Apreciação final

Todo este projecto foi motivante e estimulante, tendo ganho bastante experiência em Computação de Fluidos Dinâmicos, uma ferramenta cada vez mais utilizada em estudos de processos industriais. Todos os conceitos aprendidos serão úteis pois sem dúvida serão um óptimo contributo para o futuro profissional.

Referências 46

Referências

Alopaeus, V., P. Moilanen and M. Laakkonen (2009) ―Analysis of Stirred Tanks with Two-Zone Models‖ American Institute of Chemical Engineers Journal 55, 2545–2552.

Aubin, J., D. F. Fletcher e C. Xuereb (2004) ―Modeling turbulent flow in stirred tanks with CFD: The influence of the modeling approach, turbulence model and numerical scheme‖

Experimental Thermal and Fluid Science 28(5), 431-445.

Baldi, S. e M. Yianneskis (2003) ―On the Direct Measurement of Turbulence Energy Dissipation in Stirred Vessels with PIV‖ Industrial & Engineering Chemistry Research 42(26), 7006-7016. Baldi, S., A. Ducci e M. Yianneskis (2004) ―Determination of dissipation rate in stirred vessels through direct measurement of fluctuating velocity gradients‖ Chemical Engineering and

Technology 27(3), 275-281.

Bartels, C., M. Breuer and F. Durst (2000) ―Comparison between Direct Numerical Simulation and k−ε Prediction of the Flow in a Vessel Stirred by a Rushton Turbine‖ Proceedings of 10th

European Conference Of Mixing, 239–246.

Brucato, A., M. Ciofalo, F. Grisafi and G. Micale (1994) ―Complete Numerical Solution of Flow Fields in Baffled Stirred Vessels: The Inner–Outer Approach‖ Proceedings of 8th European

Conference Of Mixing, 155–162.

Brucato, A., M. Ciofalo, F. Grisafi and G. Micale (1998) ―Numerical Prediction of Flow Fields in Baffled Stirred Vessels: A Comparison of Alternative Modelling Approaches‖ Chemical

Engineering Science 53, 3653–3684.

Bujalski, J. M., Z. Jaworski, W. Bujalski e A. W. Nienow (2002) ―The influence of the addition position of a tracer on CFD simulated mixing times in a vessel agitated by a Rushton turbine‖

Chemical Engineering Research and Design 80(8), 824-831.

Ciofalo, M., A. Brucato, F. Grisafi and N. Torraca (1996) ―Turbulent Flows in Closed and Free Surface Unbaffled Tanks Stirred by Radial Impellers‖ Chemical Engineering Science 51, 3557– 3573.

Daskopoulos, P. and C. K. Harris (1996) ―Three Dimensional CFD Simulations of Turbulent Flow in Baffled Stirred Tanks: An Assessment of the Current Position‖ Institution of Chemical

Engineers Symposium Series 140, 1–113.

Deglon, D. A. e C. J. Meyer (2006) ―CFD modelling of stirred tanks: Numerical considerations‖

Minerals Engineering 19(10), 1059-1068.

Derksen, J. J. and H. E. A. van den Akker (1999) ―Large Eddy Simulations on the Flow Driven by a Rushton Turbine‖ American Institute of Chemical Engineers Journal 45, 209–2221. Dong, L., S. T. Johansen and T. A. Engh (1994) ―Flow Induced by an Impeller in an Unbaffled Tank—II. Numerical Modelling‖ Chemical Engineering Science 49, 3511–3518.

Ducci, A. e M. Yianneskis (2005) ―Analysis of errors in the measurement of energy dissipation with two-point LDA‖ Experiments in Fluids 38(4), 449-460.

Guha, D., M. P. Dudukovic and P. A. Ramachandran (2006) ―CFD-Based Compartmental Modelling of Single Phase Stirred-Tank Reactors‖ American Institute of Chemical Engineers

Journal 52, 1836–1846.

