Form 3105w
(354)
Prinled in U. S. A.
LIST
OF
PARTS
SINGER
MACHINES Nos.
240wl, 240w2 and 240w4
IKE SINGER lUNUFUCTURIHG COMPANV
INSTRUCTIONS FOR OILING
To insure easy running and prevent unnecessary wear of ports which are in movable contact, the machine requires oiling.
Use "TYPE C" OIL, sold by Singer Sewing Machine Company.
BEFORE STARTING THE MACHINE, fill reservoir to "high"
mark on sight gauge, as instructed in Form 3093W.
Check oil level when machine is not running. Never allow level to drop below "low" mark on sight gouge.
The addition of oil should not be necessary more than once every few months.
Copyright, U. S. A., 1947, 1953 and 1954 by The Singer Manufacturing Company
All Rights Reserved for all Countries
INDEX
Page
Accessories. 12
Attchments and Accessories 13
Cloth Plates JJ*
Finger Guard 14
Fittings 14
Foot Lifters 15 & 16
Knee Lifter 12
Machine No.240wl.
Machine No. 240w2.. 10
Machine No. 240w4 ^ 4 ? 11
Numerical List of Parts 17
Thread Unwinder 13
INSTRUCTIONS FOR ORDERING
In ordering from this list, use ONLY the PART number in
the FIRST column.
The number stamped on a Sewing Machine Part is the number of the Single Part only, except when the part includes Set Screws, Clamping Screws, Studs and Rollers Spun on. Small Wires riveted, or Ports soldered together, etc., which it is necessary to furnish in combination.
Every combination of ports sent out has its specific number which, although not stamped on Ports (except in above cose), must be used when ordering the combination.
Each number always indicates the SAME PART in what ever list it appears, or for whatever Machine.
The letters after some of the numbers indicate the style of finish only, as follows:
A—Hardened, Polished, Nickel Plated and Buffed.
AL—HeatTreated for Toughness.
ALX—HeatTreated for Toughness and Black Oxide.
B—Polished, Nickel Plated and Buffed.
C—Hardened only.
D—Polished only.
E—Soft, Not polished.
F—Hardened and Polished.
J—Nickel Plated only.
R—Merlized.
X—Black Oxide, for Iron and Steel.
XC—Hardened and Black Oxide, for Iron and Steel.
Y—Black Nickel Plated only.
Z—Chromium Plated.
These letters MUST BE USED when they appear in the list and AFTER the number, as in the list.
In this series
1 to 1500, 200001 to 201500 and 350001 to 351500 are Screw Numbers.
1501 to 1800, 201501 to 201800 and 351501 to 351800 are Nut Numbers.
1801 to 2000, 201801 to 202000 and 351801 to 352000 are Roller Numbers.
2001 to 50000 and 202001 to 350000 are Numbers of Machine Parts.
The figures in the second column refer only to the plate in which the illustration of the port is shown and are NOT TO BE USED in ordering.
Two or more numbers over a cut indicate that the differ
ence between such parts is not visible in an illustration.
Ports marked with an asterisk (*) are furnished only when
repairs are made at the factory.
LIST OF PARTS COMPLETE
, 5*0*1^
A\ACHINE No. 240wl
HIGH SPEED. SINGLE NEEDLE.
SINGLE THREAD CHAIN STITCH.
DROP FEED. NEEDLE BAR TAKE-UP.
ROTARY LOOPER. THREAD NIPPER.
PLAIN TENSION.
FOR NECKTIE HEMMiN©, UMBRELLA SEAMIN©
AND GENERAL STITCHIN© ON LieHT AND MEDIUM WEIGHT FABRICS.
No. Plate Name
2'*3601P 15608 Cloth Plate
Note: Cloth Plate 2'*3601X will be furnished in place of 2l*3601P if so specified on order,
21*3602 15608 Cloth Plate Gasket 222119X 15608 " " Position Pin
691X 15608 " " Screw (3) 25878 15609 Edge Guide
51224B 15609 " " Thumb Screw 243614P 15606 Face Plate
200166X 15606 " " Screw (2)
243615 15605 Feed Bar with 200394C and 243634
PARTS FOR A\ACH1NE No. 240w!
