• Nenhum resultado encontrado

Singer 69-5

N/A
N/A
Protected

Academic year: 2023

Share "Singer 69-5"

Copied!
57
0
0

Texto

(1)

Singer 69-5

Singer 69-6

Singer 69-7

Singer 69-8

Singer 69-9

Singer 69-10

Singer 69-11

Singer 69-12

Singer 69-12

Singer 69-14

Singer 69-15

Singer 69-16

Singer 69-17

Singer 69-18

Singer 69-26

(2)
(3)

~ · ".; ~- r · · \i

. , ; ; oJ.' 'B«1··"Mh1n• Jo,t!i§UW

s ... 'U'IIaoh1n• :No.6~ ~tb taut

. ..ro.u..t.a& ...._, ... ,_ .;<

0

?. 3 'i'

j!tl···zvt•

11712

17898

(4)

.... _·;.: _,,""""'":

...,.11 ! ' '" .·~- ~·

- j j l

. "

OILING

To ensure easy running and prevent unnecessary wear of

the parts which are in movable contact, the machine requires oiling and when in continuous use, "TYPE 8" or "TYPE D" OIL, sold by Singer Sewing Machine Company, should be applied at least twice each day to all oil holes marked

"OIL", as instructed in Form 8396.

11

TYPE D" OIL should be used when an oil is desired which will produce a minimum of stain on fabrics, even after a long period of storage.

Copyright, U. S. A., 1940, 1947 and 1955 by The Singer Manufacturing Company

All Righn Reserved for all Countries

r

-r~­

·~·1 !IT •

' .

....

-" , ...

!

' I N D E ·x Page Attachments and Accessories ... 30

Bobbin Winders.---30

Bullon Spacing Gauge•---31

Clamp for Hooks and Eye•---"'---31

Eye and Finger Guard ______________________________________________________ 32 Machine No. 69·5--- 7

Machine No. 69-6.--- _______________ 14 Machine No. 69-7 ______ --- _______ ---15

Machine No. 69-B---16

Machine No. 69-9---17

Machine No. 69-10---18

Machine No. 69-11---19

Machine No. 69-12 ____ --- __

.20

Machine No. 69-13 _____ ---21

Machine No. 69-14---22

Machine No. 69-15---23

Machine No. 69-16 ________________ --- _______ ---.24

Machine No. 69-17---26

Machine No. 69-18---27

Machine No. 69-26 ____________________________________________________________ 28 Numerical Lisl of Part•---35

Slarting Lever and Foot Liller Parl'---32

Slarting Lever Rock Shafls _____________________________ : ____________________ 33 Table Bell Guide---+---~---33

Thread Unwinder---,34

(5)

T r

INSTRUCTIONS FOR ORDERING

In ordering from this list, use ONLY the part NUMBER in the FIRST column.

The number stamped on a Sewing Machine Part is in every case the number of the single part only.

Every combination of parts sent out as such has its specific

number, which, although not stamped on· the parts, must be used when ordering the combination.

Each number always indicates the SAME PART in what- ever list it appears, or for whatever machine.

The letters after some of the numbers indicate the style

of finish only, as follows:

A-Hardened, Polished, Nickel Plated and Buffed A.A-Buffed and Chromium Plated

A.B-Hardened, Polished, Buffed and Chromium Plated A.C-Brown Baking Enamel Finish

A.D-Gray Baking Enamel Finish

A.E-Hardened, Bright Rumbled and Nickel Plated

A.F-Hardened, Bright Rumbled, Nickel Plated, Bright Rumbled

and Chromium Plated

A.G-Aiumilite, Plain

A.H-Aiumilite, Dyed

A.J-Polished, Nickel Plated and Chromium Plated

A.K-Hardened, Polished, Nickel Plated and Chromium Plated A.L-Heat Treated for Toughness

B-Polished, Nickel Plated and Buffed C-Hardened Only

C.R-Hardened and Merlized D-Polished Only

E-Soft, Not Polished F-Hardened and Polished

F.J-Hardened, Polished and Nickel Plated G-Bright Rumbled and Nickel Plated H-Biued

J-Nickel Plated Only K-Hardened and Nickel Plated L-Brass Plated

M-Oxidized N-Japanned, Dull P-Japanned, Bright P.P-Wrinkle Finish

R-Merlized S-Cadmium Plated T -Copper Plated

T.A-Hardened, Polished, Copper and Nickel Plated and Buffed T.B-Copper and Nickel Plated and Polished

T.J-Copper and Nickel Plated Only T.K-Hardened, Copper and Nickel Plated T.L-Copper and Brass Plated

T.M-Copper Plated and Oxidized

. . - - - -

- - - -

I

.'f !: '~-

. I . '·

,_

..

• •·

,.

INSTRUCTIONS FOR ORDERING-Continued

U-Zinc Plated

¥-Silver Plated

W-Polished and Nickel Plated X-Biack Oxide, for Iron and Steel

X.C-Hardened and Black Oxide, for Iron or Steel

Y-Biack Nickel Plated Only

Z-Chromium Plated

Z.A-Hardened, Polished, Nickel Plated, Buffed and Chromium Plated

Z.B-Polished, Nickel Plated, Buffed and Chromium Plated Z.C-Hardened and Chromium Plated

Z.D-Polished and Chromium Plated

Z.G-Bright Rumbled, Nickel Plated, Bright Rumbled and Chromium Plated •

Zj-Nickel and Chromium Plated Z.T-Copper and Chromium Plated

These letters MUST BE USED when they appear in the

list; and AFTER the number as in the list.

In this series:

1 to 1500, 50oor to 51500 and 140001 to 142000 are

Screw Numbers'·

1501 to 1800 and 51501 to 51800 are Nut Numbers 1801 to 2000 and.51801"to 52000 are Roller Numbers 2001 to 50000 and 52001 to 140000 and 142001 to 190000 are Sewing Machine Parts, 190001 and upward

are nombers of Electrical Parts.

The figures in the second colomn refer only to the plates,

illustrating the parts, and are NOT TO BE USED in ordering.

Parts marke.d with an asterisk (*) are furnished only when repairs are made at factory.

SINGER Needles should be used in SINGER Machines

These Needles and their Containers

are marked with the

Company's Trade Mark •• SIMA N C 0. **'"

1

Needles in Containers marked

'"FOR SINGER MACHINES'"

are NOT SINGER made needles.

2

(6)

SINCER Needles should be used in SINCER Machines These Needles and their Containers

are marked with the

Company's Trade Mark "SIMANCO.'•"

1

Needles in Containers marked

"FOR SINGER MACI·UNES"

are NOT SINGER made needles.

2

F ---

.

'

'•

('

,_

l '

'~

A

No,

*55405 4389 4448 BBOE

LIST OF PARTS COMPLETE FOR

MACHINE No. 69-5

FOR SEWING TWO OR FOUR HOLE FLAT BUTTONS OR BAR BUTTONS. MAKES CROSSED STITCHES IN FOUR-HOLE BUT- TONS AND CAN BE ADJUSTED FOR TWO-HOLE AND BAR BUTTONS. MAKES 18 CROSS AND 3 TYING STITCHES.

SPEED UP TO 1000, DEPENDING ON MATERIAl USED AND OPERATIONS PERFORMED.

Plate Name

Arm with 17844 and two 164L Arm Dowel Pin (2) ...

Arm Oil Tube, for intermediate bearing ..

Arm Screw (3) ..

17702

1no3

50333AL 23509 23509 23509 23509 23509 23509 23509 23509 23509 23509 23509 23509 23509 23509 24311 24311 24311 23516 23516 23517 23517 23517 23517 23516

Arm Shaft ..

Arm Shaft Bushing (back) __ _

Arm Shaft Bushing (back) Adjusting Screw __ . Arm Shaft Bushing (back) Adjusting Screw NuL 1520E

124674 190J 18498 39290 184E 17741

217J 39222 63976 140366J

17706 17707 17899 17900 39238 39239 17901

Arm Side Cover ____ _ Arm Side Cover Screw (2) __ ..

Belt Cover ... .

Belt Cover Bracket with 184E and 177 41 ..

Belt Cover Bracket Screw Stud __

Belt Cover Bracket Stud ..

Belt Cover Screw {2) ..

Belt Shifter __ _ Belt Shifter Clamp ..

Belt Shifter Clamp Screw (2)_ ..

Button Clamp (left) with 17723, for 17898 __

BuHon Clamp (right) with 17723, for 17898 ..

Button Clamp (left) with 17723, for 17904 Button Clamp (right) with 17723, for 17904 ..

Button Clamp (left) with 9311 and 17723, for 63928 ....

Button Clomp (right) with 9311 and 17723, for 63928 ..

Button ·clamp Arm with 17714, 23227 and 68799 for 17898 and 17904

7

(7)

8 No.

63927

1n1o

1176X 68799

1175X 1no8

190J 1n12 39241 1n13

nnx

17714 1178X 20437 17716 39242 1n17 50237K

1180X 17718

1182X 17719

1181X 1n2o 1n21 17938 17902 17939 39244 39245 39246 39247 39340 39341 39342 236X 229X 23227

9311 17722 17903 39248 1183X 1n23 17898

1790.4

63928

4292 l45E 375C

P101e 23517 23516 23516 23516 23516 24308 24308 23516 23516 23516 23516 23516 23516 23516 23517 23516 23516 23516 23516 23516 23516 23516 23516 23516 23516 23517 23517 23517 23517 23517 23517

23516 23517.

