Singer 71-48

Singer 71-48

I r ·,

( ·, .

, \ Form 1542w, Rev•sed li ', (145)

\ ' Printed in U. 5, A.

r , .

~: J~

~l.

I '

! ~

I •

I ^II

j.~'·, ^.

;

_{I ,}

^, ..

_,

'

I '

I I

LIST

OF

PARTS

MACHINE No. ^71-48

* * A TRACE MARK OF

THE SINGER MANUFACTURING COMPANY

INSTRUCTIONS FOR OILING

To ensure easy running and prevent unnecessary wear of' the parts which are in movable contact, the machine requires oiling, and when in continuous use, "TYPE 8" or "TYPE 0" OIL, sold only by Singer Sewing Machine Company, should be applied regularly to all oil holes marked "OIL," as instructed in Form 1543w.

Once a year apply BALL BEARING LUBRICANT, sold only by Singer Sewing Machine Company, to the ball bearing of the loose 'pulley on the machine.

"TYPE D" OIL is stainless.

Copyright, U.S. A., 1937, 1938, 1939, 1942 and 1945 by The Singer Manufacturing Company

All Rights Reserved for All Countries

•

.. ^'

•

.

^~·

INDEX.

Accessories

Page 22 Bobbin Winder , ••••••••••••• , , •• , ••• , • • • • • • • • • • • • • 22 Driving Equipment .•.•.•.• , • . . . • . . . • . 24 ror Machines when set in pairs •••• 27

I:ron Base 23

Knives , • . • • • • • • • • • . • • • . • • • . • • • • • • • • • • • • • • • • • • • • • • 26 Knif'e Grinder • • . • • • • • • . • • • . • • • . • • • • • • • . • • • • • • . • • • 29 Machine No. 71-48 ••..••..••.•••• , ••••. , • • • • • • . • • • • 5 Miscellaneous Parts •. , . . . • • • • • • • • • • • • • . • • • • • • • . • • 26 Numerical List of Parts ••.• , ••.•••..••.• ~... 31

Obsolete Parts 30

Parts f'or Making Buttonholes from 13/16 to l-l/4

inches long 26

Thread Unwinder • . . • • • . • • . . • . . • . • • • • • • • • • • • • • • • • • • 25

INSTRUCTIONS FOR ORDERING

In ordering rrom thta 11st, use ONLY the PART number tn the FIRST column.

The number stamped on a sewing Machine Part ta the num~

her or the Single ^Part only, except when the ^part includes Set Screws, Clamping Screws, Studs and Rollers Spun on, Bmall Wires riveted, or ^Parts soldered together, etc. ,whtch

tt ls necessart to !Urntsh ln combination.

Every combination or parts sent out has ita spec1t1c number which, although not stamped on Parts (eJ:cept in above case), must be ~ed when ordering the combtnatlon.

Each number always tndtcatea the SAl"£ PART tn whatever 11st 1 ^t appears, or tor whatever Machine.

The letters arter some or the numbers indicate the style or !1n1sh onlY, as tollowa:

A. Hardened, Polished, Nickel Plated and Butted.

B. Polished, Nickel Plated and Butted.

C. Hardened only.

D. Polished only.

E. sort, not polished.

F. Hardened and Polished.

H. Blued.

J. Nickel Plated onlY.

R. Merl1zed.

x.

Black Oxide.

XC. Hardened and. Black Oxide.

Y. Black Nickel only.

These letters MtBT BE USED when they appear in the llst and. AFTER the nwnber, as in the llst.

In this series:

200001 to 201500 and. 350001 to 351500 are screw Numbers.

201501 to 201800 and 351501 to 351800 are Nut Numbers.

201801 to 202000 and 351801 to 352000 are Roller Numbers.

202001 to 350000 are Numbers or Machine Parts.

The figures in the second. column rerer onlY to the plate in Which the lllustration or the part is shown and are NOT TO BE USED in ordering.

Two or more numbers over a cut indicate that the dl!- terence between such parts is not visible in an illustra- tion.

Parts marked with an asterisk (•) are turnished when repairs are made at the ractory.

i

I I

i

_I

L I I

. .J

I

^l

~:

^r,

' '·

r

I

---,

5

LIST OF 'PARTS COMPLETE

FOR

MACHINE No. 71-48

MAKES TOP CORDED BUTTONHOLES, WHIP STITCH, SQUARE BAR AT FIRST END AND TAPER BAR AT FINISH- ING END. LAYS A CORD ON THE TOP SIDE UNDER THE OVERSEAMING STITCHES. KNIVES FROM

3fs

^TO

^3,4

^INCH

LONG. CUTS BOTH THREADS, CORD AND HOLE AUTO- MATICALLY AFTER STITCHING.

No.

*39846 8582

748E 868E 23352

*24081 Plate 13585 13585 13585 17931 12357 17931 435AL 17931 4784 17931 1069D 17931 12193 13596 703D 13596

NBJne Arm with 24081

,. Dowel Pin (2) Screw (back) (2)

" (front) (2)

"

"

Shaf't

11 Bushing (:front)

" Flanged Bushing

II II II

Screw

Arm Shaft Oil Pad ⁽²⁾

n Screw Side Cover

(back)

11 Set

" ^"

^{Thumb Screw}

6

No. Plate 23353 13596 808F 13596 39759 13589 858AL 13589 39844 13596 12280 13596 15890 13596 23563 17889 23564 17B89 12760 17889 12260 17889 23565 17889 8050 17889 213949 17889 39616 17889 39617 17889 39618 17889

12270 1655E 23566

::i..24F 15183 23361

12480 23362

93H 15072 23544 23545 2030 23546

999F 23364

240D 23664 23665 12860 23666 23367 193F 7071 23369 23370 8560

*39718 39847 39848

17889 17889 17889 17889 17889 17889 17889 17889 17889 17889 17889 17889 17889 17889

17889 17889 17889 17889 17889 17889 17889 17889 17889 17889 13596 13596 13596 13585 13585

PARTS FOR MACHINE NO. 71-48 Name

Arm Top Cover

IT II

Screw (3) Cam with two 858AL

"

Set Screw

Indicator Stud

Thumb Nut Lever

Catch with 12260

"

Hinge Screw

Position Stud Spring

11 Screw '' Washer Stud

" Rivet (long)

" (short)

Hi~ge Screw Nut Spring Stop Screw

11 11 Nut

Ratchet Pawl

Hinge Screw Spr~ng

Screw Stop Pin Pawl (hinge Retaining

screw end)

Barring Ratchet Retaining Pawl (wheel end)

Barring Ratchet Retaining Pawl Adjust- ing Screw

Barring Ratchet Retaining Pawl (ad- justable) complete₁Nos.203C,23544 and 23545

Barring Ratchet Retaining Pawl Hinge Screw

Bar;ing Rat~het Reta~ning Pawl Spr;ng Screw

Barring Ratchet Wheel

11 Spring

"

"

" "

Screw

11 Screw Washer Tripping Point

II II

Barring Ratchet Wheel Tripping Point Screw Washer

Barring Stop Arm

Bed

" Tripping Lever

11 Bi.nge Screw Oil Guard

Plate

.,

'

No.

