SINGER

Form 18932

(1035)

Printed in U.S.A.

LIST

OF

PARTS

20CH\^

SINGER

MACHINE No. 96-41

THE SINGER MANUFACTURING COMPANY

INSTRUCTIONS FOR OILIN6

To ensure eosy running and prevent unnecessary wear of the ports which are in movable contact, the machine requires oiling and when in continuous use, "TYPE B" or "TYPE D" OIL, sold by Singer Sewing Machine Company, should be applied at least twice each day to all oil holes marked

"OIL", as instructed in Form 8939.

"TYPE D" OIL should be used when on oil is desired

which will produce a minimum of stain on fabrics, even after a long period of storage.

CAUTION: These machines are equipped with a lubricat ing system, designed to use oil instead of grease in the hook

driving gears.

Copyright, U. S. A., 1921, 1933, 1934 and 1935 by The Singer Manufacturing Company

All Rights Reserved for all Countries

INDEX

Page

Accessories 15

Bobbin Winders 15

Finger Guards 18

Foot Lifter Parts 18

Knee Lifter Parts i30

Ifachlne Base 15

ICachine No. 96-41 5

Numerical List of Parts 23

C^bsolete Parts 21

Thread Unwinder 21

INSTRUCTIONS FOR ORDERINO

In ordering from this list, use ONLY the part NUUBER In

the FIRST column.

The number stamped on a Senlng Uachlne Part Is In every case the number of the single part only.

Every combination of parts sent out as such has Its spe cific number, which, although not stamped on the parts, must be used when ordering the combination.

Each number always Indicates the SAUE PART In whatever list It appears, or for whatever machine.

The letters after some of the numbers Indicate the style of finish only, as follows:

A-Hardened, Polished, Nickel Plated and Buffed B-Pollshed, Nickel Plated and Buffed

C-Hardened Only D-Pollshed Only E-Soft, Not Polished F-Hardened and -Polished H-Blued

J-Nlckel Plated Only K-Hardened and Nickel Plated L-Brass Plated

U-Oxldlzed N-Japanned, Dull P-Japanned, Bright R-Merllzed T-Copper Plated

T.A-Hardened, Polished, Copper and Nickel Plated and Buffed T.B-Copper and Nickel Plated and Polished

T.J-Copper and Nickel Plated Only T.K-Hardened, Copper and Nickel Plated T.M-Copper Plated and Oxidized T.L-Copper and Brass Plated

U-Zlnc Plated V-Sllver Plated

W-Pollshed and Nickel Plated Y-Black Nickel Plated Only Z-Chromlum Plated

Z.B-Pollshed, Nickel Plated, Buffed and Chromium Plated Z.J-Nlckel and Chromium Plated

These letters MUST BE USED when they appear in the list;

and AFTER the number as In the l i s t . In this series:

1 to 1500, 50001 to 51500 and 140001 to 142000 are Screw Numbers

1501 to 1800 and 51501 to 51800 are Nut Numbers 1801 to 2000 and 51801 to 52000 are Roller Num bers

2001 to 50000 and 52001 to 140001 and 142000 to 190000 are Sewing Uachlne Parts, 190001 and upward are numbers of Electrical Parts

The figures In the second column refer only to tho plates. Illustrating the parts, and are NOT TO BE USED in ordering.

Parts marked with an asterisk (•) are furnished only when repairs are made at factory.

LIST OF PARTS COMPLETE FOR

• -r-i® -

MACHINE NO. 96-41

FC« CLOAKS, CLOTHING. OVERALLS AND OTHER WORK IN CLOTH. HAS REVERSIBIE FEED MECHANISM. THE MACHINE IS FITTED WITH HEAVY GEAR SHAFTS. THE GEARS ARE LUBRICATED WITH OIL INSTEAD OF GREASE. SPEED UP TO 3500, ACCORDING TO TOE MATERIAL BEING STITCHED.

No. Plate Name

•127214 - - — Arm with 15404 and two each 15405 and 56015

Note: Due to the accuracy required for gear align ment, Arm cannot be supplied separately and can only be sent out as a unit. Arm and Bed assem bled.

16532 21001 Arm Dowel Pin

52183 21801 " Oil Tube with 52184, for oiling 52024.

52180 21801 ' " " (long) with 52104, for oiling 52022

52185 21801 Arm Oil Tube (short) with 42367,for oiling

52022

52182 21801 Arm Oil Tube with 52184, for oiling 24040.

52186 21801 " " - n 52104, for oiling 127156

for 127193

127187 21801 Arm Oil Tube (bent) with 42367, for oiling

127152, for 127193

No. Plate 52148 21801 52149

56015 21801 52150 21801

42367 21801

52184 7736

116E 7725 854E 7725 127047 7733 52191 7739 52192

52193 7725

52194 7725

448C 7725

52195 7739

52196

52193 7725

52198 7725

435C 7725

68350 21801

127072 21827

127070 21811

121E 21827

1036C 21809

144D 21827 127058 7739 52492 21804 432C 21809

52493 21804

PARTS TOR machine: 96-41

Name Arm Oil Tube for 52149

" " 52148 with 52150, for ollli.g

127073 and 127074

Arm Oil Tube for oiling 127058

" " " Packing (braided cotton) for

52149

Arm Oil Tube Packing (braided cotton) for

52185 and 127187

Arm Oil Tube Packing (wick) for 52180, 52182,52183 and 52186

Arm Screw (back)

" (front)

^ Shaft (horizontal)

" " " Flanged Bushing (back)

II n M II n N

52191 with 52193 and 52194

Arm Shaft (horizontal) Flanged Bushing (back) Oil Pad (Inside) braided cotton.

Arm Shaft (horizontal) Flanged Bushing (back) Oil Pad (outside) felt

Arm Shaft (horizontal) Flanged Bushing (back) Set Screw

Arm Shaft (horizontal) Flanged Bushing (front)

Arm Shaft (horizontal) Flanged Bushing (front) 52195 with 52193 and 52198 Arm Shaft (horizontal) Flanged Bushing

(front) Oil Pad (Inside) braided cotton Arm Shaft (horizontal) Flanged Bushing

(front) Oil Pad (outside) felt

Arm Shaft (horizontal) Flanged BuShlng (front) Set Screw..

