Science Arts & Mйtiers (SAM)

AFM contact scales, glass fibers show the same tribological behavior as at the macro-tribo- contact scales at dry conditions where the dynamic friction coef- ficient decreases also by

This rather simple model allows a rapid and easy estimation of the KH depth as a function of the operating parameters incident laser power, focal spot diameter, welding speed and

Bennett and McDowell 2003 have used several mechanical quantities the maximum slip amplitude, an equivalent stress inspired by the Dang Van criterion Dang Van, 1973 and an equivalent

To simulate the adhesion of the reactive fluid on the mold surface, we developed a model to fix the fluid particles when they reached a certain viscosity and when they are exposed to a

Three points will be discussed: ➀the high oxidation rate of pDCPD in thin samples and the occurrence of degradation in thick samples where oxygen diffusion is the limiting step, ➁the

Keywords Fouriertransforminfrared,FT-IR,spectroscopy,imaging,infrared,IR,calibration, paraffin Introduction Fourier transform infrared FT-IR spectroscopy with an array detector is an

Adding fillers is known to increase the material stiffness see review1, increase its Mullins softening,2 and delay its fracture in monotonous loading3 as in fatigue.4Increasing the

Two configurations are tested, one where thefilter covers the entire lower surface of the quartz window and another where it is placed in a ring close to the reactor wall to confine the