1231F 1235F 389D 135D 39539

625F 1547J 39540 40003 219F 40004

207F 191C 39541 23379 23380 196F 402D 39719 40006 40007 404D 23384

520 39591

756D l345D 39645

1230F [:__9543) l232C 1960 1520J 39762 3500760

16710 39532

233D 39720 23392 914F 23393

914F 23394 23395 23396 223D

Plate 13585 13585 17897 17897 13588 13586 13586 13586 13586 13586 13586 13586 13586 13586 13586 13586 13586 13586 13587 13589 13589 13589 13589 13589 13587 13587 13587 1:0587 13587 13589 1358'9 13589 13589 13585 13589 13589 13589 13589 13587 135.87 13587 13587 13587 13589 13589 13589 13589

PARTS FOR MACHINE NO. 71-48 7 Name

Bed Oil Guard Plate Screw (2) '' " Screw (2)

Bobbin Winder Base Plate Screw

" Tension Bracket Screw

Cl~p Arm

Adjusting Screw (2)

" " Nut {2) Bracket with l96F

Guide (left)

Hinge

"

" " Screw (2) (ri~ht)

Screw (2), Screw (3)

" Washer Block

Pin (3)

Set Screw Screw

Carrier

Block with 40007 and rour 404D

Clamp Carrier Block Plate

" u ¹¹ Screw

1960

Connecting Rod Guide

"

" 11

Hinge Screw (left)

n Sci"eW (long)

11 (short) (right)

" Screw (2) Regulator with 233D and Clamp Carrier Regulate~ Hinge Screw

II II n Roller and Screw Stud with 1520J

Clamp Carrier Regulator Roller and Screw Stud Nut

Clamp Carrier Regulator Slide

" " " Stud (to regulate length of buttonhole).

Cl~p Carrier Regulator Stud Nut

n ^{11 11} Sleeve

two 756D

11 Stop Screw Slide with 1345D,39591 and Clamp Carrier Slide Guide (left)

n 11 " " 11 Screw

(2)

Clamp Carrier Slide Guide (right)

11 n II 11 11 Screw

(2)

Cl~p Carrier Sl~de LeverR:~~~a~~;o

" Cap

lf II

Screw (4)

8 No.

67D 1960 1520J 7278 12340 23397

16580 1256D 39914

1297F 39915

237F 50354E 39916

39724 40015 410 1520J 1901 40016 157F 39541

229D 12424

199D 40017 39725 162D 12480 1611E 40019

59D 40020

1235F 23573

402D 23574

16590 39514

Plate 13589 13589 13589 13589 13589 13589 13589 13587 13588 13588 13588 13588 13588 13588

13588 13593 13593 13593 13593 13593 13593 13593 13593 13593 13588 13593 13593 13593 13593 13593 13593 13593 13586 13587 13586 13586 13586 13586 13586

, ,

_ _ _ .---

PARTS FOR MACHINE NO, 71-48 Name

Clamp Carrier Slide Lever Regulator Screw

Clamp Carrier Slide Lever Roller and Screw Stud with 1520J

Clamp Carrier Slide Lever Roller and Screw Stud Nut

Cl~p Carrier Slide Lever Socket Joint

11 Regulating Stud

..

Bushing

Clamp Carrier Slide Regulating Stud Thumb Nut

Clamp Carrier Slide Screw (2)

11 Check with 39915,50354E and two '237F

Clamp Check Screw (2)

11 11 Section and Cutting Plate

II II

Screw

Clamp Check Section and Cutting Plate Support Stud (short)

Clamp Check complete,ror 3/8 to 3/4 in.

buttonhole,Noa.219F,2269,39858, 39866,39867,39914 and 40050 Clamp Lifting Arm

II II II Connection

" ~ge Screw Nut Roller and Screw Stud with 229D and 12424 Clamp Lifting Arm Connection Roller

and Screw Stud Bracket

Clamp Lifting ~ Connection Roller and Screw Stud Bracket Screw Clamp Lifting Arm Connection Roller

and Screw Stud Bracket Screw Washer Clamp Lifting Arm Connection Roller

Cap Screw

Clamp Lifting Arm Connection Roller Cap Screw Washer

Clamp Lifting Arm Screw (2)

" " " Stop

" Bracket

"

"

Screw (2) Clamp Plate

"

11 " Screw (4)

SUpport

"

" Screw

"

^Post

Screw (2) Hinge Screw

11 11 Nut

Pitman Hinge

(2)

"

"

Pressure Regulating Thumb Nut Spring

..

'

No.

23693 12940 1550J 18859 39899 39768 389F 39770

236F 39852 . 350067E 39853 39854 230F 39905 39855 39773 39772 l329D 39780 39781 39788 50166E

1241E 39785

185H 39782

Plate 13586 13586 13586 13585 13592 13592 13592 13585 13585 13592 13592 13592 13592 13592 13592 13592 13592 13592 13592 13592 13589 13592 13592 13592 13592 13592 13589 453AL 13589 39783

39786 39787 8710 12000 1521E 39784 39856 39832 2013210

7071

13592 13592 13592 13592 13592 13592 13592 13592 13592 13592 13592

PAthS FOR MACHINE NO. 71-48

Clamp Spring

Name Bushing

II II 11

Position Cord Guide

11 Leading Bracket

11 11 Dowel Pin Screw Eye (double)

11 Screw Finger (lower)

Stud

11 11 Screw

9

Nut

11 Washer (up1;er)

Screw

Cord Leading Finger c·omplete,Nos.39852 to 39854 and 350067E

Cord Rotating Gear

"

"

Spring

G1b (back) (front) Screw (4) Slide

Block Connecting Cord Rotating Gear Slide Connecting

Spring Screw Eye (back)

Cord Rotating Gear Slide Connecting Spring Screw Eye (front)

Cord Rotating Gear Slide Extension

n n n Screw

( 2) Cord Rotating

two 453AL Cord Rotating

Screw Cord Rotating

II II

Rod

Gear Slide Flange with Gear Slide Flange Set Gear Slide Sleeve

11 Slide

Cord Rotating Gear Slide Sleeve Slide Rod Connection

Cord Rotating Gear Slide Sleeve Slide Rod Connection Handle dcrew Cord Rotating Gear Slide Sleeve Slide

Rod Connection Hinge screw

Cord Rotating Gear Slide Sleeve Slide Rod Nut

Cord Rotating Gear Slide Sleeve Spring

11 11 Sector with 7071,39832 and 2013210

Cord Rotating Sector Adjustable Catch Notch Gib

Cord Rotating Sector Adjustable Catch Notch Gib Screw

Cord Rotating Sector Adjustable Catch Notch Gib Screw Washer

,,

10 No.

39775 39776 39777 219F

Plate 13594 13594 13594 13594 240D 13594 39778 13594 219F 13594 440AL 13594 1547J 13594 201287D 13592 1520E 13592 213949 13592 39779 13589 453AL 13589 39790 13585 2455 13585 501670 13585 39789 13585 1562J 13585 24028 1.7891

*24085 896E 908C 1619E 262010

217F 23407

375C 1518J 23408

*12204 966E 202277

23409 1275C 1521E 23557 23412

448AL 39994 39995 39996 90D 39523

1049E 207E

17891 17891 17891 13585 13585 17891 17891 17891 17891

17891 17891 17891 17891 17891 17891 17931 17931 13589 13589 13589 13589 13589 13589 13589

- - - ---

--- ^,:---

PARTS FOR MACHINE NO. 71-48 Name Cord Rotating Sector catch

II !!

two 219F

Connection

"

Collar with Cord Rotating

Collar Set Cord Rota~ing

Sector catch Connection Screw

Sector Catch Screw (2)

11 Spring

"

^{11 Screw}

Stop Screw

11 11 Nut

Hinge Screw (eccentric)

Cord Rotating Sector Hinge Screw Nut

11 11

" 11

Washer Tripping Cam with two 453AL

" '' Set Screw Take-up Spring

Tension Disc (2)

11 Screw Stud Spring Thumb Nut

Crank Connecting Rod with 24085 and two 896E

Crank Conne~ting Rod C~p

Screw Hinge Screw

" " Nut Face Plate

Screw (2)

Feed Connecting Rod (lower)

" " Hinge Screw Nut

Feed Connecting Rod (upper) 202277 and two 966E Feed Connecting Rod (upper)

n

with 12204 Cap

II II II 11 Screw

Oil Packing~·

(wiek)

Feed Disengaging Lever

II II HingA Screw

II II Nut

"

^Spring

Eccentric with 448AL

11 Set Screw Hand Ratchet Lever

11 Pawl Body Feed Hand Ratchet Lever Pawl complete,

Nos.207E,39523,39995 and two 1049E Feed Hand Ratchet Lever Pawl Hinge

Screw

Feed Hand Ratch~t Lever Pawl Point

"

Position Screw

Feed .Hand Ratchet Lever Pawl Point

I •

.. '

No.

