SINGER
180W201
Form
3169w
(259)
Printed in U.S.A.
UST OF PARTS
SINCER**SEWING MACHINE 180w201
THE SINGER MANUFACTURING COMPANY
**A Trademark of THE SINGER MANUFACTURING COMPANY
INSTRUCTIONS FOR ORDERING
In ordering from this list, use ONLY the PART number in the FIRST column.
The number stamped on a Sewing Machine Part is the number of the Single Part only, except when the part includes Set Screws, Clamping Screws, Studs and Rollers Spun on, Small Wires riveted, or Parts soldered together, etc., which it is necessary to furnish in combination.
Every combination of parts sent out has its specific number which, although not stamped on Parts {except in above case) must be used when ordering the combination.
Each n'.lmber always indicates the SAME PART in whatever list it appears or for whatever Machine.
The letters after some of the numbers indicate the style of finish only, as follows:
AL ALX
c
D E F X XC
Heat Treated for Toughness.
Heat Treated for Toughness and Black Oxide.
Hardened only.
Polished only.
Soft, Not polished.
Hardened and Polished.
Black Oxide, for Iron and Steel.
Hardened and Black Oxide, for Iron and Steel.
These letters MUST BE USED when they appear in the list and AFTER the number,as in the list.
In this series:
1 to 1500,200001 to 201500 and 350001 to 351500 are Screw Numbers.
1501 to 1800,201501 to 201800 and 351501 to 351800 are Nut Numbers.
1801 to 2000,201801 to 202000 and 351801 to 352000 are Roller Numbers.
2001 to 50000 and 20 2001 to 3 50000 are Numbers of Machine Parts.
The figures in the second column refer only to the plate in which the illustration of the part is shown and are NOT TO BE USED in ordering.
These Plates are in Form 20500, Illustrations of Parts.
Parts marked with an asterisk (*) are furnished only when repairs are made at the factory.
No.
*264251 264002 204235 200004E 202005 202247 200278X 202248 204235 200004E 202005 264252 264253 237748 202260 200071E 207080 202244 200502X 350532E 264123 240361 200425C 200388C 200327C
G
""''~"'Tr0 C.I.a.,...
LIST OF PARTS COMPLETE FOR
MACHINE N0.180w201 SINGLE NEEDLE. LONG ARM.
DROP FEED. LOCK STITCH.
POST MACHINE
MAXIMUM LENGTH OF STITCH 4-1/2 TO THE INCH.
LINK TYPE TAKE-UP LEVER.
FOR HARNESS AND GENERAL STITCHING ON LEATHER WORK REQUIRING HEAVY THREAD.
MACHINE HAS CAPACITY TO HANDLE THREAD
Plate
---
---
19317 19317 19317 19301 19301 19301 19317 19317 19317 19301 19301 19301 19301 19301 19301 19301 19301 19301 19301 19301 19301 19301 19301
UP TO 10-6 CORD.
Name Arm
Arm Base
Arm Base Position Pin (2) Arm Base Screw (3)
Arm Base Screw Washer (3) Arm Cap
Arm Cap Screw
Arm Cap Screw Washer Arm Position Pin (2) Arm Screw (3)
Arm Screw Washer (3) Arm Shaft
Arm Shaft 264252 with 264278
Arm Shaft Bushing (back) with 202260
Arm Shaft Bushing (back} Oil Packing (wick}
Arm Shaft Bushing (back) Screw {3}
Arm Shaft Bushing (front) with 202244
Arm Shaft Bushing (front) Oil Packing (wick}
Arm Shaft Bushing (front) Oil Packing Thumb Screw Arm Shaft Bushing (front} Set Screw
Arm Shaft Connection Belt (reinforced neoprene) Arm Shaft Connection Belt Pulley with 200327C,
200388C, 200425C and two 202253
Arm Shaft Connection Belt Pulley Position Screw Arm Shaft Connection Belt Pulley Position Screw
Check Screw
Arm Shaft Connection Belt Pulley Set Screw
3
r
No.
