Form 20737
(454)
Printed in U. S, A.
LIST
OF
PARTS
SINGER
/AACHINE No. 44-91
n?".T.T?'.3t 52
THE SINGER MANUFACTURING COMPANY
From the library of: Superior Sewing Machine & Supply LLC
INSTRUCTIONS FOR OILIN6
To ensure easy running and prevent unnecessary wear of
the parts which are in movable contact, the machine requiresoiling, and when in continuous use, "TYPE B" or "TYPE D" OIL, sold by Singer Sewing Machine Company, should be applied at least twice each day to all oil holes marked "OIL",
as instructed in Form 19449.
"TYPE D" OIL should be used when an oil is desired
which will produce a minimum of stain on fabrics, even after a long period of storage.
Apply a few drops of oil to the shuttle bearings in the shuttle race each time a bobbin is replaced.
To Insure satisfactory results, *'TYPE E" Thread Lubricant, sold by Singer Sewing Machine Company, should be used in the thread lubricator which is attached to the top of
the machine.Copyright, U. S. A., 1941, 1942 and 1954 by The Singer Manufacturing Company
All lUghti Reserved for all Countries
INDEX
Page
Accessories 13
Belt Guard 13
Bobbin Winders 13
Foot Lifter Ports 15
Knee Lifter Ports 16
Machine No. 44-91 7
Numerical List of Parts 19
Thread Unwinder 17
INSTRUCTIONS FOR ORDERING
In ordering from this list/ use ONLY the part NUMBER in
the FIRST column.
The number stamped on a Sewing Machine Part is in every case the number of the single part only.
Every combination of parts sentout as such has its specific number, which, although not stamped on the parts, must be used when ordering the combination.
Each number always indicates the SAME PART in what ever list it appears, or for whatever machine.
The letters after some of the numbers indicate the style of finish only, as follows:
A—Hardened, Polished, Nickel Plated and Buffed
A.A—Buffed and Chromium PlatedA.B—Hardened, Polished, Buffed and Chromium Plated A.C—Brown Baking Enamel Finish
A.D—Gray Baking Enamel Finish
A.E—Hardened, Bright Rumbled and Nickel Plated
A.F—Hardened, Bright Rumbled, Nickel Plated, Bright Rumbled
and Chromium Plated A.G—Alumilite, Plain
A.H—Alumilite, Dyed
A.J—Polished, Nickel Plated and Chromium Plated
A.K—Hardened, Polished, Nickel Plated and Chromium Plated A.L—HeatTreated for Toughness
B—Polished, Nickel Plated and Buffed C—Hardened Only
C.R—Hardened and Merlized
D—Polished Only
E—Soft, Not Polished
F—Hardened and PolishedF.J—Hardened, Polished and Nickel Plated G—Bright Rumbled and Nickel Plated
H—Blued
J—Nickel Plated Only
K—Hardened and Nickel Plated L—Brass Plated
M—Oxidized
N—Japanned, Dull P—Japanned, Bright
P.P—Wrinkle FinishR—Merlized S—Cadmium Plated
T—Copper Plated
T.A—Hardened, Polished, Copperand Nickel Platedand Buffed T.B—Copper and Nickel Plated and Polished
T.J—Copper and Nickel Plated Only T.K—Hardened, Copper and Nickel Plated T.L—Copper and BrassPlated
T.M—Copper Platedand Oxidized
INSTRUCTIONS FOR ORDERING-Contlnued
U—Zinc Plated V—Silver Plated
W—Polished and Nickel Plated X—Black Oxide, for Iron and Steel
X.C—Hardened and Black Oxide, for Iron or Steel
Y—Black Nickel Plated Only
2—Chromium Plated
Z.A—Hardened, Polished, Nickel Plated, Buffed and Chromium Plated
Z.B—Polished, Nickel Plated, Buffed and Chromium Plated Z.C—Hardened and Chromium Plated
Z.D—Polished and Chromium Plated
Z.G—Bright Rumbled, Nickel Plated, Bright Rumbled and
Chromium Plated ZJ—Nickel and Chromium Plated
Z.T—Copperand Chromium Plated
These letters MUST BE USED when they appear in the
list; and AFTER the number as in the list.In this series:
1 to 1500, 50001 to 51500 and 140001 to 142000 are Screw Numbers
1501 to 1800 and 51501 to 51800 are Nut Numbers 1801 to 2000 and 51801 to 52000 are Roller Numbers 2001 to 50000 and 52001 to 140000 and 142001 to
190000 are Sewing Machine Parts, 190001 and upward
are numbers of Electrical Ports.
The figures in the second column refer only to the plates, illustrating the parts, and are NOT TO BE USED in ordering.
Parts marked with an asterisk (*) are furnished only when
repairs are made at factory.
SINGER Needles should be used in SINGER Machines These Needles and their Containers
are marked with the
Company's Trade Mark "SIMANCO.' ^'"' i
Needles in Containers marked
"FOR SINGER MACHINES"
are NOT SINGER made needles.
SINGER Needles should be used in SINGER Machines These Needles and their Containers
are marked with the
Company's Trade Mark "SIMANCO.**" i
Needles in Containers marked
"FOR SINGER MACHINES"
are NOT SINGER made needles. 2
LIST OF PARTS COMPLETE FOR
MACHINE No. 44-91
FOR LEATHER GLOVES OF EXTRA HEAVY WEIGHT. MAXIMUM STITCH LENGTH 5 TO THE INCH. ALTERNATING PRESSERS.
HIGH LIFT. SPEED 2200 DEPENDING ON MATERIAL USED AND OPERATIONS PERFORMED.
No. Plate Name
•62929 Arm
8582 22480 Arm Dowel Pin (2)
12453 22480 Arm Oil Tube, for oiling intermediate bearing
12454 22480 Arm Oil Tube with 132590, for oiling Thread Take-up Lever Link
24131 22480 Arm Oil Tube, with 52045, for oiling Feed and Feed Lifting Eccentric
11119 22480 Arm Oil Tube, with 52045, for oiling Thread Toke-up Lever and Needle Bar Crank (2)
52045 22480 Arm Oil Tube Pocking (wick) (3) 132590 22480 Arm Oil Tube Pocking (wick)
748E 22480 Arm Screw (bock) (2) 868E 22480 Arm Screw (front) (2) 16511 22481 Arm Shaft
