Lock and edit keypad - Short press to insert * - Long press to lock/unlock the keyboard in idle mode. Long press to activate/deactivate “Do not disturb” mode - Long press to insert a pause (P) while calling.
Safety information
Conformity
Power requirements
Warning !
Telephone connection
Safety precautions
Environmental care
Conformity,Environment and Safety
DECTTM is a trademark of ETSI registered for the benefit of the implementers of the DECT technology.
Using GAP standard compliance
Declaration of conformity
Installing the Twist 495
Unpacking your Twist 495
Installing the base station
Installing and replacing the batteries in the handset
Battery life and range
Understanding the menu systemIdle mode
Introduction
Belgacom screen saver
How to navigate in the menus
To store an SMS
To store a name from predial
Basic principles
To make and to answer a call
To call from the phonebook
Redial from call log
In call features
Editing systems 19 The Eatoni® system is a predictive editing system designed to help you write an SMS. Twist 495 uses two editing systems: Multi-tap and Eatoni®. While editing, a long press on allows you to switch between the two systems.
Case mode
Editing systems
To send and receive SMS messages, the outgoing SMS center number (1717) and the incoming SMS center number (01717) must be set in your Twist 495 (see page 26). These numbers are set by default in the phone. You can send text messages without additional settings. To receive SMS messages, your telephone number must be registered with one (or more) SMS box numbers. This understanding of the subaddress of an SMS box can be compared to mailboxes of different houses.
When the sender sends you an SMS from GSM, he must add the sub-address of the SMS mailbox where he wants to send it. If he does not add this number, Belgacom will automatically send an SMS to mailbox 0, so we advise you to always use the sub-address 0 in one phone (the default sub-address is 0 (zero)). Enter the phone number directly and press OK or press to recall the number from the phonebook.
Send new SMS
SMS 21 With your Twist 495 you can send and receive text messages (SMS = Short Message Service). With With your Twist 495 you can send and receive text messages (SMS = Short Message Service). With Belgacom SMS service you can send SMS to a fixed or cell phone. If the recipient of your SMS has no device compatible with that service, the message is received as a voice message. When you send an SMS, your phone number is always sent to the recipient.
Read SMS
To forward an SMS
Enter the number of the Destination field (if any) and press OK. The text can be changed or selected if necessary. Scroll through the list of SMS messages and select the one you want to resend. Press to directly access Send new SMS. Scroll through the list of SMS messages and select the one you want to delete. Press to directly access Send new SMS.
Enter the password, if any, and press OK (optional). Browse through the SMS list and select. To create an SMS field, see the SMS settings page 25 Press to go directly to the Send new SMS option.
To set the SMS mode
SMS settings
Handset
Babysit mode
Registration
Rename handset
Display contrast
Date & timeLanguage
Backlight
Screen saver
Answering machine 31 The Twist 495 has an answering machine that records the calls when it is activated. You can reach the answering machine from the base station or the handset. It can store up to 25 messages within the maximum recording time of 30 minutes. A message can be up to 3 minutes long. If you have subscribed to the Caller Identification Service (CLI), the display shows the name of the caller and their group, if enabled (see page 41).
Saved messages
Scroll up to access the call log and scroll to choose the message from the call log list. The entry is highlighted (see page 42). The other options available are ccaallll, rreeccoorrdd and sseenndd SSMMSS (if the "Calling Name Display Service" is subscribed).
Settings
Scroll to Voicemail and select Scroll to Voicemail Settings and select Scroll to Voice Language and select. Scroll to Voicemail and select Scroll to Voicemail Settings and select Scroll to Call Screening and select. Scroll to Voicemail and select Scroll to Voicemail Settings and select Scroll to Recording Quality and select Choose between High or Standard and select.
Scroll to Answering Machine and select Scroll to Answer Settings and select Scroll to Remote Control and select Select Mode. Scroll to Answering Machine and select Scroll to Answer Settings and select Scroll to Remotes and select Scroll to Change Code and select. Scroll to Answering Machine and select Scroll to Record a memo and select Press to start recording and again to stop.
Record and listen to a memo
This feature allows you to leave local messages for your family on the answering machine. Scroll through the list of handsets and select the one you want to transfer the call to Press to enter options (with handset 1). If there is no answer from the called mobile, you can resume the call to the first mobile.