202253
26~25~
200113F
22~139 20016~X
*26~255 5~897
233939
26~203
203211
*202056 203 212 203213
26~256 2~167~
2~1675 350~05C
203377
20098~C 20059~E
203215
20059~E
203 216
26~257 26~258
202135
200~62X 26~~0~
264~05 350393C 201518E 264291
26~031
200362C
20152~E
200263D 201528D
26~~11 26~~12
26~413
200578X 200024C
Plate 19301 19313 19313 19313 19313 19317 19308 19308 19308 19308 19308 19308 19308 19308 19308 19308 19308 19308 19308 19308 19308 19308 19303 19303 19303 19312 19312 19312 19312 19318 17255 17255 17255 17255 17255 17255 17255
17255 17255 17255
PARTS FOR MACHINE N0.180w201 Name
Arm Shaft Connection Belt Pulley Spring Flange Arm Shaft Connection Belt Timing Collar with
200113F
Arm Shaft Connection Belt Timing Collar Set Screw Arm Shaft Connection Belt Timing Plate
Arm Shaft Connection Belt Timing Plate Screw (2) Bed with 5~897
Bed Oil Cup Bobbin
Bobbin Case Base (eccentric) with 202056, 203211 to 203213 and 203216
Bobbin Case Base Latch Bobbin Case Base Latch Pin Bobbin Case Base Latch Plunger Bobbin Case Base Latch Spring
Bobbin Case Cap with 20098~C, 203215, 203377,
2~167~, 2~1675, two each 20059~E and 350~05C
Bobbin Ca.se Oiling Fe 1t
Bobbin Case Oiling Felt Retainer
Bobbin Case Oiling Felt Retainer Screw Bobbin Case Tension Spring
Bobbin Case Tension Spring Regulating Screw Bobbin Case Tension Spring Screw
Bobbin Case Thread Guide
Bobbin Case Thread Guide Screw Bobbin Case Washer {cloth)
Bobbin Case complete, Nos. 26~203 and 26~256
Face Plate
Face Plate Position Pin Face Plate Thumb Screw Feed Bar
Feed Bar 26~~0~ with 2000~0AL, 225837 and 267273 Feed Bar Hinge Screw (driving)
Feed Bar Hinge Screw Nut Feed Dog, for 264298 Feed Dog Lever
Feed Dog Lever Adjusting Screw Feed Dog Lever Adjusting Screw Nut Feed Dog Lever Hinge Screw
Feed Dog Lever Hinge Screw Nut Feed Dog Lever Post
Feed Dog Lever Post 26~~11 with 200098F, 2009~3F, 201525E,221212,26~031,26~035,26~~13,four
each 20005~E and 200578X
Feed Dog Lever Post Cover (side) with 200362C and
20152~E
Feed Dog Lever Post Cover (side) Screw Feed Dog Lever Post Screw (2)
~.
\
No.
203637 221212 200054E 200008C 203637 264035 200943F 201525E 200098F 240225 201181C 201518E 240226 240227 240554 240555 248415 248416 200382ALX 240231 350578XC 350562XC 240565 200333C 200346c 248502 264259 240228 200019E 202625 200383C 248449 200958C 264260 267273 200040AL 225837 223655 2001730 201220ALX 264261 248423 265045
'"--
"'"''~"~"o
~.~ ...