62809 Arm Shaft 16511 with 20197, 20283,62637 and 127152....
12357 22481 Arm Shaft Flanged Bushing (back) 448AL 22481 Arm Shaft Flanged Bushing (back) Set Screw 144D 22481 Arm Shaft Screw
12193 22480 Arm Side Cover
51224J 22480 Arm Side Cover Thumb Screw
*62882 Bed
20197 22481 Crank Connecting Rod with 125044 and two 896AL 896AL 22481 Crank Connecting Rod Cop Screw (2)
908C 22481 Crank Connecting Rod Hinge Screw 1619J 22481 Crank Connecting Rod Hinge Screw Nut 125044 22481 Crank Connecting Rod Oil Pad (felt)
26803 22482 Edge Guide Bed with 2362 220J 22482 Edge Guide Leveling Screw (4)
8
No. Plate 121146 22482
26805 22482
207J 22482 2362 22482 26806 22482 207J 22482 233J 22482 26807 22482 94D 22482 51916 22482 26808 22482 26809 22482 12152 22482 26810 22462
190J 22482 19354 22480 44181 22480 12150
12152 22480 45874 22480 139615
125424 i22486
19355 22480 219J 22480 12368 22483 313C 22483 56813
1519J 22483 52165 22481 375C 22481 1518J 22481 62930 22482 206AL 22482 20283 22481 446AL 22481 127152 22481 20284 22481 375C 22481 1518J 22481 43993
24969 22483 12376 22483 157J 22483 1813 22483 24970
43976 22481 966E 22481 375C 22481 1518J 22481 125044 22481 307C 22483 56814
1513J 22483 3039 22481 56886
140139E 22481
PARTS FOR MACHINE No. 44-91 Name
Edge Guide Slide with 26809, 51916 and two 12152 Edge Guide Slide Cap (left)
Edge Guide Slide Cap (left) Screw Edge Guide Slide Cap (left) Steady Pin Edge Guide Slide Cap (right)
Edge Guide Slide Cap (right) Screw (large) Edge Guide Slide Cap (right) Screw (small) Edge Guide Slide Lever
Edge Guide Slide lever Hinge Screw Edge Guide Slide Roller and Stud Edge Guide Slide Spring Edge Guide Slide Spring Cover Edge Guide Slide Spring Cover Rivet (2)
Edge Guide (roller) complete, Nos. 940, 233J, 26803, 26805,26806,26807, 26808, 121146, two 207J and four 220J
Edge Guide Screw (2) Face Plate
Face Plate Threod Guard (lower)
Face Plole Thread Guard (lower) 44181 with 12152 Foce Plote Thread Guard (lower) Rivet
Face Plate Thread Guard (upper)
Face Plate Thread Guard (upper) 45874 with 125424 Face Plate Thread Guard (upper) Rivet
Face Plate complete, Nos. 12150, 19354 and 139615 Face Plate Screw (2)
Feed Bar
Feed Bar Screw Center (2)
Feed Bar Screw Center 313C with 1519J (2) Feed Bar Screw Center Nut (2)
Feed Connecting Link
Feed Connecting Link Hinge Screw (2) Feed Connecting Link Hinge Screw Nut (2) Feed Dog, 10 teeth (12 teeth to the inch) for 62936 Feed Dog Screw (2)
Feed and Feed Lifting Eccentric with 446AL Feed and Feed Lifting Eccentric Set Screw Feed and Feed Lifting Eccentric Sleeve Feed Forked Connection
Feed Forked Connection Hinge Screw Feed Forked Connection Hinge Screw Nut
Feed Forked Connection complete, Nos. 20284, 52165, 56886 and two each 375C and 1518J
Feed Lifting Rock Shaft..
Feed LiftingRock Shaft Cronk with 157J and 1813 Feed Lifting Rock Shaft Crank Clamping Screw Feed Lifting Rock Shaft Crank Roller and Stud
Feed Lifting Rock Shaft complete, Nos. 12376 and 24969....
Feed Lifting Rock Shaft Crank Connecting Rod with 125044 and two 966E
Feed LiftingRock Shaft Crank Connecting Rod Cop Screw (2) Feed Lifting Rock Shaft Crank Connecting Rod Hinge Screw Feed LiftingRock Shaft Crank Connecting Rod Hinge Screw
Nut
Feed Lifting Rock Shaft Crank Connecting Rod Oil Pad (felt)
Feed Lifting Rock Shoft Screw Center (2)
Feed Lifting Rock Shaft Screw Center 307C with 1513J (2)..
Feed Lifting Rock Shaft Screw Center Nut (2) Feed Reguiator
Feed Regulator 3039 with 818W Feed Regulator Hinge Screw
PARTS FOR MACHINE No. 44-91
No. Plate
139603 22481 818W 22481 16506 22483 62883
62884 22483 172J 22483 307C 22483 56814
1513J 22483 62885 22484 62886
20249 22484 134E 22484 24475 22484 171AL 22484 20251 22484 456AL 22484 62887 22484 172J 22484 62888 22484 50562C 22484 1520J 22484 62796 22484 62797 22485 62814
62798 22485 207J 22485 199J 22485 50562C 22485 1520J 22485 2049 22484 462AL 22484 12391 22485 19356 22485 19357 22485 199J 22485 24351 22485 19362 22481 62637
375C 22481 1518J 22481 2049 22485 19359 22485 19360 22485 24352
965D 22485 62799 22485 199J 22485 453AL 22485 62800
Name
Feed Regulator Hinge Screw Friction Washer Feed Regulator Thumb Screw
Feed Rock Shaft
Feed Rock Shaft 16506 with 62884 Feed Rock Shaft Crank with two 172J Feed Rock Shaft Crank Clamping Screw (2) Feed Rock Shaft Screw Center (2)
Feed Rock Shaft Screw Center 307C with 1513J (2) Feed Rock Shaft Screw Center Nut (2)
Feed (upper) Shaft
Feed (upper) Shaft 62885 with 2049 and 62796 Feed (upper) Shaft Bracket(back)...
Feed (upper) Shaft Bracket (back) Screw (2) Feed (upper) Shaft Bracket(front) Feed (upper) Shaft Bracket(front) Screw (3) Feed (upper) Shaft Collar with 456AL (2) Feed (upper) Shaft Collar Set Screw (2) Feed (upper) Shaft Crank (back) withtwo 172J Feed (upper) Shaft Crank (back) Clamping Screw (2) Feed (upper) Shaft Crank (back) Connecting Link Feed (upper) Shaft Crank (back) Connecting Link Hinge
Screw (2)
Feed (upper) Shaft Crank (back) ConnectingLink Hinge Screw Nut (2)
Feed (upper) Shaft Crank (front) with462AL Feed (upper) Shaft Crank (front)Connecting Link Feed (upper) Shaft Crank (front) Connecting Link 62797
with 199J and 62798
Feed (upper) Shaft Crank (front) Connecting Link Bracket...
Feed (upper) Shaft Crank (front)Connecting Link Bracket
Screw (2) ;...
Feed (upper) Shaft Crank (front) Connecting Link Cap
Screw
Feed (upper) Shaft Crank (front) Connecting Link Hinge
Screw
Feed (upper) Shaft Crank (front) Connecting Link Hinge
Screw Nut
Feed (upper) Shaft Crank (front) Pin Feed (upper) Shaft Crank (front) Set Screw Lifting Presser Bar
Lifting Presser Bar BellCrank
Lifting Presser Bar BellCrank Connecting Link
Lifting Presser Bar Beil Crank Connecting Link Cap Screw (2) LiftingPresser Bar BeliCrank Driving Arm
Lifting Presser Bar Bell Crank Driving Arm Eccentric
Connection
Lifting Presser Bar BellCrank Driving Arm Eccentric
Connection 19362 with 19365
LiftingPresser Bar Bell Crank Driving Arm Eccentric Connection Hinge Screw
Lifting Presser Bar BellCrank Driving Arm Eccentric Connection Hinge Screw Nut.