6 1
No. Plate
200364c 15605 243619 15605 243620 15605 243681 15605 200141F 15605 200394c 15605 243621 15605 243624 15609 243631 15605 202F 15605 176D 15609 243632 15605
243633 15605 243634 15605 243635 15605 243636 15605 243743 15605 243637 15605 243638 15605 243639 15605 243640 15605 200380C 15605
200380C 15605
243641 15605 243642 15605 243643 15605
350555C 15605 243644 15605 200122X 15605
213949 15605
«243645
243646 15602 243745 15602 243647 15602 350366X 15602 243744 15602
200099X 15602 350366X 15601 243648 15603 243736 15603 243649 15608
Name
Feed Bar Carrier Hiage Stud Set Screw
" •' Hinge Stud
" " " " Bearing
" " " " CoUar with 200141F
" " " " " Set Screw
" Set Screw
" " Slide Block
" Dog, for Umbrella Seaming and Necktie Work, for 243715
Feed Dog Adjusting Plate
•t tt .1 .. Screw
" •' Screw
•' Driving Connection Link with 243633
Feed Driving Connection Link Bearing
" " " " Hinge Stud
" " Link with 243636
" " " Bearing
" Lubricating Wick
" Regulating Connection
" " " Hinge Pin
" " Crank
" " " Bushing
" " " " Position Screw
Feed Regulating Crank Bushing Position
Screw Check Screw
Feed Regulating Crank Link with 243642
" " " " Bearing
" " Wheel (indexed) with
243638
Feed Regulating Wheel Lock Screw
" " " " " Lever
X M II 11 11 II
Cap Screw
Feed Regulating Wheel Lock Screw
Washer
Frame with 243665, 244026 and three 222119X
Frame End Cover
" 243646 with 243744 and 350366X
Frame End Cover Gasket
" " " Oil Stop Screw
" •• " " " " Gasket (vellumoid)
Frame End Cover Screw (4)
" Oil Stop Screw Looper
" 243648 with 1368E and 243682
" Safety Guard
PARTS FOR MACHINE No. 240wl
No, Plate
243710 15608
243650 15608 691X 15608 350558X 15603 350559X 15603 243746 15603 243652 15603 243653 15603 243742 15603
200392C 15603
243741 15603 243682 15603 1368E 15603 243604P 15603
243731
Note:
243605P 15603
Machine machine 15603
243732 15603
350419X 243606 243738 200379C 243607 243608 243609 243611 243612
243613 200958X 243654 243655 243656 243657
206758
15603 15603 15603 15603 15603 15603 15603 15603 15603
15603 15603 15601 15601 15601 15601
15601
Name
Looper Safety Guard Compression Spring
Looper Safety Guard Post (2)
" " " Screw (2)
" Set Screw (long)
" " " (short)
" Shaft with 350558X and 350559X
" " Bearing (back)
" " " (front)
" " End Thrust Adjusting Col lar with two 200392C
Looper Shaft End Thrust Adjusting Col
lar Set Screw
Looper Shaft End Thrust Bushing
" Washer
" " Screw
Machine Pulley (aluminum alloy casting)
for 3/8 in,"V" belt (outside diam.of
belt groove 2,6 in,) (rim diam, 3-3/16 in,) with two 200379C Machine Pulley 243604P with 243606and 243738
Pulley 243731 furnished with this unless otherwise specified on order.
Machine Pulley (aluminum alloy casting)
for 5/16 in,ro\ind belt (diam, of belt groove 1-13/32 in,) (rim diam, 3-3/16 in,) with two 200379C
Machine Pulley 243605P with 243606and 243738
Machine Pulley Adjusting Screw
" " Ball Bearing
" " Gasket
" " Set Screw
" " Shaft
" " " 243607 with 243609
" " " Ball Bearing
" " " Sleeve
" " " " 243611 with 243613
Machine Pulley Shaft Sleeve Oil Seal
" •' " " Set Screw Needle Bar with 9611 and 200141F
" " Bushing (2)
" " Connecting Link
« •« " stud with 200086C and 206758
Needle Bar Connecting Stud Oil Packing (wick)
PARTS FOR A\ACHINE No. 240wl
No, Plate Name
243658 15602 Needle Bar Driving Connection with 243659 and 243660
243659 15602 Needle Bar Driving Connection Bushing (lower)
243660 15602 Needle Bar Driving Connection Bushing (upper)
243661 15602 Needle Bar Driving Crank with 200058D 243683 15602 " " " " 243661 with
243606
243606 15602 Needle Bar Driving Crank Ball Bearing
200058D 15602 " " " " Pinch Screw 243662 15602 " " " Shaft with 243740 243684 15602 " " " " 243662 with
243609
243609 15602 Needle Bar Driving Shaft Ball Bearing 200136C 15602 " " " " Oil Stop Screw 243740 15602 " " " " Oiling Wick 243664 15601 " " Oiling Felt
9611 15601 " " Thread Tube 200141F 15601 " Set Screw 243665 15608 Oil Level Indicator 243666 15608 " Reservoir Cover 243667 15608 " " " Gasket 200064X 15608 •• " " Screw (12) 243668 15601 Presser Bar with 2001 lOD 243655 15601 " " Bushing 243673 15601 " " Lifter
200201C 15601 " " " Hinge Screw
243669 15601 " •< Lifting Bracket with 201052C
201052C 15601 " " " " Set Screw 243670 15602 " " " Rock Shaft 202510 15602 " " " " " Collar
with 200141F
200141F 15602 Presser Bar Lifting Rock Shaft Collar
Set Screw
243671 15602 Presser Bar Lifting Rock Shaft Crank
with 200141F
200141F 15602 Presser Bar Lifting Rock Shaft Crank
Set Screw
243747 15602 Presser Bar Lifting Rock Shaft Crank Spring
244026 15601 Presser Bar Lifting Rock Shaft Stop
Pin
208085 15601 Presser Bar Spring 22405 15601 " " " Washer
1121X 15601 " " Thvunb Screw (pressure regulating)
243675 15609 Presser Foot, for Umbrella Seaming and
Necktie Work 200110D 15601 Presser Foot Screw
2102 15606 Tension Disc
PARTS FOR A\ACHINE No. 240wl
No. Plate
13710 15606
350557C 15606 243697 15606 1560C 15606 243696 15606 129052 15606 1623C 15606 129158 15606 129053 15606 19445 15606 129054 15606 50952J 15606 243717 15606
243703 15606 243704 15606 243705 15606 243706 15606 243707 15606 243708 15606 243709 15606 210683 15606 200137X 15606 210993 15606 210992 15606 243711 15606 210958 15606 200397X 15606 243712 15606
243715 15609 244X 15609
Name
Tension Spring
" Stud
" Thread Guide
" Thumb Nut
Tension complete,Nos. I560C( 13710, 350557C and two 2102
Thread Nipper Bushing
" Lock Nut Disc
Plunger
" Pin
Spring
Stud
Thread Nipper complete,Nos, 1623C, 19^115,509521. 129052 to 12905li and two 129158
Thread Nipper Rod
" " " Bushing
" " '• Cap
" " " Operating Sleeve
tl II II II II Plug
'• " " Spring
" " Thread Guide
" Retainer Bracket with 200397X
II " II Screw (2)
II II Sleeve
II II Spring
II 11 Stud
II II II Collar
II II II Set Screw
Thread Retainer Bracket complete,Nos.
