LISTA VAZIA
CEN/TR 16676:2014 , €17.50 Energy losses by industrial door
5. Projetos de Norma Europeias e Internacionais em Inquérito Público
5.1 CEN
Lista dos projetos de normas e das propostas de estudo de novas normas, da área não eletrotécnica, elaborados pelo Comité Europeu de Normalização (CEN) e pelo Comité Europeu para a Normalização do Ferro e do Aço (ECISS).
Para cada referência menciona-se a designação codificada (por ex: prEN; prEN ISO; FprEN), o título e a data limite de inquérito.
Para as designações prEN ou prEN ISO poderão ser enviados comentários redigidos em língua inglesa, que deverão ser registados no formulário Comments Form.
O mesmo formulário poderá ainda ser utilizado, caso seja detetada a existência de legislação nacional que contradiga o respetivo prEN ou prEN ISO.
O formulário com os comentários deve ser enviado, até 10 dias úteis antes da data limite do período de inquérito, para a caixa de correio eletrónico nor@ipq.pt ou para o endereço postal: Instituto Português da Qualidade
Departamento de Normalização Rua António Gião, 2
2829-513 CAPARICA
Até à data limite do período de inquérito estes documentos são disponibilizados gratuitamente, a pedido, através do endereço eletrónico vendas@ipq.pt.
Chama-se a atenção que estes projetos não são documentos finais.
CEN/TC 127
EN 1366-10:2011/prA1:2014
Fire resistance tests for service installations - Part 10: Smoke control dampers
Data Limite : 2015-03-30 CEN/TC 288
EN 1536:2010/prA1:2014
Execution of special geotechnical work - Bored piles
Data Limite : 2015-03-16 CEN/TC 288
EN 1538:2010/prA1:2014
Execution of special geotechnical works - Diaphragm walls
Data Limite : 2015-03-16 CEN/TC 109
EN 15502-1:2012/prA1:2014
Gas-fired heating boilers - Part 1: General requirements and tests
Data Limite : 2015-03-23 CEN/TC 260
EN 16319:2013/prA1:2014
Fertilizers and liming materials - Determination of cadmium, chromium, lead and nickel by
inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution
Data Limite : 2015-03-30 CEN/TC 249
EN ISO 899-1:2003/prA1:2014
Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2003/FDAM1:2014) Data Limite : 2014-12-16
Publicação oficial ▪ documentos normativos Mod-DNOR 01-08_03 41 2014-12-15014-12-15 Mechanical vibration - Measurement and
evaluation of human exposure to hand-transmitted vibration - (Part 2: Practical guidance for
measurement at the workplace (ISO 5349 2:2001/FDAM 1:2014)
Data Limite : 2014-12-23 CEN/TC 278
FprCEN ISO/TS 19321:2014
Intelligent transport systems - Cooperative ITS - Dictionary of in-vehicle information (IVI) data structures (ISO/PRF TS 19321:2014)
Data Limite : 2015-02-06 CEN/TC 19
FprCEN/TR 15745:2014
Liquid petroleum products - Determination of hydrocarbon types and oxygenates via
multidimensional gas chromatography method - Round Robin research report
Data Limite : 2015-01-23 CEN/TC 183
FprCEN/TR 16815:2014
CleANopen - Application profile for municipal vehicles
Data Limite : 2015-01-23 CEN/TC 424
FprCEN/TR 16824:2014
Early care services for babies born with cleft lip and/or palate
Data Limite : 2015-02-06 CEN/TC 133
FprCEN/TS 15656:2014
Copper and copper alloys - Determination of phosphorus content - Spectrophotometric method Data Limite : 2015-01-23
CEN/TC 278
FprCEN/TS 16794-1:2014
Public transport - Communication between contactless readers and fare media - Part 1: Implementation requirements for ISO/IEC 14443 Data Limite : 2015-01-23
CEN/TC 49
FprEN 30-2-1:2014
Domestic cooking appliances burning gas - Part 2-1: Rational use of energy - General
Data Limite : 2015-04-06
CEN/TC 205
FprEN 455-2:2014
Medical gloves for single use - Part 2:
Requirements and testing for physical properties Data Limite : 2014-12-23
CEN/TC 205
FprEN 455-3:2014
Medical gloves for single use - Part 3:
Requirements and testing for biological evaluation Data Limite : 2014-12-23