Lifting Presser Bar BellCrank Driving Arm Pin Lifting Presser Bar BeilCrank Driving Arm Shaft Lifting Presser Bar BeilCrank Driving Arm Shaft Bracket.
Lifting Presser Bar BellCrank Driving Arm Shaft Bracket complete, Nos. 2049,19359,19360 and 24351 Lifting Presser Bar BellCrank Driving Arm Shaft Bracket
Screw
Lifting Presser Bar Guide Bracket with 453AL Lifting Presser Bar Guide Bracket Cap Screw Lifting Presser Bar Guide Bracket Set Screw
Lifting Presser Bar Guide Bracket complete, Nos. 19356, 19357,62799,62805 and three 199J
10
No. Plate 24590 22485 175J 22485
20240 22485
689C 22485 1520J 22485 12327 22485 11167 22485 NOTE:
12139 20023
11170 22485 62931 22482 190J 22482 62924 22481 24297 22481 210J 22481 443AL 22481 19229 22485 12382 22485 43997
794E 22485 1904 22485 453AL 22485 12384 22485 19365 22481 743AL 22481 448AL 22481 936E 22485 24101 22485 808F 22485 24102 22485 651J 22485 24103
44222 22480 44223
44214 22480 44005
24075 22480 44006 22480 44224 22480 44225 22480 24104 22481 12388 22481 448AL 22481 4784 22481 24105
62813 22483 62932
62803 22483 453AL 22483 2049 22483 19448 22483 226J 22483 12424 22483 988C 22483 1518J
^OAAO
22483
PARTS FOR MACHINE No. 44-91 Name
lifting Presser Bar Guide Bracket Support Lifting Presser Bar Guide BracketSupport Screw (2) LiftingPresser Bar Lifter
Lifting Presser Bar Lifter Hinge Screw Lifting Presser Bar Lifter Hinge Screw Nut
LiftingPresser Bar Liftingand Releasing Lever Bracket LiftingPresser Bar Spring (light) .051 wire
No. 11167 is sent with this machine, unless another spring is specified on order.
LiftingPresser Bar Spring (medium) .055 wire Lifting Presser Bar Spring (heavy) .063 wire Lifting Presser Bar Spring Washer Lifting Presser Foot
LiftingPresser Foot Screw
Machine Driving Pulley (power) "V" belt groove (outside diam. of belt groove 2.9 in.) with two 443AL Machine Driving PulleyOil Cover
Machine Driving PulleyOil Cover Screw Machine Driving PulleySet Screw (2) Needle Bar (hollow)
Needle Bar Connecting Link with 794E Needle Bar Connecting Link 12382 with 12384 Needle Bar Connecting Link Adjusting Screw Needle BarConnecting Stud Roller (rolleronly) Needle Bar Connecting Stud Set Screw
Needle Bar Connecting Stud with 453AL ond 1904 Needle Bar Crank and Lifting Eccentric with 448AL and
743AL
Needle Bar Crank and Lifting Eccentric Position Screw Needle Bar Crank and Lifting EccentricSet Screw Needle Bar Screw Bushing (2)
Needle Clamp Body Needle Clomp Screw Needle Clamp Thread Guide Needle Clamp Thread Guide Screw
Needle Clamp complete, Nos. 651J, 808F, 24101 and 24102
Oil Cup
Oil Cup 44222 with 44005 Oil Cup Extension
Oil Cup Extension44214 with 24075 Oil Cup Extension Post
Oil Cup Packing (felt) Oil Cup Thread Retainer
Oil Cup complete, Nos. 44006, 44223 and 44224 Oscillating Rock Shaft
Oscillating Rock Shaft Hinge Pin Oscillating RockShaft Hinge Pin Set Screw Oscillating RockShaft Oil Pad (felt)
OscillatingRock Shaft complete Nos. 4784,12388 and 24104
Oscillating Shaft
Oscillating Shaft 62813 with 2049,62804 and 62933 Oscillating Shaft Crank
Oscillating Shaft Crank Set Screw (2) Oscillating Shaft Crank Pin Oscillating Shaft Crank Slide Block
Oscillating ShaftCrank SlideBlock Cap Screw Oscillating ShaftCrankSlide Block Cap Screw Washer Oscillating Shaft Crank Slide BlockScrew Stud Oscillating Shaft Crank Slide Block Screw Stud Nut Oscillating ShaftCrankSlideBlock complete, Nos. 226J,
988C, 12424 and 19448
PARTS FOR MACHINE No. 44-91 11 No. Plate
62804
688J 22485 2996 22486 15140 22486 2973 22486 2974 22486 2975 22486 592E 22486 15141
24412 22486 391J 22486 62740 22486 5462 22486 591F 22486 15278 22486 62928 22486 62933 22483 2049 22483 462AL 22483 2531 22486 2532 22486 2533 22486 907D 22486 24413 22486 62502
62517
24418 22486 1053E 22486 24419 22486
USE 22486
12431 22480 4307 22480 725J 22480 12432 22480 52046 22487 389J 22487 204296 22487 200079X 22487 52047 22487 1560C 22487 62934 22487 32572 22487 43944 22487 12398 22487 12329 22487 24737 22487 50108F 22487 2103 22487 12149 22487 5983 22487 5984 22487 5795 22487 62609
2102 22487 10148 22487 828C 22487 42418
1560C 22487 62935 22487
Name
Oscillating Shaft Crank complete, Nos. 1518J, 19449, 62803 and two 453AL
Pressure Regulating Thumb Screw Shuttle Bobbin (2)
Shuttle Bobbin Case Latch Shuttle Bobbin Case Latch Lever
Shuttle Bobbin Case Latch Lever Fulcrum Pin Shuttle Bobbin Case Latch Spring
Shuttle Bobbin Case Latch Stop Screw
Shuttle Bobbin Case Hinge, Nos. 2973, 2974 and 15140 Shuttle Bobbin Case Position Plate
Shuttle Bobbin Case Position Plate Screw (2) Shuttle Bobbin Case Nos. 592E, 2975 and 15141 Shuttle Body
Shuffle Tension Regulating Screw Shuttle Tension Spring
• Shuttle 1-11/16 in. diom., Nos. 2996, 5462 and 62740 Shuttle Driver with two 462AL
Shuttle Driver Pin Shuttle Driver Set Screw Shuttle Race Back
Shuttle Race Bock Position Pin (2) Shuttle Race Back Spring Shuttle Race Back Spring Screw Shuttle Race Body
Shuttle Race Body 24413 with 24418 and two 1053E Shuffle Race Body 62502 with two 2532
Shuttle Race Cap Shuttle Race Cap Screw (2)
Shuttle Race complete, Nos. 907D, 2531, 2533, 24412, 62517 and two 391J
Shuttle Race Screw (2) Shuttle Race Slide Shuttle Race Slide Spring Shuttle Race Slide Spring Screw (2)
Shuttle Race Slide complete, Nos. 4307, 12431 and two 725J
Spool Holder Base Spool Holder Base Screw Spool Holder Wire
Spool Holder Wire Hinge Screw
Spool Holder complete, Nos. 52046, 200079X and 204296.