Arm Shaft (horizontal) Front Bearing Oil Cup

Arm Shaft (horizontal) Bevel Gear with two 1036C

Arm Shaft (horizontal) Bevel Gear Case (two pieces) with 121E

Arm Shaft (horizontal) Bevel Gear Case

Screw ;

Arm Shaft (horizontal) Bevel Oesu? Set Screw

Arm Shaft (horizontal) Screw

" " (uprl^t)

Bushing (lower)

" " • " " Set Screw

Arm Shaft (upright) Bushing (upper)

PARTS FOR IIAOIINE 96-41 7

Mo. Plate Name

4350 7725 Arm Shaft (.upright) Bushing (upper) Set

Screw

127073 21827 Arm Shaft (upright) Bevel Gear (lower)

with two 1259C

1259C 21S09 Arm Shaft (upright) Bevel Gear (lower) Set

Screw

127074 21827 Arm Shaft (upright) Bevel Gear (upper)

with two 12590

12590 21809 Arm Shaft (upright) Bevel Gear (upper) Set

Screw 127146 21806 Am Side Oap

219J 7725 " " " Screw 127079 21811 " " Oover

60053J 21827 " " " Thumb Screw 12403 7725 " Spool Pin and Thread Eyelet

8879 5936 " " " Washer (cloth) 127192 7739 " Top Oover

127193 7739 " " " 127192 with 12403,52188 and

127187

158J 21827 Am Top Oover Screw

52187 21811 Balance Wheel (power, disc) 2 3/16 In.

pulley, with two 4480 52063 21811 Balance Wheel Oil Oover

210J 7725 " " " " ggj.0, 4480 7725 " " Set Screw

•52383 Bed

Note: Due to the accuracy required for gear align ment, Bed cannot be supplied separately and can only be sent out as a unit. Arm and Bed assem bled.

12431 Bed Slide

4307 7739 " " Spring 725E 21827 " " " Screw

12432 21806 Bed Slide complete, Nos. 4307,12431 and two 725E

52051 Pace Plate

176J 21809 " •* Screw

52053 7725 " " Thread Guard (lower) 226J 21809 • » " » " "

52170 7725 " " » « (upper)

226J 21809 « - « - - ggj.g^

52052 21811 Face Plate complete, Nos. 52051,52053, 52170 and two 226J,

60190J 21827 Face Plate Thumb Screw 52452 7739 Feed Bar

3130 21827 " " Screw Oenter

56813 » « n »

1519J 21809 " " " " Nut 52165 21827 " Oonnectlng Link

8 PARTS FOR UACHINS 96-41

No. Plato Name

375C 21027 Feed Connecting Link Hinge Screw

1518J 21827 - " n , ,

52073 21827 " " " Stud

500830 21827 " ° " " " Set Screw.

26603 Peed Dog, 20 teeth (16 teeth to the Inch)

for 20356 and 20357

28360 Feed Dog, 15 conical teeth (12 teeth to the Inch) for 20356 and 20357

121446 7738 Feed Dog, 13 spiked teeth (10 teeth to the Inch) for 20356 and 20357

Note: Feed Dog 121446 Is sent with this o^achlne un less another Feed Dog Is specified on order.

50117E 21827 Feed Dog Screw...

127202 7739 " and Feed Lifting Eccentric with 448C,

12990,52210 and 52211

52210 21827 Feed and Feed Lifting Eccentric Lubricat ing Pad (long) wood

52211 21827 Feed and Feed Lifting Eccentric Lubricat ing Pad (short) wood

4480 7725 Feed and Feed Lifting Eccentric Set Screw.

12990 21809 » " » « « Position

127152 7739 Feed and Feed Lifting Eccentric Sleeve....

52407 22201 " Forked Connection

52451 " " " 52407 with 3750,

1518E and 52165

3750 21827 Feed Forked Connection Hinge Screw

1518E 21827 " " » , „ Nut....

52384 7733 " Lifting Rock Shaft

52385 Feed Lifting Rock Shaft complete, Nos.

12376 and 52384

127156 22201 Feed Lifting Rock Shaft Connecting Rod

966E 21827 Feed Lifting Rock Shaft Connecting Rod Cap

Screw

3750 21827 Feed Lifting Rock Shaft Connecting Rod

1518J 21827 Feed Lifting Rock Shaft Connecting Rod

Hinge Screw Nut

12376 7739 Feed Lifting Rock Shaft Crank with 157J and 1813

157J 21827 Feed Lifting Rock Shaft Crank Clamping

Screw

1813 21827 Feed Lifting Rock Shaft Crank Roller and

501910 21827 Feed Lifting Rock Shaft Screw Center

52097 501910

with 1513J

1513J 21827 Feed Lifting Rock Shaft Screw Center Nut..

No. Plate 50338S 7735 56032 7735 50193J 7735 56033 7735 56034 7735 56035 7735 52408 7739

•52411

1128E 7725 52409 7739 50339D 7735 158E 21827

52410 7737

51846 7737 52386 7733 29633 7739 157J 21827 52387

50191C 21827 52097

1513J 21827 25866 22201 50190J 21827 127088 22201 127116

127188 7725 1133E 21809 52014 22201 1133E: 21809 52205 21804 52206

775E 21809 52207 7725

24041 21804 207E 2834 127201 22201

1065C 7725 52306 7725 229J 7725 52307 7725 51460F 7725

PARTS FOR UACHINE 96-41 9

Name Feed Regulating Stud

" " " Head with 56033

" " e n Screw

" " Stop Pin

" " " Lock Pin

" « " " Spring

" Regulator with 50083C

52408 with 52073

" " Hinge Screw

" Reverse Lever with 158E and 51846....

" " " Hinge Screw

Clamping Screw

Feed Reverse Lever Hinge Screw Friction Wa^er

Feed Reverse Lever Roller and Stud

" Rock Shaft

" " " Crank with 157J

" " " " Clamping Screw Feed Rock Shaft complete, Nos. 29633 and

52386

Feed Rock Shaft Screw Center

50191C with 1513J

Feed Rock Shaft Screw Center Nut Oulde

" Thumb Screw Needle Bar (hollow)

" 127080 with 229J,52306 and

52307

Needle Bar Buahlng (lower)

" " " Set Screw (upper)

" Set Screw

" " Connecting Link with 52207

" " 52206 with 24041

Needle Bar Connecting Link Cap Screw

" " Lubricating Pad (wood)

Needle Bar Connecting Stud with 207E

" Clamping Screw.