210683,210958,210992, 210993 and 2143711
Throat Plate, for 2143624 II II Screw (2)
10
MACHINE No. 240w2
HIGH SPEED. SINGLE NEEDLE.
SINGLE THREAD CHAIN STITCH.
DROP FEED. NEEDLE BAR TAKE-UP.
ROTARY LOOPER. THREAD NIPPER.
GRADUATED ADJUSTABLE THREAD MEASURING DEVICE. PLAIN TENSION.
FOR NECKTIE HEMMING, UMBRELLA SEAMING AND GENERAL STITCHING ON LIGHT AND
MEDIUM WEIGHT FABRICS.
Same as Machine No.240wl with the following
exceptions:
No.
243698
Plate 15607
Name
Thread Measuring Adjusting Knob
(indexed)
Thread Measuring Adjusting Knob Hinge
Screw
Thread Measuring Adjusting Knob Spring
Thread Measuring Pull-off Finger
" " " " Screw
" " Thread Guide
" " " " Hinge
Pin 200241C 15607
243700 15607 243701 15607 200136C 15602 243702 15607 222119X 15607
11
MACHINE No. 240w4
HIGH SPEED. SINGLE NEEDLE.
SINGLE THREAD CHAIN STITCH.
DROP FEED. NEEDLE BAR TAKE-UP.
ROTARY LOOPER. THREAD NIPPER.
GRADUATED ADJUSTABLE THREAD MEASURING DEVICE. LOOPER THREAD CUTTER.
PLAIN TENSION.
FOR LABEL STITCHING.
Same as Machine No.2li0wl with the following exceptions:
No.
243737 243685
Plate 15604 15604 1368E 15604 243687 15610 243686 15610 200138X 15610 243698 15607 200241C 15607
243700 15607
243701 15607 200136C 15602 243702 15607 222119X 15607
Name
Looper 243648 with 1368E and 243685
" Thread Cutter
" " " Screw
Presser Foot with 200138X and 243686, for stitching labels
Presser Foot Spring Guide
II II II It Screw
Thread Measuring Adjusting Knob (indexed)
Thread Measuring Adjusting Knob Hinge
Screw
Thread Measuring Adjusting Knob Spring
Thread Measuring Pull-off Finger
II II II II Screw
" " Thread Guide
•' " " " Hinge
Pin
12
No.
228719 228721 2k X 1 160727
160725 160726 160728 225498 228476 10875
228561 202784 228722 228723
ACCESSORIES
Plate Name
15611 Drip Pan with four each 228721 and wood screws 1-1/4 in.No.8,R.H.B.
15611 Machine Cushion Needles, six, size 11
15611 Oil Container (filled, 5 oz. ,Mfg.oil, light
grade, not stainless) Nos. 160725 and
160726 15611 Oil Container 15611 " " Cap 15611 " " Spout
15611 Screw Driver (7-1/4 in.long)
15611 " Driver 15611 Wrench
15612 15612 15612 15612
KNEE LIFTER
228724 15612
Chain, 11 in.long, with two 202784
" Hook
Rock Lever with 200380C and 350231C
" " Bracket with 200347AL and three wood screws 7/8 in., No. 12 Rock Lever Bracket 228723 with 228722
and 228725 to 228729 Rock Lever Hinge Pin
" '• " " Set Screw
" " Knee Plate with 35023IC
II II II II A.rm
" " " " " Set Screw
" " " " Set Screw
" " Lifting Arm
" " " " Crank with 350231C
Rock Lever Lifting Arm Crank Con
nection
Rock Lever Lifting Arm Crank Set
Screw
Rock Lever Position Spring
•I • " Stop Stud
" " " " Set Screw
Knee Lifter Rock Lever complete, Nos.