Pick up the line on the called handset, both internal callers can speak Press to select Transfer (with handset 1). Conference calls allow sharing an external call with two handsets (in intercom). The 3 people can share the conversation. Browse the handset list and select the one you want to call. The called handset rings.
Add new
View
To change the SMS box number
Enter the destination field number and press OK Scroll down to go directly to the list of names. Scroll through the list of names and select a name Scroll to the Change SMS field and select. Scroll down to go directly to the list of names Browse through the list of names and select Scroll to Delete and select.
Scroll down to reach the list of names directly. Scroll through the list of names and select Scroll to Send SMS and select. To define a group for a name and number (see Group settings p.39) Scroll down to reach the list of names directly. If you have subscribed to the Caller Line Identification (CLI), you will also have the list of outgoing calls.
Delete all
Call log settings
Enter or recall the number you want to forward calls to in the phonebook and press OK. The number is automatically linked to the call forwarding prefix and the system dials the number.
Call duration
Alarm clock
To set the alarm ring tone type and ring tone volume
To set Do Not Disturb mode Press to open the carousel menu Scroll to Extra and select. Scroll to Alarm, select Scroll to Settings, and select Tap to select Ringtones. Scroll to Do not disturb mode and select Scroll to Set day, select the day and press Select from the available ringtones and select Scroll to Ringtone volume and select.
Warning! Only allowed callers will be able to reach you on the selected day and time. This feature allows you to screen calls after a certain time in the evening or when you do not want to be disturbed. If none of the 4 groups is selected, but the feature is enabled, no one will be able to get hold of you. If the caller does not belong to an allowed group, the handset and base station remain silent while the caller hears the ring tone. The answering machine (if enabled) or the answering machine (depending on the network) answers the call. The feature is disabled by default.
Do not Disturb mode
Handset ring tones
Base ring tones
Handset ring tone volumeGroup ring tones
Base ring tone volume
Record personal melody
Scroll to Sounds and select Scroll to Settings and select Scroll to Earphone Tone and select. Scroll to Key and feedback tones and select Press to select ON or scroll to OFF and select. Scroll to Sounds and select Scroll to Settings and select Scroll to Music on hold and select.
Enable registration
Line settings
Press to enter carousel menu Go to base station and select Scroll to line settings and select Scroll to select language and select Browse language list and select. Go to base station and select Move to line settings and select Go to first ringer and select Choose between ON or OFF and select. To prevent the phone from ringing when you receive an SMS, the first ring tone is disabled. You can activate it.
Belgacom Service code settings
When you subscribe to extra services or to Belgacom, you may have to set a number of codes in your telephone. Make sure you have fully charged the handset according to the phone instructions. Yes, there is no “memory effect”. All current models with NiMh batteries allow the handset to remain on the base station.
No, you won't. The data recorded on your phone is not deleted in the event of a general power failure or when you disconnect the base station or when you replace the batteries. It is a way to send an SMS to someone's personal inbox instead of sending it to the default inbox, which is a kind of regular inbox. If you send an SMS without specifying an SMS box number (destination box), then the SMS will be sent to the default box if the recipient's phone has multi-box functions (depending on the provider).
Troubleshooting
Make sure you have a DSL filter plugged directly into any home line outlet - Check that the modem and phone are plugged into the correct filter jack (one specific to each) - The filter(s) can be defective. The equipment you have purchased has been carefully selected by Belgacom and is covered by a two-year parts and labor warranty against any material or manufacturing defects, unless otherwise specified. The warranty will be valid from the date the equipment is collected or delivered. If you have any problems with the device, you must take it to a teleboutique or one of our authorized agents, complete and in its original packaging, or in packaging offering the same degree of protection, together with the original receipt. addresses for our teleboutiques and authorized agents are provided in the information section of the White Pages.
We will repair or replace your equipment free of charge on presentation of invoice in the event of any defect in material or workmanship. Belgacom itself determines which repairs and/or replacements are necessary. The warranty for repaired or replaced equipment ends on the date the original warranty for the purchased equipment expires, but must not be less than 3 months. Belgacom is not responsible for any indirect or immaterial damage suffered by the customer due to the failure of the terminal equipment, such as loss of production, revenue or contracts.
Notes