23516 23517 23516 23517 23517 23516 23516 23516

23517

23517

23509 23509 23509

PARTS FOR MACHINE NO. 69-5 Name

Button Clomp Arm with 17714 and 68799 for 63928 Button Clamp Arm Hinge Plate __

Button Clamp Arm Hinge Plate Screw ... . Button Clamp Arm Hook for 17901 and 63927 (2) Button Clamp Hinge Screw {2) ... .

Button Clamp lifter with 17866 ... .

Button Clamp lifter Screw... ---··----.. --- Buffon Clamp Pressure Spring for 17898 and 17904 ....

Button Clomp Pressure Spring for 63928 ... . Button Clamp Pressure Spring BrockeL ... . Button Clomp Pressure Spring Bracket Screw.

Button Clomp Pressure Spring Guide Block.

Button Clamp Pressure Spring Screw ..

Button Clamp Pressure Spring Screw Washer.

Button Clamp Spreader for 17898 and 17904 ..

Button Clamp Spreader for 63928., ... . Button Clamp Spreader Lever ..

Button Clamp Spreader Lever Hinge Screw ... . Button Clamp Spreader lever Locking Thumb Screw ... . Button Clamp Spreader lever Locking Thumb Screw

Washer ... . Button Clamp Spreader Screw ...

Button Clamp Spreader Spring.. . ... . Button Clamp Spreader Spring Screw ... . Button Clamp Spreader Steady Pin (2) ... . Button Clamp Spring, for flat buttons, for 1789B ..

Button Clamp Spring for stud back buttons, for 17898 ... . Button Clamp Spring, for flat buttons, for 17904 ....

Button Clamp Spring, for stud back buttons, for 17904 ... . Button Clamp Spring, (left) for flat buttons, for 63928 ... . Button Clamp Spring, (right) for flat buttons, for 63928 ... . Button Clamp Spring, (left) for stud back buttons, for

63928.. .... ... . ... ..

Button Clamp Spring (right) for stud back buttons, for 63928... ···

Button Clamp Spring for 39341 ... .

Button Clamp Spring 39340 with 39342, for flat or stud back buttons, for 17904 ... . Button Clamp Spring Plate.. . ... . Button Clamp Spring Screw for 17898 and 17904 ..

Button Clamp Spring Screw for 63928 (2) ..

Button Clamp Spring Steady Pin for 17901 ..

Button Clamp Spring Steady Pin for 39238 and 39239 (2) Button Clamp Stop with two 17720, for 17898 ..

. Button Clamp Stop with two 17720, for 17904 ... . Button Clamp Stop with two 17720, for 63928 ..

Button Clamp Stop Screw ..

Button Clamp Stud (2) ... . Button Clamp (univ_ersal) complete, for 14to 361igne buttons, Nos. 236X, 1180X, 1181X, 1182X, 1183X, 17706, 17707, 17716, 17717, 17718, 17719, 17721 or 17938, 17722, 17901, 50237K and two 1175X ....

Button Clamp (universal) complete, for 26to 46ligne buttons, Nos. 236X, 1180X, 1181X, 1182X, 1183X, 17716, 17717, 17718, 17719, 17899, 17900, 17901, 17902 or 17939, 17903, 50237K and two 1175X Button Clamp (universal) complete, for 10 to 50 ligne

thin buttons, Nos. 1180X, 1181X, 1182X, 1183X, 17717, 17718, 17719, 39238, 39239, 39242, 39244 0~ 39246, 39245 or 39247, 39248, 50237K, 63927 and two each 229X and 1175X ..

Crank Connecting .Rod with 125044 and two 145E ..

Crank Connecting Rod Cap Screw (2) ..

Crank Connecting Rod Hinge Screw ...

·'

,.

No.

1518E 125044 '*55407 18388 1300X 18427 18428 18444 4604 18379 217J 17724 63736 17725 1640 2107

233J 55376 55378 1057AL 1057Al 18356 50598C

1676C 17738 18357 446AL 1952 18358 18359 200C 18360 55381 200C 160E 18362

160E 18363 18364 18395 18415 1442C 1441AL 17797 18384 453AL 18384

1192C 62155 62264 1653C 17800 17923 18365 18366 18367 1221C 55300 17805 1194D 18390

934J Plate 23509 23509 23516 23516 24312 24312 24312 24312 24312 24312 8593 8593 8593 8593 8593 23520 23520 23520 23520 23520 23520 23520 23520 23520 23520 23509 23509 23509 23509 23520 23509 23509 23509 23509 23509 23516 23486 23509 23509 23509 23486 23486 23486 23486 23486 23486 23486 23516 23516 23516 23516 23516 23516 23516 23516 23516 23516 23516

P~TS FOR MACHINE NO. 69-5 Name

Crank Connecting Rod Hinge Screw Nut ...

Crank Connecting Rod Oil Pad (wick) ..

Cylinder Cylinder Block ...

Cylinder Block Screw ...

9

Cylinder End Cover with 18428, 18444 and three 4604 ... . Cylinder End Cover Brack~L ... .

Cylinder End Cover BrackE>t Hinge Pin Cylinder End Cover Bracket Rivet (3) Cylinder End Cover Spring ....

Cylinder End Cover Spring Screw ...

Face Plate ..

Face Plate 17724 with 2105 ...

Face Plate complete, Nos. 448AL, 2107,2127, 56791, 63736 and two 233L... . ... . Face Plate Screw

Face Plate Thread Guard ..

Face Plate Thread Guard Screw ...

Feed Across Connection with four 1057 AL

Feed Across Connection 55376 with 50598C and 55381 ...

Feed Across Connection Cap (lower) Screw (2) ... , .. . Feed Across Connection Cop (upper) Screw (2) ... . Feed Across Regulotor 1952 ...

Feed Across Regulator Ball Screw Stud ..

Feed Across Regulator Ball Screw Stud Nut ..

Feed Across Regulator Ball Screw Stud Nut Washer ...

Feed Across Regulator Hinge Stud ..

Feed Across Regulator Hinge Stud Set Screw (2) ..

Feed Across Regulator Roller and Stud ..

Feed Across Shaft ... . Feed Across Shaft Collar with t·No 200C (2) ..

Feed Across Shaft Collar Set Screw (4) ...

Feed Across Shaft Crank (bock) with 160E and 200C ..

Feed Across Shaft Crank (back) Ball Stud... . ... . Feed Across Shaft Cronk (back) Ball Stud Set Screw .. . Feed Across Shaft Crank (back) Clamping Screw ....

Feed Across Shaft Crank (front) with 160E and 18363 Feed Across Shaft Crank (front) Clamping Screw ... . Feed Across Shaft Crank (front) Stud ....

Feed Across Shaft Crank (front) Stud Slide Block ....

Feed Cam with two each 1192C 17874 and four 190L Feed Cam Driving Worm with 1441 ALand 1442C Feed Cam Driving Worm,Position Screw Feed Cam Driving Worm Set Screw ..

Feed Com Driving Worm Wheel ~ith 453AL Feed Com Driving Worm Wheel 'Pin ..

Feed Com Driving Worm Wheel Set Screw ..

Feed Cam Pin ..

Feed Cam Set Screw (2) ..

Feed Cam Shaft ... .

Feed Cam Shaft 62155 with 1653C and 17797 ...

Feed Cam Shaft Nut ...

Feed Plate (thin) for flat buttons ..

Feed Plate (thick) for round bottom buttons ..

Feed Plate Carrier Bar with 934J, 1195E, 1221C, 8505, 17743, 18366, 18390, two 55300 and four 17806 ..

Feed Plate Carrier Bar Block ..

Feed Plate Carrier Bar Block Cover ...

Feed Plate Carrier Bar Block Screw ..

Feed Plate Carrier Bar Block Steady Pin (2).. . ... . Feed Plate Carrier Bar Pivot Block ....

Feed Plate Carrier Bar Pivot Block Screw ..

Feed Plate Carrier Bar Plate ..

Feed Plate Carrier Bar Plate Screw ..

(8)

No.

1654C 17806

1195E 8505 17742 55486 55297 160J 8589 1177E 177«

17743 1953 1655C 37310

1190C 17745

11910 55458 55459 55321 50117AL 18370 18371 217J 18372

190J 7071 17915 17917 17916 39297 1382f 1681C 39298 17919 190J 1.420E 18373 17822 68757

~8758

68759 55468 8589 670E 50029C 68762

1396AL 51140E 51943

1654C 39330

1255J 39331 19793 17825 55460 17826 7298

Plate 23516 23516 23516 23516 23520 23520

23520 23520 23520 23520 23516 23520 23520 23520 23520 23520 23520 24312 24312 24312 24312 23525 23525 23525 23525 23525 23525 23525 23525 23525 23525 23525 23525 23525 23525 23525 23525 23525 23525

23525 23525 23525 23525 23525 23525 23525 23525 23525 23525 23525 23525 23525 24312

24312

Name Feed Plate Nut ... . Feed Plate Position Stud (4) ...

feed Plate Screw Stud ....

Feed Plate Screw Stud Rivet ... .

Feed Regulator with 1953... _____ ... . Feed Regulator Bracket with two each 160J and 446Al Feed Regulator Bracket 55486 with 17742, 17745, 18356

and 18357... . ... . Feed Regulator Bracket Cap Screw {2) ... ---···---- Feed Regulator Brocket Dowel Pin (2) ..