228364,228367,228388, 228561, 228724 and Form A1360 228725
200380C 228364 228388 350231C 35023IC 228726 228727
15612 15612 15612 15612 15612 15612 15612 15612
228728 15612
350231C 15612
228729 15612 228367 15612 200347AL 15612 228730 15612
No. Plate 228692 15613 201528X 15613 228693 15613 225259 15613
150203 225388 200383C 201018C 259658 225391 201696X 225326 225324
15613 15613 15613 15613 15613 15613 15613 15613 15613
208AL 15613 225322 15613 225260 15613
ACCESSORIES 13
THREAD UNWINDER
Name
Spool Pin
" " Nut
" " Washer
" Rest (for one spool) (flat) with 201018C,201528X.228692 and 228693
Spool Rest Cushion (felt)
" " Rod
" •• " Set Screw
" " Set Screw
•' Stand with 200383C Thread Guide
" •' Lock Nut
" " Position Cup
" " Rod with 208AL and 225322
Thread Guide Rod Screw It •> !• Washer
Thread Unwinder (for one spool) com
plete, Nos, 150203,201696X, 225259, 225324,225326,225388,225391, • 259658 and three wood screws 7/8 in., No. 12ATTACHMENTS AND ACCESSORIES
350568X 15608 Hold Down Screw 228721 15608 " " " Bushing 243685 15604 Looper Thread Cutter
NECKTIE HEMMERS MACHINES NOS. 240wl and 240w2
120454 15617 Hemmer (plate) 3/32 in.hem
120455 15617 " " 1/8 in.hem1534X 15617 " Thumb Nut
14 ATTACHMENTS AND ACCESSORIES
No.
26029 26361 1534X
Plate 15617 15617 15617
243601P 15608 243601X 15608 243720 15608
SEAMER
Name Seamer with 26361
•* Edge Guide
" Thumb Nut
CLOTH PLATES
Cloth Plate
" Plate
(stainless steel)
FIN6ER GUARD
36822 15617 Finger Guard
36823 15617 " " Friction Washer 104J 15617 " " Hinge Screw 36824 15617 " •• Holder with 228K
228K 15617 " " " Clamping Screw 36825 15617 Finger Guard complete,Nos. 104J and
36822 to 36824
FITTINGS
FOR FLAT WORK243623 15614 Feed Dog. for 243714
243674 15614 Presser Foot
243714 15614 Throat Plate, for 243623
FITTINGS
FOR LINED NECKTIES
No. Plate Name
243625 15614 Feed Dog. for 243716
243674 15614 Presser Foot
243716 15614 Throat Plate, for 243625
FOR UMBRELLA SEAMING
243622 15614 243674 15614 243713 15614
Feed Dog. for 243713
P r e s s e r Foot
Throat Plate, for 243622
FOOT LIFTERS
PARTS REQUIRED TO CHANGE FROM KNEE LIFTER TO FOOT LIFTER
15
228474 15615 Foot Lifter Treadle Chain. 34 in.long,
with two 202784
202784 15615 Foot Lifter Treadle Chain Hook
FOOT LIFTER
FOR STANDS WITH FLAT TREADLE SUPPORT
14372 15615 Treadle 51074R 15615 •* Bolt
46709 15615 " " 51074R with 23250 and 67425 67425 15615 " " Lock Washer
23250 15615 " " Washer 14373 15615 " Extension 50581R 15615 " " Screw
2718 15615 " " •• Washer 17881 15615 " Shaft
14374 15615 " Spring
14375 15615 " Stand
16 FOOT LIFTER
FOOT LIFTER
FOR STANDS WITH TUBULAR TREADLE SUPPORT
No.
152170 152171
51723X 15616 701348 15616 Plate 15616 15616
152080 15616 51089R 15616 51581R 15616
152153 152169
15616 15616
152095 15616
Name Treadle Extension
" '• Swivel Stud
II II II II Nut
II II II II II Lock
Washer
Treadle Position Collar with 51089R
" " " Clamping Bolt with 51581R
Treadle Position Collar Clamping
Bolt Nut
Treadle Spring
Foot Lifter Treadle (pressed steel) with adjustable Extension complete, NOS.51723X,152170,152171 and 701348
Foot Lifter Treadle 152169 with 152153 and two 152080
FOOT LIFTER FOR USE WITH POWER TABLES
14372 18614 Treadle
14373 18614 " Extension 50581R 18614 " " Screw
2718 18614 " " " Washer
17881 18614 '* Shaft
14374 18614 " Spring
14375 18614 " Stand
14376 18614 Foot Lifter Treadle complete, Nos.
2718,14372 to 14375,17881, 50581R
and two wood screws 1-1/4 in.,No.
12,F.H.
17
NUMERICAL LIST OF PARTS
No. Plate
104J 15617 176D 15609 202F 15605 208AL 15613
22 8K 15617
244X 15609 691X 15608 69IX 15608 1121X 15601
1368E 15604 1368E 15603 1534X 15617
1534X 15617 1560C 15606 1623C 15606
2102 15606 2718 15615
9611 15601 10875 15611
13710 15606
Nos 14372 1561.5 14373 15615 14374 15615 14375 15615 14376 18614
14379 15615
17881 15615
Name
Finger Guard Hinge Screw, for 36825 Feed Dog Screw
" " Adjusting Plate Screw
Thread Unwinder Thread Guide Rod Screw, for 225324
Finger Guard Holder Clamping Screw, for 36824
Throat Plate Screw Cloth Plate Screw
Looper Safety Guard Post Screw Presser Bar Thumb Screw (pressure
regulating)
Looper Thread Cutter Screw, for 243737
" Washer Screw, for 243736 Hemmer Thumb Nut, for Machines Nos.