CEN/TC 218
FprEN 853:2014
Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification Data Limite : 2014-12-30
CEN/TC 218
FprEN 854:2014
Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification Data Limite : 2014-12-30
CEN/TC 218
FprEN 856:2014
Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
Data Limite : 2014-12-30 CEN/TC 218
FprEN 857:2014
Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
Data Limite : 2014-12-30 CEN/TC 127
FprEN 1364-1:2014
Fire resistance tests for non-loadbearing elements - - Part 1: Walls
Data Limite : 2015-03-30 CEN/TC 132
FprEN 1396:2014
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
Publicação oficial ▪ documentos normativos Mod-DNOR 01-08_03 42 2014-12-15014-12-15
normativosDOCUMENTOS
Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoCEN/TC AECMA
FprEN 2084:2014
Aerospace series - Cables, electrical, general purpose, with conductors in copper alloy - Technical specification
Data Limite : 2015-01-06 CEN/TC AECMA
FprEN 2266-008:2014
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 008: DRP (pair) DRT (3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable - Product standard Data Limite : 2015-01-06
CEN/TC AECMA
FprEN 2267-011:2014
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -65 °C and 260 °C - Part 011: DZA family, single and multicore assembly for use in low pressure atmosphere - Product standard
Data Limite : 2015-01-06 CEN/TC AECMA
FprEN 2267-012:2014
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -65 °C and 260 °C - Part 012: DZ family, single UV laser printable for use in low pressure atmosphere - Product standard
Data Limite : 2015-01-06 CEN/TC AECMA
FprEN 4552:2014
Aerospace series - Pipe coupling 37°, spherical, in heat resisting steel - Straight nipples, welded end - Inch series
Data Limite : 2015-01-06 CEN/TC AECMA
FprEN 4652-110:2014
Aerospace series - Connectors, coaxial, radio frequency - Part 110: Type 1, BNC interface - Clamp nut assembly version - Straight plug - Product standard
Data Limite : 2015-01-06 CEN/TC AECMA
FprEN 4652-212:2014
Aerospace series - Connectors, coaxial, radio frequency - - Part 212: Type 2, TNC interface -
Clamp nut assembly version - Square flange receptacle - Product standard
Data Limite : 2015-01-06 CEN/TC AECMA
FprEN 4652-310:2014
Aerospace series - Connectors, coaxial, radio frequency - Part 310: Type 3, N interface - Clamp nut assembly version - Straight plug - Product standard
Data Limite : 2015-01-06 CEN/TC AECMA
FprEN 4681-005:2014
Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-cald aluminium - Part 005: AZ family, single, for use in low pressure atmosphere - Product standard Data Limite : 2015-01-06
CEN/TC AECMA
FprEN 4681-006:2014
Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 006: AZA family, single and multicore assembly, for use in low pressure atmosphere - Product standard
Data Limite : 2015-01-06 CEN/TC 165
FprEN 12050-1:2014
Wastewater lifting plants for buildings and sites - Part 1: Lifting plants for wastewater containing faecal matter
Data Limite : 2014-12-16 CEN/TC 165
FprEN 12050-2:2014
Wastewater lifting plants for buildings and sites - Part 2: Lifting plants for faecal-free wastewater Data Limite : 2014-12-16
CEN/TC 165
FprEN 12050-3:2014
Wastewater lifting plants for buildings and sites - Part 3: Lifting plants for limited applications Data Limite : 2014-12-16
CEN/TC 165
FprEN 12050-4:2014
Wastewater lifting plants for buildings and sites - Part 4: Non-return valves for faecal-free
Publicação oficial ▪ documentos normativos Mod-DNOR 01-08_03 43 2014-12-15014-12-15 matter
Data Limite : 2014-12-16 CEN/TC 296
FprEN 13094:2014
Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction Data Limite : 2014-12-16
CEN/TC 166
FprEN 13384-1:2014
Chimneys - Thermal and fluid dynamic
calculation methods - Part 1: Chimneys serving one heating appliance