Feed Regulator Bracket Screw (2) ....

Feed Regulator Hinge Stud... . ... . Feed Regulator Post... . ...••

Feed Regulator Rotter and Screw Stud with 1655C and 37310 .. ···.

Feed· Regulator Rotter and Screw Stud NuL ... . Feed Regulator Rotter and Screw Stud Nut Washer Feed Regulator Stop Screw

Feed Regulator SwiveL ..

Feed Regulator Thumb Screw ..

Knife (needle thread) for 55460 ....

Knife (shuttle thread) for 55460 ..

Knife (stationary) for 55461 ... . Knife (stationary) Screw ... . Knife Bar with 18373 and two 17822 .. . Knife Bar Cap... . ... . Knife Bar Cap Screw (2) ... .

Knife Bar Connection with 17917 ... . Knife Bar Connection Screw (2).. . ... . Knife Bar Connection Screw Washer (2) ... . Knife Bar Connection Slide Block ... . Knife Bar Connection Slide Block 17915 with 17916 .. . Knife Bar ConnecticS"n Slide Bloc:k Stud ... . Knife Bar Driving lever with 190J, 1420E, 17919 and

39298 ..

Knife Bar Driving lever Hinge Screw __

Knife Bar Driving lever Hinge Screw Nut ..

Knife Bar Driving lever Lock Stud ....

.Knife Bar Driving Lever lock Stud Spring ..

Knife Bar Driving lever lock Stud Spring Screw ...•....

Knife Bor Driving lever lock Stud Stop Screw ..

Knife Bar Rack ...

Knife Bar Rack Rivet (2) __

Knife Cam· lever Body ...

Knife Cam lever Body 68757 with 1255J, 39330 and 39331.. ... .

Knife Cam lever complete, Nos. 19793 and 68758 ...

Knife Cam lever Bracket with 1396Al..

Knife Cam lever Bracket Dowel Pin ..

Knife Cam lever Bracket Screw (2) ..

Knife Cam lever Hinge Screw ..

Knife Cam lever Hinge Screw Bushing with 51140E ..

Knife Cam lever Hinge Screw Bushing Clamping Screw Knife Cam lever Hinge Screw Bushing Position Screw.

Knife Cam lever Roller and Screw Stud with 1654C ...

Knife Com lever Roller and Screw Stud NuL Knife Cam lever Slide with 51943 ....

Knife Cam lever Slide Screw ...

Knife Cam lever Slide Screw Washer.

Knife Cam lever Slide Steady Pin_ ..

Knife Holder with 17826, 17830 ond two 7298 .. _ Knife Holder 17825 with 1198C, 17829,55458 and 55459 Knife Holder Pinion._

Kni.fe Holder Pinion Dowel Pin (2).

(,-

No.

17827 178!8 50018F

1698E 1198C 17829 17830 17831 39203 68768 377C 1518E 68769

1258Al 39350 39351 335J 1196Al 39352 17834 17835 1200D 39276

1329J 17837 17838 1651E 17839

196AL 17840

190J.

237Al 6022 55278 55452 55453 1513J 4784 18385 18386 18387 2049 237AL 15170

226J 12424

1035C 1519E 15171

2058 17841 196AL 17842

453Al 11843 17844 164E 1201C 17845 39408

Plate 24312 24312 24312 24312 24312 24312 24312 24308 24308 24308 24308 24308 24308 23525 23525 23525 23525 23525 24308 24308 24308 24308 24308 23525 23525 23525 23525 23525 23525 23525 24308 23509 23509 23509 23509 23509 23509

23509 23509 23509 23509 23509 23509 23509

24308 24308 24308 24308 24308 23525 23525 23525 23525 23525

PARTS FOR MACHINE NO. 69-5 II

Name

Knife Holder Pinion Stud.. . ... . Knife Holder Pinion Stud Bracket with 17827 ... . Knife Holder Pinion Stud Bracket Screw __

Knife Holder Pinion Stud Bracket Screw Nut ...

Knife Screw ... . Knife Thread Holder ... .

Knife Thread Holder Position Pin ...

Needle Bar with 237 Al

Needle Bar Connecting link ... . Needle Bar Connecting link 39203 with 68769 ..

Needle Bar Connecting link Hinge- Screw ... . Needle Bar Connecting link Hinge Screw Nut...

Needle Bar Connecting Stud with 125BAL. _____ -···

Needle Bar Connecting Stud Set Screw ..

Needle Bar Thread Nipper Driving lever (adjustable) with 39351 and two 335L ... . Needle- Bqr Thread Nipper Driving lever Extension ... . Needle Bar Thread Nipper Driving lever Extension

Screw (2).... . ... .

Needle Bar Thread Nipper Driving lever Hinge Screw .. . Needle Bar Thread Nipper Driving lever Spring ...

Needle Bar Thread Nipper lever with 17B35 Needle Bar Thread Nipper lever Bushing ...

Needle Bar Thread Nipper lever Hinge Screw Needle Bar Thread Nipper lever Spring ..

Needle Bar Thread Nipper lever Spring Screw Needle Bar Thread Nipper Rod ... .

Needle Bar Thread Nipper Rod Adjusting Stud ...

Needle Bar Thread Nipper Rod Adjusting Stud Lock NuL. ..

Needle Bar Threcld Nipper Rod Arm with 196AL Needle Bar Thread Nipper Rod Arm Set Screw ... . Needle Bar Thread Nipper Rod Support_

Needle Bar Thread Nipper Rod Support Screw (2) Needle Set Screw .. _

Oscillating Rock Shaft with 47B4.. ··---···-··

Oscillating Rock Shaft complete, Nos. 6022 and 55453 ...

Oscillating Rock Shaft Hinge Pin ..

Oscillating Rock Shaft Hinge Pin 55452 with 1513J.

Oscillating Rock Shaft Hinge Pin NuL. . Oscillating Rock Shaft Oil Pad ..

Oscillating Shaft....

Oscillating Shaft Crank ....

Oscillating Shaft Crank complete, Nos. 237 AL, 1519E, 15171 and 183B6 ....

Oscillating Shaft Crank Pin ....

Oscillating Shaft Crank Set Screw ..

Oscillating Shaft Cronk Slide Block ..

Oscillating Shaft Crank Slide Block Cap Screw ..

Oscillating Shaft Crank Slide Block Cap Screw Washer..

Oscillating Shaft Crank Slide Block Screw Stud ....

Oscillating Shaft Crank Slide Block Screw Stud Nut ..

Oscillating Shaft Crank Slide- Block complete, Nos. 226J, 1035C, 12424 and 15170 ..

Presser Bar ..

Presser Bar Collar with two 196AL Presser Bar Collar Set Screw (2) ...

Presser Bar Guide Bracket with 453AL Presser Bar Guide Bracket Set Screw ..

Presser Bar Lifting lever ..

Presser Bar lifting lever Bracket . Presser Bar lifting Lever Bracket Screw (2) ...

Presser Bar lifting lever Hinge Screw ..

Presser Bor lifting lever Rod.. . ... . Presser Bar Lifting lever Rod 17B45 with 17B46 .. ..

(9)

12 No.

17846 32675 68784 68785 68827 68786 68787 51387R 2005840 68788 68789 2022 68790 2996 15140 2973 2974 2975 592E 15141 15277 21562 591F 15278 21561 68752 2049 462AL 18411 21623

662AL 2523 18429 55439 12890 18430

171Al 17853

1262C 1662C 17886 17854 17855 55487 55488 55489 55285 39346 55304

18493 16532 1343E 1204E 17859

Plote 23525 24308 23509

23509 23509 23509 23509 23509 23509

24312 24312 24312 24312 24312 24312 24312 24312 24312 24312 24312 24312 23509 23509 23509 24312 24312 24312 24312 24312 24312 24312 24312 24312 24311 24311 24311 24311 23509 24311 24311

24311

24311 24311 24311 24311 24311

PARTS FOR MACHINE NO. 69-5 Nome

Presser Bar Lifting lever Rod Chain. ···---·

Presser Bar Spring ... . Pulley (loose) 2 3/4 in. diam .. . Pulley (loose) 68784 with 68786 ..

Pulley (loose) 68785 with 68787 (for Agents only) ... . Pulley (loose) Ball Bearing... ---·

Pulley (loose) Spacing Collar .. ---··

Pulley (loose) Cop Screw... -···---··

Pulley (loose) Oil Plug Screw ... . Pulley (tight) 2 7/8 in, diam .. ··--- Pulley (tight) 68788 with 1206C and 17854 .. ----··---·

Pulley (tight} Pin ..

Pulleys (ball bearing) complete, Nos. 51387R, 68785, 68787 and 68789. ---··--- Shuttle Bobbin.. ··--- Shuttle Bobbin Case Latch._

Shuttle Bobbin Case Latch Lever.. _____ --·---·-···

Shuttle Bobbin Case Latch Lever Fulcrum Pin. -·--···--- Shuttle Bobbin Case Latch Spring.. --- ...

Shuttle Bobbin Case Latch Stop Screw ....

Shuttle Bobbin Case Hinge, Nos. 2973,2974 and 151.40 ...

Shuttle Bobbin Case complete, Nos. 591F, 592E, 2975, 15141 and 15278.... --- ---

Shuttle Body ... ..

Shuttle Tens ion Regulating Screw ... _

Shuttle Tension Spring ... ..

