Science Arts & Mйtiers (SAM)

Nomenclature a, b material parameters of the Crossland criterion ~B magnetic induction ~E electric field E Young modulus H~ magnetic field ~J electric current density n unit normal

AFM contact scales, glass fibers show the same tribological behavior as at the macro-tribo- contact scales at dry conditions where the dynamic friction coef- ficient decreases also by

In this paper, residual plastic strain distributions in the machined surface and subsurface, induced by the orthogonal cutting of OFHC copper under practical machining conditions

Bennett and McDowell 2003 have used several mechanical quantities the maximum slip amplitude, an equivalent stress inspired by the Dang Van criterion Dang Van, 1973 and an equivalent

To simulate the adhesion of the reactive fluid on the mold surface, we developed a model to fix the fluid particles when they reached a certain viscosity and when they are exposed to a

Three points will be discussed: ➀the high oxidation rate of pDCPD in thin samples and the occurrence of degradation in thick samples where oxygen diffusion is the limiting step, ➁the

The lack of moist air and the sharp strain gradient on the one hand, and the higher stress triaxiality around an internal pore, on the other hand, cer- tainly make fatigue crack

Comparison between experimental and numerical results The purpose of this section is to discuss the effect of the different stress–strain constitutive models that take into account