Data Limite : 2014-12-23 CEN/TC 166
FprEN 13384-2:2014
Chimneys - Thermal and fluid dynamic
calculation methods - Part 2: Chimneys serving more than one heating appliance
Data Limite : 2014-12-23 CEN/TC 33
FprEN 13637:2014
Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods
Data Limite : 2015-04-05 CEN/TC 33
FprEN 13830:2014
Fachadas-cortina - Norma de produto Data Limite : 2015-01-06
CEN/TC 136
FprEN 14619:2014
Roller sports equipment - Kick scooters - Safety requirements and test methods
Data Limite : 2015-01-06 CEN/TC 292
FprEN 15002:2014
Characterization of waste - Preparation of test portions from the laboratory sample
Data Limite : 2015-01-06 CEN/TC 133
FprEN 15079:2014
Copper and copper alloys - Analysis by spark source optical emission spectrometry (S-OES)
CEN/TC 292
FprEN 15863:2014
Characterisation of waste - Leaching behaviour test for basic characterisation - Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions
Data Limite : 2015-01-06 CEN/TC 212
FprEN 16263-1:2014
Pyrotechnics articles - Other pyrotechnic articles - Part 1: Terminology
Data Limite : 2015-01-06 CEN/TC 212
FprEN 16263-3:2014
Pyrotechnic articles - Other pyrotechnic articles - Part 3: Categories and types
Data Limite : 2015-01-06 CEN/TC 212
FprEN 16263-4:2014
Pyrotechnic articles - Other pyrotechnic articles - Part 4: Test methods
Data Limite : 2015-01-06 CEN/TC 212
FprEN 16263-5:2014
Pyrotechnic articles - Other pyrotechnic articles - Part 5: Minimum labelling requirements and instructions for use
Data Limite : 2015-01-06 CEN/TC 346
FprEN 16515:2014
Conservation of Cultural Heritage - Guidelines to characterize natural stone used in cultural heritage Data Limite : 2015-01-06
CEN/TC 275
FprEN 16618:2014
Food analysis - Determination of acrylamide in food by liquid chromatography tandem mass spectrometry (LC-ESI-MS-MS)
Data Limite : 2015-01-06 CEN/TC 275
FprEN 16619:2014
Food analysis - Determination of benzo[a]pyrene, benz[a]anthracene, chrysene and
Publicação oficial ▪ documentos normativos Mod-DNOR 01-08_03 44 2014-12-15014-12-15
normativosDOCUMENTOS
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalizaçãobenzo[b]fluoranthene in foodstuffs by gas chromatography mass spectrometry (GC-MS) Data Limite : 2015-01-06
CEN/TC 275
FprEN 16620:2014
Food analysis - Determination of furan in coffee and coffee products
Data Limite : 2015-01-06 CEN/TC 248
FprEN 16653:2014
Rubber or plastics-coated fabrics - Determination of stitch tear force (with needle) - Test method Data Limite : 2015-01-06
CEN/TC 139
FprEN ISO 3233-3:2014
Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material (ISO/FDIS 3233-3:2014)
Data Limite : 2014-12-23 CEN/TC 155
FprEN ISO 3501:2014
Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for resistance to pull-out under constant
longitudinal force (ISO/FDIS 3501:2014) Data Limite : 2015-01-06
CEN/TC 338
FprEN ISO 6647-2:2014
Rice - Determination of amylose content - Part 2: Routine methods (ISO/FDIS 6647-2:2014) Data Limite : 2015-01-06
CEN/TC 189
FprEN ISO 10318-1:2014
Geosynthetics - Part 1: Terms and definitions (ISO/FDIS 10318-1:2014)
Data Limite : 2014-12-23 CEN/TC 189
FprEN ISO 10318-2:2014
Geosynthetics - Part 2: Symbols and Pictograms (ISO/FDIS 10318-2:2014)
Data Limite : 2014-12-23
CEN/TC 261
FprEN ISO 12818:2014
Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013)
Data Limite : 2015-03-30 CEN/TC 261
FprEN ISO 12821:2014
Glass packaging - 26 H 180 crown finish - Dimensions (ISO 12821:2013)
Data Limite : 2015-03-30 CEN/TC 155
FprEN ISO 13844:2014
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO/FDIS 13844:2014)
Data Limite : 2014-12-23 CEN/TC 155
FprEN ISO 13845:2014
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO/FDIS 13845:2014)
Data Limite : 2014-12-23 CEN/TC 335
FprEN ISO 16948:2014
Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen (ISO/FDIS 16948:2014)
