Singer 71-30 Singer 71-31

Singer 71-30

Singer 71-31

~r:~;·----

·' I

'

~

. Form 3131w

,

^r~

⁽³⁵⁶⁾

lj' ~(·

Pdotod lo U. S. A.

:'Ao.

'

..

I "-

~·

^I

LIST

' I

i _I ' OF

1,

'~

~l _~,II PARTS

t

^{j ·: .}

. '~

'

~ *'·.~..

^..

'

SINGER ..

MACI-Il·N ES

Nos. 71-30 and 71-31

THE SINGER MANUFACTURING COMPANY

INSTRUCTIONS FOR OILING

To ensure easy running and prevent unnecessary wear of

the parts which are in movable contact, the machine requires oiling, and when in continuous use, "TYPE B" or "TYPE D" OIL, sold by Singer Sewing Machine Company, should be applied at least twice each day to all oil holes marked

"OIL", as instructed in Form 7804.

11TYPE D" OIL

should be used when an oil is desired which

will

produce a minimum of stain on fabrics, even after a long period of storage.

Occasionally remove the screw from the loose pulley

end apply c smell quantity of BALL BEARING LUBRICANT to the ball bearing of the pulley through the tapped hole, using BALL BEARING LUBRICANT sold by Singer Sewing

Machine Company, then replace the screw in the loose

pulley.

Copyright© 1956 by The Singer Manufacturing Company

;

•

• I

INDEX

Page Accessories,,,, •••••••••••••• , ••. ,,, .••••••• , •••••• 22 Bobbin Winder, •••. , •••••• , •• , , , . , , •••••.•••••• , .••. 22 Clamp Parts •••••••••••••••••.•••• , ••.•••.•.•••• , ••• 25 Driving Equipment,.,,,., •• , . , , •• , , , , , , , , , . , , , •••• , •. 23 Driving Equipment for Machines when set in pairs,., ••• 26 Guides., .•••• , •••••••••• , ••••••.••••••••••.••••.••• 28 Iron Base •.•.••• , ••••••••••• , ••••• , ••••••••••••.••• 24 Knives,,, •••.••••••••••••••• , ••.••••••••••••••••••. 28 Machine No, 71-30, •••••••••••••••••••.•••••••.••.•••• S Machine No. 71-31 ••••.••••.•••••.••••.•.• , , •..•••••• 21 Miscellaneous Parts •••••••• , ••••••••••••.••••••..••• 29 Numerical List of Parts ••••.•••• , ••.• , ..•.••••.• , ••• ,31 Thread Unwinder .•• , •..•••••••• , ••••• , ••••••••••. ,,. 25

INSTRUCTIONS FOR ORDERING

In ordering from this list, use ONLY the PART numbe·r in the FIRST column.

The number stamped on a Sewing Machine Part is the number of the Single Part only, except when the part includes Set Screws, Clam·ping Screws, Studs and Rollers Spun on, Small Wires riveted, or Parts soldered together, etc., which it is necessary to furnish in combination.

Every combination of parts sent out has its specific number which, although not stamped on Parts (except in above case'), must be used when ordering the combination.

Each number always indicates the SAME PART in what- ever list it appears, or

~or

whatever Machine.

The letters after some of the numbers indicate the style of finish only, as follows:

A-Hardened, Polished, Nickel Plated and Buffed.

AL-Heat Treated for Toughness.

ALX-,Heat Treated for Toughness and Black Oxide.

B-Polished, Nickel Plated and Buffed.

C-Hordened only.

D-Polished only.

E-Soft, Not polished.

F-Hardened and Polished.

J-Nickel Plated only.

R-Merlized.

X-Biack Oxide, for Iron and Steel.

XC-Hardened and Black Oxide, for Iron and Steel.

Y-Biack Nickel Plated only.

Z-Chromium Plated.

These letters MUST BE USED when they appear in the list and AFTER the number, as in the list.

In this series

1 to 1500, 200001 to 201500 and 350001 to 351500 are Screw Numbers.

1501 to 1800, 201501 to 201800 and 351501 to 351800 are Nut Numbers.

1801 to 2000, 201801 to 202000 and 351801 to 352000 are Roller Numbers.

2001 to 50000 and 202001 to 350000 are Numbers of Machine Parts.

The figures in the second column refer only to the plate in which the illustration of the part is shown and are NOT TO BE USED in ordering.

Two or more numbers over a cut indicate that the differ- ence between such parts is not visible in· an illustration.

Parts marked with an asterisk

(*.)

are· furnished only when repairs are made at the factory.

'·

'V

•

5

LIST OF PARTS COMPLETE

FOR

MACHINE No. 71-30

MAKES PURL STITCH BUTTONHOLES WITH SQUARE BARRED ENDS. KNIVES FROM 3fs TO 3,4 INCH

LONG. CUTS BOTH THREADS AND THE HOLE AUTOMATICALLY AFTER

STITCHING.

LOW SPEED MACHINE. POSITIVE FEED CLUTCH.

No.

*39602 8582

7~8E

868E 23352

*2~081

12357

Plate 17881 17881 17881 17890 17890

Name Arm with 2qos1

" Dowel Pin (2) Screw (back) (2)

" (front) (2) Shaft

" Bushing (front)

11 Flanged Bushing (back)

6 PARTS FOR MACHINE No. 71-30

No. Plate q35AL 17890 q78q 17890 1069D 17890 39620 17965 190D 17965 39621 17965 808AL 17965 23562 17882 858AL 17882 398qq 17965 1228C 17965 1589C 17965 23563 17963 2356,. 17963 1276C 17963 1226C 17963 23565 17963 805C 17963 213949 17963 39616 17963 39617 17963 39618 17963 1227C 17963 1655E 17963 23566 17963 12qC 17963 1518J 17963 23361 17963 1248C 17963 23362 17963 93X 17963 15072 17963 235qq 17963 23545 17963 203C 17963 235q6 17963

999F 17963 2336q 17963 2qOD 17963 2366,. 17963 23665 17963 1286C 17963 23666 17963 23367 17963 193F 17963 7071 17963 23370 17965 856C 17965

Name

Arm Shaft Flanged Bushing (back) Set Screw

Arm Shaft Oil Pad (2) Screw Side Cover

11 11 Screw Top Cover

" 11 Screw (3}

Barring Cam with two 858AL

11 11 Set Screw Indicator

Stud

" Thumb Nut Lever

·,

¹¹ Catch with 1226C

"

"

"

"

" Hinge Screw

" Position Stud

" Spring

" Screw Washer

" 11 Stud

"

'' Rivet (long}

'' (short)

11 Hinge Screw

11 Nut

" Spring

11 Stop Screw '' .. Nut Ratchet Pawl

" 11 Hinge Screw

11 Spring

" Screw Stop Pin Retaining Pawl (hinge screw end)

Barring Ratchet Retaining Pawl (wheel end)

Barring Ratchet Retaining Pawl Adjust- ing Screw

Barring Ratchet Retaining Pawl {adjust- able) complete, Nos. 203C, 23544 and 235q5

Barring Ratchet Retaining Pawl Hinge Screw

Bar~ing Rat~het Reta~.ning Pa

1

^{~1 Sp~!ng}

Screw

Barring Ratchet Wheel

" " " Spring

" Screw

" Washer

" Tripr,ing Po~

1

^nt

Screw

Barring Ratchet Wheel Tripping Point Screw Washer

Barring Tripping Lever

n ,, " Hinge Screw

rr

_i

:1

i :..

I

I

• I

I

No.

