

GROUP OF COMMON PARTS

SL-9B13 BOLT, motor (sq. neck

carriage 3/8"-16nC X

1-3A") m

NL-5I82K NUT AND CHECKNUT, motor

bolt (8)

WL-5IOT WASHER, motor bolt (^) ft I30W PULLEY, motor (regular) -

assembled with I-SL-I7SI7 SL-I7SI7 SCREW, PULLEY SET (hEX.

sock, SET 3/S"-16NC X 5/8")

tt 13*'^ BELT, driving (regular) - (matched SET of 2] {ifAfk Goodyear, #37^0 Gilmer)

t Replacement parts for three-phase

220, 1+ij-O and 550 volt and two-phase 44o volt services, 0 Replacement parts for two-phase

220 volt service only,

tt P'oR low speed ^25 R.P.M,

USMC -35- I CM

(41)

INDIVIDUAL MOTOR DRIVE - CONT'D, "tr PLATE

GROUP OF COMMON PARTS - CONT'D.

it00 131IH- PULLEY, MOTOR -

ASSEMBLED WITH

I-SL-17S17 7

SL-I7SI7 SCREW, PULLEY SET (hex. sock, set

3/8"-i6nc X 5/8")

☆001319 BELT, DRIVING (matched SET OF 2) (#PA75

Goodyear, #375"^ Gilmer]

PL-3658P PIN, base hinge

SL-3I02V SCREW, HINGE PIN SET

955 BRACKET, BASE (right

hand) 7

SL-8i61V screw, base bracket (short)

SL-8i60V screw, base bracket (long)

NL-29M2 NlfT, bracket screw

(5/8"-iinc, 39/6^"

thick) (2)

WL-5I2T LOCKWASHER, bracket screw

(5/8" POSITIVE lock) (2]

1321 BRACKET, BASE (left hand) 7

SL-816IV SCREW, bracket (short)

SL-8I60V SCREW, BRACKET (long)

NL-29M2 NUT, bracket screw

(5/8"-nNc, 39/6^"

thick) (2)

WL-512T LOCKWASHER, bracket screw

(5/8" POSITIVE lock) (2)

1315 SCREW, MOTOR BASE

ADJUSTING 7

USRA-3I+A KNOB, ADJUSTING SCREW 7 PL-I8O3P PIN, KNOB TAPER

1317 BLXK, ADJUSTING SCREW

SWIVEL 7

00 For high speed 5OO R.P.M,

USMC -36- I CM

(42)

INDIVIDUAL MOTOR DRIVE - CONT'D. ✩ PLATE GROUP or COMMON PARTS - CONT'D.

PL-3362P PIN, BLOCK FULCRUM

SL-I7SI9 SCREW, FULCRUM PIN SET (hex. sock, set

. 3/8"-i6nc X 3/if"]

WRHL-I50H WRENCH, SET screw

(3/16" HEX. ALLEn)

NL-1166k nut, adjusting screw stop SL-3E9 SCREW, STOP NUT BINDING

(fil. head cap

1A"-20NC X 5/8")

1316 YOKE, ADJUSTING screw 7

1311 PIN, YOKE fulcrum 7

SL-t7Sl9 SCREW, fulcrum pin set (hex. socket set

3/8"-i6nc X 3/V']

SDL-78OY STUD, ADJUSTING screw

BlNDING

RXP_55 WHEEL, BINDING STUD HAND 7

\k66 PULLEY, DRIVING 7

BEARING, roller (see No- l^lbO)

SPACER, BEARING (see No. I46l)

PLATE, bearing end (see No. 1^162)

1308 GUARD, LOWER BELT 7 SL-17S19 SCREW, GUARD BINDING

(hex. socket SET

3/8"-16nc X 3A") (2]

1309 COVER, lower BELT GUARD 7 SL-7q87V SCREW, cover (5)

# 1467+ GUARD, UPPER BELT -

ASSEMBLED WITH I-PL-3663P

PL-3663P PIN, BELT guard

1468 PLATE, LUBRICATION PL-1721P PIN, PLATE (H)

1469 GUARD, UPPER BELT -

COMPLETE, viz: 1-1467+,

t-l468, 4-PL-I72IP 7

USMC -37- ^CM

(43)

INDIVIDUAL MOTOR DRIVE - CONT*D. if PLATE GROUP OF COMMON PARTS - CONT'D.