Shuttle, 1 11/16 in, diom., Nos. 2996, 15277 and 21562 ... ..

Shuttle Driver with two 462AL Shuttle Driver Pin ...

Shuttle Driver Set Screw (2) ..

Shuttle Race Body ..

Shuttle Race Cap ...

Shuttle Race Cap Screw.. .. ... ..

Shuttle Race Cap Steady Pin.... ---·-- Shuttle Race Ring... . .. ---

Shuttle Race Ring Spring (2) ... ..

Shuttle Race Ring Spring Screw (2).. . ... . Shuttle Race (flexible) complete, Nos, 662AL, 2·523,

18411, 18429,21623 and two each 12890 and 55439 .. ..

Shuttle Race Screw (2).. ---·--- ... . Starting Lever... . ... . Starting Lever Hinge Screw __ ... ---··----····

Starting Lever Hinge Screw Nut--- ---···

Starting Lever Pitman__ --- ... ..

Stop Cam... ---·---·--- ... - Stop Cam Interlocking Rod... . ... . Stop Cam Interlocking Rod Case ... ..

Stop Cam Interlocking Rod Case 55487 with 18443 and two 193J... .. ... . Stop Cam Interlocking Rod Case -65488 with 63976

and two 140366J... ---··

Stop Cam Interlocking Rod Case 55489 with 1318J, 17855, 17863, 17864, 39222 and 68739 ... ..

Stop Cam Interlocking Rod Case Bracket.. ... . Stop Cam Interlocking Rod Case Bracket complete,

Nos. 1182J, 1196AL, 1204E, 1254C, 1262C, 1508E, 1662C, 17853,17859,17861,17862,17873,39346, 55285, 68820 and two 89BJ.

Stop Cam Interlocking Rod Case Bracket 55304 with 39343, 39344 and two 1186E.. ··-··---·--··---·--·

Stop Cam Interlocking Rod Case Bracket Dowel Pin ... ..

Stop Cam Interlocking Rod Case Brocket Screw (2) ... . Stop Cam Interlocking Rod Case Hinge Screw ..

Stop Cam Interlocking Rod c.ase Socket Joint.. _

No.

• 898J 39343 50682C

1520E 39344

1186E 17861

1254C 1508E 17862 18443 193J 17863 17864 1318J 68739

3012 1206C 2102 1560C

600C 16202

448AL 2103 2105 56791 18392 3012 446AL 18393 68775 140414C

1822 2124 2127 233J 17865

12070 17866 17867 641C 17868

337J 17869 55324 55327 55325

·1208J 55461

691AL 68820

1196AL 68818 17873 1182J 68819

190J 17874

190J

PAR,TS FOR MACHINE NO. 69-5 13

Plate 24311 24311 24311 24311 24311 24311 24311 24311 24311 24311 24311 24311 24311 24311 24311 24311 23509 23509 8593 8593 8593 8593 8593 8593 8593 23509 23509 23509 23509 23509 23509 8593 8593 8593 24308 24308 24308 24308 24308 24308 24308 24308 24312 24312 24312 24312 24312

24311 24311 24311 24311 24311 24311 23486 23486

Name

Stop Cam Interlocking Rod Case Socket Joint Cap Screw (2) Stop Cam Interlocking Rod Case Spring (flat) ... ..

Stop Cam Interlocking Rod Case Spring Adjusting Screw .... . Stop Cam Interlocking Rod Case Spring Adjusting Screw

Nut... ---. .. ... . Stop Cam Interlocking Rod Case Spring Bracket with 1 520E

and 50682C ...

Stop Cam Interlocking Rod Case Spring Bracket Screw (2) ..

Stop Cam Interlocking Rod Case Stop Stud ... ..

Stop Cam Interlocking Rod Case Stop Stud Screw Bushing __

Stop Cam Interlocking Rod Case Stop Stud Screw Bushing Lock Nut._ --- ... . Stop Cam Interlocking Rod Case Stop Stud Spring Stop Cam Interlocking Rod Case Wearing Block..

Stop Cam Interlocking Rod Case Wearing Block Screw (2) ..

Stop Cam Interlocking Rod Spring ...

Stop Cam Interlocking Rod Stop Stop Cam Interlocking Rod Stop Screw ______ _ Stop Cam Interlocking Rod Stop Screw Washer..

Stop Cam Pin.. _______ ---·-·---·

Stop Cam Screw... .. ... ..

Tension Disc (2)

Tension Regulating Thumb Nut... . ... . Tension Screw Stud ---·- ... . Tension Screw Stud 600C with 1560C.... . ... ..

Tension Screw Stud Set Screw... . ... . Tension Spring... . ... ..

Tension Thread Guard ... ..

Tension complete, Nos. 2103,2124, 16202 and two 2102 .. ..

Thread Take-up Cam with 446AL ... ..

Thread Take-up Cam Pin ..

Thread Take-up Cam Set Screw ...

Thread Take-up Lever with 1822

Thread Take--up Lever 18393 with 140414C ....

Thread Take-up Lever Hinge Screw ..

Thread Take--up Lever Roller and Stud... . ... . Thread Take-up Spring ... ..

Thread Take-up Spring Regulator Plate __

Thread Take-up Spring Regulator Plate Adjusting Screw ...

Thread Wiper Body.

Thread Wiper Body Hinge Screw

Thread Wiper Body Hook... ... ··--- Thread Wiper Body Support

Thread Wiper Body Support Set Screw ..

Thread Wiper Body Wire ....

Thread Wiper Body Wire Screw ..

Thread Wiper Body Wire Screw Washer ...

Throat Plate ...

Throat Plate 55324 with 55325 and two 1208L Throat Plate Needle Hole Bushing (large needle hole) ..

Throat Plate Needle Hole Bushing Screw (2) ..

Throat Plate complete, Nos. 1698E, 17828, 50018F, 50117AL, 55321, 55327 and 55460

Throat Plate Screw (4)____ ... ..

Trip Lever {adjustable) complete, Nos. 190J, 68818 and 68819 .. _ --- ... ..

Trip Lever Hinge Screw.

Trip Lever Releaser ...

Trip Lever Spring ...

Trip Lever Spring Screw __

Trip Lever Tripper.. ... ---··

Trip Lever Tripper Adjusting Screw ..

Tripping Point (2) ..

Tripping Point Screw (4) ..

(10)

14

No.

18396 55328 55326 55462

MACHINE No. 69-6

FOR SEWING ON SMALL BUTTONS ONLY. FOR SHIRTS, WAISTS, UNDERWEAR, ETC. MAKES CROSSED STITCHES IN FOUR HOLE BUTTONS AND CAN BE ADJUSTED FOR TWO HOLE AND BAR BUTTONS; 11 CROSS AND 3 TYING STITCHES.

This machine is the same as the 69-5 Machine, with the following exceptions:

Plate

24313 24313

Name

Feed Cam with two 1192C, three 17874 and six 190J, in place of 18395 ... .

Throat Plate 55324 with 55326 and two 1208J, in place of 5532L ~~~~~~~ ~~ ~~ ~~~~~~~~~~~~~~~~~~~~~~

Throat Plate Needle Hole Bushing (small needle hole) in place of 55325.. . ... . Throat Plate complete, Nos. 1698E, 17828, 50018F,

50117AL, 55321,55328 and 55460, in place of 55461

No.

63811 17992 63812 39333 39336

129X 39334

1300X 50048X 1654C 17958

9330 1178X 39335 18490

18397 39231 39304 55335 55334 55464

MACHINE No. 69-7

FOR SHOE TACKING. MAKES A TACK UP TO 3/8" LONG;

2 STAYING, 9 LONG, 7 CROSS IN CENTER OF TACK AND 3 TYING STITCHES.

This machine is the ,same as the 69-5 Machine, with the following exceptions:

Plate 8615 8615 8615 8615

Name

Clamp Arm (lower) with two 17992 ... . Clamp Arm (lower) Hook (2)

Clamp Arm (upper) ..

Clamp Arm Bracket ... .

Clamp Arm Bracket (adjustable) complete, Nos. 129X, 1178X, 1300X, 1654C, 39333,39334,39335 and 50048X, in place of 17713

Clamp Arm Bracket Adjusting Screw ..

Clamp Arm Bracket Hinge Block ....

8615 8615 8615 8615 8615 24309 8615 8615 8615 8615

Clamp Arm Bracket Hinge Block Screw, in place of 11770 ..

Clamp Arm Bracket Hinge Screw (eccentric)

23510 8615

2431.4 2431.4

Clamp Arm Bracket Hinge Screw Nut Clamp Arm lifter with 17866, in place of 17708 ..

Clamp Arm Pin .... . Clamp Arm Screw ... . Clamp Arm Screw Plate-...

Clamp complete, Nos. 1654C, 9330, 18365, 18367, 39304,39336,63811 and 63812, in place of 17898, 17904 and 63928 ...

Feed Cam with 17874 and two each 190J and 1192C, in place of 18395

Feed Cam Driving Worm with 1441AL and 1442C, in place of 18415

Feed Plate, in place of 17800 and 17923 ...

Throat Plate 55324 with 55334 and two 1208J, in place of 55327 ..

Throat Plate Needle Hole Bushing, in plac& of 55325 ... . Throat Plate complete, Nos. 1698E, 17828, 50018F,

50117AL, 55321,55335 and 55460, in place of 55461 ....

(11)

16

No.