13218 39997 39924 3012

460AL 23418 23419 23420 23421

448AL 23422 39590 l81D 39792 249555 249562

249556 350415C 201897 249549 249550 255096 255097 249560

249551 249561 50088C

*23429 196E 249557

52C 1236C 7070 201724A

185H 249558

1237C 1520J

Plate 13589 13589 13589 13589 13589 17891 17891 17891 17891 17891 17891 17891 17891 13590 13590 13590

13590 13590 13590 13590 13590 13590 13590

13590 13590 13590

13590 13590 13590 l3590 13590 13590 13590 13590 13590 13590

PARTS FOR MACHINE NO_ 71-48 11 N9J11e

Feed Hand Ratchet Lever Pawl Spring Feed Hand Ratchet Lever complete,Nos.

90D,13218,39994 and 39996 Feed Hand Ratchet Wheel with 460AL

11 11

Pin Set Screw Rock Shaf't

Feed Rock Shaf't comulete,Nos.23418 and 23420

Fe~d Rock Shaf't Hi~e Pin with 23421 Plug (leather}

Feed Rock Shaf't

"

Hinge Pin Set Screw Spring

11 Plate Screw

Wheel With 23432 and two 220D Clutch Disc

"

249555 with 249549 to 24955l,three each l85H, 201897,255096 and 255097

Feed Wheel Clutch Disc Locking Plate with 3504150

Feed Wheel Clutch Disc Locking Plate Screw

Feed Wheel Clutch Roller

Felt

Carrier Oiling Feed Wheel Clutch Roller Spring

11 11

Guide Feed Wheel Clutch {positive} complete,

ror machines equipped with spring clutch,Nos.52C,201724A,249556 to 249559,249561,249562,249820 and Form 246lw

Feed Wheel Driving Lever

" 11 11 11

Pitman with 23429,500880 and two 196E

Feed Wheel Driving Lever Pitman Ball Joint Screw

Fe~d Wheel Dri~ing Lever Pitman C~p

Screw

Feed Wheel Dri~ing Lever Plate Screw Regulating Stud

Feed Wheel Driving Lever Regulating Stud Sleeve

Feed Wheel Driving Lever Regulating Stud Thumb Nut

Feed Wheel Driving Lever Screw

11 11 11

Washer (relt}

Friction Rin,,g Screw

11 Nut

12 No.

14017 23552 23553 23554 23555 21170 249559

39595 8980 39504

2256 2330 721D 39596 39793

457AL 23433 350237C

l620E 23587

2030 23435

190D l79E 23432

2200 39799 39840 39800 39831 39801 39841 39829 23460 23461 12390 1240C 23462

1319F 249656

23464 23465 157D

soc

1963

Plate 13590 13590 13590 13590 13590 13590 13590 13590 13590 13590 13590 13590 13590 13590 13589 13589 13590 13590 13590 13590 13590 13590 13590 13590 13590 13590 13591 13591 13591 13591 13591 13591 13591 13591 13591 13591 13591 13591 13591 13591 13591 13591 13591 13591 13591

PARTS FOR MACHIN~ NO. 71-48 Name

Feed Wheel Friction Ring Screw Washer

11 Section (long)

Feed Wheel Friction Ring Section (short)

Feed Wheel Friction Ring Spring Feed Wheel Friction Ring complete, No's.

23552 to 23554 Feed Wheel Pin

Reta;ning Clutch

11 Cap

"

Washer

Screw

"

Fe'ed Wheel Reta.;ning Clu~ch Spring

11 Screw

" Stop Screw

Feed Wheel Retaining Shaft

Clutch Stud Oil

Tripping

Hole Plug Screw Lever

"

Hinge Screw

" '~' Nut Point

Screw (2) Sp'f>ing

11 Screw Stop Screw Point

"

^Screw

Knif'e, 3/B incq

11 7/16 inch 1/2 inch 9/16 inch 5/8 inch 11/16 in·~h

3/4 inch Bar

"

Screw

Connecting Link

"

Hinge Cap

Knife Bar Connecting Link Hinge Screw Stud with 1319F

Clamping Screw Disengaging Lever with 1242E

11 11 Catch with 1963

Knife Bar Disengaging Lever Catch Bracket

Knife Bar Disengaging Lever Catch Bracket Screw (2)

Knife Bar Disengaging Lever Catch Hinge Screw

Knife Bar Disengaging Lever Catch Roller and Stud

..

No.

23468 1241E 23466 23467

Plate 13591 13591 13589 13589

448AL 13589 175D

90C 23606

1242E 23469 3502810

1428C 1520J 23681

805C 23470 23471 54C 1222C 1959

2290 12424 249737 249544 249545 50615D 39796

12430 16080 157C 1547J 1094F 23390 39857 23476 794E 1021E 39601

13410 13589 13591 13591 13591 13591 13591 13591 13591 13591 13591 13591 13591 13591 13591 17932

17932 17932 13591 13591 13591 13591 13591 13595 13595 13591 13591 13591 13591 13595 13595 13595 13595 13595 13595

P'ARTS FOR MACHIN~ NO. 71-48 Name

Knife Bar Disengaging Lever Catch Spring

Knife Bar Disengaging Lever Catch Spring Screw Stud (2)

Knife Bar Disengaging Lever Catch Tripping Point

Knife Bar Disengaging Lever Catch Tripping Point Collar with two 448AL

Knife Bar Disengaging Lever Catch Tripping Point Collar Set Screw Knife Bar Disengaging Lever Catch

Tripping Point Screw

Knife Bar Disengaging Lever Hinge Screw

Knife Bar Disen~aging Lever Spr~ng

Screw (2)

Knife B~r Dri~ing Le~erHinge Screw Spring

Screw Stud

13

Nut

11 Screw (interm~diate) Connecting Link

Knife Bar Driving Lever (intermediate) Connecting Link Hinge Screw

Knife Bar Driving Lever (interme·diate) Hinge Screw

Knife Bar Driving Lever (intermediate) Roller· and Screw Stud with 229D and 12424

Knife Bar Driving Lever (intermediate) Roller Cap Screw

Knife Bar Driving Lever (intermediate) Roller Cap Screw Washer

Knife Bar Spring St~p

Retainer Plate Holder

Screw

Guide Stud Screw

Nut

Washer Needle Bar with 904F

Nut

Screw (2)

"

Connecting Link with 794E

11 11

A"djusting Screw

Needle Bar Connecting Link Cap Screw Stud with 13410

Set Screw

14 No.

23477

Plate 17931 1065AL 17931 85BAL 17931 39794 13595 23558 17889 1956 17889

16550 17889 229D 17889 23389

23667 39966 12440 39622 39926 78C 1963 23483 23484 1226E 23485

196F 39967

17889 17889 17889 17889 17889 17889 17889 17889 17889 17889 17889 17889 17889 17931 453AL 17931 23610

23609 1900 7071 23611

13595 13595 13595 13595 13595

10420 13595 1547J 13595 23_491 13595 39909, ^v ',, ) .. 3595 10380 13595 707,0 13595

PARTS FOR MACHINE NO. 71-48 Name

Needle Bar Crank with 858AL,l036AL, 1065AL and l258AL

Needle Bar Crank Position Screw Set Screw Frame with 4784

Bell Crank with 1956 and 15072

Needle Bar Frame Bell Crank Roller and Screw Stud with 229D,l655C and 23389

Needle Bar Frame Bell Crank Roller and Screw Stud Nut

Needle Bar Frame Bell Crank Roller Cap Screw

Nee'dle Bar Frame Bell Crank Roller Cap Screw Washer

Needle Bar Frame Bell Crank Stud Cam and Bevel Gear

"

Screw

Needle Bar Frame Connection with 1963 and 39616 to 39618

Needle Bar Frame Connection 39622 with 780 and 1226E

Needle Bar Frame Co~~ection Hinge Screw

Needle Bar Frame Connection Roller and Stud

Needle Bar Frame Connection Spring

" Hook;

Screw Stud

Needle Bar Frame Connectiun Stud Set Screw

Needle Bar Frame Driving Bevel Pinion with two 453AL

Needle Bar Frame Driving Bevel Pinion Set Screw

Needle Bar Frame Pitman (hinge screw end)

Needle Bar Frame Pitman (regulator end)

Adju~ting Screw Washer

Needle Bar Frame Pitman (adjustable) complete,Nos.23609,23610,two each 190C and 7071

Needle Bar Frame Pitman Hinge Screw

Sleeve

n 11 u n Nut

Regulator

" 23491 with 12450

Adju~t:l.ng Screw

'

No.