Tension Regulating Thumb Nut Tension Releoser
Tension Releasing Disc Tension Releasing Lever Tension Releasing Lever Hinge Pin Tension Releasing Lever Spring Tension Releasing Pin Tension Screw Stud Tension Spring Tension Thread Guard Tension Washer (felt) (2) Tension Washer (steel) Tension Wheel
Tension complete, Nos. 1560C, 2103, 5795, 5984, 24738, 24942, 32572, 50108F and two 5983
Tension (thread retaining) Disc (2) Tension (threod retaining) Spring Tension (thread retaining) Screw Stud
Tesnion (thread retaining) Screw Stud 828C widi 1560C Tension (thread retaining) Screw Stud Nut
Tension (thread retaining) complete, Nos. 10148, 42418
and two 2102
12
No. Plate
57076 22487 38205 22487 52027 22487 52454 22487 624AL 22487 12404 22485 3094 22481 690E 22481 12408 22485 775E 22485 12166 22485 12409 22485 11204 22485 435AL 22485 12410
24738 22487 24942 22487 446AL 22487 43990
62936 22482 691AL 22482 62805 22485 19367 22485 199J 22485 219J 22485 50385C 22485 62806 22485 335J 22485 1695J 22485 62937 22482 217J 22482 62918
PARTS FOR MACHINE No. 44-R1 Nome
Tension (thread retaining) Thread Guide Tension (thread retaining) Screw Stud Washer Thread Guard (side of arm)
Thread Retainer Thread Retainer Set Screw Thread Take-up Crank Thread Take-up Crank Wedge Thread Toke-up Crank Wedge Screw Thread Take-up Lever
Thread Take-up LeverCap Screw Thread Take-up Lever Hinge Pin Thread Take-up LeverLink Thread Take-up LeverLink Hinge Pin Thread Take-up LeverLink Hinge Pin Set Screw Thread Take-up Levercomplete, Nos. 12166,12408 and
12409
Thread Take-up Spring Thread Take-up Spring Regulator Thread Take-up Spring Regulator Set Screw Thread Take-up complete, Nos. 775E, 11204,12404,
12410 and 43997 Throat Plate for 62930 Throat Plate Screw (2) Vibrating Presser Bar Vibrating Presser Bar Cap
Vibrating Presser Bar Cap Screw for 62805 Vibrating Presser Bar Cap Screw for 19367 Vibrating Presser Bar Tension Screw Vibrating Presser Bar Tension Screw Bracket
Vibrating Presser Bar Tension Screw BracketScrew (2)....
Vibrating Presser Bar Tension Screw LockNut Vibrating Presser Foot
Vibrating Presser Foot Screw Drip Pan with four 1 in. wire nails
13
ACCESSORIES
No. Plate Name
12361 24059 Machine Hinge Connection (2) 41400 24059 Machine Rest Pin (wood) 3-1 /8 in. long 120342 24059 Oiler (copper plated) with 120343
120343 24059 Oiler Spout,3-1/2 in. long
26026 24059 Screw Driver (machine) 26485 24059 Screw Driver (shuttle tension)
8909 24059 Wrench for 1513 and 1518 8908 24059 Wrench for 1519 and 1520 19221 24059 Wrench for 936 and 1619
4822 24059 Wrench for 1521
41929 8418 8419 8420 41930 41931
22343 22343 22343
22343 22343
BELT GUARD Belt Guard
Belt Guard Button
Belt Guard Button Washer (leather)
Belt Guard Button 8418 with 8419 and wood screw 1-1/4 in. No. 9 R.H.B
Belt Guard Hinge (2)
BeltGuard complete, Nos. 8420,41929, two 41930 and four wood screws 3/4 in. No. 9
BOBBIN WINDERS
BOBBIN WINDER
(Swinging Automatic Right Hand)
FOR POWER TABLE FOR "V" BELT DRIVE 259428 23253 Brake (leather)
259429 23253 Broke Clomp 2C0n3F 23253 Brake Clomp Screw
259662 23253 Bobbin Winder and Tension Bracket Base.
225453 23253 Frame with 202277 and 259660 225454 23253 Frame Hinge Pin
202277 23253 Frame Oil Packing (wick) 259660 23253 Frame Oil Well Washer 225455 23253 Frame Spring 225456 23253 Frame Spring Plunger 259461 23253 Pulleywith 200380C 200380C 23253 Pulley Set Screw
225381 23253 Spindle
225444 23253 Stop Latch 200056E 23253 Stop LatchScrew 225458 23253 Stop LatchThumbLever 225459 23253 Stop Latch Thumb LeverHinge Stud 225459 23253 Stop Latch Thumb Lever Joint Stud 202478 23253 Stop Latch Trip Lever
200299B 23253 Stop LatchTrip LeverHinge Screw
225461 23253 Tension Bracket with 201499B 200082D 23253 Tension Bracket Screw 228026 23253 Tension Bracket Screw Washer
2102 23253 Tension Disc (2)
14 BOBBIN WINDERS
No. Plate Name
13710 23253 Tension Spring 201499B 23253 Tension Stud
201572B 23253 Tension Stud Thumb Nut
225462 23253 Tension Bracket complete, Nos. 13710, 201572B, 225461
and two 2102
259462 23253 Bobbin Windercomplete,for "V" belt, Nos.200056E, 200082D,200113F, 200299B, 202478, 225381,225444, 225453, 225454,225455, 225456,225458, 225462, 228026,259428,259429, 259461, 259662 and two each 225459 and wood screws 3/4 in. No. 12 R.H
BOBBIN WINDER (Swinging Automatic Right Hand)
FOR POWER TABLE FOR ROUND BELT
259428 23253 Broke (leather) 259429 23253 Brake Clamp 200113F 23253 BrakeClampScrew
259430 23253 Bobbin Winder and Tension Bracket Base 225453 23253 Frame with 202277 and 259660 225454 23253 Frame Hinge Pin
202277 23253 Frame Oil Packing (wick) 259660 23253 Frame Oil Well Washer 225455 23253 Frame Spring 225456 23253 Frame Spring Plunger 225368 23253 Pulley with 200380C 2C0380C 23253 PulleySet Screw
225381 23253 Spindle
225444 23253 Stop Latch 200056E 23253 Stop Latch Screw 225458 23253 Stop Latch ThumbLever
225459 23253 Stop Latch Thumb Lever HingeStud 225459 23253 Stop Latch ThumbLeverJoint Stud 202478 23253 Stop Latch TripLever
200299B 23253 Stop Latch TripLever Hinge Screw 225461 23253 Tension Bracket with 201499B 200082D 23253 Tension Bracket Screw 228026 23253 Tension Bracket Screw Washer
2102 23253 Tension Disc(2) 13710 23253 Tension Spring 201499B 23253 Tension Stud
201572B 23253 Tension Stud Thumb Nut
225462 23253 Bobbin Winder Tension Bracket complete, Nos. 13710,
201572B, 225461 and two 2102
259431 23253 Bobbin Winder complete, Nos. 200056E, 200082D, 200113F, 200299B, 202478, 225368, 225381,225444, 225453, 225454,225455, 225456, 225458, 225462, 228026, 259428, 259429, 259430 and two each 225459 and wood screws 3/4 in. No. 12 R.H.B
15
FOOT LIFTER PARTS
No. Plate Name
5596 22483 Bell Crank
56848 Bell Crank 5596 with 5599 and 5601 5599 22483 Bell Crank Bracket
178E 22483 Bell Crank Bracket Screw (2) 5601 22483 Bell Crank Hinge Pin 5735 22483 Bell Crank Spring
5598 22483 Bell Crank complete, Nos. 5735 and 56848 5670 22488 Chain, length 26 in. to 35 in. with 56864 and 56865
NOTE: When ordering No. 5670, state length required.
