Matriculada na Conservatória do Registo Comercial do Seixal, sob nº7348.Capital Social €5000. Contribuinte nº 506 612 546
MIDES® AIR BLASTER
The company MIDES®, is in the market for 25 years in South America 25. MIDES® is a mark of a technology pioneer for AIR BLASTERS and the service fort RATING BALLS MILLS®.
MIDES® has developed technology that allows MIDES® AIR BLASTERS work for 3 years without changing any component MIDES® VALVE.
MAIN CHARACTERISTICS
Model 6TMM
Mounting:
-
Valve 100% metal with high resistance to high temperature regimes.-
Small number of moving parts, MIDES® VALVE is vault.Matriculada na Conservatória do Registo Comercial do Seixal, sob nº7348.Capital Social €5000. Contribuinte nº 506 612 546
Maintenance:
- No need for lubrication, the valve constructively and the materials used, do not need any treatment of compressed air, such as lubrication.
- No need any preventive maintenance, the MIDES® VALVE is reinforced (one piece) without access to their elements.
- Has no corrective maintenance costs.
Security and reliability:
- 100% reliable for a period of at least three years in environments of hig h aggression.
- Quick and safe maintenance, a single part, which replacement can be made a maximum of 5 minutes, with minimal operator exposure to aggressive environment where the equipment is running.
- Low operating noise level, the MIDES® VALVE for being 100% shielded, without holes to relieve external pneumatic air (exhaust), the valve noise is barely noticeable when actuated in an industrial environment.
Performance / Economy:
- Given the mounting MIDES® VALVE, provides the following features: 1.º - Lower maintenance costs and replacement parts (close to $ 0). 2.º - Fewer moving parts.
3.º - Lower volume of air required to command the work valve, allowing the smallest time necessary to release the air stored under pressure in the tank, making this machine the best performance features, making more work for the same volume air.
Matriculada na Conservatória do Registo Comercial do Seixal, sob nº7348.Capital Social €5000. Contribuinte nº 506 612 546
Cost:
-
Lower cost assets, from simple constructively presented by MIDES® AIRBLASTER is now the lowest cost equipment of the market.
- Lower operating cost because the MIDES® VALVE that has a higher discharge rate, the ability to do work is increased, for the same job requires a smaller volume of air which is directly a lower consumption of energy.
- Lower maintenance costs because the MIDES® VALVE does not require any preventive maintenance or care even with lubrication.
- Longer service life, because the minimum life for any work environment, including high-aggression, has guarantee of MIDES® for 3 years. Which is already the lowest cost in human intervention and in spare parts.
Matriculada na Conservatória do Registo Comercial do Seixal, sob nº7348.Capital Social €5000. Contribuinte nº 506 612 546
Recommended time for parts replacement
Recommendations for preventive and exchange quantities. Part Work life
(normal)*
Number of parts need in stock to have in direct relation to the total
of MIDES® AIR BLASTER
Preventive replacement **
Directional valve
3/2 way 18 months 10% 12 months
Quick Exhaust
Valve 18 months 10% 12 months
MIDES® VALVE Model 6TMM 4 or 5 years No need 3 years and 6 months
(*) – The useful life of the pieces take into consideration the quality of compressed air and the correct use of equipment. The compressed air must be clean and free of particulates, water and oil. The working pressure of the MIDES® AIR BLASTER must not be greater than 7 bar.
- Parts that MIDES® recommends keeping in stock are: 1- Directional valve 3/2 way (Position 50)
2- Quick Exhaust Valve (Position 56) - MIDES® VALVE (no need to stock): MIDES® VALVE Model 6TMM (*)
(*) – The MIDES® VALVE Model have full warranty for 3 years and its replacement when required, must be complete (all valve). There is no need to keep in stock. 1
Matriculada na Conservatória do Registo Comercial do Seixal, sob nº7348.Capital Social €5000. Contribuinte nº 506 612 546
compressed air and the correct use of equipment. The exchange early, before the expiration of life, avoidies stops for corrective maintenance.
Note: The smaller the interval between firings the equipment, the shorter the life of parts. It is recommended intensive monitoring the operation of the MIDES® AIR BLASTER in the first weeks of use, to determine the optimal interval for each system, thereby avoiding unnecessary consumption of parts and compressed air.
TECHNICAL DATA:
CONSTRUCTION FORM TMM
Mounting Norm NR13 ; ANSI/ASME BPV VIII-1
Temperature max. / Min. External environment
180 °C/-30 °C
PTP 10 BAR
Pressure of work Min.: 4 BAR; Max.: 08 BAR Time to recharge the reservoir ~ 60 seconds
Residual pressure in the reservoir after discharging
< 1,5 bar Time of explosion of the stored air < 0,15 seg
Quality of compressed air Air industrial filtered, dispensing line
Matriculada na Conservatória do Registo Comercial do Seixal, sob nº7348.Capital Social €5000. Contribuinte nº 506 612 546
The DESOCEL started its activity as a representative of MIDES ® brand in 2003. The aim of the company since then is branding MIDES ® across Europe and Africa. The company intends to bring this technology to their customers to provide higher throughput and lower costs for the cement companies.
The DESOCEL is currently working with these factories:
SECIL Pataias (Leiria) – Portugal
SECIL Outão (Setúbal) – Portugal
SECIL Maceira (Leiria) – Portugal
Secil Brita (Ota) - Portugal
CIMPOR Loulé (Algarve) – Portugal
CIMPOR Alhandra (Alverca) – Portugal
CIMPOR Souselas (Coimbra) – Portugal
Cimpor Açores – Portugal
Tudela Veguin (Aboño Carreño) – Espanha
Tudela Veguin (La Robla) – Espanha
Cimentos Portland Valderrivas (El Alto – Morata de Tajuña) – Espanha
Holcim (Lorca) – Espanha
Holcim (Gador) – Espanha
Holcim (Carboneras) – Espanha
Holcim (Yeles) – Espanha
Holcim (Jerez) – Espanha
Uniland Cementera (Els Monjos) – Espanha
Uniland Cementera (Vallcarca) - Espanha
Cementos Andalucia (Cordoba) – Espanha
Cemex (Castillejo) – Espanha
Cemex (Alicante) – Espanha
Cemex (Morata i Jalón) – Espanha
Matriculada na Conservatória do Registo Comercial do Seixal, sob nº7348.Capital Social €5000. Contribuinte nº 506 612 546
Lafarge ( Montcada i Reixac) – Espanha
Fym (Malaga) – Espanha
Cementos Lemona – Espanha
Cementos Alfa – Espanha
Societe de Cimentes de Gabés – Tunisia
Best regards, DESOCEL, Cóm. Rep. De Máquinas Industriais, LDA Rui Batalha www.desocel.com desocel@gmail.com 00 351 932 932 065