15890 12450 673F 1517J 39837

404D.

904F 39653 39654 23494 23421

Plate 13595 10595 13595 13595 13587 13587 13595 17891 17891 17891 1.7891 448AL 17891 4784

39655 39656 24047 39657 39692 12530

1~170

226J 12424

10350 1636E 15171

*248538 249891 249539 2005840 249540

40024 39927 249541 249542 40025 23500 15140 2973 2974 15141 2975

17891 17931 17931 17931 17931 17931 17931 17931 17931 17931 17931 17931 17931

17931 17931 17931 17931 17931 17931 17931 17931 17931 18200 18200 18200 18200 18200 18200

PARTS FOR MACHINE NO. 71-48 Name

Needle Bar Frame Regulator Adjusting Screw Thumb Nut

15

Needle Bar Frame Regulator Hinge Screw

11 Screw Center

11 Nut

( 2) Set Screw Oscillating Rock Shaft

Oscillating Rock Shaft complete,Nos.

4784,23494 an·:l. 39653

Oscillating Rock Shaft Rinse Pin with 23421

Oscillating Rock Shaft Hinge Pin Oil Hole Plug (leather)

Oscillating Rock Shaft Hinge Pin Set Screw

Oscillating Rock Shaft Oil Pad

11 Shaft

Bushing (back)

11 (front) Crank

Oscillating Shaft Crank complete,Nos.

1636E,l5171,39657 and two 12530 Oscillating Shaft Crank Set Screw

" Slide Block

Cap Screw

Oscillating Shaft Crank Slide Block Cap Screw Washer

Oscillating Sha~t Crank Slide Block Screw Stud

Oscillating Shaft Crank Slide Block Screw Stud Nut

Oscillating Shaft Crank Slide Block complete Nos.226J,l035C,l2424 and 15170

Pul;ey (loose) with 200584D

11 Ball Bearing Bushing

Grease Retaining Screw Pulley (loose,ball bearing) complete,

Nos.249538,249539 and 249891 Pulley (tight)

11 40024 with 40025 (tight) Counterbalance

11 11 Rivet

Pin Shuttle Bobbin

"

Case Latch

"

n

Pin

Lever

"

^Fulcrum

Shuttle Bobbin Case Hinge Nos.2973, 2974 and 15140

Shuttle Bobbin Case Latch Spring

16 No.

592E 39623

2523 249546 399D 40112

40028 591F 15278 40029 23505 2269

462AL 249924

39969 2532 2533 907E 7326

662D 249928 249926 203E 249927 249929

145F 39627

717C 1520J 23556

159F 23510

8582 123E 23511

61C 564C 58384

1508R 14174

124F 1518J --- 39628

39580 23514 1070C

Plate 18200 18200 18200 18200 18200 18200

18200 18200 18200 18200 17931 17931 17931 18200 18200 18200 18200 18200 18200 18200 18200 18200 18200 18200 18200

18200 17932 17932 17932 17932 17932 17932 17932 17932 17932 17932 17932 17932 17932 17932 17932 17932 17931 17932 17932 17932

PARTS FOR MACHINE NO. 71-48 Name

Shuttle Bobbin Case Latch Stop Screw Position Fin¥rer Rivet

Shuttle Bobbin Case Position Plate

11 Screw Shuttle Bobbin Case complete,Nos.591F,

592E,2523,2975,15141,15278 and 39623

Shuttle Body

11 Tension Regulating Screw

11 Spring

1-11/16 1n.d1am.Nos.23500,40112 and 40028

Shuttle Driver with 462AL

11 Pin

Race

Set Screw Back

Cap

Position Pin Spring

11 Screw

11 Screw

Oil Packing (wick) Plate

Screw Position Pin

Shuttle Race complete,Noa.907E,'2533, 7326,39969,249546,249924,249926,two each 399D,66ZD,2532,2499271249928 and three 203E

Shuttle Race Screw Starting Lever

11 Adju~ting Screw Nut

1508R (2)

Belt Shifter

"

^Screw

Bracket

Rod

Dowel Pin Screw Hinge Screw Screw Center

564C with Starting Lever Screw Center Nut

IT ". Spring

Stop Cam

"

Stop Screw

It IT Nut

with 39629 and 202330 Interlocking Rod

"

Guide with

l070C and 1959

Stop Cam Interlocking Rod Guide Set Screw

No.

39988 21651 913C 1638E 202330

39629 23515 23516 249543 9780 997E 39637

13490 39638

457AL 23518

78D 9540 2102 15600 23519 40033 12538 50128E 40051 40052 1352C 40053

2117C 641C 40054 40067 966D 40060

1241E 717C

Plate 17932 17932 17932 17932 17931 17931 17931 17931 17931 17931 17931 17931 17931 17931 17931 13589 13589 13589 13594 13594 13594 13593 13593 13593 13593 13593 13593 13593 13593 13593 13593 13593 13593 13593 13593 13593

PARTS FOR MACI-IINE NO. 71-48 17 Name

Stop Cam Interlocking (rawhide)

Rod Guide Washer Stop Cam Interlocking Rod Spring

IT tt tt 11

Regu- lating Thumb Screw

Stop Cam Interlocking Rod Spring Regu- lating Thumb Screw Nut

Stop Cam Oil Packing (wick)

11 Pin

Spring (long)

n (short)

Cover with 24954l,two each 9780 and 24954-2

Stop Cam Spring Cover Position Pin

11 11 11

Screw ( 2)

Lever

Stop Block

"

^Screw

Block

Hinge Screw Spring

Set Screw

Tension (si~e of arm) Disc (2) Regulating Thumb Nut

Tension (aide of arm) Releaser with 200F

arm) Releaser Arm Tension

with Tension

"

(aide of 50128E

(ai~e of arm) Releaser Arm Pin

"

^Set

Screw

Tension (aide of arm) Releaser Lever with 641C

Tension (side of arm) Releaser Lever Lock Pin

Tension (side of arm) Releaser Lever Lock Pin Screw Bushing

Tension (aide of arm) Releaser Lever Lock Pin Spring

Tension (side of arm) Releaser Lever Pin

Tension (side of ar.m) Releaser Lever Set Screw

Tension (side of arm) Releaser Lever Shaft

Tension (side of arm) Releaser Lever Shaft Bracket

Tension (aide of arm) Releaser Lever Shaft Bracket Screw (4)

Tension {aide of arm) Releaser Lever Spring

Tension {aide of arm) Releaser Lever Spring Screw Stud (2)

Tension (side of arm) Releaser Lever Stop Screw

18 No.

1520J 200F 39797 39798 6790 l520J 2269

Plate 13593 13594 13594 13594 13594 13594 13594 413F 13594 2103 13594 23669 13594 460AL 13594 39867

