• Nenhum resultado encontrado

Cerâmica vol.53 número327

N/A
N/A
Protected

Academic year: 2018

Share "Cerâmica vol.53 número327"

Copied!
1
0
0

Texto

(1)

334

Alumina Densidade % densidade Dureza KnoopDureza Knoop CoeicienteCoeicienteCoeiciente (g/cm

(g/cm3) teórica (kgf/mm(kgf/mm2)(500g) de Desgastede Desgaste

(x10 (x10-13m2 N-1)

A-16SG 3,94±0,01 99,0±0,3 1677±26 7,7±0,1

A-1000SG 3,93±0,01 98,7±0,3 1628±27 7,3±0,1

A-3000SG 3,91±0,01 98,2±0,3 1580±26 7,4±0,1

A Tabela I do artigo "Colagem de barbotina de aluminas submicrométricas comerciais" (Slip casting of commercial aluminas with ine powder), J. Catafesta, R. Andreola, C. A. Perottoni, J. E. Zorzi correta é publicada abaixo.

Errata

Tabela I - Resultados dos ensaios nas amostras das aluminas.

Imagem

Tabela I - Resultados dos ensaios nas amostras das aluminas.

Referências

Documentos relacionados

Find convergence rates for the optimization algorithms; Can we improve the speed by, instead, solving the linear equation;.. ∇g(φ ? ) = 0

Going forward to the 1ST and 2ST sintered samples obtained from the modified Pechini precursor powder, the XRD results (Figure 2 A–F) clearly show the presence of additional

Results: The results showed that the physical and mechanical properties of the experimental TFMs with ZM are comparable with the properties of the commercial reference and

Nominal return on assets (NROA) is defined as profits for the year before taxes divided by total assets at year end net of fixed assets depreciation.. Nominal

The resistivity of the barrier layer depends on both the geometry and the activation energy required to surmount the height of the potential barrier. The resistivity anomaly of the

8 61 Caracterização de resíduo (lodo) proveniente de estação de tratamento de águas visando sua utilização em cerâmica vermelha Oliveira, E. 9 61 Avaliação

In this context, ceramic pigments based on iron oxide (Fe 2 O 3 ) doped with lanthanum or yttrium, were synthesized from polymeric precursors using Pechini´s

Some authors consider the solid solution formation and vacancy creation as the cause of zirconia stabilization. 5b) shows the same phases observed in the ZY solid solution.. Phases