Science Arts & Mйtiers (SAM)

AFM contact scales, glass fibers show the same tribological behavior as at the macro-tribo- contact scales at dry conditions where the dynamic friction coef- ficient decreases also by

To show the influence that storage can have, two drying simulations with the same global surface area in both collectors were compared: one system without storage consisting of an air

To simulate the adhesion of the reactive fluid on the mold surface, we developed a model to fix the fluid particles when they reached a certain viscosity and when they are exposed to a

sy Yield stress R0 Radius of the plate t0 Thickness of the plate f Half angle of the striker r0 Radius of the striker n Poisson's ratio G Fracture toughness E Young modulus rp

The authors used the Gumbel extreme value distribution to describe the microstructure sensitivity of the http://dx.doi.org/10.1016/j.ijfatigue.2014.01.024 Abbreviations:HCF, high

Three points will be discussed: ➀the high oxidation rate of pDCPD in thin samples and the occurrence of degradation in thick samples where oxygen diffusion is the limiting step, ➁the

This so-calledweak inertia regimewas first obtained in the case of periodic homogeneous and isotropic media but was extended to the case of anisotropic ones with the restriction of

Two configurations are tested, one where thefilter covers the entire lower surface of the quartz window and another where it is placed in a ring close to the reactor wall to confine the