Plate 17255 17255 17255 17255 17255 17255 17255 17255 17255 19313 19313 19313 19313 19313 19313 19313 19313 19313 19313 19313 19313 19313 19313 19313 19313 19312 19312 19312 19312 19312 19312 19301 19301 19313 19312 19312 19312 19312 19312 19313 19313 19313 19313
PARTS FOR MACffiNE N0.180w201 Name
Feed Dog Lever Post Screw Washer (2) Feed Dog Lever Post Support
Feed Dog Lever Post Support Screw Feed Dog Lever Post Support Screw (2)
Feed Dog Lever Post Support Screw Washer (2) Feed Dog Lever Slide Block
Feed Dog Lever Slide Block Hinge Screw Feed Dog Lever Slide Block Hinge Screw Nut Feed Dog Screw
Feed Driving Connection with 240226 and 240227 Feed Driving Connection Hinge Screw
Feed Driving Connection Hinge Screw Nut Feed Driving Connection Oiling Felt
Feed Driving Connection Oiling Felt Retaining Wire Feed Driving Eccentric
Feed Driving Eccentric Adjusting Disc
Feed Driving Eccentric Adjusting Disc Spring
Feed Driving Eccentric Adjusting Disc Spring Collar with two 2003 82ALX
Feed Driving Eccentric Adjusting Disc Spring Collar Set Screw
Feed Driving Eccentric Friction Gib
Feed Driving Eccentric Friction Gib Adjusting Screw Feed Driving Eccentric Friction Gib Adjusting Screw
Set Screw
Feed Driving Flange with 200333C, 200346C, two each 350562XC and 350578XC
Feed Driving Flange Position Screw Feed Driving Flange Set Screw Feed Driving Rock Shaft
Feed Driving Rock Shaft 248502 with 201518E, 264405 and 350393C
Feed Driving Rock Shaft Crank with 200019E Feed Driving Rock Shaft Crank Pinch Screw
Feed Driving Rock Shaft Stop Collar with two 200383C (2)
Feed Driving Rock Shaft Stop Collar Set Screw Feed Indicating Disc with 200958C
Feed Indicating Disc Set Screw Feed Lifting Cam with 20 1220ALX
Feed Lifting Cam Fork with 200173D and 223655 Feed Lifting Cam Fork Screw
Feed Lifting Cam Fork Screw Washer Feed Lifting Cam Oiling Felt
Feed Lifting Cam Oiling Felt Screw Feed Lifting Cam Set Screw
Feed Regulating Stud
Feed Regulating Stud Cotter Pin Feed Regulating Stud Socket
5
No.
248425 264262 264263 264264 200242X 233390 227561 241683 201522E
*264243 264244 264265 223 867 201222C 200362C 264266 224111 202244 200327C 264038 200335C 264039 200327C 224112 20 1254C 202253 264246 201376C 201253F 264247 201409F 264267 264268 264292 200159F 221209 241507 200583X 200008C 203637
Plate 19313 19313 19317 19317 19317 19317 19317 19317 19301 19308 19308 19313 19313 19313 19313 19313 19313 19313 19313 19313 19313 19313 19313 19313 19313 19308 19308 19308 19308 19308 19309 19309 19309 19309 19309 19309 19309 19309 19309
PARTS FOR MACHINE N0.180w201 Name
Feed Regulating Stud Spring
Feed Regulating Stud complete, Nos. 248423,248425, 264261 and 265045
Foot Lifter Lifting Lever
Foot Lifter Lifting Lever 264263 with 200101D, 264284 and 350086C
Foot Lifter Lifting Lever Hinge Screw
Foot Lifter Lifting Lever Hinge Screw Washer Foot Lifter Lifting Lever Spring
Foot Lifter Lifting Lever Stop Finger Foot Lifter Lifting Lever Stop Finger Nut Hook (sewing)
Hook 264243 with 201253F, 201376E, 264246,264247 and two 20 1409F
Hook and Bobbin Case complete, Nos. 264244 and 264257
Hook Driving Gear (spiral) with 200362C and 201222C Hook Driving Gear Position Screw
Hook Driving Gear Set Screw Hook Driving Shaft
Hook Driving Shaft Bushing {back) with 202244
Hook Driving Shaft Bushing (back) Oi 1 Packing (wick) Hook Driving Shaft Bushing (back) Set Screw
Hook Driving Shaft Bushing (center)
Hook Driving Shaft Bushing (center) Set Screw Hook Driving Shaft Bushing (front)
Hook Driving Shaft Bushing (front) Set Screw Hook Driving Shaft Connection Belt Pulley with
202253 and two 201254C
Hook Driving Shaft Connection Belt Pulley Set Screw Hook Driving Shaft Connection Belt Pulley Spring
Flange Hook Gib
Hook Gib Hinge Screw Hook Gib Screw
Hook Needle Guard
Hook Needle Guard Screw Hook Post
Hook Post 264267 with 200555X, 203244, 264265 and 264270 to 264272
Hook Post 264268 with 221209,241507, 264269 and eight 200583X
Hook Post Clamping Screw Hook Post Cover Plate (back) Hook Post Cover Plate (front) Hook Post Cover Plate Screw 'Hook Post Screw (2)
Hook Post Screw Washer (2)
..
