Science Arts & Métiers (SAM)

doesnot contribute tothe production ofentropy and, conversely,that the entropy functionaldoes not contribute to re-

Results and discussion Figure 1: Ranking of the situations based on peak values of right and left handrim total force during propulsion Results based on total force are presented on

Ahmadi Institute of Mechanical Engineering I2M, TREFLE department, Arts et Métiers ParisTech - Talence, 33400 Key words: porous media, numerical simulation, inertial effects,

For instance, the shape of the force maps as a function of the size parameter D/λ and the space coordinates remains the same for plane standing waves and it is very similar in the case

Bollec aArcelorMittal Research, Voie Romaine-BP30320, 57283 Maizières-lès-Metz Cedex, France bArts et Metiers ParisTech, PIMM UMR CNRS 8006, 151 Bd de l’Hôpital 75013 Paris, France

Tab.2: Levels of parameters Parameter Low level High level NiTi material Austenitic Martensitic Strategy Up-milling Down-milling Cutting speed m/min 30 60 Feed per tooth µm 6 12

For the manufacturing tolerancing, we advocate to consideration the form tolerance specification 1 – Figure 3, the form position tolerance with the teeth datum system specification 4 –

In fl uence of injection molding on the electrical properties of polyamide 12 fi lled with multi-walled carbon nanotubes Sophie Versavauda, Gilles R egniera,*, Gw ena€ el Gouadecb,c,