4879 22488 Chain Connecting Link 56864 22488 Chain Hook (large) 56865 22488 Chain Hook (small) 62938 22483 Lifting Lever with 448AL 12415 22483 Lifting Lever Connecting Rod 12416 22483 Lifting Lever Connecting Rod Joint
76D 22483 LiftingLever Connecting Rod Joint Hinge Screw 1521J 22483 Lifting Lever Connecting Rod Lock Nut
802X 22483 Lifting Lever Hinge Screw 21301 22485 LiftingLever Link
766E 22485 Lifting Lever LinkHinge Screw 19372 22483 Lifting Lever Pin
448AL 22483 Lifting Lever Pin Set Screw 2763 22489 Rock Shaft
12242 22489 Rock Shaft Hanger with two wood screws 1 in. No. 10 (2)....
6337 22489 Rock Shaft Lifting Bracket with two 356C (2) 12243 22489 Rock Shaft Lifting Bracket Hook (Bell Crank end)
7125 22489 Rock Shaft Lifting Bracket Hook (Chain end) 356C 22489 Rock Shaft Lifting Brocket Hook Set Screw (2) 356C 22489 Rock Shaft Lifting Bracket Set Screw (2) 2770 22489 RockShaft Stop Dog with 140219C
140219C 22489 Rock Shaft Stop Dog Set Screw
4880 22489 RockShaft complete, Nos. 2763, 2770,7125, 12243 and two each 6337 and 12242
4881 22488 Treadle 4882 22488 Treadle Shaft 4883 22488 Treadle Spring
4884 22488 Treadle Stand
4885 22488 Treadle complete, Nos. 4879, 4881, 4882,4883, 4884
and two wood screws 1 in. No. 16
62939 Foot Liftercomplete, Nos. 76D, 766E, 802X, 1521J, 4880,
16
KNEE LIFTER PARTS
No. Plate Name
5596 22483 Bell Crank
56848 Bell Crank 5596 with 5599 and 5601 5599 22483 Bell Crank Bracket
178E 22483 Bell Crank Bracket Screw (2) 5601 22483 BellCrank Hinge Pin 5735 22483 BellCrank Spring
5598 22483 Bell Crank complete, Nos. 5735 and 56848 62938 22483 LiftingLeverwith 448AL
12415 22483 Lifting LeverConnecting Rod 12416 22483 Lifting LeverConnecting Rod Joint
76D 22483 Lifting LeverConnecting RodJoint Hinge Screw 1521J 22483 Lifting LeverConnecting Rod Lock Nut
802X 22483 LiftingLever Hinge Screw 21301 22485 Lifting LeverLink
766E 22485 Lifting Lever Link Hinge Screw 19372 22483 Lifting LeverPin
448AL 22483 Lifting Lever Pin Set Screw 2763 22489 Rock Shaft
139633 RockShaft 2763 with 2770,6337 and 139623
127312 22489 Rock Shaft Hanger (back) with two wood screws 1 in. No.
10
12242 22489 Rock Shaft Hanger (front)withtwo wood screws1 in. No.
10
2765 22489 Rock Shaft Knee Arm
2766 22489 Rock Shaft Knee Arm Hub with 356C 356C 22489 RockShaft Knee Arm Hub Set Screw 1509E 22489 RockShaft Knee Arm Hob LockNut
2768 Rock Shaft Knee Arm complete, Nos. 2765,2766 and 2767 2767 22489 Rock Shaft Knee Plate with 356C
356C 22489 Rock Shaft Knee Plate Set Screw 6337 22489 Rock Shaft Lifting Bracket with two 356C 139623 22489 Rock Shaft Lifting BracketHook
356C 22489 Rock Shaft Lifting BracketHookSet Screw 356C 22489 Rock Shaft Lifting BracketSet Screw 2770 22489 Rock Shaft Stop Dog with 140219C 140219C 22489 Rock ShaftStop DogSetScrew
139624 22489 Rock Shaft complete, Nos. 2768, 12242,127312and
139633
THREAD UNWINDER
FOR ONE LARGE SPOOL OR ONE LARGE CONE OF THREAD 17
No. Plate 228692 22490 201528X 22490 228693 22490 225259 22490 150203 22490 225388 22490 200383C 22490 201018C 22490 259658 22490 225391 22490 201696J 22490 225326 22490 225324 22490 208AL 22490 225322 22490 225260 22490
27739 22490 225390 22490 NOTE:
Name
Spool Pin Spool Pin Not Spool Pin Washer
Spool Restwith 201018C, 201528X,228692 and 228693....
Spool RestCushion (felt) Spool RestRod Spool RestRodSet Screw Spool RestSet Screw Spool Stand with 200383C Thread Guide
Thread Guide Lock Nut.
Thread Guide PositionCup
Thread Guide Rod with 208AL and 225322 Thread Guide Rod Screw
Thread Guide Rod Washer
Thread Unwinder complete, Nos. 150203, 201696J, 225259,225324, 225326,225388, 225391, 259658 and three wood screws 7/8 in. No. 12
Thread Cone (wood) for large cones Thread Cone Holder, for inverted cones
Nos. 27739 and 225390 are used with, but not included in 225260.
19
NUMERICAL LIST OF PARTS
No. Plate 76D 22483 76D 22483 94D 22482 134E 22484 144D 22481 USE 22486 157J 22483 171AL 22484 172J 22483 172J 22484 175J 22485 178E 22483 178E 22483 190J 22482 190J 22482 199J 22485 199J 22485 199J 22485 199J 22485 207J 22482 207J 22482 207J 22485 208AL 22482 208AL 22490 210J 22481 217J 22482 219J 22480 219J 22485 220J 22482 226J 22483 233J 22482 307C 22483 307C 22483 313C 22483 335J 22485 356C 22489 356C 22489 356C 22489 356C 22469 356C 22489 356C 22489 375C 22481 375C 22481 375C 22481 375C 22481 389J 22487 391J 22486 435AL 22485 443AL 22481 446AL 22481 446AI 22487 448AL 22481
Name
Foot Litter Lifting Lever Connecting Rod Joint Hinge Screw for 62939
Knee Lifter Lifting Lever Connecting Rod Joint Hinge Screw Edge Guide Slide Lever Hinge Screw for 26810
Feed (upper) Shaft Bracket (back) Screw
Arm Shaft Screw Shuttle Race Screw
Feed Lifting Rock Shaft Crank ClampingScrew for 12376...