Data Limite : 2014-12-30 CEN/TC 121
FprEN ISO 17658:2014
Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology (ISO 17658:2002)
Data Limite : 2015-03-23 CEN/TC 12
FprEN ISO 17945:2014
Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments (ISO/FDIS 17945:2014)
Data Limite : 2015-01-06 CEN/TC 248
Publicação oficial ▪ documentos normativos Mod-DNOR 01-08_03 45 2014-12-15014-12-15 Superfine woven wool fabric labelling -
Requirements for Super S code definition (ISO/FDIS 18103:2014)
Data Limite : 2015-01-06 CEN/TC 121
FprEN ISO 18278-1:2014
Soldadura por resistência - Soldabilidade - Parte 1 - Soldadura de materiais metálicos pelo processo de resistência por pontos, roletes, bossas,
avaliação da soldabilidade Data Limite : 2014-12-16 CEN/TC 33
prEN 179:2014
Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods Data Limite : 2015-04-06
CEN/TC 38
prEN 350:2014
Durability of wood and wood-based products - Testing and classification of the resistance to biological agents, the permeability to water and the performance of wood and wood-based materials
Data Limite : 2015-03-30 CEN/TC 135
prEN 1090-5:2014
Execution of steel structures and aluminium structures - Part 5: Technical requirements for thin-gauge, cold-formed aluminium elements and structures for roof, ceiling, floor and wall
applications
Data Limite : 2015-03-30 CEN/TC 33
prEN 1125:2014
Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods
Data Limite : 2015-04-06 CEN/TC 150
prEN 1459-1:2014
Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks Data Limite : 2015-04-06
CEN/TC 175
Wood flooring and wood panelling and cladding - Determination of dimensional stability
Data Limite : 2015-04-06 CEN/TC ECISS/107
prEN 10028-1:2014
Flat products made of steels for pressure purposes - Part 1: General requirements
Data Limite : 2015-04-06 CEN/TC ECISS/107
prEN 10028-2:2014
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
Data Limite : 2015-04-06 CEN/TC ECISS/107
prEN 10028-3:2014
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized Data Limite : 2015-04-06
CEN/TC ECISS/107
prEN 10028-4:2014
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
Data Limite : 2015-04-06 CEN/TC ECISS/107
prEN 10028-6:2014
Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
Data Limite : 2015-04-06 CEN/TC ECISS/107
prEN 10028-8:2014
Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels,
thermomechanically rolled Data Limite : 2015-04-06 CEN/TC ECISS/107
prEN 10120:2014
Steel sheet and strip for welded gas cylinders Data Limite : 2015-04-06
CEN/TC 33
Publicação oficial ▪ documentos normativos Mod-DNOR 01-08_03 46 2014-12-15014-12-15
normativosDOCUMENTOS
Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoWindows and doors - Air permeability - Classification
Data Limite : 2015-04-13 CEN/TC 127
prEN 13381-7:2014
Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members
Data Limite : 2015-04-06 CEN/TC 121
prEN 13479:2014
Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
Data Limite : 2015-03-30 CEN/TC 51
prEN 13639:2014
Determination of total organic carbon in limestone Data Limite : 2015-03-30
CEN/TC 264
prEN 14789:2014
Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
Data Limite : 2015-03-23 CEN/TC 264
prEN 14790:2014
Stationary source emissions - Determination of the water vapour in ducts - Standard reference method
Data Limite : 2015-03-23 CEN/TC 264
prEN 14791:2014
Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
Data Limite : 2015-03-23 CEN/TC 264
prEN 14792:2014
Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence
Data Limite : 2015-03-23 CEN/TC 264
prEN 14793:2014
Stationary source emissions - Demonstration of equivalence of an alternative method with a reference method
Data Limite : 2015-03-23 CEN/TC 264
prEN 15058:2014
Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry
