Effects of heat treatment on properties of multi-element low alloy wear-resistant steel

The probability of attending school four our group of interest in this region increased by 6.5 percentage points after the expansion of the Bolsa Família program in 2007 and

With respect to the sample shape, the disk shape carried out to significantly higher drying rates only for D’água cultivar without blanching.. Blanching was significantly influent,

The effect of intercritical heat treatment temperature on the tensile properties and work hardening behavior of ferrite-martensite dual phase steel sheets. Materials Science

This work analyzes the influence of the heating rate on the kinetics and microstructural evolution of austenite formation in the continuous heating of a low carbon steel with

the final carbonization temperature reduced the gravimetric yield in charcoal, the content of volatile materials and hydrogen, with a higher content of fixed carbon, carbon and

This work focuses on the effects of the carburizing temperature and time on the mechanical properties of mild steel carburized with activated carbon, at 850, 900 and 950

The level of heat treatment temperature showed more pronounced effect on the physical and mechanical properties of particleboard obtained from bagasse than the exposure time..

he alloying elements of maraging steel, such as molybdenum, titanium, nickel, cobalt, aluminum, and others, have a great influence on the mechanical properties of this alloy, in