Harvey, P. S. and M. G. Greaves (1982a) ―Turbulent Flow in an Agitated Vessel Part-I: A Predictive Model‖ Chemical Engineering Research and Design 60, 195–200.

Harvey, P. S. and M. G. Greaves (1982b) ―Turbulent Flow in an Agitated Vessel Part-II: Numerical Solution and Model Predictions‖ Chemical Engineering Research and Design 60, 201–210.

Jahoda, M., M. Moštěk, A. Kukuková e V. Machoň (2007) ―CFD modelling of liquid homogenization in stirred tanks with one and two impellers using large eddy simulation‖

Chemical Engineering Research and Design 85(5 A), 616-625.

Javed, K. H., T. Mahmud and J. M. Zhu (2006) ―Numerical Simulation of Turbulent Batch Mixing in a Vessel Agitated by a Rushton Turbine‖ Chemical Engineering and Processing 45, 99–112.

Jaworski, Z., K. N. Dyster, I. P. T. Moore, A. W. Nienow and M. S. Wyszynski (1997) ―The Use of Angle Resolved LDA Data to Compare Two Differential Turbulence Models Applied to Sliding Mesh CFD Flow Simulations in a Stirred Tank‖ Proceedings of 9th European Conference Of

Mixing 11, 187–194.

Jaworski, Z., W. Bujalski, N. Otomo e A. W. Nienow (2000) ―CFD study of homogenization with dual rushton turbines-comparison with experimental results. Part I: Initial studies‖

Chemical Engineering Research and Design 78(3), 327-333.

Jaworski, Z. e B. Zakrzewska (2002) ―Modelling of the turbulent wall jet generated by a pitched blade turbine impeller: The effect of turbulence model‖ Chemical Engineering

Research and Design 80(8), 846-854.

Jenne, M. and M. Reuss (1997) ―Fluid Dynamic Modelling and Simulation of Gas–Liquid flow in Baffled Stirred Tank Reactors‖ Proceedings of 9th European Conference Of Mixing 11 (52), 201–208.

Jenne, M. and M. Reuss (1999) ―A Critical Assessment on the Use of k−ε Turbulence Models for Simulation of the Turbulent Liquid Flow Induced by a Rushton Turbine in Baffled Stirred Tank Reactors‖ Chemical Engineering Science 54, 3921–3941.

Jones, R. M., A. D. Harvey III and S. Acharya (2001) ―Two-Equation Turbulence Modelling for Impeller Stirred Tanks‖ Journal of Fluids Engineering 123, 640–648.

Joshi, J. B., N. K. Nere, C. V. Rane, B. N. Murthy, C. S. Mathpati, A. W. Patwardhan e V. V. Ranade (2011) ―CFD simulation of stirred tanks: Comparison of turbulence models. Part I: Radial flow impellers‖ Canadian Journal of Chemical Engineering 89(1), 23-82.

Referências 48

Ju, S. Y., T. M. Mulvahill and R. W. Pike (1990) ―Three-Dimensional Turbulent Flow in Agitated Vessels with a Nonisotropic Viscosity Turbulence Model‖ Canadian Journal of

Chemical Engineering 68 (1), 3–16.

Kraume, M. e P. Zehner (2001) ―Experience with experimental standards for measurements of various parameters in stirred tanks: A comparative test‖ Chemical Engineering Research and

Design 79(8), 811-818.

Kresta, S. M. and P. E. Wood (1991) ―Prediction of the Three-Dimensional Turbulent Flow in Stirred Tanks‖ American Institute of Chemical Engineers Journal 37, 448–460.

Kukuková, A., M. Moštěk, M. Jahoda e V. Machoň (2005) ―CFD prediction of flow and homogenization in a stirred vessel: Part I vessel with one and two impellers‖ Chemical

Engineering and Technology 28(10), 1125-1133.