39858 39917 40044 2273 237F 40045

1060 39860 39861 201296D

7071

2012890 39862

233D 39863 39903 39864

13588 13588 13588 13588 13588 13588 13588

13588 13588 13588 13588

13588

13588 13588 13588 13588 13588 l:'l588

PARTS FOR MACHIN~ NO. 7.1-48

Tension (side Stop Screw Tension (side

Screw Ten~ ion ( si~e

Crank T-ension (side

Crank Ball Tension (side Crank Ball Tension (side Crank Pin Te~~ion (si~e

Screw

Name

of arm} Releaser Lever Nut

of arm) Releaser Set of a~m) Releaser Shaft

of arm) Releaser Shaft Screw Stud

of arm) Releaser Shaft Scre)'l Stud Nut

of arm) Releaser Shaft of arm) Screw Stud

11 Spring Thread Guard

11 Set

Thread and Cord (upper) Clamping Blade

11 Cut~ing Blade Connecting Rod

Thread and Cord {upper) Cutting Blade Connecting Rod Collar with 237F Thread and Cord {upper) Cutting Blade

Connecting Rod Co~lar Pin

Thread and Cord (upper) Cutting Blade Connecting Rod Collar Set Screw Thread and Cord (upper) Cutting Blade

Connecting Rod Collar Washer (rawhide)

Thread and Cord (upper) Cutting Blade Connecting Rod Hinge Screw

Thread and Cord (upper) Cutting Blade Connecting Rod Latch

Thread and Cord (upper) Gutting Blade Connecting Rod Latch Hinge Bracket Thread and Cord (upper) Gutting Blade Connecting Rod Latch Hinge Bracket Screw

Thread and Cord (upper) Gutting Blade Connecting Rod Latch Hinge Bracket Screw Washer

Thread and Cord (upper) Cutting Blade Connecting Rod Latch Hinge Screw Thread and Cord (upper) Cutting Blade

Connecting Rod Latch Spring Thread and Cord (upper) Cutting Blade

Connecting Rod Latch Spring Screw Thread and Cord (upper) Cutting Blade

Connecting Rod Spring

Thread and Cord (upper) Gutting Blade Connecting Rod Spring Bracket Thread and Cord (upper) Gutting Blade

Connecting Rod Spring Bracket Plate

PARTS FOR MACHINE NO. 71-48 19 No.

201291B 39865

201288D

219F 39866 40050 2269 9060 39984 39869 39870

39871

4500 Plate 13588 13588

13588

13588 13588 13588 13588 13588 13592 13589 13589

13589

13589 453AL 13589 201292C 13589 1550J 13589 249529 13592 39873 13592 39874 13592 39875 13592 202F 13592

201290D 13592 1550J 13592 39876 13592 1241E 13593 39878 13592

Name

Thread and· Cord (upper) Gut-ting Blade Connecting Rod Spring Bracket Screw Thread and Cord (upper) Cutting Blade

Connecting Rod Spring Collar with 201288D

Thread and Cord (upper) Cutting Blade Connecting Rod Spring Collar Set Screw

Thread and Cord (upper) Cutting Blade Screw

Thread and Cord (upper) Cutting Blade Shaft

Thread and Cord (upper) Cutting Blade Shaft Crank with 906C

Thread and Cord (upper) Gutting Blade Shaft Crank Pin

Thread and Cord (upper) Cutting Blade Shaft Crank Set Screw

Thread and Cord Cutter Actuating Slide

II !! !! !!

Operating Disc with 4500 and 453AL Thread and Cord Cutter Actuating Slide

Operating Disc Adjusting Sleeve with 1550J and 201292C

Thread and Cord Cutter Actuating Slide Operating D~sc Adjust~ng Sleeve Spring (3)

Thread and Cord Cutter Actuating Slide Operating Disc Position Screw Thread and Cord Cutter Actuating Slide

Operating Disc Set Screw

Thread and Cord Cutter Actuating Slide Operating Disc Stud

Thread and Cord Cutter Actuating Slide Operating Disc Stud Nut

Thread and Cord Cutter Actuating Slide Ratchet

Thread and Cord Cutter Actuating Slide Ratchet Pawl

Thread and Cord Cutter Actuating Slide Ratchet Pawl Bracket

Thread and Cord cu'tter Actuating Slide Ratchet Pawl Disengaging Spring Thread and Cord Cutter Actuating Slide

Ratchet Pawl Disengaging Spring Screw

Thread and Cord Cutter Actuating Slide Ratchet Pawl Hinge Screw

Thread and Cord Cutter Actuating Slide Ratchet Pawl Hinge Screw Nut Thread and Cord Cutter Actuating Slide

Ratchet Pawl Spring

Thread and Cord Cutter Actuating Slide Ratchet Pawl Spring Screw Stud Thread and Cord Cutter Actuating Slide

Ratchet Retaining Spring

20 No.

50164D 39998

240D 39880 201295E

1241E 2012930 201703E 39985

203E 39882 249530 77D 40035 40036 40037

Plate 13592 13592 13592 13592 13592 13592 13592 13592 13592 13592 13592 13592 13592 13587 13587 13593 320 13593 39736 13593 1241E 13593 435AL 13593 1520J 40038 39646 228F 240D 39990

13510 1520J 39921

966D 16710 249845

13593 13587 13587 13587 13587 13593 13593 13593 13593 13593 13593 13587

DARTS FOR MACHINE NO. 71-48 Name

Thread and Cord Cutter Actuating Slide Ratchet Retaining Spring Screw Thread and Cord Cutter Actuating Slide

Ratchet Spring

Thread and Cord Cutter Actuating Slide Ratchst Spring Screw

Thread and Cord Cutter Actuating Slide Spring

Thread and Cord Cutter Actuating Slide Spring Screw Stud

Thread and Cord Cutter Actuating Slide Spring Screw Stud

Thread and Cord Cutter Actuating Slide Stud

Thread and Cord CUtter Actuating Slide Stud Nut

Thread and Cord Cutter Actuating Slide Support

Thread and Cord Cutter Actuating Slide Support Screw (2)

Thread and Cord Cutter Actuating Slide Support Washer (rawhide)

Thread and Cord Cutter Actuating Slide Wheel

Thread and Cord Cutter Actuating Slide Wheel screw

Thr~ad ( lo~er) Cut ~in·g Blade Carrier with 40038

Thread (lower) Cutting Blade Carrier Lever

Thread (lower) Cutting Blade Carrier Lever Hinge Screw

Thread (lower) Cutting Blade Carrier Lever Spring

Thread (lower) Cutting Blade Carrier Lever Spring Screw Stud {2) Thread (l~wer) Cutting Blade Carrier

Lever Stop Screw

Thread (lower) Cutting Blade Carrier Lever Stop Screw Nut

Thread {lower) Cutting Blade Carrier Stud

Thread {lower) Cutting Blade Friction Plate

Thread (lower) Cutting Blade Friction Plate· Screw

Thread (lo~er) Cut~in~e~!!de Screw (2)

"

Nut

Ball Screw

11 11

Nut Extension

Screw

"

Thread (lower) Pull-off Finger

~I

1-

II l

I

I

i ,, I.

I

I'

I I.

c

No.

1060 13500 12400 12401 12402

460AL 12399 23523

1036AL 1258AL 23524 12166 23543 11204

435AL 23525

4784 7335 23526 4460

Plate 13587 13587

PA~TS FOR MACHINE NO. 71-48 Name

Thread (lower) Pull-off Finger Guide Screw

Thread (lower) Pull-off Finger Hinge Screw

Thread Retainer Sleeve Spring Stud

Set Screw

21

13594 13594 13594 13594

13594 Thread Retainer complete3Nos.l2400 to 12402

13595 17931 17931 13595 13595 13595 13595 13595

Thread Tak~-up Cr~

Position Screw Set Screw Lever

Screw

Hinge Pin Link

Hinge Pin

"

^Set

13595 Thread Take-up Lever complete,Nos.

12166,23524 and 23543 13595

13594 13594 13594

Thread Take-up Lever Oil Pad

11 Spring

11 Regulator

n Set Screw

SINGER Needles should be used in SINGER Machines These Needles and their Containers

are marked with the

Company" s Trade Mark "SIMA N C 0.