*39603 39538 1235F

389F 135D 23567

625F 1547X 3958q q0003 219F q0004

207F 191C 395,.1 23379 23380 196F 402D 40005 qQ006 1,0007 404D 23381,

52C 39591

756D 13450 3961,5

1230F 249753

1231F qOqD qQ010

1232C 1960 1520J 395qq 350076C

1671C 39532 39583 2q0D 39605 23392 91qF 23393

914F 2339q

~ARTS FOR MACHINE No. 71-30 7

Plate 17881 17881 17971 17971 17886 17885 17885 17885 17885 17885 17885 17885 17885 17885 17885 17885 17885 17885 1788q 17882 17882 17882 17882 17882

1788~

17881, 17884 17884 1788q 17885 17885 17885 17882 17882 17882 17882 17881 17882 17882 17882 17882 17882 1788q 1788q 17884 17881, 17881, 17882

Name Bed

11 Oil Guard

" Screw (2)

Bobbin Winder Base Plate Screw (2)

" " Tension Bracket Screw Clamp Arm

" " Adjusting Screw (2)

"

" " Nut (2)

" Bracket with 196F Guide (left}

"

" Screw (2)

(right)

" Screw (2) Screw (3}

" Washer (3)

" Hinge Block

" " Pin

" Screw {3}

Carrier

" Set Screw

Block with ~0007 and four 40~0

Clamp Carrier Block Plate

" " " Screw

Screw Clamp Carrier

" "

Connecting Rod

" " Hinge Guide (left)

" " Screw {long)

" " (short) (right)

" Screw (2) Plate

11 Screw {back) (2)

" (front) (2)

" Regulator with 2~00, 1960 and 39583

Clamp Carrier Regulator Hinge Screw

" " 11 Roller and

Screw Stud with 1520J

Clamp Carrier Regulator Roller and Screw Stud Nut

Clamp Carrier Regulator Slide

" " " Stud (to regulate length of buttonhole)

Clamp Carrier Regulator Stud Nut

" " " " Sleeve

" Stop

" Screw Slide with 13~50, 39591 and two 7560

Clamp Carrier Slide Guide (left)

" " " " " Screw (2)

Clamp Carrier Slide Guide (right)

II II II 11 " Screw (2)

Clamp Carrier Slide Lever with 1960

8

No.

23395 23396 223D

67D 1960 1520J 7278 123l,C 23397

1658C 1256D 39606

39693

Note:

.39639

1297F 39607

237X 13l,8E l,001l, l,0015 41C 1520J 1901 40016

229D 12424

199D 262045

PARTS ~OR MACHIN~ No. 71-30

Plate 17882 17882 17882 17882 17882 17882 17882 17882 17882 17882 17884 17886

17886

Name

Clamp Carrier Slide Lever Regulator

" " n " " Cap

II II

Screw (l:i)

Clamp Carrier Slide Lever Regulator Screw

Clamp Carrier Slide Lever Roller and Screw Stud with 1520J

Clamp Carrier Slide Lever Roller and Screw Stud Nut

Clamp Carrier Slide Lever Socket Joint

" " 11 Regulating Stud

II II

Bushing

Clamp Carrier Slide Regulating Stud Thumb Nut

Clamp Carrier Slide Screw {2)

11 Check with 39607, two each 237X and 1348E, for 3/8 to 3/1:1: in, button- holes

Clamp Check complete, for 3/8 to 3/1:1:

in, buttonholes, Nos, 219F, 2269, 39606. 39609 and J,OOl,8 to 40050 No. 39693 Clamp Check complete is furnished with this machine unless another Clamp Check is specified on order

17886 Clamp Check with 39607, two each

17886

17886 17886 17886 17886 17886 17964 17964 17964 17964 17964 17964 17964

17964 17964 17886 17964

237X and 131:1:8E, for 3/8 to 1 in.

buttonholes

Clamp Check complete,for 3/8 to 1 in, buttonholes, Nos. 219F, 2269, 39609, 39639 and l:.OOI:i:8 to 40050

Clamp Check Screw {2)

11 11 Section and Cutting Plate

II II II II

Screw

Clamp Check Section and Cutting Plate Support Stud

Clamp Lifting Arm

" 11

" Connection

" Hinge Screw

II II II

Nut

Clamp Lifting Arm Connection Roller and Screw Stud with 2290 and 12424 Clamp Lifting Arm Connection Roller

and Screw Stud Bracket

Clamp Lifting Arm Connection Roller and Screw Stud Bracket Screw Clamp Lifting Arm Connection Roller

and Screw Stud Bracket Screw Washer

Clamp Lifting Arm Connection Roller Cap Screw

Clamp Lifting Arm Connection Roller Cap Screw Washer

Clamp Lifting Arm Screw (2)

11 n 11 Stop with 20051:1:3XC and 201537X

{

,,

P~RTS ~OR MACHIN~ No. 71-30 9

No.

l,0018 162D 1248C 1611E J,0019

59D Plate 17964 17964 17964 17964 17964 17964 2005J,3XC 17964 201537X 17964 J,0020 17885 1235F 17884 23573 17885 402D 17885 23574 17885 1659C 17885 23l,Ol, 17885 23693 17885 1294C 17885 1550J 17885 20197 17966

*20198

896AL 17966 908C 17966 1619E 17966 1250.... 17966 249631

217D 1900 23407

375C 1518J

17881 17881 17881 17966 17966 17966 23408 17966 966E 17966 202277 17966 23409 17966 1275C 17966 1521E 17966 23557 17966 23412 17890 448AL 17890 3999.. 17882 232600 17 882 453AL 17882 39995 17882 39996 1788?

90D 17882

Name Clamp Lifting Arm Stop Bracket

u n 11 " 11 Screw

(2)

Clamp Lifting Arm Stop Hinge Screw

II II II II II II

Nut

Clamp Lifting Arm stop Pitman

11 11 11 II II Hinge Screw (2)

Clamp Lifting Arm Stop Screw

11 " " 11 11 Nut

11 Plate

11 Screw (1:1:)

11 Support

11 " Screw (2)

" Post

" Pressure Regulating Thumb Nut

11 Spring

11 Bushing

11 11 Position Stud

11 II Nut

11 Connecting Rod with 20198, 12501:1:1:1:

and two 896AL

Crank Connecting Rod Cap

" " " " Screw

(felt) Face Plate

11 Hinge Screw

11 11 n Nut

11 Oil Packing

11 Screw (lower)

" 11 (upper)

Feed Connecting Rod (lower)

11 u 11 11 Hinge Screw

II II II

Nut

Feed Connecting Rod (upper) with 202277 and two 966E

Feed Connecting ROd (upper) Cap Screw

Feed Connecting Rod (upper) Oil Pack- ing (wick)

Feed Disengaging Lever

11 " " Hinge Screw

" " 11 Nut

11 11 Spring

" Eccentric with l:i:l:i:BAL

11 Set Screw

11 Hand Ratchet Lever

" Collar with two 1:1:53AL

Feed Hand Ratchet Lever Collar Set Screw

Feed Hand Ratchet Lever Pawl Body Feed Hand Ratchet Lever Pawl com-

plete, Nos, 207E, 39523,39995 and two 101:1:9E

Feed Hand Ratchet Lever Pawl Hinge Screw

10 PARTS FOR MACHINE No. 71.30

No.

39523 1049E

207E 13218 39997

Plate 17882 17882 17882 17882 17882 39924 17882 3012 17882 460AL 17882 23418 17966 23419 17966 17966 17966 448AL 17966 23422 17966 39590 17966 181D 17966 39552

23698 17883

Name

Feed Hand Ratchet Lever Pawl Point Position Screw

Feed Hand Ratchet Lever Pawl Point Screw

Feed Hand Ratchet Lever Pawl Spring Feed Hand Ratchet Lever complete, Nos.

90D, 13218,39994 and 39996 Feed Hand Ratchet Wheel with 460AL

'' Pin '' Set Screw

11 Rock Shaft

Feed Rock Shaft complete, Nos. 23~18 and 23.l,a20

Feed Rock Shaft Hinge Pin with 23.l,a21

n' 11 11 11 Plug (leather)

Feed Rock Shaft Hinge Pin Set Screw

11 11 " Spring

11 Plate

11 Screw

" Wheel with 23!:.32 and two 220D for wide bight and wide cutting space, for overall work, etc.