17964 17965 17958 17959 17966 217X 39302 17967 1175X

217X .17968

14079

nnx

18449

*55406 55379 18421 55382 18407 I i

17970

I

18448

t

- - - -

MACHINE No. 69-8

FOR BARRING POCKETS ON CLOTHING AND OTHER GENERAL BARRING AND TACKING OPERATIONS. MAKES A BAR 5/16" TO 5/8" LONG, 12 STAYING, 27 COVERING AND 3 TYING STITCHES.

This Machine is the same as the 69-5 Machine, with the following exceptions:

Plate 8616 8616 24309 8616 8616 8616 8616 8616 8616 8616 8616 8616 8616 8616

23511 23521 23507 8616 8616

Name Arch Clamp foot (left) with 17959 ..

Arch Clamp Foot (right) with 17959 ... ---···--- Arch Clamp Foot lifter with 17866, in place of 17708 ..

Arch Clomp Foot lifting Stud {2) ... ----·--- Arch Ctamp Foot Plate .. ···---

Arch Clamp Foot Plate Screw (4) __ . Arch Clamp Foot Spring ... ---···

Arch Clamp Foot Spring Connection ... . Arch Clamp Foot Spring Connection Hinge Screw (2) .. . Arch Clamp Foot Spring Screw ... .

Arch Clamp Frame ..

Arch Clamp Frame Dowel Pin (2) ..

Arch Clamp Frame Screw (2) ...

Arch Clamp complete, Nos. 1654C, 17964, 17965, 17966, 17967, 17968, 17970, 18367, 18448,39302, two each 1175X, 1177X, 14079andfive217X,in place of 17898, 17904 and 63928 ..

Arm with 17844 and two 164E, in place of 55405 ... . Feed Across Connection 55376 with 50598C and

55382, in place of 55378 ..

Feed Across Shaft Crank (back) with 160E and 200C, in place of 18360 .. · ... - Feed Across Shaft Crank (back) Ball Stud, in

place of 55381..

Feed Cam with 1787 4 and two each 190J and 1192C, in place of 18395 ...

Feed Plate, in place of 17800 and 17923 ... . Feed Plat& Carrier Bar with 934J, 1195E, 1221C, 8505,

17743, 18366,18390, two 55300 and four 17806, in place of 18365 ....

~-

•·

(

·-

'

No.

18431 18432 17958 17959 18433 217X 39302 18434 1175X

217X 18435 1.4079 181X 18436

55379 18421 55382 18399 18459 18438

55328 55326 55462

,.

MACHINE No. 69-9

FOR BARRING IN FINE WORK AND FOR FASTENING BOWS AND OTHER ORNAMENTS UPON SHOES OR GARMENTS.

MAKES A BAR 1/8" TO 1/4" LONG, 7 STAYING, 11 COV- ERING AND 3 TYING STITCHES.

This Machine is the same as the 69-5 Machine, with the following exceptions:

Plate Name

23518 Arch Clamp Foot (left) with 17959.

23518 Arch Clamp Foot (right) with 17959 ... . 24309 Arch Clamp Foot lifter with 17866, in place of 17708 23518 Arch Clamp Foot Lifting Stud (2) ... . 23518 Arch Clamp Foot Plate ... . 23518 Arch Clamp Foot Plate Screw (4) 23518 Arch Clamp Foot Spring ... .

23518 Arch Clamp foot Spring Connection ... . 23518 Arch Clamp Foot Spring Connection Hinge Screw (2) ..

23518 Arch Clamp Foot Spring Screw ... . 17

23518 Arch Clamp Frame... . ... . 23518

23518 23518

23511 23521

2351B 23518

...

24313 24313

Arch Clamp Frame Dowel Pin (2) ... .

Arch Clamp Frame Screw (2) ... . Arch Clamp complete, Nos. 1654C, 18367,18431, 18432, 18433, 18434, 18435, 18438, 18459, 39302, two each 181X, 1175X, 14079 and five 217X. in place of 17898. 17904 and 63928 ... . Feed Across Connection 55376 with 50598C and 55382, in

place of 55378 ... . Feed Across Shaft Crank (back) with 160E

and 200C, in place of 18360 ... . Feed Across Shaft Crank (back) Ball Stud,

in place of 55381 ... . Feed Cam with two each 1192C, 1787 4 and

four 190J, in place of 18395 ... . Feed Plate, in place of 17800 and 17923 .. . Feed Plate Carrier Bar with 934J, 1195E,

1221C, 8505, 17743, 18366, 18390, two

· 55300 and four 17806, in place of 18365 Throat Plate 55324 with 55326 and two

1208J, in place of 55327 ... . Throat Plate Needle Hole Bushing (small

needle hole) in place of 55325 ... . Throat Plate complete, Nos. 1698E, 17828,

50018F, 50117 AL, 55321, 55328 and 55460, in place of 55461 ... .

(12)

18

No.

17976 17977 17978 63781 181X 7401

90F 17979 17980 17981 14008 90F 68738 17958 17982 1n13

11nx

1178X 20437 17983 957F 17984 17985 17986 18-452

18399 17988 17989 17806 18451

55328 55326 55462

~--

--- - - - -

MACHINE No. 69-10

FOR BARRING BUTTONHOLES. FITTED WITH CLAMP FOR CLOSING TOGETHER THE END OF BUTTONHOLE BEFORE BARRING.

This Machine is the same as the 69-5 Machine, with the following exceptions:

Plate 8618 8618 8618

8618 8618 8618 8618 8618 8618 8618 8618 8618 24309 8618 8618 8618 8618 8618 8618 8618 8618 8618 8618

8618 8618 8618 8618

24313 24313

Name

Clamp Arm (lower} left ... ---·---... . Clamp Arm (lower) right ... --- Clamp Arm (lower) Brocket... _______ --- Clamp Arm (lower) Bracket 17978 with 14008 and

17981

Clam'p Arm (lower) Bracket Screw _____ --- Clamp Arm (lower) Bracket Steady Pin (2) __

Clamp Arm (lower) Hinge Screw (2) ..

Clamp Arm (upper) left, with 17986 and 68738 Clamp Arm (upper) right, with 17986 and 68738 __

Clamp Arm (upper) Bracket __

Clamp Arm (upper) Bracket Hinge Pin __

Clamp Arm {upper) Hinge Screw (2)__ ... ___ ---····- Clamp Arm (upper) Hook (2) ..

Clamp Arm (upper) Lifter with 17866, in place of 17708 __ . Clamp Pressure Spring._

Clamp Pressure Spring Bracket Clamp Pressure Spring Bracket Screw __

Clamp Pressure Spring Screw···--····-- Clamp Pressure Spring Screw Washer ..

Clamp Spreader Lever __ --···-···· ... . Clamp Spreader Lever Cap Screw__ ---···

Clamp Spreader Lever Friction Washer---·----·---·

Clamp Spreader Lever Hinge Stud ···-···

Clamp Spreader Stud (2) ..

Clampcample-te,Nos.181X,957F, 1177X, 1178X, ln13, 17976, 17977, 17979, 17980, 17982, 17983,17984,17988, 17989, 18367,18451, 20437,63781, two 7401 and four each 90F and 17806, in place of 17898, 17904 and 63928 ..

Feed Cam with two each 1192C, 17874 and four 190J, in place of 18395.

Feed Plate (left).... . ... . Feed Plate (right) ... . Feed Plate Rivet (4)

Feed Plate Carrier Bar with 934.1, 1221C, 1n43, 17985, 18366, 18390 and two 55300, in place of 18365 ... .