" Crank with 10360,10370 and

1065C

Needle Bar Crank Position Screw

" " Thread Guard

" " " " Screw

" Clamp with 51460F

" " Screw

10

No. Plate

•52201

52202 7732

•52203 ^{_ _ _ _ _} 127191 22201 127091 22201 127092 22201

52184 7736 12391 22202 52338 5936

453C 5936 52016 5936 689C 5936 1520J 5936 12327 5936

127108 22202 11170 5936 62527 21809 52426

52390

26231 7738 52427 7738

176J 21809 688J 7735 1986 7737

51324 7737

52456 7737 52460 7737 440F 7737 1547J 7737 2206 7737 316F 7737 1547J 7737 2205 7737 176D 21809 1549J 7737 388D 7737 652D 7737 1528D 7737 1550D 2834 52457 22202

PARTS FOR MACHINE 96-41

Name

Oil Absorbent Wick

" 52201 with 52203. for lower cavity in head of Arm

Oil Absorbent Wick Wire

" Tube with 52104

" " Bracket

127091 with 127191, for oiling Feed Connecting Link

Oil Tube Packing (wick) Presser Bar (hollow)

" " Guide Bracket with 223C and 453C

Presser Bar Guide Bracket Set Screw

" Lifter

" " " Hinge Screw

" Nut

" Lifting and Releasing Lever Bracket

Presser Bar Spring

" Washer Foot Hinge Pin

" " Plate

" Shank

" Spring

Presser Foot (spring hinged)complete, Nos.

26231,52390,52426 and 62527 Presser Foot Screw

Pressure Regulating Thumb Screw

Roller, 7/8 in. diam., 9/64 in. face, fine with 652D and 1528D, for 52461

Roller, 9/16 in. diam., 3/16 in. face, coarse, with 388D and 1550D, for 52457.

Roller Arm for 52457

" 52461

" Adjusting Screw

" Nut

" Bracket

" Screw Center

" Nut

" Lock Spring

" " " Screw

" Nut Sciew

Screw

" Nut

" Nut

Roller Presser complete, 9/16 in. coarse roller, Nos. 176D,44(F,1549J,2205,2206, 51824,52456, two 316F and three 1547J..

No. Plate 52461 22202

127095 127096

•127119

127097 21808

127098

40264 21808 52472

52481

40392 21808 125320 21808 2974 21808

2975 21808 592E 21808 40393

591F 21808

40394 1380E

52473

127099

127100

52018

704J

•52475

•52476

40274 1367D 1253C 127059 127004 127043

21808 21808

21808

21808

21808

21809

21808 21808 21809 7733 21804

PARTS FOR MACHINE 96-41 11

Name

Roller Presser complete, 7/8 In. fine roller, Nos. 176D,44QP,1549J,1986,2205, 2206,52460, two 316F and three 1547J...

Rotating Hook with three 1253C

127095 with 127102 and four 1053D

Rotating Hook 127096 with 40274,127100 and three 1367D

Rotating Hook 127096 with 40274 and three 1367D (For Agents Only)

Rotating Hook 127119 with 52473.

" Bobbin

" Case

" " " " 52472 with 591F, 1380E and 40394

Rotating Hook Bobbin Case Latch

" " " Lever

n w n rt H n Ful

cnun Pin

Rotating Hook Bobbin Case Lat(di Spring....

" " « 1. « ggj.0^

" " " " Hinge Nos. 2974,

40392 and 125320

Rotating Hook Bobbin Case Tension Regulat ing Screw

Rotating Hook Bobbin Case Tension Spring,.

11 11 n n N H

Screw

Rotating Hook Bobbin Case complete, Nos.

592E,2975,40393 and 52481

Rotating Hook Bobbin Case 52473 with 127100 (For Agents Only)

Rotating Hook Bobbin Case Holder with 52475 and two 52476

Rotating Hook Bobbin Case Holder Position Bracket

Rotating Hook Bobbin Case Holder Position Bracket Screw

Rotating Hook Bobbin Case Locating Plate..

n R n n n n

Rivet

Rotating Hook Section

" Screw

" " Set Screw

" Shaft

" " " Bushing (back)

" " M n B 127004

with 52045

12

No. Plate 52045 7736

1143C 21809

127005 21804 127044

54897 21809

52045 7736

1148C 21809

127073 21827

127007 21811

50234E 7737

121E 21827 1259C 21809 127102 21808 1053D 21809 52337 5936 223C 5936 2102 3471 1560C 21809 32572 7735 43944 5936 12398 5936 12329 5936 32574 7735 2103 7735 50304C 7735 52098

50305C 7725 52397

52027 7735 52454 21804 624C 21809 52215

52216 21804

522i7

1037C 21809 1036C 21809 52022 22201

PARTS FOR UACHINE 96-41

Name

Rotating Hook Shaft Bushing (back) Packing (wick)

Rotating Hook Shaft Bushing (back) Set Screw

Rotating Hook Shaft Bushing (front) 127005 with 52045

Rotating Hook Shaft Bushing (front) Oil Cup.

Rotating Hook Shaft Bushing (front) Pack ing (wick)

Rotating Hook Shaft Bushing (front) Set Screw

Rotating Hook Shaft Bevel Gear with two 1259C

Rotating Hook Shaft Bevel Gear Case (two pieces) with 121E and 50234E

Rotating Hook Shaft Bevel Gear Case Plug Screw

Rotating Hook Shaft Bevel Gear Case Screw.

Set Screw..

" Thread Guard...

Screw Slack Thread Regulator

Set Screw Tension Disc

" Regulating Thumb Nut

" Releasing Disc Lever

" Hinge Fin

" " " Spring

Pin

" Spring Stud

" " 50304C with 1560C

" " Set Screw

Tension complete, Nos.2103,32572,32574, 52083,52098,52394 and two 2102

Thread Guard (side of arm) Retainer

" Set Screw

Thread Take-up complete, Nos. 11204.52025 and 52217

Thread Take-up Crank

" " " 52216 with 775E and 52206

Thread Take-up Crank Position Screw

" " " Set Screw

" Lever with 52130

PiUlTS FOR UACHINE 96-41 13

No. Plate Name

52023 21809 Thread Take-up Lever Hinge Pin 52024 21804 " " " Link

11204 21804 « n n «

4350 7725 " " « n

Screw

52130 7725 Thread Take-up Lever Thread Eyelet Bushing 52025 Thread Take-up Lever complete, Nos. 52022

to 52024

52394 7735 Thread Take-up Spring

52083 7735 " " " Regulator with 50305C

4480 7725 « » » « Screw.

20356 7738 Throat Plate, large needle hole, for 26603 28360 and 121446

20357 Throat Plate, small needle hole, for 26603 28360 and 121446

Note: Throat Plate 20356 Is sent with t h i s machine unless another Throat Plate Is specified on or der.

691F 7738 Throat Plate Screw

44212 7734 Drip Pan with four 1 In. wire nails

•15404 Trade Mark 15405 " " Rivet

SINGER Needles should be used

in RINGER Machines

are marked with the

Company's Trade Mark "SIMAN CO.**

Needles in Containers marked

"FOR SINGER MACHINES"

are NOT SINGER made needles. 2

SINGER Needles should be used

in SINGER Machines

are marked with the

Company's Trade Mark "SIMANCO**" i

Needles in Containers marked

"FOR SINGER MACHINES"

are NOT SINGER made needles.