Note: Feed Wheel 2-3698 is furnished with this rna·

chine unless otherwise specified on order.

249556 350415C 201897 249549 249550 255096 255097 249560

249589 .249561 50088C

*23429 196E 249557

52C 1236C

17883 Feed Wheel Clutch Disc

17883 ¹¹ 249555 with

17883 17883 17883 17883 17883 17883 17883

17883 17883 17883

17883 17883 17883 17883

249549,249550 249589,three each 185X, 201897, 255096 and 255097 Feed Wheel Clutch Disc Locking Plate

with 350ltlSC

Feed Wheel Clutch Disc Locking Plate Screw

Feed Wheel Clutch Roller

11 Carrier

" Oiling Felt

Feed Wheel Clutch Roller Spring

11 11 Guide

Feed Wheel Clutch (positive) complete, for Machines equipped with spring

clutch, Nos. 52C, 20172.l,aX, 2.l,a9556 to 249559,249561,249562,249820 and Form 2.l,a6lw

Feed Wheel Driving Lever

" " "

Pitman with 23.l,a29150088C and two l96E Feed Wheel Driving Lever Pitman

Ball Joint Screw

Feed Wheel Driving Lever Pitman Cap

"

_Screw

" " ^"

^{II II}

Feed Wheel Driving Lever Plate

" " ^" "

^Screw

" ^"

Regulating Stud

(

No.

7070 201724X

185X 249558

1237C 1520J 14017 23552 23553 23554 23555 2117C 249559

39595 898C 39504

2256 233D 721D 39596 23431

1¥.RTS FOR MACHINE No. 71.30 11

Plate 17883 17883 17883 17883 17883 17883 17883 17883 17883 17883 17883 17883 17883 17883 17883 17883 17883 17883 17883 17883 17882

Name

Feed Wheel Driving Lever Regulating Stud Sleeve

Feed Wheel Driving Lever Regulating Stud Thumb Nut

Feed Wheel Driving Lever Screw

n 11 " " Washer (felt)

11 Friction Ring Screw

" " " Nut

11 Washer

11 Section (long)

11 (short)

" Spring Feed Wheel Friction Ring complete,

Nos. 23552 to 23554 Feed Wheel Pin

Retaining Clutch

Washer

tl ' ' Cap

" Screw

"

Fe~d Wh~

1

el Reta~~ing Cl~~ch Sp~

1

^ing

Screw

Feed Wheel Retaining Clutch Spring Stop Screw

Feed Wheel Retaining Clutch Stud

" " Shaft

457AL 17882 " Oil Hole Plug Screw

" Tripping Lever 23433

350237C 1620E 23587

203C 23/j35

190D 179E 23432

220D 23445 23446 23447 23448 23449 Note:

23450 23451 23452 23453 23454 23455 23460 23461 1239D

17883 17883

17883

"

:: :: Hi~

1

^{ge Sc~}

1

^ew

Nut 17883

17883

Feed Wheel Tripping Lever Point

•• 11 " " " Screw

{2) 17883 17883 17883

Spring Fe~d Wh~el Trip~ing Le~er

11 Screw

" Stop Screw

17883 ¹¹ Point

17883 " Screw

17967 Knife,3/8inch 17967 7/16 inch

17967 l/2 inch

17967 9/16 inch 17967 ¹¹ 5/8 inch

No. 23.l,al:.9 Knife is furnished with this machine unless another Knife is specified on order

17967 Knife, 11/16 inch

17967 3/4 inch

17967 13/16 inch

17967 7/8 inch

17967 ¹¹ 15/16 inch

17967 1 inch

17967 ¹¹ Bar

17967 " Connecting Link

17967 " " " Hinge Cap Screw

1240C 17967 Knife Bar Connecting Link Hinge Screw

12 PARTS FOR MACHINE No. 71-30

No.

231,62 l319F 21,9656

231,61, 231,65 157D

90C 1963 231,68 12I,1E 231,66 231,67

Plate 17967 17967 17967 17967 17967 17967 17967 17967 17967 17967 17882 17882

I,I,SAL 17882 175D

90C 23606

12I,2E 23l.!69 350281C

1l.!28C 1520J 23681

805C 23'-'70 23l.!71

1222C 1959

229D 12l.!2l.!

2l.!9737 2l.!95""

2l.!95l,5 50615D

168D 231,73

12l.!3C 17882 17967 17967 17967 17967 17967 17967 17967 17967 17967 17967 17967 17967 17967 17893

17893 17893 17967 17967 17967 17967 17967 17967 17968

Name

Knife Bar Connecting Stud with l319F n ¹¹ Clamping Screw

Knife Bar Disengaging Lever with 1242E

11 11 ' ' Catch with

1963

Knife Bar Disengaging Lever Catch Bracket

Knife Bar Disengaging Lever Catch Bracket Screw (2)

Knife Bar Disengaging Lever Catch Hinge Screw

Knife Bar Disengaging Lever Catch Roller and Stud

Knife Bar Disengaging Lever Catch Spring

Knife Bar Disengaging Lever Catch Spring Screw Stud {2)

Knife Bar Disengaging Lever Catch Tripping Point

Knife Bar Disengaging Lever Catch Tripping Point Collar with two I,I,8AL

Knife Bar Disengaging Lever Catch Tripping Point Collar Set Screw Knife Bar Disengaging Lever Catch

Tripping Point Screw

Knife Bar Disengaging Lever Hinge Screw

Knife Bar Disengaging Lever Spring

!I II II II II

Screw

Knife Bar Driving Lever

" 11 11 Hinge Screw

11 Screw Stud

11 Nut

11 Spring

"

11 (inter~^{11 Screw}

1

^ediate}

Connecting Link

Knife Bar Driving Lever (intermediate) Connecting Link Hinge Screw Knife Bar Driving Lever (intermediate)

Hinge Screw

Knife Bar Driving Lever (intermediate) Roller and Screw Stud with 229D and 121,21,

Knife Bar Driving Lever (intermediate) Roller Cap Screw

Knife Bar Driving Lever (intermediate) Roller Cap Screw Washer

Knife Bar Spring Stop

" Retainer Plate

" Holder

11 Guide Stud

11 Screw

" Screw

(

J

PARTS FOR MACHINE No. 71-30 13

No.

1608C 157C 15I,7X 191C 23390 39857 231,76 79I,E 1021E 39601

131,1c 231,77

Plate 17968 17967 17967 17967 17967 17968 17968 17968 17968 17968 17968 17890 1065AL 17890 858AL 17890 23l.!78 17968 23558 17963

1956

1655C 229D 23389 23667 39966 12l,l.!C 39622 39926 78C 1963 23l.!83 231,81, 1226E 21,9600

196F 39967

17963

17963 17963 17963 17963 17963 17963 17963 17963 17963 17963 17963 17963 17963 17963 17963 17890 l.!53AL 17890 23610 17968 23609 17968 190C 17968

Name Knife Holder Guide Stud Nut

Screw w Nut

11 Screw

" Washer Needle Bar with 90l:i:AL

Connecting Link with 794E

" " 11 Adjusting

Screw

Needle Bar Connecting Link Cap Screw

" • 11 Stud with 1341C

" Set Screw Crank with 858AL, 1036AL, 1065AL and 1258AL

Needle Bar Crank Position Screw

" Set Screw

11 Frame with 4784

" Bell Crank with 1956 and 15072

Needle Bar Frame Bell Crank Roller and Screw Stud with 229D, 1655C and 23389

Needle Bar Frame Bell Crank Roller and Screw Stud Nut

Needle Bar Frame Bell Crank Roller Cap Screw

Needle Bar Frame Bell Crank Roller Cap Screw Washer

Needle Bar Frame Bell Crank Stud Cam and Bevel Gear

"