'"""\
No.
264269 264270 203244 200393C 264271 264272 200038C 200382ALX 200555X 264162
350419X 350107C 201346C 208613 264293 264273 200352AL 264274 201418C 264275 264276 264277 200374AL 200388C 264714 202330 200072C 264278 203172 200425C 200388C 200335C 264294 200590X 200125ALX 264279 207072 200352AL 264525 200653C 264280 200086ALX 235901 200054E 265060
Plate 19309 19309 19309 19309 19309 19309 19309 19309 19309 19301
19301 19301 19301 19304 19304 19304 19304 19304 19304 19304 19304 19304 19301 19301 19304 19304 19304 19301 19301 19301 19301 19301 19304 19304 19304 19306 19306 19306 19306 19306 19306 19306 19306 19306 19317
PARTS FOR MACHINE N0.180w201
Hook Post Slide Hook Socket
Name
Hook Socket Collar with two 200393C Hook Socket Collar Set Screw
Hook Socket Gear with two 200382ALX Hook Socket Gear Anchor with 200038C Hook Socket Gear Anchor Pinch Screw Hook Socket Gear Set Screw
Hook Socket Screw
Machine Pulley (disc) 11V" belt groove (outside diam.
of belt groove 4. 518 in.) (rim diam. 6-3/8 in.) with 201346C and 350107C
Machine Pulley Adjusting Screw Machine Pulley Position Screw Machine Pulley Set Screw Needle Bar
Needle Bar 208613 with 200125ALX, 200590X and 264294 Needle Bar Bushing (lower)
Needle Bar Bushing {lower) Set Screw Needle Bar Bushing (upper)
Needle Bar Bushing (upper) Set Screw Needle Bar Connecting Link
Needle Bar Connecting Link Stud with 264277
Needle Bar Connecting Link Stud Oil Packing {wick) Needle Bar Connecting Link Stud Set Screw
Needle Bar Connecting Link Stud Set Screw
Needle Bar Connecting Stud with 200072C and 202330 Needle Bar Connecting Stud Oil Packing (wick)
Needle Bar Connecting Stud Pinch Screw
Needle Bar Crank with 200335C, 200374AL, 200425C and two 200388C
Needle Bar Crank Friction Washer Needle Bar Crank Position Screw
Needle Bar Crank Position Screw Check Screw Needle Bar Crank Set Screw
Needle Bar Thread Guide
Needle Bar Thread Guide Screw Needle Set Screw
Presser Bar Bushing (lower) Presser Bar Bushing (upper)
Presser Bar Bushing Set Screw {2) Presser Bar Lifter
Presser Bar Lifter Hinge Screw
Presser Bar Lifting Bracket with 200086ALX Presser Bar Lifting Bracket Pinch Screw Presser Bar Position Guide with 200054E Presser Bar Position Guide Pinch Screw Presser Bar Spring {auxiliary)
7
PARTS FOR MACHINE N0.180w201
---~
No. Plate Name
207965 19317 Presser Bar Spring (flat)
210949 19306 Presser Bar Spring Bracket with 200086ALX 200086ALX 19306 Presser Bar Spring Bracket Pinch Screw 201410F 19317 Presser Bar Spring Regulating Screw 200224X 19317 Presser Bar Spring Support Screw
225004 19317 Presser Bar Spring Support Screw Washer
351839 19306 Roller Presser, 1-1/4 in. diam., 3/16 in. face {fine) with 1528X, 1766C, 50553C and twenty-four 16232 241916 19306 Roller Presser Arm
233807 19306 Roller Presser Arm Bracket
235088 19306 Roller Presser Arm Bracket Position Collar with 200362C
200117F 19306 Roller Presser Arm Bracket Position Collar Position Screw
200362C 19306 Roller Presser Arm Bracket Position Collar Set Screw
