Simulation of a Sponge Iron Production Process

1 SIMULATION OF THE TEMPERATURE FIELD OF A CONCAST SLAB The analysis of influence of the main thermophysical properties of slab material on calculation accuracy of temperature

The presence of the alpha megascleres represented 100% of the species spicular set by April, when the peak of high water was reached. In August 2010 the beta megascleres of the

1GBASE represents a modern ethanol distillery using all lignocellulosic material for electricity generation, and scenarios 1G+FF/S and 1G+FF/M represents two options of

Several research works have been done to assess the effect of the cutting depth on the cutting forces when using picks. In this case, the cutting tests need im-portant equipment

Analysis of the flotation concentrate through SEM showed that a greater recovery was not possible due to the presence of lead inside the iron particles. Flotation separation

The implemented model resulted in an increase in the production capacity of 5,000L.d -1 of yoghurt, corresponding to a production of yoghurts processed daily three times higher

extraction yields and CGC purity. Mannans were not recovered in either study. C, the best conditions, as defined by the RSM model, were used, which corresponded to the ones of Exp.

Mehani č ke osobine hemijsko-termi č ki obra đ enih materijala dobijenih sintermetalurškim postupkom zavi- se od velikog broja faktora: kvaliteta i sastava osnovnog materijala, na