The Carbon Nanotubes Effect into Single-lap Joint Failure Modes and Load Capacity: a Macromechanical Analysis

The aim of this study was to evaluate the effects of sodium hyaluronate (HY), single-walled carbon nanotubes (SWCNTs) and HY-functionalized SWCNTs (HY-SWCNTs) on the behavior of

Therefore, the confinement effect of carbon nanotubes may considerably influence the distribution of metal particles, without the confinement effect of the tubes, the cobalt and

Thus, the objective of this work was to process nanostructured composite materials based on formulations containing different quantities of multiwalled carbon nanotubes in an

nanotubes effect as interlayer into carbon/epoxy laminated composites, five different CNTs forests were grown in situ.. into the plain weave

Thermal and mechanical properties of a nanocomposite of a photocurable epoxy-acrylate resin and multiwalled carbon nanotubes. Materials

The procedures consisted in a two steps route based on acid oxidation of carbon nanotubes (CNT) followed by suspension in an Ag ion solution; and a single step route, based on

This paper presents the effect of nonlocal scaling parameter on the coupled i.e., axial, flexural, shear and contraction, wave propagation in single-walled carbon nanotubes (SWC-

ABSTRACT: The focus of this study is to evaluate the effect of carboxyl and amino functionalization of multi- walled carbon nanotubes on the mechanical property of the epoxy