Grain refinement of AZ91D alloy by intensive melt shearing and its persistence after remelting and isothermal holding

The organophosphate pirimiphos-methyl, one of the main grain protectants used against stored product insects in Bra- zil, is frequently used in these operations (Andrei, 1999) and

Values of soil pH, P, K, and exchangeable Al in the soil samples collected in plots with grain corn after each corn growing season, as affected by addition of increasing rates

It is observed from the Radial Force Graph that when depth of cut kept constant & speed is increased continuously, clearly shows that Casting without addition

Grain refi ning mechanism of a carbon addition method in an Mg-Al magnesium alloy. Reply to comments on “Grain refi ning mechanism of a carbon addition method in an Mg-Al

Technical Institute, University of Rzeszow, Rejtana 16a, 35-111 Rzeszow, Poland *Corresponding author. The surface layers of the tested steels were remelted with the electric

5 Variations of the grain size (a) and shape factor (b) with the heating time for the ECAPed AZ91D alloy after being heated for 15 min at 570 ℃.. The interface energy rapidly

To summarize, although we observed some differences in the statistics for data obtained from early visual areas as compared to those observed in our category-selective ROIs (Figure

The grain refining efficiencies of the master alloys are affected by many factors which include size, morphology of the grain refiner, melt holding time, melt