240wl and 240w2 Seamer Thumb Nut
Tension Thumb Nut, for 243696 Thread Nipper Bushing Lock Nut, for
243717
Tension Disc, for 243696
Foot Lifter Treadle Extension Screw Washer, for 14376 and 14379 Needle Bar Thread Tube, for 243654
W rench
Tension Spring, for 243696
14372 to 14375, for 14376 and 14379 Foot Lifter Treadle
•' " " Extension
" " " Spring
" " " Stand
Foot Lifter Treadle complete(for use with Power Tables) Nos.2718,14372 to 14375, 17881, 50581R and two wood screws 1-1/4 in. ,No. 12, F.H.
Foot Lifter Treadle complete (for Stands with Flat Treadle Support) Nos.2718
14372 to 14375,17881,50581R and two 46709
Foot Lifter Treadle Shaft, for 14376 and' 14379
18 NUMERICAL LIST OF PARTS
No. Plate Name
23250 15615 Foot Lifter Treadle Bolt Washer, for 46709
25878 15609
Edge Guide,for Machines Nos. 240wl
and 240w2 26029 15617 Seamer with 26361
26361 15617 " Edge Guide, for 26029
Nos.36822 to 36824, for 36825 36822 15617 Finger Guard
36823 15617 " " Friction Washer 36824 15617 " " Holder with 228K 36825 15617
Finger Guard complete,Nos. 104J and
36822 to 36824
46709 15615 Foot Lifter Treadle Bolt 51074R with 23250 and 67425, for 14379
50581R 15615 Foot Lifter Treadle Extension Screw, for 14376 and 14379
50952J 15606 Thread Nipper Stud, for 243717
51074R 15615 Foot Lifter Treadle Bolt, for 46709 51089R 15616 It n M Position Collar
Clamping Bolt with 51581R, for
152080
51224b 15609 Edge Guide Thumb Screw, for Machines Nos.240wl and 240w2
51581R 15616 Foot Lifter Treadle Position Collar Clamping Bolt Nut, for 51089R 51723X 15616 Foot Lifter Treadle Extension Swivel
Stud Nut, for 152169
67425 15615 Foot Lifter Treadle Bolt Lock Washer, for 46709
120454 15617
Hemmer (plate) 3/32 in.hem,for Neck
tie work, for Machines Nos.240wl and 240w2120455 15617
Hemmer (plate) 1/8 in.hem, for Neck
tie work, for Machines Nos.240wl and 240w2Nos.129052 to 129054, for 243717 129052 15606 Thread Nipper Bushing 129053 15606 " " Plunger 129054 15606 " " Spring
129158 15606 " " Disc, for 243717 150203 15613 *' Unwinder Spool Rest Cushion
(felt) for 225260
152080 15616 Foot Lifter Treadle Position Collar with 51089R,for 152095
152095 15616 Foot Lifter Treadle 152169 with 152153 and two 152080
152153 15616 Foot Lifter Treadle Spring, for 152095
NUMERICAL LIST OF PARTS 19
No.
152169
Plate 15616
152170 15616
152171 15616
160725 15611 160726 15611 160727 15611
160728 15611 200058D 15602
200064X 15608 200086C 15601
200099X 15602 200110D 15601 200122X 15605
200136C 15602
200136C 15602
200137X 200138X
15606 15610
2001'*1F 15605
20011*1F 200141F
15601 15602
2001'ilF 15602
200166X 200201C 2002iilC
15606 15601 15607
2003'*7AL 15612
20036110 15605 200379C 15603
Name
Foot Lifter Treadle (pressed steel) with adjustable Extension complete (for Stands with Tubular Treadle Support) NOS.51723X, 152170, 152171 and 701348, for 152095
Foot Lifter Treadle Extension, for 152169
Foot Lifter Treadle Extension Swivel Stud, for 152169
Oil Container, for 160727
•' " Cap. for 160727 Oil Container (filled, 5 oz.,Mfg.oil.
light grade, not stainless) Nos. 160725
and 160726 Oil Container Spout
Needle Bar Driving Crank Pinch Screw, for 243661
Oil Reservoir Cover Screw
Needle Bar Connecting Stud Pinch Screw.
for 243657
Frame End Cover Screw Presser Foot Screw, for 243668 Feed Regulating Wheel Lock Screw
Lever Cap Screw
Needle Bar Driving Shaft Oil Stop Screw, for Machine No.240wl
Thread Measuring Pull-off Finger Screw, for Machines Nos.240w2 and 240w4
Thread Retainer Bracket Screw Presser Foot Spring Guide Screw,
for 243687
Feed Bar Hinge Stud Collar Set Screw, for 243681
Needle Set Screw, for 243654
Presser Bar Lifting Rock Shaft Collar Set Screw, for 202510
Presser Bar Lifting Rock Shaft Crank Set Screw, for 243671
Face Plate Screw
Presser Bar Lifter Hinge Screw Thread Measuring Adjusting Knob Hinge
Screw, for Machines No8.240w2 and 240w4
Knee Lifter Rock Lever Stop Stud Set Screw, for 228723
Feed Bar Carrier Hinge Stud Set Screw Machine Pulley Set Screw, for 243604P
and 243605P
20 NUMERICAL LIST OF PARTS
No.