Feed (upper) Shaft Bracket (front) Screw Feed Rock Shaft Crank Clamping Screw for 62884 Feed (upper) Shaft Crank (back) ClampingScrewfor
62887
Lifting Presser Bar Guide Bracket Support Screw Foot Lifter Bell Crank Bracket Screw for 62939 Knee Lifter Bell Crank Bracket Screw Edge Guide Screw
Lifting Presser Foot Screw
Feed (upper) Shaft Crank (front)Connecting Link Cap Screw for 62814
Lifting PresserBar Bell Crank Connecting Link Cap Screw for 62800
Lifting Presser Bar Guide Bracket Cap Screw for 62800 Vibrating Presser Bar Cap Screw for 62805
Edge Guide Slide Cop (left) Screw for 26810 Edge Guide Slide Cap (right) Screw (large) for 26810 Feed (upper) Shaft Crank (front) Connecting Link Brocket
Screw Feed Dog Screw
Thread Unwinder Threod Guide Rod Screw for 225324 Machine Driving Pulley Oil Cover Screw
Vibrating Presser Foot Screw Face Plote Screw
Vibrating Presser Bar Cap Screw for 19367 Edge Guide Leveling Screw for 26610
Oscillating Shaft Crank SlideBlock Cop Screw for 19449...
Edge Guide Slide Cap (right) Screw (small) for 26810 Feed Lifting Rock Shaft Screw Center for 56614 Feed Rock Shaft Screw Center for 56814 Feed Bar Screw Center for 56813
Vibrating Presser Bar Tension Screw Brocket Screw Foot Lifter Rock Shaft Lifting Bracket Hook Set Screw for
6337
Foot Lifter Rock Shoft Lifting Brocket Set Screw for 6337 Knee Lifter Rock Shaft Knee Arm Hub Set Screw for 2766....
Knee Lifter Rock Shaft Knee Plate Set Screw for 2767 Knee Lifter RockShoft Lifting Bracket Hook Set Screw for
6337
Knee LifterRock Shaft Lifting Bracket Set Screw for 6337....
Feed Connecting LinkHinge Screw for 43993 Feed Forked Connection Hinge Screw
Feed Lifting Rock Shaft Crank Connecting Rod Hinge Screw
Lifting Presser Bar BellCrank Driving Arm Eccentric Connection Hinge Screw
Spool Holder Base Screw
Shuttle Bobbin Case Position Plote Screw for 24419 Thread Take-up Lever Link Hinge Pin Set Screw Machine Driving Pulley Set Screw for 62924 Feed and Feed Lifting Eccentric Set Screw for 20283 Thread Take-up Spring Regulator Set Screw Arm Shaft Flanged Bushing (back) Set Screw
20
No. Plate 448AL 22483 448AL 22483 448AL 22481 448AL 22481 453AL 22485 453AL 22485 453AL 22483 456AL 22484 462AL 22484 462AL 22483 591F 22486 592E 22486 624AL 22487 651J 22485 688J 22485 689C 22485 690E 22481 691AL 22482 725J 22480 743AL 22481 748E 22480 766E 22485 766E 22485 775E 22485 794E 22485 802X 22483 802X 22483 808F 22485 818W 22481 828C 22487 868E 22480 896AL 22481 907D 22486 908C 22481 936E 22485 965D 22485 966E 22481 988C 22483 1053E 22486 1509E 22489 1513J 22483 1513J 22483 1518J 22481 1518J 22481 1518J 22481 1518J 22481 1518J 22483 1519J 22483 1520J 22484 1520J 22485 1520J 22485 1521J 22483 1521J 22483
NUMERICAL LIST OP PARTS Name
Foot LifterLifting Lever PinSet Screw for 62938 Knee LifterLifting Lever PinSet Screw for 62938 Needle Bar Crank and Lifting EccentricSet Screw for
19365
Oscillating Rock Shaft Hinge Pin Set Screw Lifting Presser Bar Guide Bracket Set Screw for 62799 Needle Bar Connecting Stud Set Screw for 12384 Oscillating Shaft Crank Set Screw for 62804 Feed (upper) Shaft Collar Set Screwfor 20251 Feed (upper) Shaft Crank (front) Set Screw for 62796 Shuttle Driver Set Screw for 62933
Shuttle Tension Regulating Screw
Shuttle Bobbin Cose LatchStop Screw for 62740
Thread Retoiner Set Screw
Needle Clamp Thread Guide Screw for 24103 Pressure Regulating Thumb Screw
Lifting Presser Bar Lifter Hinge Screw Thread Take-up Crank Wedge Screw
Throat Plate Screw
Shuttle Race Slide Spring Screw for 12432
Needle Bar Crank and Lifting Eccentric Position Screw for 19365
Arm Screw (bock)
Foot LifterLifting lever Link Hinge Screw for 62939 Knee Lifter Lifting Lever LinkHinge Screw Thread Take-up LeverCap Screw for 43990
Needle Bar Connecting Link AdjustingScrew for 12382 Foot LifterLifting Lever Hinge Screw for 62939 Knee LifterLiftingLever Hinge Screw Needle Clamp Screw for 24103 Feed Regulator Thumb Screw for 56886 Tension (thread retaining) Screw Stud for 42418 Arm Screw (front)
Crank Connecting Rod Cop Screw for 20197 Shuttle Race Back Spring Screw for 24419 Crank Connecting Rod Hinge Screw Needle Bar Screw Bushing
Lifting PresserBar BellCrank Driving ArmShaft Bracket
Screw
Feed Lifting Rock Shaft Crank Connecting RodCop
Screw for 43976
OscillatingShaft Crank Slide Block Screw Stud for 19449..
Shuttle Race Cop Screw for 62502
Knee Lifter Rock Shaft Knee Arm Hub Lock Nut Feed Lifting RockShaft Screw Center Nut for 56814 Feed Rock Shaft Screw Center Nut for 56814 Feed Connecting Link Hinge Screw Nut for 43993 Feed Forked Connection Hinge Screw Nut.
Feed Lifting Rock Shaft Crank Connecting Rod Hinge
Screw Nut
LiftingPresser Bar BellCrank Driving Arm Eccentric Connection Hinge Screw Nut
Oscillating Shaft Crank Slide BlockScrew Stud Nut for
62804
Feed Bar Screw Center Nut for 56813
Feed (upper) Shaft Crank (back) Connecting Link Hinge
Screw Nut
Feed (upper) Shaft Crank (front) Connecting Link Hinge
Screw Nut
LiftingPresser Bar Lifter Hinge Screw Nut Foot LifterLifting LeverConnecting Rod Lock Nut for
62939
Knee LifterLifting Lever Connecting Rod Lock Nut
No. Plate 1560C 22487 1560C 22487 1619J 22481 1695J 22485 1813 22483 1904 22485 2049 22484 2049 22485 2049 22483 2049 22483 2102 22487 2102 23253 2103 22487 2362 22482 2531 22486 2532 22486 2533 22486 2763 22489 2763 22489 2765 22489 2766 22489 2767 22489 2768
2770 22489 2770 22489 2973 22486 2974 22486 2975 22486 2996 22486 3039 22481 3094 22481 4307 22480 4784 22481 4822 24059 4879 22488 4880 22489 4881 22488 4882 22488 4883 22488 4884 22488 4885 22488 5462 22486 5596 22483 5596 22483 5598 22483 5598 22483 5599 22483 5599 22483 5601 22483 5601 22483 5670 22488 NOTE;
5735 22483 5735 22483 5795 22487 5983 22487 5984 22487
NUMERICAL LIST OP PARTS 21
Name
Tension Regulating Thumb Nut for 62609
Tension (thread retaining) Screw Stud Nut for 42418 Crank Connecting Rod Hinge Screw Nut
Vibrating Presser Bar Tension Screw Lock Nut
Feed Lifting Rock Shoft Crank Roller and Stud for 12376....
