To register a mobile phone of another brand to the Twist619 base station, put the base station in registration mode and then follow the procedure in the manufacturer's instructions. In this case, you must first connect the line adapter to the line cord before connecting the line cord to the line jack. Select the function displayed on the screen or go to the next lower level in a menu.
When navigating menu, press to move to the previous higher menu level (Back is displayed). In other modes: Scroll up and down a menu list or go to the previous or next record in the Phone Book, Redial List or Call Log. In idle mode: Make an external call or answer an incoming external or internal call.
N #/Ringing on/off & Pause key # In idle mode: Long press to turn ringer on/off. Calling or Editing: Long press to insert a pause (during pre-dial) and short press to insert one.
Display icons and Messages
Press the key directly below to erase (delete) a character or number when making an entry.
Overview of the base station
Connect the base station 1 Place the base station in a central
Wall mounting the base The base is designed to support wall
5 Align the mounting hole on the back of the base with the screws on the wall.
Install your phone
Install battery
Charge battery
Configuration of your Twist 619 telephone
Menu structure
SMS Center SMS Center 1 Enter the Incoming SMS Center 2 and Outgoing SMS Center 3 numbers Default SMS Center 1.
Make a call
- Predialling
- Direct dialling
- Call from redial list 1 Press r in idle mode
- Call from the call log
- Call from the phonebook 1 Press d in idle mode
- Call from the phonebook while already on the phone
- Call using Direct Access Memory
- Enter a Dialing Pause Long press # to enter a pause in the
Press a number button 3 to 9 for more than 2 seconds to call a stored direct access memory number. See section 5.6.7 for instructions on how to store, modify and delete direct access memory numbers.
Answer a call
Handsfree answering Handsfree activation can suddenly
End a call
Switch the handset off/on To switch the handset off, press and hold
Keypad lock/unlock
Text or number entry When you select a field in which you can
Call in progress
Adjust earpiece or speaker volume
Mute/Unmute microphone When the microphone is muted, your
Activate/Deactivate loudspeaker mode
Chain dialing
Using your Phonebook Your phone can store up to 200
- Store a contact in the phonebook
- Access phonebook 1 Press d in idle mode and scroll n
- Modify a phonebook entry 1 Press m in idle mode
- Select phonebook melody With this function you can personalize
- Delete a phonebook entry 1 Press m in idle mode
- Delete all phonebook entries 1 Press m in idle mode
- Direct access memories - PhoneMail
- Add/Edit Phonemail 1 Press m in idle mode
- Delete PhonemailNote
Instead of scrolling n to browse through the phonebook entries, you can press the numeric key that corresponds to the first letter of the entry you want to find. While editing, press c Clear to delete the last entered number or character, or long press to delete everything. When first ring detection is set to On, a normal tone sounds first and then changes to the personal phonebook melody.
A long press on the keys in idle mode will automatically call the stored phone number. telephone services) offered by Belgacom. Scroll with n to the phonebook entry you want to save to the selected direct access memory number and press o Select.
Using the Redial list
Access Redial list
View redial number details 1 Press r in idle mode, scroll n to
Save a redial number into the phonebook
Delete a redial number 1 Press r in idle mode, scroll n to
Delete all redial numbers 1 Press r in idle mode, and press
Call waiting
Using the Call log
- Access the Call log 1 Press u in idle mode, and scroll n
- Save call list entry into the phonebook
- Delete a call list entry 1 Press u in idle mode, scroll n to
- Delete all call list entries 1 Press u in idle mode, and then press
4 Enter number is displayed and the selected number from the call list appears in the number field. Press c Clear to delete the last entered number or character, or long press to delete all.
Using the Intercom
- Intercom another handset If the handset does not belong to
- Transfer an external call to another handset
- Answer an external call during intercom
- Switch between an internal and external call
- Establish a three-party conference call
2 If there are more than 2 registered handsets, scroll n to select the handset to call and press o OK. Pressing h on any handset exits intercom mode and other handsets return to idle mode. If an external call comes in during intercom and you want to accept this call, you must first exit intercom mode.
1 During the call, press i to put the external call on hold (the caller can no longer hear you). 2 Scroll n to the handset number you want to transfer your external call to and press o Select. 3 Press t on the called handset to answer the internal call, allowing both internal callers to talk.
If there is no answer from the called handset, press i to resume the external call. The conference call function allows sharing an external call with two handsets (in intercom).
Paging
Clock and Alarm settings This feature allows you to set the date,
- Set Date and Time 1 Press m in idle mode, scroll n to
- Set Time and Date Format
- Set Time Format 1 Press m in idle mode, scroll n to
- Set Date Format 1 Press m in idle mode, scroll n to
- Set Alarm
- Set Alarm Tone
4 Scroll n to select DD/MM or MM/DD and press o Select to select the option. If you select On Once or On Daily, enter the time (UH-MM) for the alarm. If you select Off, a confirmation tone is emitted and the screen returns to the Clock and Alarm menu.
The alarm sound and alarm icon sound/flash for 1 minute when the alarm time is reached.