Screw

Needle Bar Frame Connection with 1963 and 39616 to 39618

Needle Bar Frame Connection 39622 with 78C and 1226E

Needle Bar Frame Connection Hinge Screw

Needle Bar Frame Connection Roller and Stud

Needle Bar Frame Connection Spring

II II

Hook

Needle Bar Frame Connection Spring Screw Stud

Needle Bar Frame Connection Stud (eccentric)

Needle Bar Frame Connection Stud (eccentric) Set Screw

Needle Bar Frame Driving Bevel Pin- ion with two 453AL

Needle Bar Frame Driving Bevel Pin- ion Set Screw

Needle Bar Frame Pitman (hinge screw end)

Needle Bar Frame Pitman (regulator end}

Needle Bar Frame Pitman Adjusting Screw

I~ PARTS FOR MACHINE No. 71-30

No. Plate 7071 17968 23611 17968

I0~2C 17968

15~7X 17968

23~91 17968 39900 17968

!038C 17968 7070 17968

!589C 17968 1245C 17968 673F 17968 1517J 17968 39608 1788~

404D 1788~

90~AL 17968 39653 17966

3965~ 17966

2349~ 17966 23421 17966

4~8AL 17966 262044 17966 39655 17890 39656 17890 24047 17890 39657 17890 39658 17890 1253C 17890 19448 17890 226J 17890 12424 17890 1035C 17890

!636E 17890

2~050 17890

•249538

249891 17890 249539 17890

20058~0 17890

Name

Needle Bar Frame Pitman Adjusting Screw Washer

Needle Bar Frame Pitman (adjustable) complete, Nos. 23609,23610, two each 190C and 7071

Needle Bar Frame Pitman Hinge Screw

11 II II 11 II II

Nut

Needle Bar Frame Regulator

II II 11 1l 231:i91 With Needle Bar Frame Regulator Adjusting

Screw

Needle Bar Frame Regulator Adjusting Screw Sleeve

Needle Bar Frame Regulator Adjusting Screw Thumb Nut

Needle Bar Frame Regulator Hinge Screw

Needle Bar Frame Screw Center Plate

" Screw (2) Set Screw Oscillating Rock Shaft

" Nut

Oscillating Rock Shaft complete, Nos, 2349~, 39653 and 262044

Oscillating Rock Shaft Hinge Pin with 23421

Oscillating Rock Shaft Hinge Pin Oil Hole Plug (leather}

Oscillating Rock Shaft Hinge Pin Set Screw

Oscillating Rock Shaft Oil Pad

" Shaft

" Bushing {back)

" " {front)

" Crank

Oscillating Shaft Crank complete, Nos.

1636E, 24050,39657 and two 1253C Oscillating Shaft Crank Set Screw

" " " Slide Block

" Cap Screw

Oscillating Shaft Crank Slide Block Cap Screw Washer

Oscillating Shaft Crank Slide Block Screw Stud

Oscillating Shaft Crank Slide Block Screw Stud Nut

Oscillating Shaft Crank Slide Block complete, Nos. 226J, 1035C, 12424 and 19448

Pulley {loose) with 2005840

" " Ball Be a ring Bushing

Grease Retaining Screw

r

I •

PARTS FOR MACHINE No. 71-30 15

No.

249540 40024 39927 249541 249542

~0025

23500

*2~9597 151~0

2973 2974 15141 2975 592E 249546

399D 249599

Plate 17890 17890 17890 17890 17890 17890 17969 17969 17969 17969 17969 17969 17969 17969 17969 17969

17969 17969 23505 17890 2269 17890 462AL 17890 249593 17969 39969 17969 2532 17969 2533 17969 907E 17969 7326 17969 662D 17969 249928 17969 249594 17969 203E 17969 249595 17969 452C 17969

2~9596 17969

1'*5F 17969 591F 17969 15098 17969 39627 17893 717AL 17893

!520J 17893 2!643 17893

!59F 17893 23510 17893 8582 17893 123E 17893 23511 17893 6!C 17893 564c 17893

Name

Pulley (loose, ball bearing) complete, Nos. 249538, 249539 and 249891 Pulley (tight)

" 40024 with 40025 (tight), Counter Balance

" " " Rivet Pin

Shuttle Bobbin Case

'' Latch

" Lever

" Fulcrum Pin

Shuttle Bobbin Case Hinge, Nos. 2973, 2974 and 15140

Shuttle Bobbin Case Latch Spring

" Stop Screw Position Plate

" Screw Shuttle Bobbin Case complete, Nos.

591F, 592E, 2975, 15098,15141 and 249597

Shuttle Body

" 1-11/16 in.diam.,Nos.23500, 23503 and 249599

Shuttle Driver with 462AL

"

Pin Set Screw Race

" Back

" Position Pin

" Spring

" " Screw

" Cap n ¹¹ Screw

" Oil Packing (felt)

" Plate

" Screw

" Position Pin

" Set Screw Shuttle Race complete, Nos. 907E, 2533,

7326,39969,249546,249593,249594, two each 3990,6620, 2532, 249595, 249928 and three 203E

Shuttle Race Screw (2)

Tension Regulating Screw

" Spring Starting Lever

" 11 Adjusting Screw

"

"

" " Nut

" Be 1t Shifter Screw

11 Bracket

" Rod

Oowe 1 Pin {2) Screw

" Hinge Screw

" Screw Center

16 PARTS FOR MACHINE No. 71-30

No.

58384 1508R 14174

124C 1518J 39628 39580 23514 1070C 39988 21651 913C 1638E 202330

39629 23515 23516 249543

Plate 17893 17893 17893 17893 17893 17890 17893 17893 17893 17893 17893 17893 17893 17890 17890 17890 17890 17890 9780 17890 997E 17890 39637 17890 1349C 17890 39638 17890 457AL 17890 23518 17882 78D 17882 9540 17882 2102 17896 1560C 17896 23519 17896 40033 17964 12538 17964 50128E 17964 200AL 17896 23520

40034 679C 1520J 2269

413C 8238

17896 17896 17896 17896 17896 17896 17896

Name

Starting Lever Screw Center 564C with 1508R (2)

Starting Lever Screw Center Nut

" '' Spring Stop Screw

'' Nut Stop Cam with 39629 and 202330

" 11 Interlocking Rod

" 11 Guide with

1070C and 1959

Stop Cam Interlocking Rod Guide Set Screw

Stop Cam Interlocking Rod Guide Wash- er {nylon)

Sto,p Cam Interlocking Rod Spring '' n " " " Regu-

lating Thumb Screw

Stop Cam Interlocking Rod Spring Regu- lating Thumb Screw Nut

Stop Cam Oil Packing (wick)

11 11 Pin

Spring (long)

" (short)

Cover with 24954l,two each 9780 and 249542

Stop Cam Spring Cover Position Pin

11 11

" " Screw (2)

Stop Block Screw

Block

" Lever

11 Hinge Screw

" Spring

Set Screw

Tension (side of Arm) Disc

11 11

' ' 11 Regulating Thumb

Nut

Tension (side of Arm) Releaser with 200AL

Tension (side of Arm) Releaser Arm with 50128E

Tension (side of Arm) Releaser Arm Pin

Tension {side of Arm) Releaser Arm Set Screw

Tension (side of Arm) Releaser Set Screw

Tension (side of Arm) Releaser Shaft

II It 11 II

Crank

Tension (side of Arm) Releaser Shaft Crank Ball Screw Stud

Tension {side of Arm) Releaser Shaft Crank Ball Screw Stud Nut Tension (side of Arm) Releaser Shaft

Crank Pin

Tension {side of Arm) Screw Stud

11 11 11 " Spring

PARTS FOR MACHINE No. 71-30 17

No.