UACHINE BASE

Name Bed Frame Cushion (leather).

Screw Spring....

" " Hinge Connection..

ti n n n

and 19397

15

No. Plate 19219 7729 158C 21827 19220 7730 19226 7730

19398 19226 with 211E

19397 7729 Bed

211E 7729 ^"

16555 7730 ^"

14010 7729 ^"

20067 819 ⁿ

" Screw

" Plate

" " " Rivet

" with two each 16555,19398, four each 19219,19220, six each 14010, wood screws 1 1/4 in. No. 12 and eigdit 158C.

No.

12361 44139 44140

12405 41400 120342 120343 26026 26485 8909 8908

Plate 7730 7730

7729 22202 21835 21835 21835 21835 21835 21835

ACCESSORIES

Name Uachine Hinge Connection

" Plate

Uachine Hinge complete, Nos. 12361,44139 and merlized wood screw 1 1/4 in. No.14 Uachine Rest Felt

" " Pin (wood)

Oiler (copper plated) with 120343

" Spout, 3 1/2 in. long Screw Driver (large)

(small) Wrench for 1513 and 1518

" 1519 and 1520

BOBBIN WINDERS

BOBBIN WINDER

(SWINOINO AUTOUATIC, LEFT HAND)

No. Plate Name

41913 21834 Braclcet with 457C 41583 21834 Frame with 4S7C

34105 21834 " Hinge Pin

16 BOBBIN WINDER

No. Plate Name

457C 7729 Frame Hinge Pin Set Screw 41914 21834 " Spring

41585 21834 Pulley with 171D 171D 7729 " Set Screw 41586 21834 Spindle

41587 21834 Stop Utch

42614 21834 " " Hinge Stud

457C 7729 " " " " Set Screw 7958 7729 " " Stop Pin

41588 21834 " " Tripping Arm with 185H 185H 7729 " « » " Clamping Screw

150459 21834 Tension Bracket with 4600

150460 Tension Bracket complete, Nos. 12403,41593 to 41595,52186,127187,150459 and two 2455

158J 21827 Tension Bracket Screw

12403 7725 " " Spool Pin and Thread Eye

let

8879 5936 Tension Bracket Spool Pin Washer (cloth)..

2455 2834 " Disc 41593 5936 " Spring 41594 5936 " Stud

4600 7729 " " Set Screw 41595 5936 " Thread Guide

60845 Bobbin Winder, Nos. 7958,34105,41583,41585 to 41588,41913,41914 and 42614

41915 21834 Bobbin Winder 60845 with 880E and 25446...

150461 Bobbin Winder (swinging automatic, left hand) complete, Nos. 41915 and 150460..

880E 7729 Bobbin Winder Screw 25446 7729 " " " WaSher

BOBBIN WINDER

(SWINGING AUTOMATIC, RIGHT HAND)

No. Plate Name

41339 2833 Base

41340 2833 Frame

1429D 2834 " Hinge Screw

41341 2833 " Spring

207D 2834 " " Screw..

41342 2833 Pulley with 200F

200F 2834 " Set Screw

41343 2834 Spindle 27306 2834 Spool Pin

27307 2833 Stand

No. Plate 27300 2833

11241 2833 41344 2834 41345 2834 152F 2834 1430D 2834 1550H 2834 41346 2834 1430D 2834 2455 2834 1562J 2834 418E 2834 10141 2834 2106 2834 60456

41347 2833

41348

9331 2834

BOBBIN WINDER 17

Name

Spool Stand complete, Nos. 4ieE,1562J,2106 10141,11241,27306,27307 and two each 2455 and wood screws 1 In. No. 10

Spool Washer (cloth) Stop Latch

" Finger

Screw

" " Hinge Screw

" Nut

" Lever

" " " Hinge Screw Tension Disc

" " Regulating Thumb Nut

" " Screw Stud

" Spring

" Thread Guide

Bobbin Winder, Nos. 152F,207D,1429D.155CH, 41339 to 41346 and three 1430D

Bobbin Winder, Nos. 60456 and two each 9331 and wood screws 1 in. No. 10 R.H.B.

Bobbin Winder (swinging automatic, right hand) complete, Nos. 27308 and 41347...

Bobbin Winder Washer

BOBBIN WINDER

(SWINGING AUTOMATIC, RIGHT HAND) FOR POWEE TABLE

No. Plate Name

225433 22205 Bobbin Winder and Tension Bracket Base..., 225453 22204 Frame with 202277 and 225438

225454 3471 ^" Hinge Pin

202277 3471 ^tt Oil Packing (wick)

225438 3471 Well Cap

225455 3471 ^II Spring

225456 3471 " Plunger

202473 22204 Pulley with 200380C 200380C 3471 ^" Set Screw 225381 22204 Spindle

225444 3471 Stop Latch.

200056E 3471 ⁿ " Screw

225458 3471 ^N " Thumb Lever

225459 3471 " " " Hinge Stud

225459 3471 ^" " Joint Stud

202478 3471 ⁿ Trip Lever

200299H 3471 ⁿ " " " Hinge Screw

18

No. Plate 225461 3471 200082D 3471 228026

2102 3471 202407 3471 201499B 3471 201572B 3471 225462

225382 22205

No.

36818 36819 36820 196J 50316J 36821

120496 120497 50302J

236J 120498

120857 120858 50302J

236J 120860

Plate 22202 7736 22202 7736 7736 22202

22202 22202 7736 7736 22202

22202 22202 7736 7736 22202

BOBBIN WINDER

Name Tension Bracket with 201499B

" " Screw

" Washer

" Disc

" Spring

Stud

" " Thumb Nut

Tension Bracket complete, Nos. 201572B, 202407,225461 and two 2102

Bobbin Winder complete, Nos.200056E, 200082D, 200299H, 202473,202478,225381, 225433,225444,225453 to 225456,225458, 225462,228026, two each 225459 and wood screws 3/4 in. No. 12 R.H.B

FINQESl QUARDS

Finger

Finger and Finger

Finger and Finger

Finger and

Name Ouard

" Friction Washer

" Holder with 196J

" " Screw

" Set Screw

Ouard complete, Nos. 36818 to 36820 50316J

Guard

" Holder with 50302J

" " Screw

" Set Screw

Guard complete, Nos. 236J, 120496 120497

Guard

" Holder with 50302J

" " Screw

" Set Screw

Guard complete, Nos. 120857, 120858 two 236J

No.

