• Nenhum resultado encontrado

User Guide SimStart

N/A
N/A
Protected

Academic year: 2022

Share "User Guide SimStart"

Copied!
9
0
0

Texto

(1)

www.laerdal.com

SimStart

User Guide

(2)

SimStart is a new training solution to simulate the use of an AED or a Monitor Defibrillator on Laerdal’s existing LLEAP Patient Monitor. AED or Monitor Defibrillator settings are controlled via LLEAP or SimPad PLUS.

Laerdal recommends running SimStart on a LLEAP tablet. Choose between AED or Defibrillator Monitor in Patient Monitor.

SimStart

(3)

Alarms Off

Pause Alarm

Pauses alarm sounds for 3 minutes

Settings / Shut Down Tap to

Activate Waveforms

Metronome On/Off

Monitor

Control Panel Toolbar Volume Control

Battery Indicator

Interface Overview - Monitor Defibrillator

Date / Time Duration

(4)

Interface Overview - AED

Settings / Shut Down Tap Screen to

Activate Pads

Metronome On/Off Instructions Prompts Volume Control

Battery Indicator

Date / Time Duration

Toolbar

(5)

1

2

1

2

Simulation with Standardized Patient Simulation with Simulator

Setup - SimPad PLUS

Turn On Simulator

SimStart SimStart

SimPad SimPad

Launch Laerdal Simulation Home on SimStart and select application Launch Laerdal Simulation Home

on SimStart and select application

Connect Devices and Simulator to the same

WiFi network Connect Devices to

the same WiFi network

(6)

Change Settings and Screen

Tap to open themes

SimPad PLUS - System Setup

Select theme

for simulation In menu and select

Patient Monitor

Tap to change screen

On/Off

AED / Monitor Defibrillator Select SimStart Screen

Toggle On/Off vital signs

Customize settings

(7)

1

2

1

2 Setup - LLEAP

Simulation with Standardized Patient Simulation with Simulator

Turn On Simulator

SimStart SimStart

LLEAP Instructor Monitor

Launch Laerdal Simulation Home on SimStart and select application Launch Laerdal Simulation Home

on SimStart and select application

LLEAP Instructor Monitor

Connect Devices and Simulator to the same

WiFi network Connect Devices to

the same WiFi network

(8)

Controlling SimStart LLEAP - System Setup

Monitor Defibrillator Control Panel

AED Control Panel

Activate wave forms

Place Pads On/Off

Control Panel

(9)

www.laerdal.com

© 2019 Laerdal Medical AS. All rights reserved. 20-15052 Rev B

Referências

Documentos relacionados

AEDトレーナ2は、レールダル・リンク・テクノロジーを用いたAEDリトルアンやAEDレサシアンと共に使用することがで

Training pads with a yellow connector are for use with any manikin; those with a white connector and "Laerdal Link Technology" logo are for use with AED Little Anne and

- Laerdal AED Trainer 2 är utvecklad för att användas tillsammans med träningsdockorna AED Little Anne och AED Resusci Anne som med Laerdals länkteknik svarar på plattornas

Som alternativ kan HeartStart Training Pads III eller Laerdal LINK-systemet bruges, så AED Trainer 3 automatisk registrerer, når elektroderne er korrekt placeret. AED Trainer

The steps below provide supplementary guidance to the AED Trainer 3 Direction for Use on how to update the AED Trainer 3 parameter settings using the configuration software from the

When a USB-camera and a microphone and or a Patient Monitor are added to the PC, can you record both video and audio to support the debriefing of the scenario with the students

Pair LLEAP with your Laerdal simulator, instructor computer and patient monitor of your choice to create the perfect training combination. Choose from the following instructor

• To prevent skin pitting on the RA AST AED Link version, do not apply conductive gel or conductive defibrillation pads intended for patient use.. • Do not provide