249567

Plate 17896

23669 17896 460AL 17896 32012

1560C 39631

1387C 1521E 39632

999F 201F 32572 39633 39634 974F 940F 90C 39635 350554C 201739E 2103 39636 217F 40035 40036 40037 32C

17965 17965 17965 17965 17965 17965 17965 17965 17965 17965 17965 17965 17965 17965 17965 17965 17965 17965 17965 17965 17884 17884 17964 17964 17964 17964 435AL 17964 1520J 17964 40038 17884 39646 17884 228F 17884

Name

Tension (side of Arm) complete, Nos, i:.l3C, 1560C, 7335,8238,23526 and two 2102

Tension {side of Arm) Thread Guard

,, "

"

"

"

Set Screw

Tension (top cover) Disc (2) u •• " Regulating Thumb Nut

Tension (top cover) Releaser

u 11 11 Guide Screw Stud

Tension {top cover) Releaser Guide Screw Stud Nut

Tension (top cover) Releaser Holder with 20 lF

Tension {top cover) Releaser Holder Hinge Screw

Tension (top cover) Releaser Set Screw '' '' Releasing Disc

Lever

" Con- nection

Tension (top cover) Releasing Lever Connection Screw {back}

Tension (top cover) Releasing Lever Connection Screw (front)

Tension (top cover) Releasing Lever Hinge Screw

Tension (top cover) Releasing Pin

" " Screw Stud

" Lock Nut

Tension (top cover) Spring

11 " Thread Eye let

(double)

Tension {top cover) Thread Eyelet Screw

Thread (lower) Cutting Blade

" " Carrier with qoo38

Thread (lower) Cutting Blade Carrier Lever

Thread (lower) Cutting Blade Carrier Lever Hinge Screw

Thread (lower) Cutting Blade Carrier Lever Spring

Thread {lower) Cutting Blade Carrier Lever Spring Screw Stud (2}

Thread (lower) Cutting Blade Carrier Lever Stop Screw

Thread (lower) Cutting Blade Carrier Lever Stop Screw Nut

Thread (lower) Cutting Blade Carrier Stud

Thread (lower) Cutting Blade Friction Plate

Thread (lower) Cutting Blade Friction Plate Screw (2}

18 _PARTS ~OR MACHINE No. 71-30

No.

2~00 2~9831

1351C 1520J 39921

9660 1671C

1350C

~00~8

39609 39610

~00~3 Plate 1788q

1796~

1796~

1796~

1796~

1796~

1796~

1788~

1788~

1788~

17886 17886 17886 17886 209AL 17886

2273 237X

106C 23606 39611 203F 7071

~00~7 6~6F

21699 219F

~00~9

~0050

2269

17886 17886 17886 17886

17886 17886 17886 17886 17886

17886 17886 17886 17886 17886 17886 17886

Name

Thread (lower) Cutting Blade Screw (2)

Thread (lower) Cutting Lever

" " n " Ball Screw

Thread {lower} Cutting Lever Ball Screw Nut

Thread (lower) Cutting Lever Ex- tension

Thread (lower) Cutting Lever Ex- tension Screw

Thread {lower) Cutting Lever Ex- tension Screw Nut

Thread (lower) Pull-off Finger u n " " Guide 'Screw

Thread {lower) Pull-off Finger Hinge Screw

Thread (upper) Clamping Blade

" '' Cutting Blade

" 11 Connecting

Rod

Thread (upper) Cutting Blade Connect- ing Rod Collar (back) with 209AL Thread (upper) Cutting Blade Connect-

ing Rod Collar {back) Set Screw Thread (upper) Cutting Blade Connect-

ing Rod Collar (front) with 237X Thread (upper) Cutting Blade Connect-

ing Rod Collar (front) Pin

Thread (upper) Cutting Blade Connect- ing Rod Collar (front) Set Screw Thread (upper) Cutting Blade Connect-

ing Rod Collar (front) Washer (raw- hide) (2)

Thread {upper) Cutting Blade Connect- ing Rod Hinge Screw

Thread {upper) Cutting Blade Connect- ing Rod Spring

Thread (upper) Cutting Blade Connect- ing Rod Spring Bracket

Thread (upper) Cutting Blade Connect- ing Rod Spring Bracket Screw (2) Thread (upper) Cutting Blade Connect-

ing Rod Spring Bracket Screw Washer (2)

Thread {upper) Cutting Blade Connect- ing Rod Spring Collar with 646F Thread (upper) Cutting Blade Connect-

ing Rod Spring Collar Set Screw Thread (upper) Cutting Blade Position

Pin

Thread (upper) Cutting Blade Screw

11 " " 11 Shaft

with 21699

Thread (upper) Cutting Blade Shaft Crank with 906C

Thread (upper) Cutting Blade Shaft Crank Pin

\ I \

I

I I

PAiHS ~OR MACHINE No. 71-30 19

No. Plate 906C 17886

~0051 1796~

~0052 1796~

1352C 1796~

~0053 1796~

2117C 1796~

6~1C 1796~

~005~ 1796~

~0067 1796~

9660 1796~

39612 1796~

~0057 1796~

7660 1796~

q0058 1796~

206F 1796~

ll~~F 1796~

~0059 1796~

200AL 1796~

~0060 1796~

12~1E 1796~

717AL 1796~

1520J 1796~

2~9692 17896 2280 17896 39711 17896

~60AL 17896 39712 17965

166~E 17965

12~00 17965 39713 17965

12~02 17965

~62AL 17965

3971~ 17965 23523 17968 1036AL 17890 1258AL 17890

2352~ 17968

Name

Thread (upper) Cutting Blade Shaft Crank Set Screw

Thread (upper) Cutting Lever with 6~1C

Thread (upper) Cutting Lever Lock Pin

Thread (upper') Cutting Lever Lock Pin Screw Bushing

Thread {upper) Cutting Lever Lock Pin Spring

Thread (upper) Cutting Lever Pin

" " u ¹¹ Set Screw

Thread (upper) Cutting Lever Shift

n If 11 II II

Bracket

Thread (upper) Cutting Lever Shaft Bracket Screw (4)

Thread (upper) Cutting Lever Shaft Crank with two each 200AL and

~0059

Thread (upper) Cutting Lever Shaft Crank Latch

Thread {upper) Cutting Lever Shaft Crank Latch Hinge Screw Thread (upper) Cutting Lever Shaft

Crank Latch Spring

Thread (upper) Cutting Lever Shaft Crank Latch Spring Screw Thread (upper) Cutting Lever Shaft

Crank Latch Spring Screw Thread (upper) Cutting Lever Shaft

Crank Latch Stop Pin

Thread (upper) Cutting Lever Shaft Crank Set Screw

Thread (upper) Cutting Lever Spring

II II 11 11 II

Screw Stud (2)

Thread (upper) Cutting Lever Stop Screw

Thread (upper) Cutting Lever Stop Screw Nut

Thread (upper) Guider---

11 " 11 Screw {2)

Guiding Stud (side of Arm) n " Set Screw Retainer Holder with 462AL

Nut Sleeve Spring Stud

" Set Screw

Thread Retainer complete, Nos ,1664E, 12~00,12~02, 39712 and 39713 Thread Take-up Crank

" " Position Screw

•• " Set Screw Lever

20

No, 350553C 201528F 262042 249915 222598

PARTS FOR MACHINE No. 71.30

Plate 17968 17968 17968 17968 17968

Name

Thread Take-up Lever Adjusting Screw

II 1! II II II

Nut

Thread Take-up Lever Link

•• 11

" 11 Hinge Pin

with 222598

Thread Take-up Lever Link Hinge Pin Oil Packing (wick)

435AL 17968 Thread Take-up Lever Link Hinge Pin Set Screw

262043 4784 7335 23526 446C

17968 17968 17896 17896 17896

Thread Take-up Lever complete, Nos.

23524, 201528F, 262042 and 350553C Thread Take-up Lever Oil Pad

11 11 Spring

" " Regulator n Set Screw

SINCER Needles should be used in SINCER Machines These Needles and their Containers

are marked with the

Company's Trade Mark "SIMANCO.**" 1

Needles in Cont:ainers marked

"FOR SINGER MACI-IINES"

are NOT

SINGER

made needles. 2

21

MACHINE No. 71-31

MAKES PURL STITCH BUTTONHOLES WITH WIDE BARRED I:'NDS. KNIVtS FROM

%

TO

3,4

INCH

LONG. CUTS BOTH THRtADS AND THt HOLt AUTOMATICALLY AFTtR

STITCHING.