Lane, G. L., M. P. Schwarz and G. M. Evans (2000) ―Modelling of the Interaction between Gas and Liquid in Stirred Vessels‖ Proceedings of 10th European Conference Of Mixing, 197–204. Laurenzi, F., M. Coroneo, G. Montante, A. Paglianti e F. Magelli (2009) ―Experimental and computational analysis of immiscible liquid-liquid dispersions in stirred vessels‖ Chemical

Engineering Research and Design 87(4), 507-514.

Lee, K. C., K. Ng and M. Yianneskis (1996) ―Sliding Mesh Predictions of the Flows around Rushton Impellers‖ Institution of Chemical Engineers Symposium Series 140, 1–12.

Luo, J. Y., A. D. Gosman, R. I. Issa, J. C. Middleton and M. K. Fitzgerald (1993) ―Full Flow Field Computation of Mixing in Baffled Stirred Vessels‖ Chemical Engineering Research and

Design 71, 342–344.

Luo, J. Y., A. D. Gosman and I. R. Issa (1994) ―Prediction of Impeller Induced Flows in Mixing Vessels Using Multiple Frames of Reference‖ Proceedings of 8th European Conference Of

Mixing, 155–162.

Marshall, E., A. Haidari and S. Subbiah (1996) Annual meeting of American Institute of

Chemical Engineering, Chicago, Novembro.

Middleton, J. C., F. Peirce and P. M. Lynch (1986) ―Computation of Flow Fields and Complex Reaction Yield in Turbulent Stirred Reactors and Comparison with Experimental Data‖

Chemical Engineering Research and Design 64, 18–22.

Montante, G., K. C. Lee, A. Brucato and M. Yianneskis (2001) ―Numerical Simulations of the Dependency of Flow Pattern on Impeller Clearance in Stirred Vessels‖ Chemical Engineering

Science 56, 3751–3770.

Murthy, J. Y., S. R. Mathur and D. Choudhary (1994) ―CFD Simulation of Flows in Stirred Tank Rectors using a Sliding Mesh Technique‖ Proceedings of 8th European Conference Of Mixing, 155–162.

Ng, K., N. J. Fentiman, K. C. Lee and M. Yianneskis (1998) ―Assessment of Sliding Mesh CFD Predictions and LDA Measurements of the Flow in a Tank Stirred by a Rushton Impeller‖

Nikiforaki, L., J. Yu, S. Baldi, B. Genenger, K. C. Lee, F. Durst e M. Yianneskis (2004) ―On the variation of precessional flow instabilities with operational parameters in stirred vessels‖

Chemical Engineering Journal 102(3), 217-231.

Ochieng, A., A. M. S. Onyango, A. Kumar, K. Kiriamiti and P. Musonge (2008) ―Mixing in a Tank Stirred by a Rushton Turbine at a Low Clearance‖ Chemical Engineering and Processing 47, 842–851.

Ochieng, A. e M. Onyango (2010) ―CFD simulation of the hydrodynamics and mixing time in a stirred tank‖ Chemical Industry and Chemical Engineering Quarterly 16(4), 379-386. Panáček, M. (1998) ―Hydrodynamics of Stirred Tank Reactors – A Study With Laser Doppler Velocimetry and Computacional Fluid Dynamics‖ Tese de Doutoramento, Faculdade de Engenharia da Universidade do Porto, Porto.

Patwardhan, A. W. (2001) ―Prediction of Flow Characteristics and Energy Balance for a Variety of Axial Flow Impellers‖ Industrial & Engineering Chemistry Research 40, 3806–3816. Paul, Edward L., Atiemo-Obeng, Victor A., Kresta, Suzanne M. ―Handbook of Industrial Mixing: Science & Practice‖ John Wiley & Sons, 2004

Pericleous, K. A. and M. K. Patel (1987) ―The Modelling of Tangential and Axial Agitators in Chemical Reactors‖ Physicochemical Hydrodynamics 8, 105–123.