Throat Plate 55324 with 55326 and two 1208J, in place of 55327 __ _

Throat Plate Needle Hole Bushing (small needle hole) in place of 55325

Throat Plate complete, Nos. 1698E, 17828, 50018F, 50117Al, 55321,55328 and 55-460, in place of 55461

~~~~----~-~---

No.

17957 39206 17959 17960 217X 39303

217X 1175X 39250 14079 181X 18453

55379 18421 55382

,,

i 18408

• I

17963

18438

l

18426"

·:1 55332

\,

.I

55331 55463

II ,,.

.,

1: r l·,

•'

-~

•>

MACHINE No. 69-11

FOR BARRING. FOR SEWING STRAPS ON UNDERWEAR AND OTHER GARMENTS. MAKES A BAR 3/8" TO 7/8" LONG; 3 STAYING, 36 COVERING AND 3 TYING STITCHES.

This Machine is the same as the 69-5 Machine, with the following exceptions:

Plate 8619 24310 8619 8619 8619 8619 8619 8619 8619 8619 8619 8619

23511 23521

8619 8619

Name

Arch Clamp Foot with 17959 .. ---···---·--···

Arch Clomp Foot Lifter with 17866, in place of 17708 ..

Arch Clamp foot Lifting Stud Arch Clamp Foot Plate .. -- Arch Clamp Foot Plate Screw (4) ..

Arch Clamp Foot Spring ...

Arch Clomp Foot Spring Screw (lower) ..

Arch Clamp Foot Spring Screw (upper) ... -- Arch Clamp Frame ..

Arch Clamp Frame Dowel Pin (2) ..

Arch Clamp Frome Screw (2) ..

Arch Clamp complete, Nos. 1175X, 1654C, 17957, 17960,17963,18367,18438,39250,39303, two each 181X, 14079 and five 217X, in place of 17898, 17904 and 63928 ..

Feed Across Connection 55376 with 50598C and 55382, in place of 55378---···---···

Feed Across Shaft Crank (back) with 160E and 200C, in place of 18360 ... ---···-···-- Feed Across Shaft Crank (back) Ball Stud, in

place of 55381 ... ---···

Feed Cam (double nipper depression) with 17874 and two each 190J and 1192C, in place of 18395 ..

Feed Plate, in place of 17800 and 17923 .. --.-·-···

feed Plate Carrier Bar with 934J, 1195E, 1221C, 8505, 177 43, 18366, 18390, two 55300 and four

19

17806, in place of 18365 ... ---·--···---···-·

Knife Bar with 18373 and two 17822, in place of 18370 __ . Throat Plate 55324 with 55331 and two 1208J, in 24307

24315 2-4315

place of 55327 ... ---·· ···---···---·

Throat Plate Needle Hole Bushing, in place of 55325 Throat Plate complete, Nos. 1698E, 17828, 50018F,

501 17 AL, 55321, 55332 and 55460, in place of 55461 ....

(13)

20

No.

63811 17992 63812 39333 39336

129X 39334

1300X 50048X 1654C 17958

9330 1178X 39335 18490

55380 18421 55383 18402 39211 39212 55419 39304 55335 55334 55464

MACHINE No. 69-12

FOR SHOE TACKING. MAKES A TACK UP TO 3/8" LONG;

2 STAYING, 9 LONG AND 7 CROSS STITCHES.

This Machine is the same as the 69-5 Machine, with the fol- lowing exceptions:

Plate 8615 8615 8615 8615

8615 8615 8615 8615 8615 24309 8615 8615 8615 8615

23512 23522

23512

8615

24314 24314

Name

Clamp Arm (lower) with two 17992 --···--- Clamp Arm (lower) Hook (2) .... .

Clamp Arm (upper) ... . Clamp Arm Bracket ... . Clamp Arm Bracket (adjustable) complete, Nos.

129X. 1178X. 1300X, 1654C, 39333, 39334, 39335 and 50048X, in place of 17713 ..

Clamp Arm Bracket Adiusting Screw ... . Clamp Arm Brac:ket Hinge Block ...

Clamp Arm Bracket Hinge Block Screw, in place of 11770 ...

Clamp Arm Bracket Hinge Screw (eccentric) ..

Clamp Arm Bracket Hinge Screw Nut ... . Clamp Arm lifter with 17866, in place of 17708 .. _ Clamp Arm Pin... ···--- Clamp Arm Screw.. ---····

Clamp Arm Screw Plate···--- Clamp complete, Nos. 1654C, 9330, 18365, 18367,

39304,39336,63811 and 63812, in place of 17898, 17904 and 63928 ..

Feed Across Connection 55376 with 50598C and 55383, in place of 55378

Feed Across Shaft Crank (back) with 160E and 200C, in place of 18360 ..

Feed Across Shaft Crank (back) Ball Stud, in place of 55381... ----·---····--- Feed Cam with two each 1192C, 17874 and four 190J,

in place of 18395 ..

Feed Cam Driving Warm with 1441AL and 1442C, in place of 18415.. ---.

Feed Cam Driving Warm Wheel with 453AL, in place of 17797.____ .... ···---···

Feed Cam Shaft 62155 with 1653C and 39212, in place of 62264.... ···--- Feed Plate, in place of 17800 and 17923 ..

Throat Plate 55324 with 55334 and two 1208J, in place of 55327

Throat Plate Needle Hole· Bushing, in place of 55325 ..

Throat Plate complete, Nos. 1698E, 17828, 50018F, 50117Al, 55321,55335 and 55460, in place of

55461 ---·---

',-

I'

\•

I I

'

i I

I

1,,

I

I I

No.

17999 39333 39336

129X 39334

1300X

50048X 165-4C 39257 17958 1178X 39335 18-491

18403 39258 39362 55328 55326 55462

l

MACHINE No. 69-13

FOR TACKING ORNAMENTS TO SHOES. MAKES 11 CROSS AND 3 TYING STITCHES.

This Machine is the same as the 69-5 Machine, with the fol- lowing exceptions:

Plate Name

21

8620

8620 Clamp Arm with two 39257. ---·---...

8620 8620 8620 8620 8620 8620 24309 8620 8620 8620

8620 8620

24313 24313

Clamp Arm Bracket ... ____ . . ____ .... . Clamp Arm Bracket (adjustable) complete, N~».

129X, 1178X, 1300X, 1654C, 39333, 3933-4, 39335 and 500-48X, in place of 17713.

Clamp Arm 8.-acket Adjusting Screw. _____ _ Clamp Arm Bracket Hinge Block _ _ _ Clamp Arm Bracket Hinge Block Screw, in place of

11770. --- ---

Clamp Arm Bracket Hinge Screw (eccentric) ... ---·-···

Clamp Arm Bracket Hinge Screw Nut ... ..

Clamp Arm Hook (2) ... ..

Clamp Arm tifter with 17866, in place of 17708 Clamp Arm Screw .... ______________________________________ _ Clamp Arm Screw Plate ... . Clamp complete, Nos. 165-4C, 17999, 18365, 18367, 39258 and 39336, in place of 17898, 1790-4 and 63928 ... . Feed Cam with two 1192C, three 1787-4 and six

190J, in place of 18395 ... ···--- Feed Plate (thin) in place of 17800... ··---···

Feed Plate (thick) in place of 17923 ... . Throat Plate 5·532-4 with 5532(i and two 120SJ, in

place of 55327·---··-····---·--··

Throat Plate Needle Hole Bushing (small needle hole) in place of 55325 ... ·---·- Throat Plate complete, Nos. 1698E, 17828, 50018F,

50117 AL, 55321, 55328 and 55-460, in place of 55-461.

(14)

22

MACHINE No. 69-14

FOR TACKING SHOES. FOR LIGHT WORK. MAKES AN OBLONG TACK 7/32" TO 7/16" LONG, 18 STAYING IN TWO PARALLEL LINES AND 3 TYING STITCHES.

This Machine is the same as the 69-5 Machine, with the fol- lowing exceptions:

No.

18473 55384 18475 55385 17958 63726 18477 190J 219XC 63731 63732 63733 1229F 1547J 63734 14079 181X 55386

18404 18484 18486

18487 55298 18488 18489 8100 55328 55326 55462

Plate 8621 8621 24309 8621 8621 8621 8621 8621 8621 8621 8621 8621 8621 8621 8621 8621

8621 8621

23523

8621 8621 8621

24313 24313

Name

Arch Clamp Foot (left) ... . Arch Clamp Foot (left) 18473 with 219XC and 6373L ...•

Arch Clamp Foot (right).. . ... . Arch Clamp Foot (right) 18475 with 219XC and 63732 ... . Arch Clamp Foot Lifter with 17866, in place of 17708 Arch 'clamp Foot lifting Stud (2) ..

Arch Clamp Foot Plate__ _ _____________ --···

Arch Clamp Foot Plate Screw (4) __

Arch Clomp Foot Screw (2) ..

Arch Clomp Foot Shonk (left) with 63726 ..

Arch Clamp Foot Shank (right) with 63726 Arch Clomp Foot Spring (2) __

Arch Clamp Foot Spring Adjusting Screw (2) ..

Arch Clamp Foot Spring Adjusting Screw Lock Nut (2) ...•.

Arch Clamp Frame ... ···- ---···

Arch Clamp Frame Dowel Pin (2) ____ ---··

Arch Clamp Frame Screw (2) ... . Arch Clamp complete, Nos. 1654C, 18367, 18477,

18484, 18486, 55384, 55385, 63734, two each 181X, 1229F, 1547J, 14079,63733 and four 190X, in place of 17898, 17904 and 63928 __

Feed Cam with two each 190J, 1192C and 17874, in place of 18395._

Feed Plate, in place of 17800 and 17923 __

Feed Plate Carrier Bar with 8100, 934J, 1195E, 1221C, 8505, 18366, 18390, 18488, 18489, two 55300 and four 17806, in place of 18365._ ... . Feed Regulator with 1953, in place of 17742 ..

Feed Regulator Brocket 55486 with 177 45, 1 8356, 18357 and 18487, in place of 55297 __

Feed Regulator Post, in place of 17743_ ..