LOW SPtED MACHIN!:=. POSITIVE FttD CLUTCH.

No, 23632 39643

262041

39579

Same as Machine No, 71-30 with the following exceptions:

Plate Name

17907 Needle Bar Frame Bell Crank with 1956 and 15072, in place of 23558 17907 Needle Bar Frame Connection with

1963 and 39616 to 39618,in place of 39622

17907 Needle Bar Frame Connection 396'*3

17907

with 78C and 1226E, in place of 39926

Needle Bar Frame Connection Stud (eccentric) in place of 2l.,a9600

22

No.

23527 23530 23/;/;5 23/;/;7 23/;51 7lxl 1203/;6 1203/;7 11831 259/;77 26/;85 23500 /;0035 /;00/;8 39609 10875 2165/;

23535 2/;9820

2791/;

27915 389F 15072 27916 2808/;

27302 503560

1620J 27917 27918

*

278/;9 27538

*27850 /;1828 27919 350 26203/;

Plate 17938 17970 17967 17967 17967 17970 17970 17970 17970 17970 17969 1788/;

17886 17886 17970 17970 17970 17970

ACCESSORIES

Name

Drip Pan with two wood screws 1/2 in.,No.S,R.H.B,

Gauge. for 1/~ to 1 in,, for setting length of buttonhole

Knife, 3/8 inch 1/2 inch 3/4 inch

Needles, three each, sizes 14 and 16 Oiler (copper plated) with 1203~7

'' Spout (8-1/2 in. long) Screw Driver, 5 in. blade (machine,

large)

Screw Driver {machine, small) n " (Shuttle Tension) Shuttle Bobbin (2)

Thread (lower) Cutting Blade

11 {upper) Clamping Blade ,, '' Cutting Blade Wrench, for 1518 and 1520

" 1508and 1638

1671, for regulating length of buttonhole

Wrench, for 350415C

BOBBIN WINDER

(SWINGING AUTOMATIC, RIGHT HAND)

17971 17971 17971 17971 17971 17971 17971 17971 17971 17971 17971 17971

17971 17971 17971 17971

Base with 27916 and two 28084 Plate

11 Screw Bobbin Position Pin Brake (leather)

" Rivet Frame

Hinge Screw

u ¹¹ Nut

Spring Pulley Spindle

•• 27849 with 15072,27850 and 41828

Spindle Collar

" " Pin Stop Latch

11 " Hinge Screw

Tension Bracket with 452AL

'·

No.

262053

2/;55 1562J

/;180 101/;1 IOI/;5 5989

Plate 17971

17971 17971 17971 17971 17971 17971 27922 17971 /;52AL 17971 2/;9693 17971 1620J 17971 27923 17971

262054

228320 228330

39571 2368/;9 106/;D 236850

39575 39576 23551 250/;08 232982 2283/;7 2283/;8 228333 39575 39576 2283/;9

39571 228/;9/;

2368/;9 106/;0

17971

18261 18261

18261 18261 18261 18261

18261 18261 18261 18261 18261 18261 18261 18261 18261 18261 18261

18261 18261 18261 18261

ACCESSORIES

Name

Tension Bracket with Rod complete, Nos.1620J,5989,10145,27922 2/;9693 and 26203/;

Tension Disc

Regulating Thumb Nut Screw Stud

Spring Thread Guide

Tension complete, Nos .418D, 1562J, 10141 and two 2455

Thread Eye let Rod

, " u Set Screw Leader

Lock Nut

Bobbin Winder, Nos. 35D, 1620J, 27302, 27538,27914,27917 to 27919 and 503560

Bobbin Winder (swinging automatic, right hand) complete, Nos. 27915, 27923, 262053 and two 389F

DRIVING EQUIPMENT

Bed Frame Cushion (felt}

Clamp Lifting Chain, 46 in,long, with 39575 and 39576 (for right hand machine)

Clamp Lifting Chain Guide Pulley 23

n u ,. ¹¹ Bracket

11 Hinge Screw

Clamp Lifting Chain Guide Pulley Bracket complete, Nos. l064D, 39571, 236849 and two wood screws 1-1/4 in,No,12, R.H.B.

Clamp Lifting Chain Hook (large)

11 " " ·• (small)

u " Screw Eye

Machine Rest (high) with 232982 and two wood screws 1 in., No,l2 Machine Rest Cushion (leather) Starting Chain (lower) 10-1/2 in,long

11 " (upper) 27 in. long

11 Cushion Spring Hook (large)

" (small)

Starting Chain complete, Nos. 228333, 228347, 228348, two each 39575 and 39576

Starting Chain Guide Pulley (large) ,, " ,. " (small)

!I II II

Bracket

Starting Chain Guide Pulley Hinge Screw

24

No.

236850

228495

228500 14372 51074R 46709 67425 23250 1/;373 50581R

2718R 17881 1437/;

14375 228757

228496

39910

24106 84E 19226 19398 19397 211E 16555 14010 39911 39912 200574E 201655X 39913

Plate 18261

18261

18261 18261 18261 18261 18261 18261 18261 18261 18261 18261 18261 18261 18261

18261

17938

17938 17938 17938 17938 17938 17938 17938 17938 17938 17938 17938 17938 17938

ACCESSORIES

Name

Starting Chain Guide Pulley Bracket (large) complete, Nos,l064D, 39571, 236849 and two wood screws 1-1/4 in,,No,l2,R.H,B,

Starting Chain Guide Pulley Bracket (small) complete,Nos.l064D, 228491:1:, 236B!t9 and two wood screws

1-1/1::1: in,,No.l2,R,H,B,

Table Extension with two wood screws 2-1/2 in,, No. 12

Treadle Bolt

'' 5107ltR with 23250 and 67/;25

Treadle Bolt Lock Washer Washer Extension

Shaft Spring Stand

Screw Washer

Treadle complete,Nos.2718R,l4372 to 14375, 17881, 50581R and two 1;6709

Driving Equipment complete, for Motor Drive (without use of belt idlers) for use with Table 205295 and Stand No.46998,Nos.228330,2283/;9, 228495, 228500, 2501:108, two each 23551,228757,three 236850 and four 228320

IRON BASE

Bed Frame with two each 16555, 19398, four each 84:E, 24:106, six 14:010 and four wood screws 1-1/4: in,, No, 12 Bed Frame Cushion (felt)

11 11 Screw Hinge Connection

" " 19226 with 211E and 19397

Bed Frame Hinge Connection Cap

n 11 " Screw

11 Plate

" Rivet

Splash Guard with 201655X

" " Hinge

11 Screw

11 Locking Screw Wing Nut Bed Frame and Splash Guard complete,

Nos.39910, 399ll,two 39912 and eight 200574:E

No. Plate 228764 13537 228766 13537 150203 13537 228767 13537 201254C 13537 228768 13537 228769 13537 228770 13537 228774 13537 228776 13537

ACCESSORIES

THREAD UNWINDER

(FOR TWO SPOOLS)

Name Spool Pin

" Rest (for two spools) (flat) with 201254C

Spool Rest Cushion (felt)

II II Rod

Set Screw Stand

Thread Guide

Holder (for one or two guides)

Thread Guide Rod

Thread Unwinder (for two spools) complete, Nos. 228766 to 228768, 228770, 228774:, two each 150203, 228764:,228769 and three wood screws 7/8 in., No. 12

CLAMP PARTS

25

FOR COLLARS AND CUFFS, SHIRT NECK BANDS AND BOSOMS AND LADIES WAISTS

39647 39731 39732

39650 337B 249749

17901 17901 17901

17901 17901 17901 212D 17901 237F 17901 39715 17901 1296AL 17901 39733 17901 50138F 17901 1348E 17901 1296AL 17901 3973/; 17901 39735 17901 21699 17901 219F 17901