Needle Bar Connecting Stud Roller(roller only) for 12384..
Feed (upper) Shaft Crank (front) Pin for 62886 Lifting Presser Bar BellCrank Driving Arm Pin for 24352 Oscillating Shaft Crank Pin for 62932
Shuttle Driver Pin
Tension (thread retaining) Disc for 62935 Tension Disc for 225462
Tension Spring for 62609
Edge Guide Slide Cap (left) Steady Pinfor 26803
Shuttle Race Back for 24419
Shuttle Race Back Position Pin for 62517 Shuttle Race Back Spring for 24419
Foot Lifter Rock Shaft for 4880 Knee Lifter Rock Shaft for 139633 Knee Lifter Rock Shaft Knee Arm for 2768
Knee Lifter Rock Shaft Knee Arm Hub with 356C, for 2768..
Knee Lifter Rock Shaft Knee Plate with 356C, for 2768 Knee LifterRockShaft Knee Arm complete, for 139624,
Nos. 2765,2766 and 2767
Foot Lifter Rock Shaft Stop Dog with 140219C, for 4880 Knee LifterRock Shaft Stop Dog with 140219C, for
139633
Shuttle Bobbin Case Latch Lever for 15141
Shuttle Bobbin Cose Latch Lever Fulcrum Pin for 15141 Shuttle BobbinCase LatchSpring for 62740
Shuttle Bobbin for 62928 Feed Regulator for 56886 Thread Take-up Crank Wedge Shuttle Race Slide Spring for 12432 Oscillating RockShaft Oil Pad (felt) for 24105 Wrench for 1521 (Accessories)
Foot Lifter Chain Connecting Linkfor 4885
Foot Lifter RockShaft complete, for 62939, Nos. 2763, 2770,7125,12243 and two each 6337 and 12242 Foot Lifter Treadle for 4885
Foot Lifter Treadle Shaft for 4885 Foot Lifter Treadle Spring for 4885
Foot Lifter Treadle Stand for 4885
Foot LifterTreadle complete, for 62939, Nos. 4879,4881, 4882,4883,4884 and two wood screws 1 in. No. 16 Shuttle Body for 62928
Foot Lifter Bell Crank for 56848 Knee Lifter Bell Crank for 56848
Foot LifterBellCrank complete, for 62939, Nos. 5735
and 56848
Knee LifterBellCrank complete, Nos. 5735 and 56848
Foot Lifter Bell Crank Bracket for 56848 Knee Lifter Bell Crank Bracket for 56848 Foot Lifter Bell Crank Hinge Pin for 56848 Knee LifterBell Crank Hinge Pin for 56848
Foot Lifter Chain, length 26 in. to 35 in. with 56864 and 56865, for 62939
When ordering No. 5670, state length required.
Foot Lifter BellCrank Spring for 5598 Knee LifterBell Crank Spring for 5598
Tension Wheel for 62609 Tension Washer (felt) for 62609 Tension Washer (steel) for 62609
22
No. Plate 6337 22489 6337 22489 7125 22489 8418 22343 8419 22343 8420
8582 22480 8908 24059 8909 24059 10148 22487 11119 22480 11167 22485 NOTE:
11170 22485 11204 22485 12139
12149 22487 12150
12152 22482 12152 22480 12166 22485 12193 22480 12242 22489 12242 22489 12243 22489 12327 22485 12329 22487 12357 22481 12361 24059 12368 22483 12376 22483 12382 22485 12384 22485 12388 22481 12391 22485 12398 22487 12404 22485 12408 22485 12409 22485 12410
12415 22483 12415 22483 12416 22483 12416 22483 12424 22483 12431 22480 12432 22480 12453 22480
NUMERICAL LIST OF PARTS Name
Foot LifterRockShaft Lifting Bracket with two 356C, for
4880
Knee LifterRockShaft Lifting Bracket with two 356C, for
139633
Foot Lifter Rock Shaft Lifting Bracket Hook (Chain End) for 4880
Belt Guard Button for 8420
Belt Guard Button Washer (leather) for 8420 Belt Guard Button 8418 with 8419, and wood screw
1-1/4 in. No. 9 R.H.B.,for 41931 Arm Dowel Pin
Wrench for 1519 and 1520 (Accessories) Wrench for 1513 and 1518 (Accessories) Tension(thread retaining) Spring for 62935
Arm Oil Tube with 52045, for oiling Thread Take-up Lever and Needle Bar Crank
LiftingPresser Bar Spring (light) .051 wire
No. 11167 is sent with this machine unless another spring is specified on order.
Lifting Presser Bar Spring Washer
Thread Take-up LeverLink Hinge Pinfor 43990 Lifting Presser Bar Spring (medium) .055 wire Tension Thread Guard
Face Plate Thread Guard (lower) 44181 with 12152, for 19355
Edge Guide Slide Spring Cover Rivet for 121146 Face Plate Thread Guard (lower) Rivet, for 12150...
Thread Toke-up LeverHinge Pin for 12410 Arm Side Cover
Foot Lifter Rock Shaft Hanger with two wood screws 1 in.
No. 10, for 4880
Knee Lifter RockShaft Hanger (front) with two wood screws 1 in. No 10, for 139624
Foot Lifter Rock Shaft Lifting Bracket Hook (Bell Crank End) for 4880
LiftingPresser Bar Lifting and Releasing Lever Bracket Tension Releasing LeverSpring
Arm Shaft Flanged Bushing (back) Machine Hinge Connection (Accessories) Feed Bar
Feed Lifting RockShaft Crank with 157J and 1813, for 24970
Needle Bar Connecting Link with 794E, for 43997 Needle Bar Connecting Stud with 453AL and 1904, for
43997
Oscillating RockShaft Hinge Pin for 24105 Lifting Presser Bar
Tension Releasing Lever Hinge Pin Thread Take-up Crank for 43990 Thread Take-up Lever for 12410 Thread Take-up LeverLink for 12410
Thread Take-up Levercomplete, for 43990, Nos. 12166, 12408 and 12409
Foot LifterLiftingLever Connecting Rod for 62939 Knee LifterLiftingLever Connecting Rod
Foot Lifter Lifting Lever Connecting Rod Joint for 62939 Knee Lifter Lifting LeverConnecting Rod Joint OscillatingShaft Crank Slide Block Cap ScrewWasher
for 19449
Shuttle Race Slide for 12432
Shuttle Race Slide complete, Nos. 4307,12431 and two 725J
Arm Oil Tube, for oiling intermediate bearing
No. Plate 12454 22480 13710 23253 15140 22486 15141
15278 22486 16506 22483 16511 22481 19221 24059 19229 22485 19354 22480 19355 22480 19356 22485 19357 22485 19359 22485 19360 22485 19362 22481 19365 22481 19367 22485 19372 22483 19372 22483 19448 22483 19449
20023
20197 22481 20240 22485 20249 22484 20251 22484 20283 22481 20284 22481 21301 22485 21301 22485 24075 22480 24101 22485 24102 22485 24103
24104 22481 24105
24131 22480 24297 22481 24351 22485 24352
24412 22486 24413 22486 24418 22486 24419 22486 24475 22484 24590 22485 24737 22487 24738 22487 24942 22487 24969 22483
NUMERICAL LIST OF PARTS 23
Name
Arm Oil Tube with 132590, for oiling Thread Take-up Lever Link
BobbinWinder TensionSpring for 225452
Shuttle Bobbin Case Latch for 15141
Shuttle Bobbin Cose Hinge, Nos. 2973,2974 and 15140,
for 62740
Shuttle Tension Spring Feed Rock Shaft for 62883 Arm Shaft for 62809
Wrench for 936 and 1619 (Accessories) Needle Bar (hollow)
Face Plate for 19355
Face Plate complete, Nos. 12150,19354 and 139615 Lifting Presser Bar Bell Crank for 62800
Lifting Presser Bar Bell Crank Connecting Linkfor 62800 Lifting Presser Bar Bell Crank Driving Arm Shaft for 24352..