**"

1

Needles in Containers marked

"FOR SINGER MACHINES"

are NOT SINCER made needles. 2

.,

22

No.

39884

39885 200137H

40013 1238F 39799 39800 39801 23500 39867 39858 40035 255513 71 X l

23527 120346

"12034 7 11831 26026 26485 10875 21654 23535 39986 249820

27914 27915 389F 15072 27916 28084 27302 50356D

1620J 27917

Plate 13597

13597 13597 13597 13597 13591 13591 13591 18200 13588 13588 13587 13597

ACCESSORIES

Name

Gauge,for 3/8 to l-1/4 ino,for setting length of buttonhole,with 39885 and 200137H

Ga~ge Ch~inscrew Guide

Screw Kn1fe,3/8 inch

11 1/2 inch 5/8 inch Shuttle Bobbin (5)

Thread and Cord (upper) Clamping Blade

11 n " ¹¹ Cutting Blade (lower) Cutting Blade

Tweezers

Needles,three each,sizes 14 and 16 Note: When fitted for heavy sweater work

us~ needles 7lx5,size 16 17938

13597 13597 13597 13597 13597 13597 13597 13597 13597 13597

Drip Pan with two wood screws 1/2 in., Nos.5,R;H.B.

Oiler (copper plated) with 120347

11 Spout,8-l/2 in.long

Screw Dri~er,5 in. blade (machine,large)

Wrench,for 1518 and 1520

11 for 1508 and 1638

for 167l,for regulating length of buttonhole

Wrench,for 201703

11 for 350415

BOBBIN WINDER

(SWINGING AUTOMATIC, RIGHT HAND) 17897

17897 17897 17897 17897 17897 17897 17897 17897 17897

Base wi.th 27916 and two 28084 Plate

Sc:J.'l·ew

Bobbin Position Pin Brake (leather)

11 Rivet Frame

Hinge Screw

IT Nut

Spring

1:

•

,,

_{I '}

'I

I

·I

No.

27918

*27849 27538

*27850 41828 27919 35D 27920 41336 27921 2455 1562J

418D 10141 10145 5989 27922 4520 27923

27924

39910

24106 84E 19226 19398 19397 211E 16555 14010 39911 39912 200574E 201655J 39913

Plate 17897 17897 17897 17897 17897 17897 17897 17897 17897 17897 17897 17897 17897 17897 17897 17897 17897

17897

17938

17938 17938 17938 17938 17938 17938 17938 17938 17938 17938 17938 17938 17938

Pulley Spindle

ACCtSSORitS Name

23

11 27849 with 15072,27850 and 41828 Collar

Pin

St~p Latch

Hinge Screw

·Tension Bracket with 4520

Tension Bracket complete,Nos.5989, 10145 and 27920

Tension Bracket with Rod complete, Nos .•

27922 and 41336 Tension Dis·c

Regulating Thumb Nut Screw Stud

Spring Thread Guide

Tension complete,Nos.418D,l562J,l0141 and two 2455

Thread Eyelet Rod

!T II Set Screw Bobbin WiRier Nos.35D,1620J,27302,

27.538,27914,27917 to 27919 and 50356D

Bobbin Winder (swinging automatic, right h.:md) complete,Nos. 27915, 27921,27923 and two 389F ·

IRON BASE

Bed Frame with two each 16555,19398, four each 84E,24106,six 14010 and four wood screws 1-1/4 in.,No.l2 Bed Fr~e Cus~ion {felt)

Screw·

Hin,,ge Con·nection

11 19226 with 2llE and 19397

Bed Frame Ri~ge Connection C~p Screw

H Plate

Rivet Splash Guard with 201655J

H Hinge

11 Screw

Locking Screw Wing Nut Bed Frame and Splash Guard complete,

Nos.39910,399ll,two 39912 and eight 200574E

24

No. Plate 228320 18235 228321 18235 361C 18235 228423 18235 228323 18235 3550 18235 126910 18235 228324 18235

3550 18235 228326 18235 203100 18235 858AL 18235 3550 10235 228327 18235 228328 18235

228330 18235 39571 18235 236849 18235 l064D 18235 236850 18235

39575 18235 39576 18235 23551 18235 234344 18235

250408 18235 232982 18235 228333 18235 39575 18235 39576 18235 228347 18235 228348 18235 228349 18235

DRIVING tQUIPMtNT

Name Bed Frame Cushion (felt) Belt Idler Belt Guide with 3610

Set Screw Pulley

11 Bracket with three 3550

Belt idler Pulley Bracket Set .screw

tJ, n Shaft

Hanger with two 3550 and three wood screws l in.,No.l2

Belt Idler Pulley Bracket Shaft Set Screw

Belt Idler Pulley Shaft with 858AL and 203100

Belt Idler (wick) Belt Idler

Pulley Shaft Oil Packing

Pul~ey Shaft Oil Stop Screw Set Screw Washer {rawhide) Belt Idler complete,Nos.l26910,228324,

two each 228321,228323,228326, 228423,four 228327 and Form All27 Clamp Lifting Chain,46 in.long with

39575. an_d 39576 Cl-;;mp Lifting Ch;;in Gu;de

Screw

Pulley

11 Bracket Hinge Clamp Lifting Chain Guide Pulley

Bracket CQmplete,Nos.l064D,39571, 236849 and two wo_od screws 1-1/4 in, ,No.l2,R.H.B.

Clamp Lifting Chain Hook (large)

11

" (small)

Screw Eye Front Plank Extension (front) with two

wood screws 2-1/4 in.,No.l2 and three wood screws 1-3/4 in.,No.l2 Machine Rest (high) with 23298? and

two wood screws 1 in.,No.l2 Machine Rest Cushion (leather) Starting Chain Cushion Spring

11 11

Hook (large)

n (small·)

(lower) 10-1/2 in.long (upper) 22 in.long Starting Chain complete,Noa.228333,

228347,22834B,two each 39575 and 39576

No. Plate 14372 18235 14373 18235 50581R 18235 2718R 18235 17881 18235 14374 18235 14375 18235 14376 18235

228354 18235

259370 13599

I '

^{259371 13599}

I

10101<' l3t>':;l9 259372 13599 259373 13599 259374 13599 259375 13599 150203 13599 225388 13599 200383C 13599 201018C 13599 259658 13599 225391 13599 201696H 13599 225326 13599 225324 13599 208AL 13599 225322 13599 259377 13599

ACCESSORIES Name Tres.d1e

Extension Screw Sh9-ft Spring Stand

•11 Washer

Treadle co.np1ete,Nos.2718R,l4372 to 14375,17881,50581R and two wood screws l-1/4 1n.,No.l2,R.H.

25

Driving Equipment less shaft pulley co.np1ete,Nos.228328,228330,228349, 234344,250408,two each 14376,23551, four each 228320 and 236850

THREAD UNWINDtR

Sp~ol Pin

C~p (bakelite) Hinge screw- _Washer

Spo()l Pin comp1ete,Nos,l010F and 259370 to 259372

Spool Rest (for one spool) (flat) with 2010180

Spool Rest (for two spools) (flat) with 201018C

Sp~ol Rest Cushion (felt)' Rod

"

^{Set Screw}

Set Screw Sts.nd with 200383C Thread Guide

Lock Nut Position Cup

Rod with 208AL and 225322 Screw

Washer

Thread Unwinder (for three spools) complete,Nos.201696H,225324,225326, 225388,259374,259375,259658,three each 150203,225391,259373 and wood screws 7/8 1n;,No.l2

26

No.