Clamp Arm

11 Check with 134:8E, 39733 and two 50138F, for 3/8 to 3/l:. in. buttonholes Clamp Check complete, for 3/8 to 3/4:

in. buttonholes, Nos. 219F, 2269, 39731, 3973/;, 39735, 400l,9 and 40050 Clamp Check Holder

11 " " Adjusting Screw

11 II II

Friction Plate

Clamp Check Holder Hinge Cap Screw

11 11 Stop Screw n " " Washer

Screw (2)

"

Section and Cutting Plate

II II II II

Screw

Clamp Check Section and Cutting Plate Support Stud

Clamp Check stop Screw Thread (upper) Clamping Blade

" " Cutting Blade

n ¹¹ Position Pin

11 11 Screw

26

2269 906C

Plate 17901 17901 17901 17901

CLAMP PARTS

Name

Thread {upper) Cutting Blade Shaft with 21699

Thread (upper) Cutting Blade Shaft Crank with 906C

Thread (upper} Cutting Blade Shaft Crank Pin

Thread {upper) Cutting Blade Shaft Crank Set Screw

DRIVING I:QUIPMI:NT

FOR MACHINES WHEN SET IN PAIRS

228320 228321 361C 2281,81 228323 355C 126910 228321,

355C 2281,82 228326 203100

17903 17903 17903 17903 17903 17903 17903 17903

17903 17903 17903 17903 858AL 17903 355C 17903 228327 17903 228328 17903

228329 17903

228330 17903

39571 17903 23681,9 17903 1061,0 17903

Bed Frame Cushion (felt) Belt Idler Belt Guide with 361C

"

^{II "} Set Screw

"

Pulley with 228482

11 Bracket with three 355C

Belt Idler Pulley Bracket Set Screw

1 1 1 1 " " S h a f t

'' '' Hanger

with two 3SSC and three wood screws 1 in.,No.l2

Belt Idler Pulley Bracket Shaft Set Screw

Belt Idler Pulley Bushing {bronze oil- less bearing)

Belt Idler Pulley Shaft with 858AL and 203100

Belt Idler Pulley Shaft Oil Packing (wick)

Belt Idler Pulley Shaft Oil Stop Screw

" '' '' Set Screw

'' Washer (rawhide)

Belt Idler complete, Nos.126910, 228321:1, two each 228321, 228323, 228326, 2281:181, four 228327 and Form All27

Clamp Lifting Chain, 31:1 in.long, with 39575 and 39576 (for left hand machine)

Clamp Lifting Chain,l:l6 in,long, with 39575 and 39576 (for right hand machine)

Clamp Lifting Chain Guide Pulley (large)

Clamp Lifting Chain Guide Pulley Bracket

Clamp Lifting Chain Guide Pulley Hinge Screw

No.

236850

2281,9/<

2281,95

39575 39576 23551 228331 39810 228332 6337 356C 356C 228333

39575 39576 228331, 228335

21327 6335 2766 356C 1509E 6336 2767 150668 356C 228337

Plate 17903

17903 17903

17903 17903 17903 17903 17903 17903 17903 17903 17903 17903 17903 17903 17903 17903

17903 17903 17903 17903 17903 17903 17903 17903 17903 17903

• DRIVING ~QUIPM~NT 27

Name

Clamp Lifting Chain Guide Pulley Bracket (large) complete, Nos, 1061:10 39571,23681:19 and two wood screws 1-1/1:1 in.,No,l2,R,H,B,

Clamp Lifting Chain Guide Pulley (small)

Clamp Lifting Chain Guide Pulley Bracket (small) complete, Nos. 1061:10, 2281:191:1, 23681:19 and two wood screws 1-1/1:1 in.,No,12,R,H.B,

Clamp Lifting Chain Hook (large)

II II II II (small)

11 Screw Eye Front Plank Extension with two wood

Screws 2-1/2 in,, No, 11:1 Knee Starting Rock Shaft

II II II

Connecting Rod

Knee Starting Rock Shaft Connecting Rod Bracket with two 356C Knee Starting Rock Shaft Connecting

Rod Bracket Set Screw

Knee Starting Rock Shaft Connecting Rod Set Screw

Knee Starting Rock Shaft Connection Cushion Spring

Knee Starting Rock Shaft Connection Hook (large)

Knee Starting Rock Shaft Connection Hook (small)

Knee Starting Rock Shaft Connection Spring

Knee Starting Rock Shaft Connection complete, Nos, 39575,39576, 228333 and 228331:1

Knee Starting Rock Shaft Hanger with two wood screws 1 in, , No. 10 Knee Starting Rock Shaft Knee Arm

with 1509E

Knee Starting Rock Shaft Knee Arm Hub with 356C

Knee Starting Rock Shaft Knee Arm Hub Set Screw

Knee Starting Rock Shaft Knee Arm Lock Nut

Knee Starting Rock Shaft Knee Arm com- plete, Nos. 2766, 2767 and 6335 Knee Starting Rock Shaft Knee Plate

with 356C

Knee Starting Rock Shaft Knee Plate Pad (rubber)

Knee Starting Rock Shaft Knee Plate Set Screw

Knee Starting Rock Shaft Position Spring

28 DRIVING EQUIPMENT

No. Plate Name

228338 17903 Knee Starting Rock Shaft Position '<5'<AL 17903

Spring Adjusting Collar with 454AL Knee Starting Rock Shaft Position 2770 17903

Spring Adjusting Collar Set Screw Knee Starting Rock Shaft Stop Dog

with 140219C

1'<0219C 17903 Knee Starting Rock Shaft Stop Dog Set Screw

228339 17903 Knee Starting Rock Shaft complete, Nos.2770,6336,6337,39810, 150668, 228332,228335,228337,228338 and two 21327

250'<08 17903 Machine Rest (high) with 232982 and two wood screws 1 in. No.l2 232982 17903 Machine Rest Cushion (leather)

1'<372 17903 Treadle

1'<373 17903 Extension

50581R 17903 Screw

2718R 17903 Washer

17881 17903 Shaft

1'<37'< 17903 Spring 1'<375 17903 Stand

1"376 17903 Treadle complete, Nos, 2718R, 14372 to 14375,17881, 50581R and two wood screws 1-1/4 in.,No.l2 F,H, 228355 17903 Driving Equipment, less shaft pulley

(for Machines set in pairs) com- plete, Nos. 228329 to 228331,228495, 236850, 250408, two each 14376, 23551, 228328, 22 8339, eight 228320 and two blue prints

GUID~S

23.36 17902 Guide (back) for cuffs 2"973" 17902

"

for shirt bands

235"9 17902

"

^bosoms

23,,1 17902

"

(corner) for collars 23lo39 17902 (left) for collars 23'<37 17902

"

for cuffs 23,,0 17902 (right) for collars 23.38 17902

"

for cuffs

1238F 17902 Screw

KNIV~S 23""5 17967 Knife, 3/8 inch 23,,6 17967 ¹¹ 7/16 inch 23,,7 17967 1/2 inch 23 .... 8 17967 11 9/16 inch 23,,9 17967 5/8 inch 23.50 17967 ¹¹ 11/16 inch

No.

23.51 23.52 23.53 23,5'<

23.55 Plate 17967 17967 17967 17967 17967

KNIVES

Knife, 3/4 inch

11 13/16 inch

" 7/8 inch 15/16 inch 1 inch

Name

MISC~LLAN~OUS PARTS

29

USED IN CONJUNCTION WITH THREAD UNWINDER

60913 6091"

27739 225390

13537 13537 13537 13537

Spool Weight with 60914 '' n Center Pin Thread Cone (wood)

" " Holder

SINGER Needles should be used in SINGER Machines These Needles and their Containers

are marked with the

Company's Trade Mark "SIMANCO.*•"

1

Needles in Containers marked

"FOR SINGER MACHINES"

are NOT SINGER made needles.