Perng, C. Y. and J. Y. Murthy (1993) ―A Moving-Deforming-Mesh Technique for Simulation of Flow In Mixing Tanks‖ Process Mixing: Chemical and Biochemical Applications, 37–41. Perng, C. Y. and J. Y. Murthy (1994) ―A Moving Deforming Mesh Technique for Simulation of Flow in Mixing Tanks‖ Proceedings of 8th European Conference Of Mixing, 37–39.

Perry, R.H. e Green, D.W. ―Perry's Chemical Engineers' Handbook‖ McGraw-Hill; 6ªEdição, 1984

Placek, J., L. L. Talvarides, G. W. Smith and I. Fort (1986) ―Turbulent Flow in Stirred Tanks, Part II: A Two Scale Model of Turbulence‖ American Institute of Chemical Engineers Journal

32, 1771–1786.

Ranade, V. V. and J. B. Joshi (1990) ―Flow Generated by a Disc Turbine: Part II Mathematical Modelling and Comparison with Experimental Data‖ Chemical Engineering Research and

Design 68A, 34–43.

Ranade, V. V. and S. M. S. Dommeti (1996) ―Computational Snapshot of Flow Generated by Axial Impellers in Baffled Stirred Vessels‖ Chemical Engineering Research and Design 74, 476– 484.

Ranade, V. V. (1997) ―An Efficient Computational Model for Simulating Flow in Stirred Vessels: A Case of Rushton Turbine‖ Chemical Engineering Science 52, 4473–4484.

Ranade, V. V., M. Perrard, N. Le Sauze, C. Xuereb e J. Bertrand (2001) ―Trailing vortices of Rushton turbine: PIV measurements and CFD simulations with snapshots approach‖ Chemical

Referências 50

Ranade, V. V., Y. Tayalia and H. Krishnan (2002) ―CFD Predictions of Flow Near Impeller Blades in Baffled Stirred Vessels: Assessment of Computational Snapshot Approach‖ Chemical

Engineering Communications 189, 895–922.

Rigby, G. D., G. M. Evans and G. J. Jameson (1997) ―Bubble Breakup from Ventilated Cavities in Multiphase Reactor‖ Chemical Engineering Science 52, 3677–3684.

Santos, R. J. (2003) ―Mixing Mechanisms in Reaction Injection Moulding-RIM. An LDA/PIV Experimental Study and CFD Simulation‖ Tese de Doutoramento, Faculdade de Engenharia da Universidade do Porto, Porto.

Tabor, G., A. D. Gosman and R. I. Issa (1996) ―Numerical simulation of the flow in a mixing vessel stirred by a Rushton Turbine‖ Institution of Chemical Engineers Symposium Series 140, 25–34.

Um, B. H. e T. R. Hanley (2008) ―A CFD model for predicting the flow patterns of viscous fluids in a bioreactor under various operating conditions‖ Korean Journal of Chemical

Engineering 25(5), 1094-1102.

Venneker, B. C. H. and H. E. A. van den Akker (1997) ―CFD Calculations of the Turbulent Flow of Shear-Thinning Fluids in Agitated Tank‖ Proceedings of 9th European Conference Of Mixing

11, 179–186.

Wardle, K. E., T. R. Allen, M. H. Anderson e R. E. Swaney (2008) ―Free surface flow in the mixing zone of an annular centrifugal contactor‖ American Institute of Chemical Engineers

Journal 54(1), 74-85.

Xu, Y. and G. McGrath (1996) ―CFD Predictions in Stirred Tank Flows‖ Chemical Engineering

Research and Design 74, 471–475.

Yeoh, S. L., G. Papadakis e M. Yianneskis (2004) ―Numerical Simulation of Turbulent Flow Characteristics in a Stirred Vessel Using the LES and RANS Approaches with the Sliding/Deforming Mesh Methodology‖ Chemical Engineering Research and Design 82(7), 834- 848.