• Nenhum resultado encontrado

Mat. Res. vol.16 número6

N/A
N/A
Protected

Academic year: 2018

Share "Mat. Res. vol.16 número6"

Copied!
5
0
0

Texto

Loading

Imagem

Table 1. Frequency of occurrence of CSL boundaries and hardness  Vickers for various deformation conditions.
Figure 3. Misorientation proile: (a) as-received, (b) deformed at 10% and CSL boundaries distribution: (c) as-received, (d).
Figure 4. Intragranular  misorientation  profile  shows  twin  boundaries aspect detected in sample deformed at 25%.

Referências

Documentos relacionados

The improved technology has allowed the study of electronic structure of solids with a complex crystalline structure and containing various atoms, different in the unit cell, and

Observations of the Effects of Different Chemical Blowing Agents on the Degradation of Poly(Lactic Acid) Foams in Simulated Soil..

However, all the samples taken from failed crusher jaws revealed either austenitic grains with large carbide at the grain boundaries or large carbide at the grain boundary and in

Comparison of total number of publications from institutions in carbon nanotubes from 2001 to 2010 using the analytical tool (“Organizations” and “Organizations-Enhanced”

In the present work the effect of substituting Mo with Nb on the glass forming ability and corrosion resistance of Fe-Co-Cr-M-Si-B-Y (M=Mo, Nb) ribbons with high corrosion

Thus, the objective of this work was to process nanostructured composite materials based on formulations containing different quantities of multiwalled carbon nanotubes in an

Compressive Deformation Behavior Modeling of AZ31 Magnesium Alloy at Elevated Temperature Considering the Strain

Cerium salts using as inhibitors have shown to provide active protection for aluminum alloys against corrosion 4-6 as well as cerium-based coatings prepared by sol–gel method