2

(

I 1: ,,

No, 32C 35D l,1c 52C 52C 5l,C 59D 61C 67D 78C 78D 8qE 90D 90C 90C 90C 93X 106C 106C 123E 121,c 12qC 135D 1q5F 157F 157D 157C 159F 162D 168D 1750 179E

31

NUMERICAL LIST OF PARTS

Plate 17961, 17971 1796"

17882 17883 17967 1796"

17893 17882 17963 17882 17938 17882 17967 17967 17965 17963 1788q 17886 17893 17963 17893 17971 17969 1796"

17967 17967 17893 1796"

17967 17882 17883

Name

Thread (lower) Cutting Blade Carrier Lever Hinge Screw

Bobbin Winder Stop Latch Hinge Screw, for 27923

Clamp Lifting Arm Connection Hip.ge Screw

Clamp Carrier Connecting Rod Hinge Screw

Feed Wheel Driving Lever Plate Screw, for 2~9560

Knife Bar Driving Lever (intermediate) Connecting Link Hinge Screw Clamp Lifting Arm Stop Pitman Hinge

Screw

Starting Lever Rod Hinge Screw Clamp Carrier Slide Lever Regulator

Screw

Needle Bar Frame Connection Hinge Screw, for 39926 and 262041 Stop Lever Hinge Screw

Bed Frame Cushion Screw, for 39910 Feed Hand Ratchet Lever Pawl Hinge

Screw, for 39997

Knife Bar Disengaging Lever Catch Hinge Screw

Knife Bar Disengaging Lever Hinge Screw

Tension (top cover) Releasing Lever Hinge Screw

Barring Ratchet Pawl Spring Screw Thread (lower) Pull-off Finger Guide

Screw

Thread (upper) Cutting Blade Connec- ting Rod Hinge Screw

Starting Lever Bracket Screw Barring Lever Stop Screw Starting Lever Stop Screw

Bobbin Winder Tension Bracket Screw Shuttle Race Screw

Clamp Lifting Arm Connection Roller and Screw Stud Bracket Screw Knife Bar Disengaging Lever Catch

Bracket Screw Knife Holder Screw

Starting Lever Belt Shifter Screw Clamp Lifting Arm Stop Bracket Screw Knife Bar Stop Retainer Plate Screw

11 n Disengaging Lever Catch Tripping Point Screw

Feed Wheel Tripping Lever Stop Screw

32 NUMERICAL LIST OF PARTS

No. Plate 1810 17966 185X 17883 1900 17965 1900 17881 1900 17883 190C 17968 191C 17885 191C 17967 193F 17963 196F 17885 196E 17883 196F 17963 1990 17886 200AL 17896 200AL 17961, 201F 17965 203C 17963 203C 17883 203E 17969 203F 17886 206F 17961, 207F 17885 207E 17882 209AL 17886 211E 17938 2120 17901 2170 17881 217F 17965 219F 17885 219F 17886 2200 17883 2230 17882 226J 17890 228F 17881, 2280 17896 2290 17961, 2290 17893

Name Feed Rock Shaft Spring Screw

11 Wheel Driving Lever Screw, for 21,9562

Arm Side Cover Screw Face Plate Screw (upper)

Feed Wheel Tripping Lever Spring Screw Needle Bar Frame Pitman Adjusting

Screw, for 23611 Clamp Arm Bracket Screw Knife Screw

Barring Ratchet Wheel Tripping Point Screw

Clamp Arm Hinge Block Pin Set Screw, for 39584

Feed Wheel Driving Lever Pitman Cap Screw, for 249561

Needle Bar Frame Connection Stud Set Screw

Clamp Lifting Arm Screw

Tension (side of Arm) Releaser Set Screw, for 23519

Thread (upper) Cutting Lever Shaft Crank Set Screw, for 39612

Tension (top cover) Releaser Set Screw, for 39632

Barring Ratchet Retaining Pawl Adjusting Screw, for 235!t6

Feed Wheel Tripping Lever Point Screw Shuttle Race Plate Screw, for 21t9596 Thread (upper) Cutting Blade Connecting

Rod Spring Bracket Screw

Thread (upper) Cutting Lever Shaft Crank Latch Spring Screw

Clamp Arm Bracket Guide (right) Screw Feed Hand Ratchet Lever Pawl Point

Screw, for 39996

Thread {upper) Cutting Blade Connecting Rod Collar (back) Set Screw, for !tOO!t3 Bed Frame Hinge Connection Cap Screw,

for 19398

Clamp Check Holder Hinge Cap Screw Face Plate Screw (lower)

Tension (top cover) Thread Eyelet Screw Clamp Arm Bracket Guide (left) Screw Thread (upper) Cutting Blade Screw, for

39693, 39691, and 39732

Feed Wheel Tripping Point Screw, for 23698 and 39552

Clamp Carrier Slide Lever Regulator Cap Screw

Oscillating Shaft Crank Slide Block Cap Screw, for 2!t050

Thread (lower) Cutting Blade Friction Plate Screw

Thread {upper) Guide Screw

Clamp Lifting Arm Connection Roller Cap Screw, for 1901

Knife Bar Driving Lever {intermediate) Roller Cap Screw, for 1959

NUMERICAL LIST OF PARTS 33

No. Plate 2290 17963 2330 17883 237F 17901 237X 17886 237X 17886

21,00 17963 21,00 17882 21,00 17881, 337B 17901 355C 17903 355C 17903 355C 17903 356C 17903 356C 17903 356C 17903 356C 17903 361C 17903 375C 17966 389F 17971 389F 17971 3990 17969 1,020 17885 1,020 17885 I,OI,O 17882 I,OI,O 17885 I,OI,O 17881, I,13C 17896 1,180 17971 I,35AL 17890 435AL 17961, I,35AL 17968 1,1,6c 17896 I,I,8AL 17890 I,I,8AL 17966

Name

Needle Bar Frame Bell Crank Roller Cap Screw, for 1956

Feed Wheel Retaining Clutch Spring Screw

Clamp Check Holder Stop Screw

" 11 Section and Cutting Plate

Screw, for 39606 and 39639 Thread {upper) Cutting Blade Connect-

ing Rod Collar (front) Set Screw,for I,QOI,I,

Barring Ratchet Retaining Pawl Spring Screw

Clamp Carrier Regulator Stud Stop Screw, for !tOOlO

Thread (lower) Cutting Blade Screw Clamp Check Holder Adjusting Screw Belt Idler Pulley Bracket Set Screw, for

228323

Belt Idler Pulley Bracket Shaft Set Screw for 22832!t

Belt Idler Pulley Shaft Set Screw, for 228323

Knee Starting Rock Shaft Connecting Rod Bracket Set Screw, for 6337

Knee Starting Rock Shaft Connecting Rod Set Screw, for 6337

Knee Starting Rock Shaft Knee Arm Hub Set Screw, for 2766

Knee Starting Rock Shaft Knee Plate Set Screw, for 2767

Be 1t Idler Be 1t Guide Set Screw, for 228321

Feed Connecting Rod {lower) Hinge Screw

Bobbin Winder Base Plate Screw Screw, for 262054 Shuttle Bobbin Case Position Plate

Screw, for 21t9596 Clamp Arrrt Screw

11 Plate Support Screw

Carrier Block Plate Screw, for 1,0006

Clamp Carrier Plate Screw {front) Needle Plate Screw

Tension (side of Arm) Screw Stud, for 21,9567

Bobbin Winder Tension Screw Stud, for 5989

Arm Shaft Flanged Bushing {back) Set Screw

Thread (lower) Cutting Blade Carrier Lever Stop Screw

Thread Take-up Lever Link Hinge Pin Set Screw

Thread Take-up Spring Regulator Set Screw

Feed Eccentric Set Screw, for 23412 Rock Shaft Hinge Pin Set Screw