5596 56848

FOOT LIFTER PARTS

Plate Name

7732 Bell Crank

5596 with 5599 and 5601.

FOOT LIFTER PARTS 19

No. Plate Name

5599 7732 Bell Crank Bracket 178E 7729 " " " Screw 5601 7729 " " Hinge Pin 5735 7730 " " Spring

5598 7732 Bell Crank complete, Nos. 5735 and 56848., 5670 Chain, length 26 In. to 35 In., with 56864

and 56865

Note: When ordering No. 5670, state length required 56864 7730 Chain Hook (large)

56865 7730 " " (small) 4879 7730 " Connecting Link 12237 22203 Lifting Lever with 448C 52028 22203 " " Connecting Rod

12416 5936 « » » «

76D 7729 . » » « « Hinge

Screw

1521E 7729 Lifting Lever Connecting Rod Lock Nut 802D 7729 " " Hinge Screw

12241 5936 " Link

766D 7729 " " " Hinge Screw 12240 5936. " " Pin

448C 7725 " " "Set Screw 2763 819 Rock Shaft

12242 819 • " Hanger with two wood screws 1

In. No. 10

6337 819 Rock Shaft Lifting Bracket with two 356C..

12243 819 " " " " Hook 7125 819 " " " " Hook

356C 7729 " » " " " Set Screw.

356C 7729 « " » .. gg^

2770 22205 " " Stop Dog with 356C 356C 7729 " " " "Set Screw

4880 819 Rock Shaft complete, Nos. 2763,2770, 7125

12243 and two each 6337 and 12242 4881 819 Treadle

4882 22202 " Shaft 4883 22202 " Spring 4884 819 " Stand

4885 819 Treadle complete, Nos. 4879,4881 to 4884 and two wood screws 1 In. No. 16 52319 Foot Lifter complete, Nos. 76D,766D,802D,

1521E, 4880,4885,5598,5670,12237,12240.

12241,12416,52028 and two 178E...,

20

KNEE LIFTER PARTS

No. Plate Name

5596 773S Bell Crank

56848 " " 5596 with 5599 and 5601 5599 7732 " " Bracket

178E 7729 " " " Screw 5601 7729 " " Hinge Pin 5735 7730 " " Spring

5598 7732 Bell Crank complete, Nos. 5735 and 56848..

12237 22203 Lifting Lever with 448C 52028 22203 " " Connecting Rod 12416 5936 " " " "Joint

76D 7729 " n « » » Hinge

Screw

1521E 7729 Lifting Lever Connecting Rod Lock Nut 802D 7729 " " Hinge Screw

12241 5936 " " Link

766D 7729 n n i. jjjugg Screw

12240 5936 " " Pin

448C 7725 " " "Set Screw 2763 819 Rock Shaft

7539 22205 " " Hanger with two wood screws 1 In. No. 10

2765 22205 Rock Shaft Knee Arm

2766 22205 " " " "Hub with 356C 356C 7729 " " " " " Set Screw

2768 Rock Shaft Knee Arm complete, Nos. 2765 to 2767

2767 22205 Rock Shaft Knee Plate with 356C...

356C 7729 " « - " S e t Screw

6337 819 " " Lifting Bracket with two 356C..

2778 22205 - » » »

356C 7729 " " " " " Set Screw.

3560 7729 - n « " S e t Screw

2770 22205 " " Stop Dog with 356C 3S6C 7729 • - " " Set Screw

12250 22205 Rock Shaft complete, Nos. 2763,2768,2778,

52320 Iftiee Lifter complete (power table) No8.76D 766D, 802D, 1521E, 5598,12237,12240,12241, 12250,12416,52028 and two 178E

21

THREAD UNWINDER

FOR TWO SPOOLS OR TWO LARGE CONES OF THREAD

No. Plate Name

225257 20335 Spool Rest with 201018C 150203 20335 " " Cushion (felt) 225388 20335 " " Rod

200383C 7729 ' " "Set Screw 201018C 7729 " " Set Screw 202490 20335 " Stand with 200383C 225391 20336 Thread Guide

201696J 7729 " " Lock Nut 225326 20335 " " Position Cup

225324 20335 " " Rod with 208E and 225322 208E 7729 " " " Screw

225322 7729 « » « « WaSher

225258 20335 Thread Unwinder complete, Nos. 201696J, 202490,225257,225324,225326,225388, two each 150203,225391 and three wood screws 7/8 In. No. 12

27739 22204 Thread Cone (wood) for large cones 225390 22204 " " Holder for Inverted cones

Note; Nos. 27739 and 225390 are used with, but not

Included In 225258.

OBSOLETE PARTS

No. Plate Name

L27080 22203 Arm Top Cover for 52175

52175 22203

" " " 127080 with 12403,52186 and

24040 7736 Needle Bar Connecting Link with 794E for 24894

24894 Needle Bar Connecting Link 24040 with 24041, for 52143

794E 7735 Needle Bar Connecting Link Adjusting Screw for 24040

24052 22203 Needle Bar Crank with 1036C,1037C and 1065C, for 96-41 Machine

52436 22203 Needle Bar Crank with 1036C,1037C and 1065C,for 96-44 Machine

52054

Thread Take-up complete for 96-41 Machine,

52021 7736 Thread Take-up Crank for 52143

22 OBSOLETE PARTS

No. Plate Name

52143 Thread Take-up Crank 52021 with 775E and 24894. for 52054

150371 22203 Bobbin Under Tension Bracket with 460G,

for 150374

150374 Bobbin Winder Tension Bracket complete.

NOS. 12403.41593 to 41595.52186.127187.

150871 and two 2455. for 150375

150375 Bobbin Winder (swinging automatic, left hand) complete. Nos. 41915 and 150374.*

SINGER Needles should be used

in SINGER Machines

are marked with the

Company's Trade Mark "SIMAN CO.**

Needles in Containers marked

"FOR SINGER MACHINES"

are NOT SINGER made needles. 2

23

NUMEailCAL. LIST OF PARTS

No. Plate 76D 7729

116E 7725 121E 21827

121E 21827

144D 21827 152F 2834

157J 21827

157J 21827

158J 21827 158C 21827 158J 21827 ISSE 21827

171D- 7729 176J 21809 176J 21809 176D 21809

178E 7729

185H 7729

196J 7736 200F 2834 207D 2834 207E 2834

208E 7729

210J 7725 211E 7729

219J 7725 223C 5936 226J 21809

226J 21809

Name

Lifting Lever Connecting Rod Joint Hinge Scren for 52319 and 52320

Arm Screw (back)

" Shaft (horizontal) Bevel Gear Case Screw for 127070

Rotating Hook Shaft Bevel Qear Case Screw for 127007

Arm Shaft (horizontal) Screw

Bobbin Winder Stop Latch Finger Screw for 60456

Feed Lifting Rock Shaft Crank Clamping Screw for 12376 and 52434

Feed Rock Shaft Crank Clamping Screw for

29633

Arm Top Cover Screw

Bed Frame Cushion Screw for 20067 Bobbin Winder Tension Bracket Screw Feed Reverse Lever Hinge Screw Clamping

Screw for 52409

Bobbin Winder Pulley Set Screw for 41585..