200380C
200380C
200383C
200392C 200394c 200397X
200958X 201018C
201052C
201528X
201696X 202510
202784
202784 206758
208085 210683
210958 210992 210993 213949 222119X 222119X
Plate 15605
15612
15613
15603
15605
15606
15603 15613
15601
15613
15613
15602
15615
15612 15601
15601 15606
15606 15606 15606 15605
15608 15607
225259 15613
225260 15613
225322 15613
225324 15613
Name
Feed Regvilating Crank Bushing Position
Screw Check Screw
Knee Lifter Rock Lever Hinge Pin Set Screwt for 228722
Thread Unwinder Spool Rest Rod Set Screw, for 259658
Looper Shaft End Thrust Adjusting Col lar Set Screw, for 243742
Feed Bar Hinge Stud Set Screw, for
243615
Thread Retainer Stud Set Screw, for 210683
Machine Pulley Shaft Sleeve Set Screw Thread Unwinder Spool Rest Set Screw,
for 225259
Presser Bar Lifting Bracket Set Screw, for 243669
Thread Unwinder Spool Pin Nut, for 225259
Thread Unwinder Thread Guide Lock Nut, for 225260
Presser Bar Lifting Rock Shaft Collar with 200141F
Foot Lifter Treadle Chain Hook, for 228474
Knee Lifter Chain Hook, for 228561 Needle Bar Connecting Stud Oil Packing
(wick) for 243657 Presser Bar Spring
Thread Retainer Bracket with 200397X, for 243712
Thread Retainer Stud Collar, for 243712
" " Spring, for 243712
" " Sleeve, for 243712 Feed Regulating Wheel Lock Screw
Washer
Cloth Plate Position Pin, for 243645 Thread Measuring Thread Guide Hinge
Pin, for 243645
Thread Unwinder Spool Rest (for one spool) (flat) with 201018C, 201528X, 228692 and 228693. for 225260 Thread Unwinder (for one spool) com
plete, Nos .150203,201696X,225259.
225324,225326,225388, 225391.
259658 and three wood screws 7/8
in. ,No. 12
Thread Unwinder Thread Guide Rod Washer, for 225324
Thread Unwinder Thread Guide Rod with 208AL and 225322, for 225260
No.
225326
' 225388
225391
225498 228364 228367
228388
228474 228476 228561
228692 228693
228719 15611 228721
228721 228722
228723 15612
228724 15612
228725 228726 Z28727
NUMERICAL LIST OP PARTS 21
Plate Name
15613 Thread Unwinder Thread Guide Position Cup, for 225260
15613 Thread Unwinder Spool Rest Rod, for 225260
15613 Thread Unwinder Thread Guide, for 225260
15611 Screw Driver (7-1/4 in. long)
15612 Knee Lifter Rock Lever Knee Plate with 350231C,for 228730
15612 Knee Lifter Rock Lever Stop Stud, for
228730
15612 Knee Lifter Rock Lever Knee Plate Arm, for 228730
15615 Foot Lifter Treadle Chain, 34 in. long,
with two 202784 15611 Screw Driver
15612 Knee Lifter Chain, 11 in. long, with two 202784, for 228730
15613 Thread Unwinder Spool Pin, for 225259 15613 " " •' " Washer, for
225259
Drip Pan with four each 228721 and wood screws 1-1/4 in. ,No. 8,R.H. B.
15608 Hold Down Screw Bushing 15611 Machine Cushion, for 228719
15612 Knee Lifter Rock Lever with 200380C and 350231C,for 228724
Knee Lifter Rock Lever Bracket with
200347AL and three wood screws 7/8
in.,No. 12, for 228724Knee Lifter Rock Lever Bracket 228723 with 228722 and 228725 to 228729, for 228730
.228725 to 228729, for 228724 Knee Lifter Rock Lever Hinge Pin
•' " " " Lifting Arm
It II II II II n
Crank with 350231C
Knee Lifter Rock Lever Lifting Arm
Crank Connection
15612 Knee Lifter Rock Lever Position Spring 15612 Knee Lifter Rock Lever complete, Nos.
228364,228367,228388.228561, 228724 and Form A1360 15608 Cloth Plate
15608 " Plate 15608 " " Gasket
Nos 15612 15612 15612
228728 15612
228729 228730
243601P 243601X 243602
22 NUMERICAL LIST OF PARTS
No. Plate Name
2436021? 15603
Machine Pulley (aluminum alloy casting)
for 3/8 in."V" belt (outside diam.of belt groove 2,6 in.) (rim diam.3-3/16 in.) with 200379C,£or
243731
243605P 15603 Machine Pulley (aluminum alloy casting) for 5/16 in. round belt (diam.of belt groove 1-13/32 in.) (rim diam.