202558 19306 Roller Presser Arm Bracket Spring 202559 19306 Roller Presser Arm Bracket Spring Stop
200141F 19306 Roller Presser Arm Bracket Spring Stop Screw 200096D 19306 Roller Presser Arm Screw
16232 19306 Roller Presser Ba 11, 3/3 2 in. diameter 1766C 19306 Roller Presser Ball Cone
204732 19306 Roller Presser Bar
50553C 19306 Roller Presser Hinge Screw 1528X 19306 Roller Presser Hinge Screw Nut 241917 19306 Roller Presser Pawl
241918 19306 Roller Presser Pawl Spring
241922 19306 Roller Presser (no back) complete, Nos. 241916 to 241918 and 351839
264295 19306 Roller Presser and Bar complete, Nos. 200096D, 200117F,202558,202559,204732,233807,235088, 241922 and two 200141F
264281 19304 Take-up Lever
264299 19304 Take-up Lever Hinge Stud
200389C 19304 Take-up Lever Hinge Stud Set Screw 264282 19304 Take-up Lever Rocker Arm with 200389C
202400 19304 Take-up Lever Rocker Arm Hinge Stud with 202423 202423 19304 Take-up Lever Rocker Arm Hinge Stud Oil Packing
(wick)
200383C 19304 Take-up Lever Rocker Arm Hinge Stud Set Screw 264296 19315 Tension Bracket with 202108,264231 and 350518C 200159F 19315 Tension Bracket Screw
264231 19315 Tension Bracket Thread Guide Pin
264297 19315 Tension Bracket complete, Nos. 1560F, 3 2572, 200978X, 201572X,223438,223703,223704,223706,264235, 264289, 264296, 350519C, two 264283 and three 200309E
264283 19315 Tension Disc
No.
264284 200101D 350086C 223703 264285 200309E 264286 264287 200089X 264288 248423 264289 202108 200309E 350086C 223704
32572 223438 350518C
1560F 223706 200978X 264235 241360 200132E 350519C 200061ALX 201572X 204925 202412 234232 200113F 202101 241765 241766 241767 200142F 200142F 241768 241769 266106 201737 241771 201738 350432XC 201650X
Plate 19317 19317 19317 19315 19306 19315 19317 19317 19317 19317 19317 19315 19315 19315 19317 19315 19315 19315 19315 19315 19315 19315 19315 19315 19315 19315 19315 19315 19315 19301 19315 19315 19315 19303 19303 19303 19303 19303 19303 19303 19303 19303 19303 19303 19303 19303
PARTS FOR MACffiNE N0.180w201 Name
Tension Release Adjusting Plate
Tension Release Adjusting Plate Clamp Screw Tension Release Adjusting Plate Hinge Screw Tension Release Lever
Tension Release Lever Rod Tension Release Lever Screw Tension Release Operating Lever
Tension Release Operating Lever Bracket
Tension Release Operating Lever Bracket Screw (2) Tension Release Operating Lever Connection with
two 248423
Tension Release Operating Lever Connection Cotter Pin
Tension Release Operating Lever Tension Release Operating Lever Tension Release Operating Lever Tension Release Operating Lever Tension Release Plunger
Tension Release Washer Tension Spring
Tension Stud
Tension Thumb Nut Thread Controller Disc
Thread Controller Disc Screw Thread Controller Spring Thread Controller Spring Stop
(hand}
(hand) Guide Pin (hand} Screw Hinge Screw
Thread Controller Spring Stop Screw Thread Controller Stud with 204925 Thread Controller Stud Set Screw Thread Controller Stud Thumb Nut Thread Controller Stud Washer Thread Guide (top of Arm}
Thread Guide