Data Limite : 2015-03-23 CEN/TC 256
prEN 15220:2014
Railway applications - Brake indicators Data Limite : 2015-03-30
CEN/TC 228
prEN 15316-1:2014
Heating systems and water based cooling systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and Energy performance expression Data Limite : 2015-03-30
CEN/TC 228
prEN 15316-4-1:2014
Heating systems and water based cooling systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating and DHW generation systems, combustion systems (boilers, biomass)
Data Limite : 2015-03-30 CEN/TC 228
prEN 15378-1:2014
Heating systems and water based cooling systems in buildings - Heating systems and DHW in buildings - Part 1: Inspection of boilers, heating systems and DHW
Data Limite : 2015-03-30 CEN/TC 228
prEN 15378-3:2014
Heating systems and water based cooling systems in buildings - Heating systems and DHW in buildings - Part 3: Measured energy performance Data Limite : 2015-03-30
CEN/TC 212
Publicação oficial ▪ documentos normativos Mod-DNOR 01-08_03 47 2014-12-15014-12-15 Part 2: Requirements
Data Limite : 2015-01-06 CEN/TC 249
prEN 16465:2014
Plastics - Methods for the calibration of black-standard and white-black-standard thermometers and black-panel and white-panel thermometers for use in natural and artificial weathering
Data Limite : 2015-01-13 CEN/TC 150
prEN 16796-1:2014
Energy efficiency of industrial trucks - Test methods - Part 1 : General
Data Limite : 2015-03-30 CEN/TC 150
prEN 16796-2:2014
Energy efficiency of Industrial trucks - Test methods - Part 2 : Operator controlled self-propelled trucks, towing tractors and burden-carrier trucks
Data Limite : 2015-03-30 CEN/TC 150
prEN 16796-3:2014
Energy efficiency of Industrial trucks - Test methods - Part 3 : Container handling lift trucks Data Limite : 2015-03-30
CEN/TC JT005
prEN 16803-1:2014
Space - Use of GNSS-based positioning for road Intelligent Transport Systems (ITS) - Part 1: Definitions and system engineering procedures for the establishment and assessment of performances Data Limite : 2015-03-30
CEN/TC 136
prEN 16804:2014
Diving equipment - Diving open heel fins - Requirements and test methods
Data Limite : 2015-03-23 CEN/TC 136
prEN 16805:2014
Diving equipment - Diving mask - Requirements and test methods
Data Limite : 2015-03-23 CEN/TC 248
Textiles and textile products - Textiles containing phase change materials (PCM) - Part 1:
Determination of the heat storage and release capacity
Data Limite : 2015-04-06 CEN/TC 19
prEN 16807:2014
Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants
Data Limite : 2015-03-30 CEN/TC 248
prEN ISO 105-G01:2014
Textiles - Tests for colour fastness - Part G01: Colour fastness to nitrogen oxides
Data Limite : 2015-01-21 CEN/TC 139
prEN ISO 2811-1:2014
Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO/DIS 2811-1:2014)
Data Limite : 2015-03-16 CEN/TC 144
prEN ISO 4254-7:2014
Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harversters (ISO/DIS 4254-7:2014)
Data Limite : 2015-03-23 CEN/TC 156
prEN ISO 5801:2014
Fans - Performance testing using standardized airways (ISO/DIS 5801:2014)
Data Limite : 2015-03-16 CEN/TC CST01
prEN ISO 10087:2014
Small craft - Craft identification - Coding system (ISO/DIS 10087:2014)
Data Limite : 2015-03-16 CEN/TC 206
prEN ISO 10993-6:2014
Biological evaluation of medical devices - Part 6: Tests for local effects after implantation (ISO/DIS 10993-6:2014)
Publicação oficial ▪ documentos normativos Mod-DNOR 01-08_03 48 2014-12-15014-12-15
normativosDOCUMENTOS
Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoCEN/TC 275
prEN ISO 11290-1:2014
Microbiology of the food chain - Horizontal method for the detection and enumeration of Listeria monocytogenes and other Listeria spp. - Part 1: Detection method (ISO/DIS 11290-1:2014)
Data Limite : 2015-03-30 CEN/TC 275
prEN ISO 11290-2:2014