Lifting Presser Bar BellCrank Driving Arm Shaft Bracket
for 24352
Lifting Presser Bar BellCrank Driving Arm Eccentric Connection for 62637
Needle Bar Crank and LiftingEccentric with 448AL and 743AL, for 62637
Vibrating Presser BarCap
Foot Lifter Lifting Lever Pin for 62939 Knee Lifter Lifting Lever Pin
Oscillating Shaft Crank Slide Block for 19449 Oscillating Shaft Crank Slide Blockcomplete for 62804,
Nos. 226J, 988C, 12424 and 19448 Lifting Presser Bar Spring (heavy) .063 wire
Crank Connecting Rod with 125044 and two 896AL, for 62809
Lifting Presser Bar Lifter Feed (upper) Shaft Bracket(back) Feed (upper) Shaft Collar with 456AL
Feed and Feed Lifting Eccentric with 446AL,for 62809 Feed Forked Connection for 43993
Foot Lifter Lifting Lever Linkfor 62939 Knee Lifter Lifting Lever Link Oil Cup ExtensionPost for 44005 Needle Clamp Body for 24103 Needle Clamp Thread Guide for 24103
Needle Clamp complete, Nos. 651J, 808F, 24101 and 24102
Oscillating Rock Shaft for 24105
Oscillating Rock Shaft complete, Nos. 4784, 12388 and
24104
Arm Oil Tube with 52045, for oiling Feed and Feed Lifting Eccentric
Machine Driving Pulley Oil Cover
Lifting Presser Bar Bell Crank Driving Arm for 24352 Lifting Presser Bar Bell Crank Driving Arm Shaft Bracket
complete, Nos. 2049,19359,19360 and 24351
Shuttle Bobbin Case Position Plate for 24419
Shuttle Race Body for 62502 Shuttle Race Cap for 62502
Shuttle Race complete, Nos. 907D, 2531, 2533, 24412, 62517 and two 391J
Feed (upper) Shaft Bracket(front) Lifting Presser Bar Guide Bracket Support Tension Releasing Pin
Thread Take-up Spring for 62609 Thread Take-up Spring Regulator for 62609 Feed Lifting Rock Shaft for 24970
24
No. Plote 24970
26026 24059 26485 24059 26803 22482 26805 22482 26806 22482 26807 22482 26808 22482 26809 22482 26810 22482
27739 22490 NOTE:
32572 22487 38205 22487 41400 24059 41929 22343 41930 22343 41931 22343 42418
43944 22487 43976 22481 43990
43993 43997 44005
44006 22480 44181 22480 44214 22480 44222 22480 44223
44224 22480 44225 22480 45874 22480 50108F 22487 50385C 22485 50562C 22484 50562C 22485 51224J 22480 51916 22482 52027 22487 52045 22480 52046 22487 52047 22487 52165 22481 52454 22487 56813
56814 56814 56848 56848
56864 22488 56865 22488 56886
57076 22487
numerical list op parts Name
Feed Lifting Rock Shaft complete, Nos. 12376 and 24969....
Screw Driver (machine) Accessaries Screw Driver (shuttle tension) Accessories Edge Guide Bed with 2362, for 26810 Edge Guide Slide Cap (left) for 26810 Edge Guide Slide Cop (right) for 26810 Edge Guide Slide Lever for 26810 Edge Guide Slide Spring for 26810 Edge Guide Slide Spring Cover for 121146 Edge Guide (roller) complete, Nos. 94D, 233J, 26803,
26805,26806, 26807, 26808,121146, two 207J and four 220J
Threod Unwinder Thread Cone (wood) for lorge cones No. 27739 is used with, but not included in 225260.
Tension Releasing Disc for 62609
Tension (thread retaining) Screw Stud Wosher Mochine Rest Pin (wood) 3-1/8 in. long (Accessories)
Belt Guord for 41931 Belt Guord Hinge for 41931
Belt Guard complete, Nos. 8420, 41929, two 41930 ond four wood screws 3/4 in. No. 9
Tension (threod retoining) Screw Stud 828C with 1560C, for 62935
Tension Releasing Lever
Feed Lifting Rock Shoft Cronk Connecting Rod with 125044 ond two 966E
Thread Take-up complete, Nos. 775E, 11204,12404,
12410 ond 43997
Feed Forked Connection complete, Nos. 20284, 52165,
56886 and two eoch 375C ond 1518J
Needle Bor Connecting Link 12382 with 12384, for 43990..
Oil Cup Extension44214 with 24075, for 44223 Oil Cup Packing (felt) for 44225
Foce Plote Threod Guord (lower) for 12150 Oil Cup Extension for 44005
Oil Cup for 44223
Oil Cup 44222 with 44005, for 44225 Oil Cup Threod Retoiner for 44225
Oil Cup complete, Nos. 44006,44223 ond 44224 Face Plote Threod Guord (upper) for 139615
Tension Screw Stud for 62609 Vibroting Presser Bor Tension Screw
Feed (upper) Shaft Cronk (bock) Connecting Link Hinge
Screw
Feed (upper) Shoft Cronk (front) Connecting LinkHinge
Screw
Arm Side Cover Thumb Screw
Edge Guide Slide Roller ond Stud for 121146 Threod Guord (side of orm)
Arm Oil Tube Packing (wick) for 111 19 ond 24131 Spool Holder Bose for 52047
Spool Holder complete, Nos. 52046, 200079, ond 204296..
Feed Connecting Linkfor 43993 Threod Retoiner
Feed Bor Screw Center 313C with 1519J
Feed Lifting Rock Shoft Screw Center 307C with 1513J Feed Rock Shaft Screw Center 307C with 1513J
Foot Lifter Bell Cronk 5596 with 5599 ond 5601, for 5598...
Knee Lifter Bell Cronk 5596 with 5599 ond 5601, for 5598..
Foot Lifter Choin Hook (lorge) for 5670 Foot Lifter Choin Hook (small) for 5670 Feed Regulator 3039 with 818W, for 43993 Tension (thread retoining) Thread Guide