39799 39840 39800 39831 39801 39841 39829 39842 39795 39839 39830 39843 39826 39907

23679

60913 60914 225377 27739 225390

39922 39923

39859

Plate 13591 13591 13591 13591 13591 13591 l3!i91 13591 13591 13591 13591 13591 13591 13591

KNIVES

Knife, 3/8 inch

11 7/16 inch 1/2 inch 9/16 inch 5/8 inch '" 11/16 inch 3/4 inch 13/16 inch 7/B inch 15/16 inch 1 inch 1-1/16 inch l-l/8 inch

11 1-1/4 inch Name

MISCELLANEOUS PARTS

17941 DTip Pan,?/8 in.deep

USED IN CONJUNCTION WITH THREAD UNWINDER 13599

13599 13599 13599 13599

Spool Weight With 60914

11 11

Center Pin Wire,for small spools Thread Cone

11 Holder

PARTS FOR MAKING BUTTONHOLES FROM 13/16 TO IY., INCHES LONG

13598 13598

13598

Clamp Check with 39915,50354E and two 237F

Clamp Check comPlete,for 13/16 to 1-1/4 1n.buttonholes,Nos.219F,2269, 39858,39866,39867,39922 and 40050 Thread and Cord (upper) Cutting Blade

Connecting Rod

27

DRIVING EQUIPMENT

PARTS REQUIRED FOR MACHINE WHEN SET IN PAIRS No.

228320 228321 361C 228423 228323 3550 126910 228324

355C 228326 203100

858AL 355C 228327 228328

228329

228330

39571 236849 1064D 236850

39575 39576 23551 228331 39810 228332 6337

Plate 17903 17903 17903 17903 17903 17903 17903 17903

17903 17903 17903 17903 17903 17903 17903

17903

17903

17903 17903 17903 17903

17903 17903 17903 17903 17903 17903 17903

Name Bed Frame Cushion (felt)

11 Idler Belt Guide with 3610 Set Screw Pulley

!! Bracket with three 355C

Beltldl,,er Pull,,ey Bracket Set Screw

11 Shaft Hanger with two 3550 and three wood screws 1 in. ,No.l2

Belt Idler Pulley Bracket Shaft Set Screw

Belt Idler Pulley Shaft with 858AL and 203100

Belt Idler Pulley Shaft Oil Packing {wick)

Belt Idler Pul;,ey Shaft Oil Stop Screw Set Screw Washer (rawhide) Belt Idler complete,Nos.l26910,228324,

two each 228321,228323,228326, 228423,four 228327 and Form All27

~lamp Lifting Chain,34 in. long with 39575 and 39576 (for left hand machine)

Clamp Lifting Chain, 46 in·. long with 39575 and 39576 (for right hand machine)

Clamp Lifting Chain Guide

!I II II II

Screw

Pulle;yt'·

11 Bracket Hinge Clamp Lifting Chain Guide Pulley

Bracket complete,Nos.l064D,39571, 236849 and two wood screws 1-1/4 in. ,No,l2,R.H.B,

Clamp Lifting Chain Hook (large)

11 11

'' n (small) Screw Eye Front Plank Extension with two wood

screws 2-1/2 in,,No.l4 Knee Starting Rock Shaft

" "

11 11 Connecting Rod

II II

Bracket with two 356C

356C 17903 Knee Starting Rock Shaft Connecting Rod Bracket Set Screw

356C 17903 Knee Starting Rock Shaft Connecting Rod Set' Screw

28 No.

228333 39575 39576 228334 228335

21327 6335 6336 2766 3560 1507R 2767 150668 3560 228337 228338 454C 2770 1402190 228339

250408 232982 14372 14373 50581R

2718R 17881 14374 14375 14376

Plate 17903 17903 17903 17903 17903

17903 17903 17903 17903 17903 17903 17903 17903 17903 17903 17903 17903 17903 17903 17903

17903 17'903 17903 17903 17903 17903 17903 17903 17903 17903

DRIVING IOQUIPMIONT Name

Knee Starting Rock Shaft Connection Cushion Spring

Knee Starting Rock Shaft Connection Hook (large}

Knee Starting Rock Shaft Connection Hook (small)

Knee Starting Rock Shaft Connection Spring

Knee Starting Rock Shaft Connection complete,Nos.39575,39576,228333 and 228334

Knee Starting Rock two wood screws Knee Starting Rock

Shaft Hanger with 1 in.,No.lO Shaft Knee Arm

l! I! 11

6335 with 2766 and 2767

Knee Starting Rock Sh~ft Knee Arm Hub with 3560

Knse Starting Rock Shaft Knee Arm Hub Set Screw

Knee Starting Rock Shaft Knee Arm Lock Nut

Knee Starting Rock Shaft Knee Plate with 3560

Knee Starting Rock Shaft Knee Plate Pad (rubber)

Knee Starting Rock Shaft Knee Plate Set Screw

Knee Starting Rock Shaft Position Spring

Knee Starting Rock Shaft Position Spring Adjusting Collar with 4540 Knee Starting Rock Shaft Position

Spring Adjusting Collar Set Screw Knee Starting Rock Shaft Stop Dog with

1402190

Knee Starting Rock Shaft Stop Dog Set Screw

Knee Starting Rock Shaft complete,Nos.

l507R,2770,6336,6337,39810,150668, 228332,228335;228337,228338 and two 21327

Machine Rest (high) with 232982 and two wood screws-1 in.,No.l2 Machine Rest Cushion (leather) Treadle

Extension

Shaft Spring Stand

Screw Washer

Treadle complete,Nos.2718R,l4372 to 14375,17881,50581R and two wood screws -1-1/4 in.,No.12,R.H.

No.

228355

39886 39887 201510D 204101

39888 350068E 206963 2004030 206969

39889 39890 570 39891 203094 200165H

39892 201298C

39893

Plate 17903

17904 17904 17904 17904 17904 17904 17904 17904 17904 17904 17904 17904 17904 17904 17904 17904 17904 17904 200577XC 17904

10249 219F 2003860 39894 206232 2010520

771D 9525 39895 39896 204264 176D '::04264

793D 39897

208AL 17904 17904 17904 17904 17904 17904 17904 17904 17904 17904 17904 17904 17904 17904 17904 17904

DRIVING EQUIPMENT 29

Name

Driving Equipment less shaft pulley comp1ete,Noso228329 to 228331, 250408,two 14376,23551,228328, 228339,23G850,eieht 228320 and two blue prints

KNIFE GRINDER

Em~ry Wheel,4 in.di&~eter 11

• Dri ~ing Shaft Nut

Washer Oil Hole Cover Screw

Emery Wheel Driving Shaft Pulley with two 2004030

Emery Wheel Driving Shaft Pulley Set Screw

Emery Wheel Washer (paper) Knife Grinder Frame

Holder (adjustable)

11 Hinge Screw Indicator

Position Pin Screw

Slide Bracket with 2003860 Adju;ting Sc~ew

Slide Plate

Knife Holder Slide Bracket Adjusting Screw Slide Pl~te Screw

Knife Holder Slide Bracket Adjusting Screw Tension Spring

Knife Holder Slide Bracket Adjusting Screw Tens.ion Spring Screw Knife Holder Slide Bracke.t Set Screw

Shaft Collar with 2010520

Knife Holder Slide Bracket Shaft Collar Set Screw

Knife Holder Thumb Screw

,..

Washer Holding Spring

11 11

Bracket

Position Pin Screw Position Pin Thumb Screw (adjustable)

Screw

30 No.

39898

23529

23373 39582 23375 23376 39850 23680

Plate 17904

KNIFE GRINDER NBJ11e

Knife GrindQr complete,Nos.57C,l76D, 208AL,219F,771D,793D,9525,10249, 39886 to 39897,200165H,201298C, 201510D,203094,204101,206963, 350068E,two each 2'00577XC,204264, 206232,206969 and three wood screws 1-1/4 in.,No.l2

OBSOLI:TI: PARTS

Bed Frame with two each 16555,19398, four each 84E,24106,s1x 14010 and four wood screws 1-1/4 1n.,No.l2 Belt Cover

..

