Mat. Res. vol.13 número4

The mechanical properties evaluations of the reinforced concrete with vegetable fibers were obtained through the compressive strength test; Tensile strength in flexion; Tensile

This study evaluated the effect of laser welding on the titanium ceramic tensile bond strength and showed higher tensile bond strength in the specimens subjected to aluminum

The diametral tensile strength (DTS) test is an adap- tation of the tensile strength test, since it is impos- sible to perform tensile strength tests on brittle ma- terials, like

This main objective of this research is to evaluate the variability of the mechanical properties (compressive strength, modulus of elasticity and tensile strength) and bond strength

These stress ields, very different to the bending tensile test and indirect tensile test by diametral compression, ultimately result in values of tensile strength of the

The incorporation of APTES as a coupling agent did not affect the values of tensile strength compared to the control, while the incorporation of VTMS increased tensile strength

1.The introduction of a principal tensile stress reduces substantially the ultimate compressive strength under biaxial tension-compression in relation to the uniaxial

The mechanical properties evaluations of the reinforced concrete with vegetable ibers were obtained through the compressive strength test; Tensile strength in lexion; Tensile