Feed Regulator Post Guide __

Feed Regulator Post Guide Cap Screw ___ _ Throat Plate 55324 with 55326 and two 1208J, in

place of 55327 ..

Throat Plate Needle Hole Bushing (small needle hole) in place of 55325._ ..

Throat Plate complete, Nos. 1698E, 17828, 50018F, 50117AL, 55321,55328 and 55460, in place of 55461 ....

No.

18464 18465 18466 63929

18405 39231 17997 124874 18468 39312 55491 55299 39313

MACHINE No. 69-15

FOR STITCHING LARGE BUTTONS ON CLOTHING. MAKES CROSS STITCHES IN FOUR HOLE BUTTONS AND CAN BE ADJUSTED FOR TWO HOLE AND BAR BUTTONS. NEEDLE THROW 5/32" TO 5/16", 18 CROSS AND 3 TYING STITCHES.

This Machine is the some as the 69-5 Machine, with the fol- lowing exceptions:

Plate 23519 23519 23519 23519

Name

Buffon Clamp (left) with 9311 and 17723, in place of 17706, 17899 and 39238

Button Clamp (right) with 9311 and 17723, in place of 17707, 17900 and 39239 ... . Button Clamp Stop with two 17720, in place of

17722, 17903 and 39248 __ _

Button Clamp (universal) complete, for 26 to 55 lignebuffons, Nos. l180X, 1181X, 1182X, 1183X, 17717, 17718, 17719,18464, 18465, 18466,39242,39244 or 39246,39245 or 39247, 50237XC, 63927 and two each 229X and 1175X, in place of 17898, 17904 and 63928 ... .

23510

23519 23524 23524

23524

Feed Cam with 17874 and two each 190J and 1192C, in place of 18395 ... . Feed Cam Driving Worm with 1441AL and 1442(, in

place of 18415.. ... . ... ..

Feed Cam Driving Worm Wheel with 453AL, in place of 17797... ________ .. _ ... . Feed Cam Shaft 62155 with 1653C and 17997, in

place of 62264.. . ... ..

Feed Plate, in place of 17800 and 17923 ..

Feed Regulator with 1953, in place of 17742 ___ _ Feed Regulator Bracket with two each 160J and

446AL, in place of 55486 ..

Feed Regulator Bracket 55491 with 18356,18357, 39312 and 39313, in place of 55297._

Feed Regulator Swivel, in place of 17745 ... .

(15)

24

No.

18.473 5538.4 18475 55385 17958 63726 184n 190X

MACHINE No. 69-16

FOR TACKING SHOES. MAKES AN OBLONG TACK 7/32"

TO 7/16" LONG; 18 STITCHES IN TWO PARALLEl LINES, 3 TYING STITCHES.

This Machine is the some CK the 69-5 Machine, with the fol- lowing exceptions:

Plate 8621 8621 24309 8621 8621 8621

Nome

Arch Clamp Foot (left) ... . Arch Clamp Foot (left) 18473 with 219XC and 63731...

Arch Clamp Foot (right) ... . Arch Clamp Foot (right) 18475 with 219XC and 63732 Arch Clamp Foot lifter with 17866, in place of 17708 __

Arch Ctamp Foot Lifting Stud (2) ... -.---···- Arch Clamp Foot Plate ___________________ _

Arch Clamp Foot Plate Screw (4) __ _ 219XC 8621 Arch Clamp Foot Screw (2).

63731 8621

63732 8621

63733 8621

1229F 8621

1547J 8621

63734 8621

14079 8621

181X 8621

55386 8621

*55436 18406

18484 8621

18486 8621

18487 23523 55298

18488 8621

18489 8621

8100 8621

55397 23498

55398

17808 23498

6023 23513

2073 23498

2211 23498

2212 23498

39295 23498

44001 23498

2076 23498

2078 23498

2080 23498

2082 23498

398E 23498

2084 23498

Arch Clamp Foot Shank (left) with 63726 ..

Arch Clamp Foot Shank (right) with 63726 Arch Clamp Foot Spring (2). ___________________________________ _ Arch Clamp Foot Spring Adjusting Screw (2) ____________ _ Arch Clamp Foot Spring Adjusting Screw Lock Nut (2) Arch Clamp Frame. --···-···

Arch Clamp Frame Dowel Pin (2) __

Arch Clamp Frame Screw (2l---···---···

Arch Clamp complete, Nos. 1654C, 18367, 18477, 18484, 18486, 55384, 55385, 63734, two each 181X, 1229F, 1547J, 14079,63733 and four 190X, in place of 17898, 17904 and 63928 ..

Cylinder, in place of 55407 ________________________________________ ..

Feed Cam with two each 190J, 1192C and 17874, in place of 18395 ... ·-···--···----··---···

Feed Plate, in place of 17800and 17923 ... . Feed Plate Carrier Bar with 810D, 934J, 1 195E,

1221C, 8505,18366,18390,18488,18-489, two 55300 and four 17806, in place of 18365 __ _ Feed Regulator with 1953, in place of 17742 -···-···

Feed Regulator Bracket 55486 with 17745, 18356, 18357 and 18487, in place of 55297 ...

Feed Regulator Post, in place of 177 43.

Feed Regulator Post Guide_. ···-···· _ Feed Regulator Post Guide Cap Screw ....

Knife (needle thread) in place of 55458 ________________ . Knife Holder 17825 with 1198(, 17808, 17829 and

55397, in place of 55460.. ···-····

Knife (shuttle thread) in place of 55459 ..

Oscillating Shaft, in place of 18385 __ _ Shuttle Bobbin, in place of 2996 _________ ... . Shuttle Bobbin Retaining Spring ____ ... .

Shuttle Bobbin Retaining Spring Rivet (2) ... -.--- Shuttle Body with 398E, 2082, 2084, 2211 and two 2212 .. -- Shuttle Cover with 112J, 466H, 2078, 2080, 2086

and 2090 ..

Shuttle Cover Hinge Pin __

Shuttle Delivery Eye Thread Guard ... . Shuttle Delivery Eye Thread Guard Rivet ..

Shuttle Main Spring ... . Shuttle Main Spring Screw ... _ Shuttle Main Spring Steady Pin __

PARTS FOR MACHINE NO. 69·16 25

No. Plate Name

466H 23-498 Shuttle Tension Regulating Screw, in place of 591F __

2086 23498 Shuttle Tension Spring, in place of 15278 .. -- 2090 23498 Shuttle Tension Spring Plate ___ _

112J 23498 Shuttle Tension Spring Screw.. . ... . 39296 23498 Shuttle complete, Nos. 2073, 2076, 39295 and

44001, in place of 21561---·---····

39487 Shuttle Driver with two 457AL, in place of 68752 ....

457AL Shuttle Driver Set Screw, in place of 462AL (2) ..

55437 Shuttle Race Body, iri place of 1841 L 55271'

,--~~~--~5~h~u~H~Ie~R~a~<~e~l~~·~~e~o~f~~

~5-138"1"1' S utt e Race Ring Spring Screw, in place of 1289D (2) ___ _ 55438 23498 Shuttle Race complete, Nos. 55271, 55437 and two

each 513810 and 55439, in place of 18430 ...

51403J 23498 Shuttle Race Screw, in place of 171AL.

39204 23513 Thread Take-up Cam with 446Al, in place of 18392 ....

56756 23513 Thread Take-up Lever with 76C and 1819, in place 76C

1819 55402 55403 55325 55404

23513 23513 23498

23498 23498

of 68775 ... -- ···--- ... . Thread Take-up Lever Hinge Screw, in place of 140414C .. - Thread Take-up Lever Roller and Stud, in place of 1822.-.

Throat Plate, in place of 55324 ..

Throat Plate 55402 with 55325 and two 1208J, in place of 55327__ .. .. ---·- Throat Plate Needle Hole Bushing (large needle hole) __

Throat Plate complete, Nos. 1698E, 17828, 50018F, 50117AL, 55321,55398 and 55403, in place of 55461.-.

(16)

26

No.

55467 39211 39212 55419

MACHINE No. 69-17

FOR STITCHING TWO OR FOUR HOLE GROOVED BUTIONS.

MAKES TWO PARALlEl BARS IN FOUR HOLE BUTIONS WITHOUT CROSS STITCH. CLAMP AUTOMATICALLY BRINGS THE BUTION INTO POSITION FOR THE SECOND BAR; 18 STITCHES, INCLUDING 3 TYING STITCHES TO EACH BAR.

This Machine is the same as the 69-5 Machine, with the fol- lowing exce-ptions:

Plate

23514

Name

Feed Cam with two each 1192C, 1787 4 and four 190J, in place of 18395 ----·-···---···--- Feed Cam Driving Worm with 1441Aland 1442C, in

place of 18415 ... . Feed Cam Driving Worm Wheel with 453AL, in place

of 1n97 ... . Feed Cam Shaft 62155 with 1653C and 39212, in

place of 62264 ... .

No.

55309 39211 39212 55419 55328 55326 55462

MACHINE No. 69-18

FOR STITCHING TWO OR FOUR HOLE GROOVED BUTIONS.

MAKES TWO PARALLEL BARS IN FOUR HOLE BUTIONS WITHOUT CROSS STITCH. CLAMP AUTOMATICALLY BRINGS THE BUTION INTO POSITION FOR THE SECOND BAR; 9 STITCHES INCLUDING 3 TYING STITCHES TO EACH BAR.

This Machine is the same as the 69-5 Machine, with the fol- lowing exceptions:

Plate Name

Feed Cam with two 1192C and four each 190J and 17874, in place of 18395 ... . ... . 23514 Feed Cam Driving Worm with 1441AL and 1442C, in

27

place of 18415 ... .

24313 24313

Feed Cam Driving Worm Wheel with 453AL, in place of 17797.. . ... . Feed Cam Shaft 62155 with 1653C and 39212, in

place of 62264.. ... . ... . Throat Plate 55324 with 55326 and two 1208J, in