Face Plate Screw Presser Foot Screw

Roller Arm Lock Spring Screw for 52457 and 52461

Bell Crank Bracket Screw for 52319 and 52320

Bobbin Winder Stop Latch Tripping Arm Clamping Screw for 41588

Finger Guard Holder Screw for 36820 Bobbin Winder Pulley Set Screw for 41342..

" " Frame Spring Screw for 60456 Needle Bar Connecting Stud Clamping Screw

for 24041

Thread Unwinder Thread Guide Rod Screw for 225324

Balance Wheel Oil Cover Screw

Bed Frame Hinge Connection Cap Screw for 19398

Arm Side Cap Screw

Slack Thread Regulator Set Screw for 52338 Face Plate Thread Guard (lower) Screw for

52052

Face Plate Thread Guard (upper) Screw for 52052

Zi NUMERICAL LIST OF FARTS

No. Plate Name

229J 7725 Needle Bar Thread Guard Screw for 127116..

236J 7736 Finger Guard Set Screw for 120498 and 120860

3130 21827 Feed Bar Screw Center for 56813

316F 7737 Roller Arm Bracket Screw Center for 52457 and 52461

356C 7729 Rock Shaft I&iee Arm Hub Set Screw for 2766 356C 7729 " " " Plate Set Screw for 2767..

3560 7729 " " Lifting Bracket Hook Set Screw

for 6337

3560 7729 Rock Shaft Lifting Bracket Set Screw for 6337

3560 7729 Rock Shaft Stop Dog Set Screw for 2770....

3750 21^7 Feed Connecting Link Hinge Screw

3750 21827 " Forked Connection Hinge Screw for

52451

3750 21827 Feed Lifting Rock Shaft Connecting Rod Hinge Screw

388D 7737 Roller Screw for 51824

418E 2834 Bobbin Winder Tension Disc Screw Stud for 27308

4320 21809 Arm Shaft (upright) Bushing (lower) Set

Screw

4350 7725 Arm Shaft (horizontal) Flanged Bushing

4350 7725 Arm Shaft (upright) Bushing (upper) Set Screw

4350 7725 Thread Take-up Lever Link Hinge Pin Set Screw

440F 7737 Roller Arm Adjusting Screw for 52457 and 52461

4480 7725 Arm Shaft (horizontal) Flanged BuShlng (back) Set Screw

4480 7725 Balance Wheel Set Screw for 52187

4480 7725 Feed and Feed Lifting Eccentric Set Screw for 1272C2

4480 7725 Lifting Lever Pin Set Screw for 12237 4480 7725 Thread Take-up Spring Regulator Set Screw.

4530 5936 Presser Bar Guide Bracket Set Screw for 52338

4570 7729 Bobbin Winder Frame Hinge Pin Set Screw for 41583

4570 7729 Bobbin Winder Stop Latch Hinge Stud Set Screw for 41913

4600 7729 Bobbin Winder Tension Stud Set Screw for 150371 and 150459

591F 21808 Rotating Hook Bobbin Oase Tension Regulat ing Screw for 52481

No. Plate 592E 21808

624C 21809 652D 7737 688J 7735 689C 5936 691F 7738 704J 21809

725E 21827 766D 7729

775E 21809

794E 7735

802D 7729

854E 7725 880E 7729 966E 21827

1036C 21809

1036C 21809

1037C 21809

1053D 21809

1065C 7725

1128E 7725 1133E 21809 1133E 21809 1143C 21809

1148C 21809

1253C 21809 1259C 21809

1259C 21809

1259C 21809

1299C 21809

NUUERICAL UST OF PARTS 25

Name

Rotating Hook Bobbin Case Latch Stop Screv for 52473

Thread Retainer Set Screw Roller Screw for 1986

Pressure Regulating Thumb Screw Presser Bar Lifter Hinge Screw Throat Plate Screw

Rotating Hook Bobbin Case Holder Position Bracket Screw

Bed Slide Spring Screw for 12432

Lifting Lever Link Hinge Screw for 52319 and 52320

Needle Bar Connecting Link Cap Screw for 52143,52217 and 127065

Needle Bar Connecting Link Adjusting Screw for 24040, obsolete

Lifting Lever Hinge Screw for 52319 and 52320

Arm Screw (front)

Bobbin Winder Screw for 41915

Feed Lifting Rock Shaft Connecting Rod Cap Screw for 127156

Arm Shaft (horizontal) Bevel Gear Set Screw for 127072

Thread Take-up Crank Set Screw for 24052, 52436,127201 and 127222

Thread Take-up Crank Position Screw for 24052,52436,127201 and 127222

Rotating Hook Thread Guard Screw for 127096

Needle Bar Crank Position Screw for 24052, 52436,127201 and 127222

Feed Regulator Hinge Screw...

Needle Bar Bushing (lower) Set Screw

" " " (upper) Set Screw Rotating Hook Shaft Bushing (back) Set

Screw

Rotating Hook Shaft Bushing (front) Set Screw

Rotating Hook Set Screw for 127095

Arm Shaft (upright) Bevel Gear (lower) Set Screw for 127073

Arm Shaft (upri^t) Bevel Gear (upper) Set

Rotating Hook Shaft Bevel Gear Set Screw for 127073

Feed and Feed Lifting Eccentric Position Screw for 127202

26

No. Plate 1367D 21808

138(E 21808

1429D 2834 1430D 2834

1430D 2834

1513J 21827

1513J 21827 1518J 21827 1518E 21827

1518J 21827

1519J 21809 1520J 5936 1521E 7729

1528D 7737 1547J 7737 1547J 7737

1549J 7737

1550H 2834

1550D 2834 1560C 21809 1562J 2834

1811 7735

1813 21827

1986 7737

2102 3471 2102 3471 2103 7735 2106 2834

2205 7737 2206 7737 2455 2834

NUUERICAL U8T OF PARTS

Name

Rotating Hook Section Screw for 127097 and 127119

Rotating Hook Bobbin Case Tension Spring Screw for 52481

Bobbin Winder Frame Hinge Screw for 60456.