^Bracket Hinge Block with 460AL Pin

Clamp Check Section and Cutting Plate Shuttle Tension Spring

SINGER Needles should be used in SINGER Machines These Needles and their Containers

are marked with the

Company's Trade Mark "SIMA N C 0.

**"

¹

Needles in Containers marked

"FOR SINGER MACHINES"

are NOT

SINGER

^ma~e needles. 2

31

NUMERICAL LIST OF PARTS

No.

320 35D

Plate 13593 17897 410 13593 520 13589 520 13590 540 13591 570 17904 59D 13593 61C 17932 G7D 13589 77D 13592 780 17889 78D 13589 84E 17938 90D 900 900 93H 1.06C 1060 123E 124F 124F 135D 145F 157F 157D 1570 159F

13589 13591 13591 17889 13588 13587 17932 17889 17932 17897 18200 13593 13591 13591 17932

Name

Thread (lower) Cutting Blade Carrier Lever Hinge Screw

Bobbin Winder Stop Latch Hinge Screw, for 27923

Clamp' Lifting Arm Conn8ction Hinge Screw

Clamp Carrier Connecting Rod Hinge Screw

Feed Wheel Driving Lever Plate Screw, for 249560

Knife Bsr Driving Lever (intermediate) Connecting Link Hinge Screw

Knife Grinder Knife Holder Hinge Screw for 39898

Clamp Lifting Arm Stop Pitman Hinge Screw

Starting Lever Rod Hinge Screw Clamp Carrier Slide Lever Hegulator

Screw

Thread and Cord Cutter Actuating Slide Wheel Screw

Needle Bar Frame Connection Hinge screw,for 39926

Stop Lever ~nge Screw

Bed Frame Cushion Screw,for 23529 and 39910

Feed Hand Ratchet Lever Pawl Hinge Screw,for 39997

Knife Bar Disengaging Lever Catch Hinge Screw

Knife Bar Disengaging Lever Hinge Screw

Barring Ratchet pawl Spring Screw Thread and Cord (uppe_r) Cutting Blade

Connecting Rod Hinge Screw Thread (lower) Pull-off Finger Guide

Screw

Starting Lever Bracket Screw Barring Lever Stop Screw Starting Lever Stop Screw

·Bobbin Winder Tension Bracket Screw Shuttle Race Screw

Clamp Lifting Arm Connection Roller and Screw Stud Bracket Screw Knife Bar Disengaging Lever Catch

Bracket Screw Knife Holder Screw

Starting Lever Belt Shifter Screw

32 No.

l62D 175D l76D 179E lBlD l85H l85H l90D l90C l91C l93F l96F l96E l96F 199D 200F 202F

2030 203C 203E 203E 207F 207E

Plate 13593 13589 17904 13590 17891 13592 13590 13590 13595 13586 17889 13586 13590 17889 13588 13594 13592

17889 13590 13592 18200 13586 13589 20BAL 17904 208AL 13599 211E 217F 219F 219F 219F 219F

219F 220D

17938 13585 13586 13594 13594 17904

13588 13590

NUMERICAL LIST OF PARTS Name

Clamp Lifting Arm Stop Bracket Screw Knife Bar Disengaging Lever Catch

Tripping Point Screw

Knife Grinder Knife Holding Spring Bracket Screw,for 39898

Feed Wheel Tripping Lever Stop Screw Rook Shaft Spring Scre;.T

Cord Rotating Gear Slide Extension Screw

Feed Wheel Dr! vin,s Lever Screrr, for 249562

Feed Wheel Tripping Lever Spring Screw Needle Bar Frame Pitman Adjusting

Screw,for 23Cll Clamp AFm Bracket Screw

Barring Ratchet Wheel Tripping Point Screw

Clamp Arm Hinge Block Pin Set Screw, for 39540

Feed WheGl Driving Lever Pitman Cap Screw,for 249561

Needle Bar Frame Connection Stud Set Scre·rr

Clamp Lifting Arm Screw

Tension (side of arm) Releaser Set Screw,for 23519

Thread and Cord Cutter Actuating Slide Ratchet Pawl Disengaging Spring Screw

Barring Ratchet Retaining Pawl Adjust- ing Screw,for 23546

Feed Wheel Tripping Lever Point Screw Thread and Cord Cutter Actuating Slide

Support Screw

Shuttle Race Plate Screw,for 249929 Clamp Arm Bracket Guide (right) Screw Feed Han~ Ratchet Lever Pawl Point

Screw, for 39996

Knife Grinder Knife Stop Screw,for 39898

Thread Unwinder Thread Guide Rod Screw for 225324

Bed Frame Hinge Connection Cap Screw, for 19398

Face Plate Screw

Clamp Arm-Bracket Guide (left) Screw Cord Rotating Sector Catch Connection

Collar Set Screw,for 39777 Cord Rotating Sector Catch Spring

Screw

Knife Grinder Knife Holder Slide Bracket Adjusting Screw Tension Spring Screw,for 39898

Thread and Cord (upper) Cutting Blade Screw,for 39916 and 39923

Feed Wheel Tripping Point Screw,for 39792

No.

223D 226J 228F 229D 229D 229D 230F 233D 233D 233D 236F 237F 237F

240D 240D 240D 240D 3550 355C 3550 3560 3560 3560 3560 3610 3750 389D 389F 389F 399D 402D 402D

Plate 13589 17931 13587 13593 17932 17889 13592 13589 13590 13588 13585 13588 13588

17889 13594 13587 13592 18235 18235 18235 17903 17903 17903 17903 18235 17891 17897 17897 13592 18200 13586 13586

NUMERICAL LIST OF PARTS Na..11e

Clamp Carrier Slide Lever Regulator Cap Screw

Oscillating Shaft Crank Slide Block Cap Screw,for 15171

33

Thread (lower) Cutting Blade Friction Plate Screw

Clamp Lifting Arm Connection Roller Cap Screw,for 1901

Knife Bar Driving Lever (intermediate) Roller Cap Screw,for 1959

Needle Bar Frame Bell Crank Roller Cap Screw, for 1956

Cord Leading Finger (upper) Screw Clamp Carrier Regulator Stud Stop

Screw,for 39543

Feed Wheel Retaining Clutch Spring Screw

Thread an:l Cord (up;Jer) Cutting Blade Con.f1ecting Rod Latch Spring Screw Cord Leading Eye Screw

Clamp Check Section and Cutting Plate Screw,for 39914 and 39922

Thread and Cord (upper) Cutting Blade Cormecting Rod Collar Set Screw, for 40044

Barrine Ratchet Retaining Pawl Spring Screw

Cord Rotating Sector Catch Screw Thread (lower) Cutting Blade Sorew

" and Cord Cutter Actuating Slide Ratchet Spring Screw

Belt Idler Pulley Bracket Set Screw, for 228323

Belt Idler Pulley Bracket 'shaft Set Screw,for 228324

Belt Idler Pulley Shaft Set Screw,for 228323

Knee Starting Rock Sh'3.ft Connecting Rod Bracket Set Screw,for 6337 Knee Starting Rock Shaft Connecting

Rod Set Scre'W, for 6337

Knee Starting Rock Shaft Kn•3e .A.rm Hub Set Screw,for 2766

Knee Starting Rock Shaft ~1ee Plate Set Screw,for 2767

Belt Idler Belt Guide Set Screw,for 228321

Feed Connecting Rod (lower) Hinge Screw

Bobbin Winder Base Plate Screw Screw,for 27924 Cord Leading Bracket Screw

Shuttle Bobbin Case Position Plate Screw,for 249929

Clamp Arm Screw

n Plate Support ~crew