3-3/16 in.) with two 200379C,for
243732
243606 15603 Machine Pulley Ball Bearing, for 243731
and 243732
243606 15602 Needle Bar Driving Crank Ball Bearing, for 243683
243607 15603 Machine Pulley Shaft, for 243608 243608 15603 " " " 243607 with 243609 243609 15603 " " " Ball Bearing, for
243608
243609 15602 Needle Bar Driving Shaft Ball Bearing, for 243684
243611 15603 Machine Pulley Shaft Sleeve, for 243612
243612 15603 1. 11 M ti 243611
with 243613
243613 15603 Machine Pulley Shaft Sleeve Oil Seal, for 243612
243614P 15606 Face Plate
243615 15605 Feed Bar with 200394C and 243634 243616 15605 " " Carrier with 243618 and two
243620
243617 15605 Feed Bar Carrier Hinge Stud
243618 15605 " " " " " Bearing, for 243616
243619 15605 Feed Bar Hinge Stud
243620 15605 " " " " Bearing, for 243616
243621 15605 " " Slide Block
243622 15614 " Dog, for 243713, for Umbrella Seaming
243623 15614 Feed Dog, for 243714, for Flat Work
243624 15609 " " " Umbrella Seaming and Necktie Work, for 243715
243625 15614 Feed Dog, for 243716, for Lined Neckties
243631 15605 " " Adjusting Plate
243632 15605 " Driving Connection Link with 243633
243633 15605 Feed Driving Connection Link Bearing,
for 243632
243634 15605 Feed Driving Connection Link Hinge Stud, for 243615
i.?lii36ae 15605 Feed Driving Link with 243636
243636 15605 " " " Bearing, for 243635
243637 15605 " Regulating Connection
NUMERICAL LIST OF PARTS 23
No.
243638
243639 243640 243641 243642
P l a t e 15605
15605 15605 15605 15605
243643 15605
243644 15605
*243645
243646 243647 243648 243649 243650 243652 243653 243654 243655 243655 243656 243657
243.4^
243659 243660
243661
243662
243664 243665 243666 243667 243668 243669
243670 243671
243673 243674
15602 15602 15603 15608 15608 15603 15603 15601 15601 15601 15601 15601
15602
15602
15602
15602
15602
15601 15608 15608 15608 15601 15601
15602 15602
15601 15614
Name
Feed Regulating Connection Hinge Pin, for 243643
Feed Regulating Crank
" " " Bushing
" " " Link with 243642
" " " " Bearing, for 243641
Feed Regulating Wheel (indexed) with
243638
Feed Regulating Wheel Lock Screw
L e v e r
Frame with 243665, 244026 and three 222119X
Frame End Cover, for 243745
" " " Gasket
Looper,for 243736 and 243737
" Safety Guard
ti II II Post
•< Shaft Bearing (back)
II II 11 (front)
Needle Bar with 9611 and 200141F
" " Bushing Presser Bar Bushing Needle Bar Connecting Link
" " " Stud with 200086C and 206758
Needle Bar Driving Connection with 243659 and 243660
Needle Bar Driving Connection Bushing (lower) for 243658
Needle Bar Driving Connection Bushing (upper)for 2i^658
Needle Bar Driving Crank with 200058D,
for 243683
Needle Bar Driving Shaft with 243740, for 243684
Needle Bar Oiling Felt Oil Level Indicator, for 243645
" Reservoir Cover
II " Gasket
Presser Bar with 2001 lOD 'I " Lifting Bracket with 201052C
Presser Bar Lifting Rock Shaft
II II II II II Crank
with 200141F Presser Bar Lifter
'I Foot, for Umbrella Seaming, Lined Neckties and Flat Work
2k NUMERICAL LIST OF PARTS
No.
243675
243681 243682 243683
Plate 15609
15605 15603 15602
243684 15602 243685
243686 243687
15604 15610 15610
243696 15606 243697
243698
243700 243701 243702 243703 243704 243705 243706 243707 243708 243709 243710 243711 243712
15606 15607
Nos
15607 15607 15607 15606 15606 15606 15606 15606 15606 15606 15608 15606 15606
243713 15614 243714
243715 243716
15614 15609 15614
243717 15606
243720 243731
15608 15603
243732 15603
Name
Presser Foot, for Umbrella Seaming and Necktie Work, for Machines Nos, 240wl and 240w2
Feed Bar Hinge Stud Collar with 200141F Looper Washer, for 243736
Needle Bar Driving Crank 243661 with 243606
Needle Bar Driving Shaft 243662 with 243609
Looper Thread Cutter, for 243737 Presser Foot Spring Guide, for 243687
" " with 200138X and 243686, for stitching labels, for Machine No.
240w4
Tension complete,Nos. 1560C, 13710, 350557C and two 2102
Tension Thread Guide
Thread Measuring Adjusting Knob (indexed) for Machines Nos, 240w2
and 240w4
243700 to 243702, for Machines Nos.
240w2 and 240w4
Thread Measuring Adjusting Knob Spring
" Pull-off Finger
" Thread Guide Nipper Rod
" " Bushing
" " Cap
" " Operating Sleeve
" " '• " Plug
" " Spring
" Thread Guide
Looper Safety Guard CompressionSpring Thread Retainer Stud, for 243712
Thread Retainer Bracket complete, Nos.