SL-8i46v screw, belt guard pin BlNDING (2]

ED-II156 BUTTON, PUSH

SL-IIA25 SCREW, PUSH BUTTON (fil. hd. mach,

#8-32NC X 1-1A")

WL-I697T LOCKWASHER, screw

(5/32" kantlink)

ED-II+5I INSULATOR, PUSH button ED-I452 CASE, PUSH BUTTON ED-lil57 COVER, CASE

SL-11D7 SCREW, CASE cover (ro, HD, MACH. #8-32NC X 1A") (2)

ED-I458 BLTTTON, PUSH - complete,

viz:

I-SL-IIA25, 1-WL-1697T,

l-ED-1451, I-ED-I452, I-ED-II157, 2-SL-11D7 SL-9V9 BOLT, PUSH BUTTON (rO,

HD, STOVE iA"-20NC X 3A"1 (2}

WL-508T WASHER, bolt (1A"

POSITIVE lock) (4)

1282 BRACKET , PUSH BUTTON 7

SL-1522V SCREW, bracket (2)

WL-510T WASHER, bracket screw

(3/8" POSITIVE lock] (2)

1172 LEVER, PUSH BUTTON

OPERATING 7

SL-28HIIV SCREW, LEVER FULCRUM

1173 LINK, lever 7

PL-6834P PIN, LEVER LINK

PL-IO55P PIN, LINK PIN COTTER

(5/64" X 1/2")

WL-36ST WASHER, LINK PIN

117^A ROD, PUSH BUTTON

OPERATING 7

USMC -38- ICM

(44)

INDIVIDUAL MOTOR DRIVE - CONT'D, if GROUP OF COMMON PARTS - CONT'D.

PLATE

iff 1207A

☆t 12o6

iff SL-2I75V iff NL-96OK PL-525OP WL-II7OT

PL-344P

1175 PL-15T9P

CL-258J

SL-4221V

1283 WL-II45T PL-1055P SPGL-1231S

1417+

PL-5059P SL-2727V NL-475K PL-3295P

SL-2656V

1177+

PL-5059P

SL-2656V

SPGL-2068S SL-7V11

8

8 ROD, PUSH BUTTON

GUIDE, ROD 8

SCREW, GUIDE NUT, GUIDE SCREW PIN, ROD CONNECTING

WASHER, CONNECTING PIN (2)

PIN, CONNECTING PIN

COTTER (1/8" X 3A") (2)

HANDLE, PUSH button

OPERATING

PIN, HANDLE TAPER

COLLAR, operating rod (2) SCREW, COLLAR set (2]

PLUNGER, PUSH BUTTON WASHER, PLUNGER PIN, PLUNGER COTTER

[5/64" X 1/2")

SPRING, PLUNGER

(compression 15/32" X 1-3/8")

LEVER, locking - assembled

WITH I-PL-5059P 7

PIN, LEVER spring

SCREW, locking lever stop CHECKNUT, stop screw PIN, LEVER fulcrum SCREW, FULCRUM pin SET ARM, LOCKING LEVER SPRING -

ASSEMBLED WITH I-PL-5O59P ^

PIN, LEVER SPRING SCREW, SPRING ARM SET SPRING, LOCKING LEVER

(tension 17/32" X 2")

BOLT, STARTER (rO. HD.

STOVE 3/16"-24nC X 7/8") (3)

f For use with safety device.

USMC -39- ^CM

(45)

INDIVIDUAL MOTOR DRIVE - CONT*D. ✩ GROUP or COMMON PARTS - CONT'D.

PLATE

WL-1837T 11^71 SL-IJ+32V

WL-3IOT

PL-55ii8p ED-lt8cu6T2 ED-if8cu6T2

ED-lfFPC36

ED-ii565

ED-kONST

ED-4C0N90S WL-yiflT

1472 SL-7237V

ED-5859

SL-I7DI3 SL-7237V

ED-ifrpci5

ED-1I565 ED-i+C0N90S WL-7I1IT ED-il256

LOCKWASHER, bolt (3/I6"

LIGHT lock) (3)

BRACKET, MOTOR starter

SCREW, BRACKET {2)

WASHER, BRACKET SCREW {2) RIVET, RATING PLATE (4) LEAD (push button to motor

STARTER, CODE #1)

LEAD (push button to motor STARTER, CODE #3)

CONDUIT, LEAD (push button TO motor starter)

BUSHING, GROUNDING (2) CONNECTOR (push button end)

CONNECTOR

WASHER, connector (2) SPACER, conduit

SCREW, conduit spacer CLIP, conduit (2)

SCREW,CONDUIT clip(ro. hd.

MACH. iA"-20NC X 7/16"]

SCREW, CONDUIT CLIP CONDUIT, LEAD (motor to

MOTOR starter)

BUSHING, GROUNDING (l/2") (2) CONNECTOR (2)

WASHER, CONNECTOR (2]

TERMINAL, ground wire

PECULIAR PARTS

Three-Phase A.C. 60 Cycles, 220, 4^0 AND 55® Volts

1360 BASE, motor

ed-10016 starter, magnetic motor (220 volts)

ED-10017 STARTER, magnetic motor (Ao volts]

USMC -ifO- ICM

(46)

INDIVIDUAL MOTOR DRIVE - CONT*D. ✩ PECULIAR PARTS - CONT'D.

