Science Arts & Métiers (SAM)

For instance, the shape of the force maps as a function of the size parameter D/λ and the space coordinates remains the same for plane standing waves and it is very similar in the case

2k 1A B1 D2L TEM = w L 3 where kw1 is the winding factor, AL A/m is the stator rms electric load, B1 T is the peak value of the fundamental of the magnets flux density at the stator

For all of these reasons, a Q4P1 shape function based on global DIC approach has been chosen for the present study, concerning the displacement field measurement during orthogonal

Thus, this harmonic, if exploited, can increase significantly the torque density of the machine[5].The main drawback of such configuration is the magnetomotive force MMF spectrum which

Effect of Foam Bubble Size on Foam Rheology.In Figure 12, the results of apparent viscosity as a function offlow rate are compared in 1 mm GB main column, in which foam was pregenerated

13.FO around the WL at different distances from the insert tip in the 4 characteristic layers across the thickness for 3 mm plates with slit insert left and 1.5 mm plates with

Vertical versus orthogonal distance minimization The evaluation of the effect of fitting data based on vertical and orthogonal distance minimization is achieved here by using the

Discussion The present study has shown the reliability of ultrasound SWE in the assessment of the shear modulus of the lumbar multifidus muscle at level L2-L3 in two postures: passive