Change the Handset Name You can name the handset and display the
Handset Tones
Set the Ring Volume When the handset rings during an
Set the Ring Tones
Activate/Deactivate Key Beep
Change the Display Language Your handset can support different
Select the Display Wallpaper There are 3 wallpaper images available on
Select the Color Theme There are 4 color themes available on
Set the Display Contrast You can change the contrast of the text
Set the Backlight Time You can change the backlight timing for
Deactivate/Activate Auto Hang-Up
Easy Call
Set Easy Call to On or Off Follow this procedure to switch Easy Call
Set Easy Call number 1 Press m in idle mode, scroll n to
Auto Conference
Call Barring
Set Call Barring Mode By default, Call Barring is OFF
Set a Call Barring number 1 Press m in idle mode, scroll n to
XHD Sound
Change PIN
Registration
Easy registration
Upon successful registration, a confirmation tone is sent and the mobile phone number (1 to 5) will be automatically assigned by the base.
Unregister
Reset Unit
Change Flash time
Set First Ring Detection First ring detection allows the phone to
Default SettingsNote
The Call Forward, Call Forward on Busy, and Call Forward on No Answer features require activation codes (prefix and suffix) and a deactivation code.
Call Forward
Change Call Forward Activation Codes
Change Call Forward Deactivation Code
Call Forward when Busy This function will forward incoming calls
Change Call Forward when Busy Activation Codes
There are two parts to the Call Forwarding When Busy activation code - a prefix and a suffix.
Change Call Forward when Busy Deactivation Code
Call Forward when Unanswered
Change Call Forward when Unanswered Activation
There are two parts to the Call Forwarding When Unanswered activation code - a prefix and a suffix.
Change Call Forward when Unanswered Deactivation
Phonemail
Access Phonemail
Set Phonemail Number 1 Press m in idle mode, scroll n to
Call Return This function allows you to get
Access the Call Return Service
Set Call Return Service Number
Cancel Call Back
Call the Cancel Call Back Number
Set the Cancel Call Back Number
Write and Send an SMS 1 Press m in idle mode, scroll n to
4 The display shows Send to: and asks you to enter the number you want to send the message to. Long press c Delete to delete the entire entry and go to the phonebook to select another number. 7 At this point you have the option to send the message or save it as a draft.
If the message is successfully sent, “SMS sent!” is displayed and the handset returns to idle mode. The purpose of the destination mailbox number is to ensure that the SMS is well received on the destination phone. The default field number is programmable and can be changed in the SMS settings menu under “SMS” ➝ “Settings” ➝ “Receive SMS” ➝ “Change no. fields”.
Inbox
Read SMS Messages (Check Inbox)
Save the Number of an SMS Message
If the inbox is empty, "No message". will display for 2 seconds and the handset will return to idle mode. 2 Press o Option to open the inbox submenu, then scroll n to Delete all and press o Select.
Drafts
- Open a Draft
- Send a Draft
- Edit a Draft
- Delete a Draft
- Delete all Drafts
Press c Back to return to the SMS submenu.). is displayed momentarily and then Deleted. is displayed briefly, and the screen returns to the SMS menu. Press c Back to return to the draft submenu.). is displayed for 2 seconds and the screen returns to the SMS inbox. 2 Press o Option to open the draft submenu, then scroll n to Clear all and press o Select.
Settings
SMS Reception
- Turn SMS Reception ON/
- Change the SMS Box Number (Country
SMS Centre
A confirmation tone sounds and the display returns to the previous screen so you can enter the second number. When you have finished entering both outgoing and incoming numbers, press c Back to return to the SMS center menu.
Default Centre
Playing Messages
Playback of messages via handset
Functions available during playback
Delete all messages Deleted messages cannot be recovered
Turn the Answering Machine On/Off
Play, Record, or Delete an Outgoing Message
Set the Answer mode There are 2 answer modes available
Answering Machine Settings
- Ring Delay
- Remote Access
- Activate/Deactivate Remote Access
- Controlling the Answering Machine from
- Handset Screening When Handset call screening is set to
- Setting the Outgoing Message Language
If there are new messages on the answering machine, it will answer the line after 2 rings. If there are no new messages on the answering machine, it will answer the line after 4 rings. So if you want to check if you have messages without incurring call charges, you can end the call after the third ring.
You can listen to the messages on your answering machine by calling from an outside line and entering the remote control code*. The remote access code (the same as your PIN code) prevents unauthorized remote access to your answering machine. If the answering machine is turned off, the phone switches to remote access mode after 10 rings.
The following table indicates how to access the answering machine functions using the telephone keypad. If you have multiple mobile phones, only one handset can activate mobile call screening for each call.
Connection
Set-up
Sound Handset does not ring!
Product behaviour Keypad does not work!
Try again by disconnecting and reconnecting the base station's power supply and follow the procedure to register a handset (see section 7.6). If no keys are pressed for 30 seconds, the handset will automatically return to idle mode. It will also automatically return to idle mode when you place the handset back on the base station (if the auto hang-up feature is on).
Reset the handset to revert to the default PIN if it has been changed previously (see “Reset the unit” - section 7.8). Make sure that the answering machine is connected to the power adapter and that the adapter is connected to a mains power supply that is switched on. Try unplugging the electrical outlet and plugging it back in after 1 minute.
If the above solutions do not help, turn off the power to the handset and the base unit.
14 INDEX
Delete all drafts 52 Delete all messages 54 Delete all phonebook entries 28 Delete all redial numbers 30 Delete all SMS messages 51 Delete an SMS message 50 Delete telephone mail 28 Direct calls 23.