Three-Phase A.C. 6o Cycles, 220,

AND 550 VOLTS - Cont'd.

ED-IOOI8 STARTER, MAGNETIC MOTOR (550 volts)

ED-GE8lD5ifl HEATER (220 volts] (2)

ED-GE8ID532 HEATER [kkO volts] (2]

ED-GE81D^8 HEATER (55O volts) (2)

ED-1o6o1 PLATE, rating (220 volts]

ED-106o2 PLATE, rating (Wo volts)

ED-10603 PLATE, RAT 1NG (550 volts)

FF5320 DIAGRAM, WIRING (220 AND volts) FF5321 DIAGRAM, wiring (55O

volts]

ED-30DR6T2 LEAD (motor to motor STARTER, CODE #Tl]

ED-^0DR6T2 LEAD (motor to motor starter, code #T2]

ED-30DR6t2 LEAD (motor to motor starter, code #T3) Two-Phase A.C. 60 Cycles,

220 AND kko Volts

PLATE

1305 BASE, motor [220 volts) 1360 BASE, MOTOR {^40 volts]

ED-10021 STARTER, magnetic motor (220 volts]

ED-10022 STARTER, magnetic motor (HllO volts)

ED-GE81D539 heater (220 volts) (2' ED-Ge81D532 heater (4ilO volts) (2:

ED-l0o05 PLATE, rating (220 volts) ED-10606 PLATE, RATJ NG (^^0 volts)

FF5323 DIAGRAM, WIRING ED-3ODR6T2 LEAD (motor to motor

starter, code #P1) ed-4odr6t2 lead (motor to motor

starter, code #P1)

USMC -ifl- ^ICM

(47)

INDIVIDUAL MOTOR DRIVE - CONT'D. * PLATE PECULIAR PARTS - CONT'D.

Two-Phase A.C, 6o Cycles, 220

AND 44o Volts - Cont'd.

ED-30DR6T2 LEAD (motor to motor starter, code #P2) ED-^0DR6T2 lead (motor to motor

starter, code #P2) Single-Phase A.C, 6o Cycles,

115 AND 230 Volts

1360 BASE, motor 7

ED-10015 STARTER, magnetic motor (115 volts)

ED-10016 STARTER, magnetic motor (230 volts)

ED-GE8ID556 HEATER (115 volts] (2) ED-Ge81D548 heater (230 volts) (2)

ED-I0607 PLATE, rating (115 volts) ED-I06O0 PLATE, rating (23O volts)

DIAGRAM, wiring

ED-30DRbT2 LEAD (motor to motor STARTER, code #Tl) ED-30DR6T2 LEAD (motor to motor

starter, code #T3) ED-3DU6T2 lead (line 2 to line 3

IN MOTOR starter) 1^73 Motor Drive Attachment,

THREE-PHASE SERVICE,

alternating current, 60

cycles, 220 VOLTS, COMPLETE, viz: 1-group of common

parts, 1-1360, l-ED-10016,

2-ED-GE81D541, 1-ED-10601, I-FF5320, 2-ED-30DR6T2,

1-ed-5odr6t2

USMC -kZ- I CM

(48)

INDIVIDUAL MOTOR DRIVE - CONT'D. ✩ PLATE

1^7^ Motor Dr IVE Attachment,

ALTERNATING CURRENT, 60 CYCLES, 4^10 VOLTS, COMPLETE,

viz: 1-group OF common

PARTS, 1-1360, l-ED-10017, 2-ED-GE8ID533, l-ED-10602,

I-FF532O, 2-ED-30DR6T2,

1-ED-40DR6t2

1^75 Motor Drive Attachment,

ALTERNATING CURRENT, 6O

CYCLES, 55^ VOLTS, COMPLETE, viz; 1-group of common

PARTS, 1-1360, I-ED-IOOI8,

2-ed-ge8id238, 1-ED-10603, 1-FF5321, 2-ED-30DR6t2,

1-ED-40DR6t2

1^7^ Motor Drive Attachment,

TWO-PHASE SERVICE,

alternating current, 60

CYCLES, 220 VOLTS, COMPLETE, viz: 1-group of common

PARTS, 1-1305, 1-ED-10021,

2-ED-GE81D539, 1-ED-10605,

1-FF5323, 2-ED-30DR6T2, 2-ed-5odr6t2

1^79 Motor Drive Attachment,

TWO-PHASE SERVICE,

ALTERNATING CURRENT, 6O CYCLES, 4^0 VOLTS, COMPLETE,

viz: 1-GROUP OF COMMON

PARTS, 1-1360, 1-ED-10022, 2-ED-GE81D532, l-ED-10606, 1-FF5323, 2-ED-30DR6T2, 2-ed-5odr6t2

USMC -if3- ICM