place of 55327.. ···-·--·-··· ... . Throat Plate Needle Hole Bushing (small needle

hole) in place of 55325 ... _______________ _ Throat Plate complete, Nos. 1698E, 17828, 50018F,

50117AL, 55321,55328 and 55460, in place of 5546L

(17)

28

No.

17964 17965 17958 17959 17966 217)(

39302 17967 1175X

217X 17968 14079 1177X 18449

55406 55379 18421 55382 55454 124925

·-

- - - , - - - -

MACHINE No. 69-26

FOR BARRING POCKETS ON CLOTHING AND OTHER GEN- ERAL BARRING AND TACKING OPERATIONS. MAKES-A BAR 5/16" TO 5/8" LONG, 8 STAYING, 17 COVERING AND 3 TYING STITCHES.

This Machine is the same as the 69-5 Machine, with the fol- lowing exceptions:

Plate 8616 8616 24309 8616 8616 8616 8616 8616 8616 8616 8616 8616 8616 8616

23515 23521 23508 23515

Name Arch Clamp Foot (left) with 17959 Arch Clamp Foot (right) with 17959 __

Arch Clamp Foot Lifter with 17866, in place of 17708 __

Arch Clamp Foot lifting Stud (2).. . ... . Arch Clamp Foot Plate ... . Arch Clamp Foot Plate Screw (4) ... . Arch Clomp Foot Spring ..

Arch Clamp Foot Spring Connection __

Arch Clamp Foot Spring Connection Hinge Screw (2) ..

Arch Clamp foot Spring Screw ... ····--- Arch Clamp frame ... .

Arch Clamp Frame Dowel Pin (2) __

Arch Clamp Frame Screw (2) __

Arch Clamp complete, Nos. 1654C, 17964, 17965, 17966, 17967, 17968, 17970, 18367, 18448, 39302, two each 1 175X, 1 177X, 14079 and five 217X, in place of 17898, 17904 and 63928 ... . Arm with 17844 and two 164E, in place of 55405 ... . Feed Across Connection 55376 with 50598C and

55382, in place of 55378._

Feed Across Shaft Crank (back) with 160E and 200C, in place of 18360 ..

Feed Across Shaft Crank (back) Ball Stud, in place of 55381.. ...

Feed Cam (double nipper depression) with 17874 and two each 190J and 1192C, in place of 18395 ..

Feed Cam Driving Worm with 1441Al and 1442C, in place of 18415.... . ... .

No. Pl<rte

124926 23508

124927

17970 8616

18448 8616

55328

55326 24313

55462 24313

PAR~S FOR MACHINE NO. 69-26 Name

feed Cam Driving Worm Wheel with 453AL, in place of 17797 ... _ -·----·-

·Feed Cam Shaft 62155 with 1653C and 124926, in place of 62264 ... ____ ... . feed Plate, in place of 17800 and 17923 ... . feed Plate Carrier Bar with 934J, 1195E, 1221C, 8505, 17743, 18366,18390, two 55300 and four 17806, in place of 18365 ... . Throat Plate 55324 with 55326 and two 1208J, in

place of 55327... . ....

Throat Plate Needle Hole Bushing (small needle hole) in place of 55325 .. ----·-···

29

Throat Plate complete, Nos. 1698E, 17828, 50018F, 50117At, 55321,55328 and 55460, in place of 55461 ....

(18)

No.

59797 18419 18420 18423 453"L 18424

134E 41400 120346 120347 11831 26026 26485 10875 27662 17905 22003

No.

41598 1186C 15072 126391 129E 27916 28084 27321 50356D

1620J 41825 41600 155C 27538 27850 41828 27328 350 60769 60770 9780 161J 2455 1562J

419E 43808

8422 41604 41716

ATTACHMENTS AND ACCESSORIES

Plate 23505 8599 8599 8599 8599 8599

8599 8599 8599 8599 8599 8599 8599 8599 8599 8599 8599

Name

Button Tray with two wood screws 1 1 /4 in. No. 14, for 69-5, 69-6, 69-15, 69-17 and 69-18 Machines __ _ Cylinder Base Plate with two 453AL_ .

Cylinder Base Plate Hinge Connection (2) __ _

Cylinder Base Plate Hinge Connection Hinge Pin {2) ...•

Cylinder Base Plate Hinge Connection Hinge Pin Set Screw (2) ... -· ... . Cylinder Base Plate (hinged) complete, Nos.

18419, two each 18420, 18423, three wood screws 11/4 in. No. 12 and four 134E ...

Cylinder Base Plate Screw (.4) ..

Machine Rest Pin (wood) ...

Oiler (copper plated) with 120347 Oiler Spout, 8 1/2 in. long .. _ Screw Driver (large) ..

Screw Driver (machine) __

Screw Driver (shuttle tension) ..

Wrench for 1518 and 1520 ..

Wrench for 1508 ... _ Wrench for 1654 and 1676 .. . Wrench for 165L ... .

BOBBIN WINDERS Bobbin Winder

(swinging automatic, left hand) for 2996

for Nos. 69-5 to 69-15,69-17,69-18 and 69-26 Machines Plate

23502 23502 23502 23502 23502 23502 23502 23502 23502 23502 23502 23502 23502 23502 23502 23502 23502 23502 23502 23502 23502 23502 23502 23502 23502 23502 23502

23502

Name Base with 27916 and two 28084 ..

Bose Screw (2) ..

Bobbin Position Pin .. _ Bracket..

Bracket Screw (2) ..

Brake (leather) ....

Brake Rivet (2)_

Frame ....

Frome Hinge Screw ___ _ Frame Hinge Screw Nut ..

Frame Spring ..

Pulley with 155C. .. . Pulley Set Screw .. .

Spindle with 15072,27850 and 41828 ..

Spindle Collar ...

Spindle Collar Pin __

Stop Latch.. . ... - Stop Latch Hinge Screw ..

Tension Bracket.. . ... .

Tension Brocket complete, Nos. 419E, 1562J, 8422, 9780, 43808, 60769 and two 2455 ..

Tension Bracket Position Stud ..

Tension Bracket Screw ..

Tension Disc (2) ..

Tension Regulating Thumb Nut . Tension Screw Stud ___ _ Tension Spring ..

Tension Thread Guide ...

Bobbin Winder, Nos. 350, 1620J, 27321, 27328, 27538, 41598, 41600, 41825 and 503560 ...

Bobbin Winder (swinging automatic, left hand) complete, Nos. 161J, 41604,60770 and two 1186(._

'

No.

27305 27326 41713 41714

No.

124705 181J 124701

602J 124706 124707

124950 124706 124951 181J 9525

217J 7071 124952

No.

17906 17907 17908 68799 1175X 17911

1208X 17712 17714 1219X 1657X 17718 17909 1182X 17910

1208X 23219 17912

Bobbin Winder

(swinging automatic, left hand) for No. 2073, for No. 69-16 Machine This Bobbin Winder is the same as the No. 41716,

with the following exceptions:

Plate 23503 23503

23503

Nome Spindle, in place of 27538 ....

Stop Latch, in place of 27328

Bobbin Winder, Nos. 350, 1620J, 27305, 27321, 27326, 41598,41600,41825 and 503560, in place of 41604 ..

Bobbin Winder (swinging automatic, left hand) complete, Nos. 161J, 41713,60770 and two 1186C ... .

BUTTON SPACING GAUGES

For Nos. 69-5, 69-6, 69-15, 69-17 and 69-18 Machines Plate

24316 24316 24316 24316 24316 24316

24316 24316 24316 24316 24316 24316 24316 24316

Name Button Spacing Gauge (lower)_

Button Spacing Gauge (lower) Screw ..

Button Spacing Gauge (upper) ..

Button Spacing Gauge (upper) Screw __ _ Button Spacing Gauge Holder ...

Button Spacing Gauge complete, without cloth plate, Nos. 181J, 602J, 124701, 124705, 124706 and two wood screws 1 in. No. 10 R.H.B ...

Button Spacing Gauge Button Spacing Gouge Holder __

Button Spacing Gauge Plate ..

Button Spacing Gauge Plate Screw __

Button Spacing Gauge Plate Screw Washer ..

Button Spacing Gauge Screw (2).. . ... . Button Spacing Gauge Screw Washer {2) ... . Button Spacing Gauge complete, without cloth plate, Nos. 181J, 9525,124706, 124950, 124951 and two each 217J, 7071 and wood screws 1 in. No. 10 R.H.

CLAMP FOR HOOKS AND EYES

Plate 24316 24316 24316 24316 24316 24316 24316 24316 24316 24316 24316 24316 24316 24316 24316 24316 24316

for Nos. 69-5 and 69-6 Machines Name Clamp (left) with 23219 ..

Clomp (right) ..

Clamp Arm with 1nl4 and 68799 ....

Clamp Arm Hook ...

Clamp Hinge Screw (2) ..

Clamp Hook Stop ..

Clamp Hook Stop Screw ....

Clamp Pressure Spring ___ _ Clamp Pressure Spring Guide Block ..

Clamp Spreader Stud ..

Clamp Spreader Stud Thumb Nut ..

Clamp Spreader Stud Thumb Nut Washer..

Clamp Spreader Spring._ ..

Clamp Spreader Spring Screw __ _ Clamp Spring ...

Clamp Spring Screw.. . ... . Clamp Spring Steady Pin.. ---·---·--···

Clamp complete, for hooks and eyes, Nos. 1182X, 1219X, 1657X, Tn18, 17906,17907,17908, 17909, 17910, 1·7911 and two each 1175X and 1208X ....

Imagem

TABLE  BELT  GUIDE
Table  Belt Guide Set Screw for  60811 __
Table Belt Guide PUlley  Shaft (long) Wick for 68777 .·.

Referências

Documentos relacionados

Plug Screw 1 Needle Lever Drive Shaft Bushing 4 Oil Filler Screw Assembly 1 Screw, for oil system 2 Stitch Length Regulator 1 Stitch Length Regulator Return Spring 1 Screw, for