Microbiology of the food chain - Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. - Part 2: Enumeration method (ISO/DIS 11290-2:2014) Data Limite : 2015-03-30
CEN/TC CST01
prEN ISO 14895:2014
Small craft - Liquid-fuelled galley stoves and heating appliances (ISO/DIS 14895:2014) Data Limite : 2015-03-23
CEN/TC 305
prEN ISO 16852:2014
Flame arresters - Performance requirements, test methods and limits for use (ISO/DIS 16852:2014) Data Limite : 2015-03-23
CEN/TC 230
prEN ISO 18635:2014
Water quality - Determination of short-chain polychlorinated alkanes (SCCPs) in sediment and suspended (particulate) matter - Method using gas chromatography-mass spectrometry (GCMS) and negative-ion chemical ionization (NCI) (ISO/DIS 18635:2014)
Data Limite : 2015-03-30 CEN/TC 142
prEN ISO 19085-2:2014
Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO/DIS 19085-2:2014)
Data Limite : 2015-03-16 CEN/TC 139
prEN ISO 20567-1:2014
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing (ISO/DIS 20567-1:2014)
Data Limite : 2015-03-16
CEN/TC 139
prEN ISO 20567-2:2014
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO/DIS 20567-2:2014)
Data Limite : 2015-03-16 CEN/TC 251
prEN ISO 21298:2014
Health informatics - Functional and structural roles (ISO/DIS 21298:2014)
Publicação oficial ▪ documentos normativos Mod-DNOR 01-08_03 49 2014-12-15014-12-15
Lista dos projetos de documentos harmonizados, de normas e de propostas de estudo de novas normas, da área eletrotécnica, elaborados pelo Comité Europeu de Normalização Eletrotécnica(CENELEC).
Para cada referência menciona-se a designação codificada (por ex: prEN; FprEN ; FprHD), o título e a data limite de inquérito.
Os comentários a estes documentos deverão ser redigidos em língua inglesa e registados no formulário Comments Form.
O mesmo formulário poderá ainda ser utilizado, caso seja detetada a existência de legislação nacional que contradiga o respetivo prEN ou prHD.
O formulário com os comentários deve ser enviado, até 10 dias úteis antes da data limite do período de inquérito, para a caixa de correio eletrónico nor@ipq.pt ou para o endereço postal: Instituto Português da Qualidade
Departamento de Normalização Rua António Gião, 2
2829-513 CAPARICA
Até à data limite do período de inquérito estes documentos são disponibilizados gratuitamente, a pedido, através do endereço eletrónico vendas@ipq.pt.
Chama-se a atenção que estes projetos não são documentos finais.
NOR_AENOR - Asociación Española de Normalización y Certificación
BT Vila/NOT ES0030:2014
Low-voltage switchgear and controlgear - Ancillary equipment - Terminal block assemblies for testing kW-h meters
Data Limite : 2015-01-20 CENELEC/TC 215
CLC/FprTR 50174-99-1:2014
Information technology - Cabling installation - Part 99-1: Remote powering
Data Limite : 2015-02-27 CENELEC/TC 40XB
EN 60115-1:2011/FprAA:2014
Fixed resistors for use in electronic equipment - Part 1: Generic specification
Data Limite : 2015-02-13 CENELEC/TC 23BX
EN 60669-2-1:2004/FprA2:2014
Interruptores para instalações eléctricas fixas, domésticas e análogas - Parte 2-1: Requisitos particulares - Interruptores electrónicos Data Limite : 2015-01-30
CENELEC/TC 205
FprEN 50090-4-3:2014
Home and Building Electronic Systems (HBES) - Part 4-3: Media independent layers -
Communication over IP (EN 13321-2) Data Limite : 2015-04-17
CENELEC/SC 9XA
FprEN 50617-1:2014
Aplicações ferroviárias - Parâmetros básicos dos sistemas de deteção de comboios - Parte 1: Circuitos de via
Data Limite : 2015-01-28 CENELEC/SC 9XA
FprEN 50617-2:2014
Aplicações ferroviárias - Parâmetros básicos dos sistemas de deteção de comboios - Parte 2: Contadores de eixos
Publicação oficial ▪ documentos normativos Mod-DNOR 01-08_03 50 2014-12-15014-12-15
normativosDOCUMENTOS
Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoData Limite : 2015-01-28 CENELEC/TC 111X
FprEN 50625-2-2:2014