" " Stop Latch Hinge Screw for

60456

Bobbin Winder Stop Latch Lever Hinge Screw for 60456

Feed Lifting Rock Shaft Screw Center Nut for 52097

Feed Rock Shaft Screw Center Nut for 52097

" Connecting Link Hinge Screw Nut

" Forked Connection Hinge Screw Nut for

52451

Feed Lifting Rock Shaft Connecting Rod Hinge Screw Nut

Feed Bar Screw Center Nut for 56813 Presser Bar Lifter Hinge Screw Nut

Lifting Lever Connecting Rod Lock Nut for 52319 and 52320

Roller Screw Nut for 1986

" Arm Adjusting Screw Nut

" " Bracket Screw Center Nut for

52457 and 52461

Roller Arm Lock Spring Screw Nut for 52457 and 52461

Bobbin Winder Stop Latch Hinge Screw Nut for 60456

Roller Screw Nut for 51824

Tension Regulating Thumb Nut for 52098....

Bobbin Winder Tension Disc Regulating Thumb Nut for 27308

Feed Reverse Lever Roller and Stud for 96-44 UaChine.

Feed Lifting Rock Shaft Crank Roller and Stud for 12376 and 52434

Roller, 7/8 in. diam., 9/64 in. face, fine,

Bobbin Winder Tension Disc for 225462 Tension Disc for 52397

Spring for 52397

Bobbin Winder Tension Thread Quide for 27308

Roller Arm Lock Spring for 52457 and 52461

" " Bracket for 52457 and 52461....

Bobbin Winder Tension Disc for 27308, 150374 and 150460

No. Plate 2763 819 2765 22205 2766 22205

2767 22205 2768

2770 22205

2778 22205 2974 21808

2975 21808

4307 7739 4879 7730 4880 819

4881 819 4882 22202 4883 22202 4884 819 4885 819

5596 7732 5598 7732

5599 7732 5601 7729 5670

5735 7730 5990 22202 6337 819

7125 819 7298 7738 7539 22205

7958 7729

8879 5936 8879 5936

8908 21835 8909 21835 9331 2834

NUmiCAL LIST OF PARTS 27

Name

Rock Shaft for 4680 and 12250 «...

" Knee Arm for 2768

" " " " Hub with 356C, for

2768

Rock Shaft aiee Plate with 3560, for 2768.

Rock Shaft I&iee Arm complete, Nos. 2765, to 2767, for 12250

Rock Shaft Stop Dog with 3560, for 4880 and 12250

Rock Shaft Lifting Bracket Hook for 12250.

Rotating Hook Bobbin Oase Latch Lever Ful crum Pin for 40393

Rotating Hook Bobbin Oase Latch Spring for 52473

Bed Slide Spring for 12432 Ohaln Oonnectlng Link for 4885

Rock Shaft complete, Nos. 2763,2770,7125, 12243 and two each 6337 and 12242, for 52319

Treadle for 4885 Shaft for 4885

" Spring for 4885

Stand for 4885

Treadle complete, Nos. 4879,4881 to 4884 and two wood screws 1 In. No. 16, for 52319

Bell Orank for 56848

Bell Orank complete, Nos. 5735 and 56848, for 52319 and 52320

Bell Orank Bracket for 56848

" Hinge Pin for 56848

Ohaln length 26 In. to 35 In. with 56864 and 56865, for 52319

Bell Crank Spring for 5598

Presser Bar Lifter, for 96-44 Uachlne Rock Shaft Lifting Bracket with two 3560,

for 4880 and 12250

Rock Shaft Lifting Bracket Hook for 4880..

Presser Foot Hinge Pin for 52439..'.

Rock Shaft Hanger with two wood screws 1 In. No. 10, for 12250

Bobbin Winder Stop Latch Stop Pin for 60845

Arm Spool Pin Washer (cloth)

Bobbin Winder Tension Bracket Spool Pin Washer (cloth)

Wrench for 1519 and 1520 (Accessories)....

" " 1513 and 1518 (Accessories)....

Bobbin Winder Washer for 41347

28

No.

10141 11170 11204

11241

12237

Plate 2834 5936 21804

2833

22203

12240 5936 12241 5936 12242 819

12243 819 12250 22205

12327 5936

12329 5936 12361 7730 12376 7739

12391 22202 12398 5936 12403 7725

12403 7725

12405 7729 12416 5936

12431 ^{•• •} 12432 21806

14010 7729

•15404 15405

16532 21801

16555 ^ 7730 19219 7729 19220 7730 19226 7730 19397 7729 19398

20067 819

NUMERICAL LIST OF PARTS

Name

Bobbin Winder Tension Spring for 27308....

Presser Bar Spring Washer

Thread Take-up Lever Link Hinge Pin for 52054,52215 and 52447

Bobbin Winder Spool Washer (cloth) for 27308

Lifting Lever with 4480, for 52319 and 52320

Lifting Lever Pin for 52319 and 52320

" " Link for 52319 and 52320....

Rock Shaft Hanger with two wood screws 1 In. No. 10, for 4880

Rock Shaft Lifting Bracket Hook for 4880..

Rock Shaft complete, Nos. 2763,2768,2778, 6337 and two each 2770 and 7539, for 52320

Presser Bar Lifting and Releasing Lever Bracket

Tension Releasing Lever Spring Machine Hinge Connection for 44140

Feed Lifting Rock Shaft Crank with 157J and 1813, for 52385

Presser Bar (hollow)

Tension Releasing Lever Hinge Pin

Arm Spool Pin and Thread Eyelet for 52175 and 127193

Bobbin Winder Tension Bracket Spool Pin and Thread Eyelet for 150374 and 150460 Machine Rest Felt (Accessories)...

Lifting Lever Connecting Rod Joint for 52319 and 52320

Bed Slide for 12432

Bed Slide complete, Nos. 4307,12431 and two 725E

Bed Frame Hinge Plate Rivet for 20067 Trade Mark for 127214

" Rivet for 127214 Arm Dowel Pin

Bed Frame Hinge Plate for 20067

" Cushion (leather) for 20067

" " " Spring for 20067

" " Hinge Connection for 19398

" " " " Cap for 19398..