210683,210958,210992,210993 and 243711
Throat Plate, for 243622, for Umbrella Sezuning
Throat Plate, for 243623, for Flat Work
" " " 243624
243625. for Lined
Neckties
Thread Nipper complete, Nos, 1623C, 19445,50952J,129052 to 129054 and two 129158
Cloth Plate (stainless steel)
Machine Pulley 243604P with 243606 and 243738
Machine Pulley 243605P with 243606
and 243738
NUMERICAL LIST OF PARTS 25
No. Plate Name
243736 15603 Looper 243648 with 1368E and 243682,
for Machines Nos.240wl and 240w2
243737 15604 Looper 243648 with 1368E and 243685, for Machine No. 240w4
243738 15603 Machine Pulley Gasket, for 243731 and
243732
243740 15602 Needle Bar Driving Shaft Oiling Wick, for 243662
243741 15603 Looper Shaft End Thrust Bushing 243742 15603 " " " " AdjustingCol-
lar with two 200392C 243743 15605 Feed Lubricating Wick
243744 15602 Frame End Cover Oil Stop Screw Gasket (vellumoid) for 243745 243745 15602 Frame End Cover 243646 with 243744
and 350366X
243746 15603 Looper Shaft with 350558X and 350559X 243747 15602 Presser Bar Lifting Rock Shaft Crank
Spring
244026 15601 Presser Bar Lifting Rock Shaft Stop Pin, for 243645
259658 15613 Thread Unwinder Spool Stand with 200383C,for 225260
350231C 15612 Knee Lifter Rock Lever Knee Plate Arm Set Screw, for 228722
350231C 15612 Knee Lifter Rock Lever Knee Plate Set Screw, for 228364
350231C 15612 Knee Lifter Rock Lever Lifting Arm Crank Set Screw, for 228727 350366X 15602 Frame End Cover Oil Stop Screw, for
243745
350366X 15601 Frame Oil Stop Screw
350419X 15603 Machine Pulley Adjusting Screw 350555C 15605 Feed Regulating Wheel Lock Screw 350557C 15606 Tension Stud, for 243696
350558X 15603 Looper Set Screw (long) for 243746 350559X 15603 " " " (short) for 243746
350568X 15608 Hold Down Screw
701348 15616 Foot Lifter Treadle Extension Swivel Stud Nut Lock Washer, for 152169
2kn5k
350366X 21i3655
201052C
2li!i026
206758 200086C
2it365S 2ti3673
200110D 2ii366'i
243671-
243670 200141F
202510 24371*7
243683
200058D '
243661 243606
200136C
243684
243662 243609-
243740
243658 24366
243659
243745
243646 350366X
243744
200099X
200099X
243647
243736
2436t*8 2t*3682
1368E
21*3738
243731-3/g"
2lt360tiP 2li3606
350558X 21*3653 200392C r2«*37'*l
350559X
2l*37'*6 2i*37l*2
200379C
243732-5/16"
21i3605P 21*3738
21*3606
243608
21*3609' 21*3607
2D0379C
21*3613 I 243612
21*361 ij 350l*19X
(i
yuV^-
T
^:^37
2ti36liB .2143685
1368E
•350558X 21*3653 200392C y2l*37l*l
2«*3738
243731-3/8*'
21*360«*P 21*3606
^'*•'03^
21*371*6 21*371*2 \
21*3652
200379C
243732-5/jg"
21*3605P 21*3738
21*3606
243608
21*3609'
/2k%b07\ 11*3613 I 243612
200379C
\ \ \5l*361l|
3S01*19X,200958X
Ui C>
O 4=-
N)
«n:2-co-a"C4
15605-3/8
(>4
O-J-o
in/«o1^in'Cfl
o
x9
in«nN/ca'
2U36lJiP
200166X
200137X
243712
210993 2ii3711
lHjl—
210992 210958
200166X
210683 200397X
243696
1560C
13710
2102
.350557C
243717
50952J ' 129158 129052
^I623C 2143709
^1290514
19445 129053
2143705^1
2437014^
2143703-^
2143708-4
243706 2143707
2i436l4P
200166X
200137X
200166X
243712
210993 2kZ7n
210992 210958 210683
200397X
243696
1560C
13710
2102
r
350557C
2002iilC
2»i3700
21i3698
2U3702
222il9X
243709
243717
^0952J "
129158 129052
1623C
^129054
^19^45
®^129053 243705^J
243704-^
243703-^
sg
243708-1
243706-^
21i3650 2ii3710
691X
21*3650
21*3602
222119X
p 21*3601P
8 I 21*3601X
21*3720 W'
35056ax
200061*X 21*3666
20006l*X 21*3667
20006l*X
228721
21*3665
243675 243624
243715
)76D 244X
16=1
51224B
244X
21*3687 21*3621*
zii.
2l*l*X
21*3715
20013BX / J J
ImJ 21*3686
1
16=1
I
"n 5 176D
•
• m
•
o 1
Qy
15611-3/8
228730
228724
228729 ]
228723
\
\
\ t
^r228725
\ ^2003li7AL
Ls.
228728
228726 228727
228722
228693
V
201528X
225260
225391 /201696X
228692
225326 225322
'22532i»
208AL
225259
201018C 150203
225388
1200383C
/
MS)
- <3
9
15614-3/4
t - nO
% <=•
^ ^ V . -Zi
^ \ ^r"
\ \ i
^ \
NX
fj-
NWg™ l%ZJ
N
jr*
1-4
iC*'.
It
1«4372
14373
2718 505B1R
46709
5107ltR 14375
23250
17881
%
14379
46709 51074R
23250
67425
202784
228474-34" 202784
152170
172171
5I089R #
51581R
' ♦
♦ # ♦
152080 ^ .
5i723X
152095
202781*
228li7>*-3l*" 202781*
70131*8
,152169
51581R 51089R
152153 152080
153»tX
120lt5ii-3/32' 1201*55-1/8"
0
26029
26361 153l*X
36825
228K
36823
36822
36821*
Ui O
14376
1437 14373
2718R 50581R
4375
17881
14374
202784 228474
202784