Science Arts & Métiers (SAM)

Finally, a precise detection of the faces involved in each contact area is made and the resulting input domains identified are processed using a local Frontal Delaunay re-meshing

To be sure to not Nomenclature n number of parts X vector of part dimensions Xi ith part dimension Ti Xitarget value ti Xitolerance LSLi,USLirespectively lower and upper specification

Therefore, comparisons of predicted and experimental flow patterns reveal that a better match is obtained for the high friction coefficients in the case of 0.25 m s−1ram speed and for the

Despite the significant chemical activity, the re- sults confirm the classical transition scenario for high- Mach number boundary layers, for which the second- mode resonance is the

The spec- ifications for the tracers finally read as follows: must be non-toxic in compliance with the RoHS regulations, must not exceed 0.06€/kg of polymer, must improve detection

Because the only steel that resists LME is the one that shows stability over α’ phase change due mostly to its higher nickel content, a point confirmed by X Ray fractography, it is

The microstructure of this anomaly is only observed in chips: the adiabatic shear band similar to that observed within the chip evolves from a deformed layer to a transformed layer,

Finally, these spatial distributions show that this von Kármán vortex shedding is solely related to what occurs in the vicinity of the trailing edge and in the wake, thus highlighting