Thread Guide Screw
Thread Guide Screw Washer Thread Lubricating Oil Pad (felt) Thread Lubricating Oil Pad Holder
Thread Lubricating Oil Pad Holder Bracket
Thread Lubricating Oil Pad Holder Bracket Screw Thread Lubricating Oil Pad Holder Screw
Thread Lubricator
Thread Lubricator Bracket
Thread Lubricator Bracket Washer Thread Lubricator Nut
Thread Lubricator Oil Tube
Thread Lubricator Oil Tube Connection Nut Thread Lubricator Screw
Thread Lubricator Screw Nut
9
No. Plate 214838 19303 241773 19303 264290 19315 200366X 19315 264298 19318 200577AL 19318
PARTS FOR MACHINE N0.180w201 Name
Thread Lubricator Screw Washer
Thread Lubricator complete, Nos. 201737, 201738, 241765 to 241769,241771,266106 and four 200142F Thread Retainer
Thread Retainer Set Screw
Throat Plate, 35 elongated needle hole, for needle sizes 24 and 25, for 264291
Throat Plate Screw (2)
No.
202258 200570E 233939 224121 41400 128x42 120342 120343 4822 11831 225498 228476 225554
259428 259429 200113F 225453 225454 244071 259660 225455 225456 259461 200380C 225381 225444 200056E 225458
Plate 19317 19317 19308 166q4 19320 19320 19320 19320 19320 19320 19320 19320
ACC~SSORI~S
Name Bed Hinge Connection (2)
Bed Hinge Connection Screw (4) Bobbin (2)
Drip Pan, 20 in. long, with four 3/4 in. wire nails Machine Rest Pin (wood)
Needles, six, size 25
Oiler (copper plated) with 120343 Oiler Spout, 3-1/2 in. long
Roller Presser Hinge Screw Nut Wrench Screw Driver {5 in. blade) {Machine, large) Screw Driver {7-1/4 in. long)
Screw Driver {Bobbin Case) Wrench (steel)
BOBBIN WINDER
(SWINGING AUTOMATIC, RIGHT HAND) FOR "V'' BELT DRIVE
17853 Bobbin Winder Brake (leather) 17853 Bobbin Winder Brake Clamp
17853 Bobbin Winder Brake Clamp Screw
17853 Bobbin Winder Frame with 244071 and 259660 17853 Bobbin Winder Frame Hinge Pin
17853 Bobbin Winder Frame Oil Packing {wick) 17853 Bobbin Winder Frame Oil Well Washer 17853 Bobbin Winder Frame Spring
17853 Bobbin Winder Frame Spring Plunger 17853 Bobbin Winder Pulley with 2003 SOC 17853 Bobbin Winder Pulley Set Screw 17853 Bobbin Winder Spindle
17853 Bobbin Winder Stop Latch
17853 Bobbin Winder Stop Latch Screw
17853 Bobbin Winder Stop Latch Thumb Lever
11
No. Plate
225~59 17853
225~59 17853
202~78 17853 200299X 17853
225~61 17853 200082D 17853 228026 17853
2102 17853
13710 17853
201~99X 17853 201572X 17853
225~62 17853 259662 17853
259~62 17853
ACCESSORIES Name
Bobbin Winder Stop Latch Thumb Lever Hinge Stud Bobbin Winder Stop Latch Thumb Lever Joint Stud Bobbin Winder Stop Latch Trip Lever
Bobbin Winder Stop Latch Trip Lever Hinge Screw Bobbin Winder Tension Bracket with 201~99X
Bobbin Winder Tension Bracket Screw
Bobbin Winder Tension Bracket Screw Washer Bobbin Winder Tension Disc
Bobbin Winder Tension Spring Bobbin Winder Tension Stud
Bobbin Winder Tension Stud Thumb Nut
Bobbin Winder Tension Bracket complete, Nos. 13710, 20 1572X, 225~61 and two 2102
Bobbin Winder and Tension Bracket Base
Universal Bobbin Winder complete, Nos. 200056E,
200082D,200113F,200299X,202~78,225381,225~~~.