19226 with 211E and 19397, for 20067

Machine Base Bed Frame with two each 16555 19398, four each 19219,19220, six each 14010 wood screws 1 1/4 In. No. 12 and eight 158C

No. Plate 20356 7738

20357

24040 7736

24041 21804

24052 22203

24894

25446 7729 25866 22201 26026 21835 26231 7738 26485 21835 26603

27306 2834 27307 2833 27308 2833

27739 22204

28360

29633 7739 32572 7735 32574 7735 34105 21834 36818 22202 36819 7736 36820 22202 36821 22202

40264 21808 40274 21808

40392 21808 40393

40394 21808

41339 2833 41340 2833 41341 2833

NUMERICAL LIST OP PARTS 29

Name

Throat Plate, large needle hole, for 26603 28360 and 121446

Throat Plate, small needle hole, for 26603 28360 and 121446

Needle Bar Connecting Link with 794E, for 24894, obsolete

Needle Bar Connecting Stud with 207E, for 24894 and 52206

Needle Bar Crank with 10360,10370 and 1065C, for 96-41 Machine, obsolete Needle Bar Connecting Link 24040 with

24041, for 52143, obsolete Bobbin Winder Screw Washer for 41915 Guide

Screw Driver (large) Accessories

Presser Foot Spring for 52427 and 52439...

Screw Driver (small) Accessories

Feed Dog, 20 teeth (16 teeth to the Inch) for 20356 and 20357

Bobbin Winder Spool Pin for 27308...

" " Stand for 27308 Bobbin Winder Spool Stand complete, Nos.

418E,1562J,2106,10141,11241,27306,27307 and two each 2455 and wood screws 1 In.

No. 10, for 41348

Thread Unwinder Thread Cone (wood) for laige cones.

Feed Dog, 15 conical teeth (12 teeth to the Inch) for 20356 and 20357

Feed Rock Shaft Crank with 157J, for 52387 Tension Releasing Disc for 52397

Pin for 52397

Bobbin Winder Frame Hinge Pin for 60845...

Finger Guard for 36821

" " Friction Washer for 36821....

" Holder with 196J, for 36821..

Finger Guard complete, Nos. 36818 to 36820 and 50316J

Rotating Hook Bobbin

" " Section for 127097 and 127119

Rotating Hook Bobbin Case Latch for 40393.

" Hinge, Nos. 2974 40392 and 125320, for 52473

Rotating Hook Bobbin Case Tension Spring for 52481

Bobbin Winder Base for 60456

" " Frame for 60456

" Spring for 60456

30

No.

41342 41343 41344 41345 41346 41347

41348

41400 41583 41585 41586 41587 41588

41593

41594

41595

41913 41914 41915

42367

42614

43944 44139 44140

Plate 2833 2834 2834 2834 2834 2833

22202 21834 21834 21834 21834 21834

5936

5936

5936

21834 21834 21834

21801

21834

5936 7730

44212 7734 50053J 21827 50083C 21827

50117E 21827 50190J 21827 50190J 21827 501910 21827

50191C 21827 50193J 7735 5023«: 7737

NUMERICAL LIST OF PARTS

Name

Bobbin Winder Pulley with 200F, for 60456.

" " Spindle for 60456

" " Stop Latch for 60456

" Finger for 60456.

" Uver for 60456..

Bobbin Winder Nos. 60456 and two each 9331 and wood screws 1 In. No. 10 R;H.B. for 41348

Bobbin Winder (swinging automatic, right

hand) complete,^os. 27308 and 41347...

Machine Rest Pin (wood) Accessories Bobbin Winder Frame with 457C, for 60845..

" Pulley with 171D, for 60845..

" Spindle for 60845

" " Stop Latch for 60845

" m n n Tripping Ami with 185H, for 60845

Bobbin Winder Tension Spring for 150374 and 150460

Bobbin winder Tension Stud for 150374 and 150460

Bobbin Winder Tension Thread Guide f o r 150374 and 150460

Bobbin Winder Bracket with 4570, for 60845

" " Frame Spring for 60845

" 60845 with 880E and 25446,

for 150375 and 150461

Arm Oil Tube Packing (braided cotton) for

52185 and 127187

Bobbin Winder Stop Latch Hinge Stud for 60845

Tension Releasing Lever Machine Hinge Plate for 44140

Machine Hinge complete, Nos. 12361,44139 and merllzed wood screw 1 1/4 In. No.14 (Accessories)

Drip Pan with four 1 In. wire nails Arm Side Cover Thumb Screw

Feed Connecting Link Hinge Stud Set Screw for 52408

Feed Dog Screw

Face Plate Thumb Screw Oulde Thumb Screw

Feed Lifting Rock Shaft Screw Center for 52097

Feed Rock Shaft Screw Center for 52097....

" Regulating Stud Head Cap Screw Rotating Hook Shaft Bevel Gear Case Plug

Screw for 127007

No. Plate 50302J 7736

50304C 7735 50305C 7725 50316^ 7736 50338E 7735 50339D 7735 51460F 7725 51824 7737

51846 7737

52014 22201 52016 5936 52018 21808

52021 7736 52022 22201 52023 21809 52024 21804 52025

52027 7735 52028 22203

52045 7736

52045 7736

52051

52052 21811

52053 7725 52054

52063 21811 52073 21827 520ft3 7735

52097

52097

52098

52130 7725

52143

52148 21801

NUMERICAL LIST OF PARTS 31

Name

Finger Guard Holder Screw for 120497 and 120858

Tension Stud for 52098

" " Set Screw for 52083 Finger Guard Set Screw for 36821 Feed Regulating Stud

" Reverse Lever Hinge Screw...

Needle Clamp Screw for 52307

Roller, 9/16 in. dlam., 3/16 in. face, coarse, with 388D and 1550D, for 52457.

Feed Reverse Lever Roller and Stud for 52409

Needle Bar Bushing (upper)

Presser Bar Lifter

Rotating Hook Bobbin Case Holder Position Bracket

Thread Take-up Crank for 52143, obsolete..

" " Lever with 52130, for 52025

" Hinge Pin for 52025..

" Link for 52025

Thread Take-up Lever complete, Nos. 52022 to 52024, for 52054,52215 and 52447....

Thread Guard (side of arm)

Lifting Lever Connecting Rod for 52319 and 52320

Rotating Hook Shaft Bushing (back) Packing (wick) for 127043

Rotating Hook Shaft Bushing (front) Pack ing (wick) for 127044

Face Plate for 52052

Face Plate complete, Nos. 52051,52053, 52170 and two 226J

Face Plate Thread Guard (lower) for 52052.

Thread Take-up complete, for 96-41 Machine Nos. 11204,52025 and 52143, obsolete...

Balance Wheel Oil Cover

Feed Connecting Link Hinge Stud for 52411.

Thread Take-up Spring Regulator with 50305C, for 52397

Feed Lifting Rock Shaft Screw Center 50191C with 1513J

Feed Rock Shaft Screw Center 50191C with 1513J

Tension Stud 50304C with 1560C, for 52397.

Thread Take-up Lever Thread Eyelet Bushing for 52022

Thread Take-up Crank 52021 with 775E and 24894, for 52054, obsolete

Arm Oil Tube for 52149