225~53 to 225~56, 225458, 225462, 228026, 259428,
259~29, 259461, 259662, two each 225459 and wood screws 3/~ in., No. 12, R. H. B.
Note:Bobbin Winder 259~62 is furnished with this Machine unless Bobbin Winder 259431 is specified on order.
227779
20278~
228835 228836 228677 228681
1~373
50581R 2718R 228837 200358C 223839
19321 19321 19321 19321 19321 19321 19321 19321 19321 19321 19321 19321
FOOT LIFTER TREADLE FOR FASTENING TO FLOOR
Foot Lifter Lever Chain, 48 in. long, with two 20278~
Foot Lifter Lever Chain Hook Foot Lifter Treadle
Foot Lifter Treadle 228835 with 2718R, 1~373 and 50581R Foot Lifter Treadle Bracket with 200358C
Foot Lifter Treadle Bracket 228677 with two wood screws 1 in., No. 14, F. H. B.
Foot Lifter Treadle Extension
Foot Lifter Treadle Extension Screw
Foot Lifter Treadle Extension Screw Washer Foot Lifter Treadle Shaft
Foot Lifter Treadle Shaft Set Screw
Foot Lifter Treadle {for fastening to floor) complete, Nos. 227779, 228836, 228837 and two 228681
(Other Foot Lifter Parts are listed with Parts of Machine Head)
No.
228764 228766 150203 228767 201254C 228768 228769 228770 228774 228776
264291
264295
264298
Plate 13537 13537 13537 13537 13537 13537 13537 13537 13537 13537
ACCESSORIES THREAD UNWINDER
(FOR TWO SPOOLS) Name Thread Unwinder Spool Pin
Thread Unwinder Spoo 1 Rest with 20 1254C Thread Unwinder Spool Rest Cushion (felt) Thread Unwinder Spool Rest Rod
Thread Unwinder Spool Rest Set Screw Thread Unwinder Spool Stand
Thread Unwinder Thread Guide
Thread Unwinder Thread Guide Holder Thread Unwinder Thread Guide Rod
Thread Unwinder (for two spools) complete, Nos.
228766 to 228768, 228770, 228774, two each 150203, 228764, 228769 and three wood screws 7/8 in., No.
12
FEED DOGS
19318 Feed Dog, for 264298
ROLLER PRESSER AND BAR COMPLETES
193 06 Roller Presser and Bar complete, Nos. 200096D, 200 117F, 202558, 20 2559, 204 7 3 2, 23 3 807, 23 5088, 241922 and two 200141 F
THROAT PLATES
19318 Throat Plate, 35 elongated needle hole, for needle sizes 24 and 25,for 264291
13
..
No.
60913 60914 27739 225390
MISC~LLAN~OUS PARTS
USED IN CONJUNCTION WITl-1 Tl-IREAD UNWINDER
USED IN CONJUNCTION WITH THREAD UNWINDER Plate
13537 13537 13537 13537
Name
Thread Unwinder Spool Weight with 60914 Thread Unwinder Spool Weight Center Pin Thread Unwinder Thread Cone (wood) Thread Unwinder Thread Cone Holder
