Equipment
the shield, typically four or five times the diameter
Allow as much flat terrain as possible to assemble
Area Requirments
(25lb).
diameter of 1.2m (4Ft). The shield weighs 12Kg
bulletin apply to a shield for antennas with a
parabolic antennas. The instructions given in this
side-lobe radiation levels of high-performance,
This 3-piece shield is designed to further reduce
Description
maintenance and condition of equiptment.
personnel to verify proper installation,
should be inspected once a year by qualified
been written for such personnel. Antenna systems
personnel. Andrew installation instructions have
antenna systems requires qualified, experianced
The installation, maintenance or removal of
Notice
Tools
of the antenna.
Item
Qty
Description
237267-22
A RE 00Bulletin
Rev Status Model VersionVersion Status Rev
Antenna Shield and Radome
For High-Performance, Parabolic Antenna
1 of 7 page
Installation Instructions
F RE 01Main Hazards – Health Effects
Eyes: May cause irritation.
Inhalation: Viscous nature may block breathing passages if
inhaled.
Ingestion: May cause diarrhoea.
Skin: For hypersensitive persons, may irritate the skin after
long periods of contact.
Respiratory Protection: None needed.
Hand Protection: Protective gloves for hypersensitive
persons.
Eye Protection: Glasses, if applied to parts in motion.
Body Protection: Overalls.
B
Absorber
High piont
(top) of shield
Absorber
side up
Flat washer
for clarity
Spring washer
Nut
Absorber removed
bolt
M6x16mm
Flat washer
HD SCREW
M6 x 16 HEX
H1
237267-22
A RE 00Bulletin
Rev Status Model VersionVersion Status Rev
Antenna Shield and Radome
For High-Performance, Parabolic Antenna
2 of 7 page
Installation Instructions
F RE 01mounting nut
Radome
arrangement
Typical overlap
Absorber
Full absorber
antenna shield
237267-22
A RE 00Bulletin
Rev Status Model VersionVersion Status Rev
Antenna Shield and Radome
For High-Performance, Parabolic Antenna
3 of 7 page
Installation Instructions
F RE 01plastic fastener
RF absorber
H3
Reflector mountin holes
Assembled shield
Antenna shield arrangement
M6x16 bolt
for clarity
Shield segment removed
washer
Nut
Spring washer
Flat
SHIELD/RADOME RING PREP
237267-22
A RE 00Bulletin
Rev Status Model VersionVersion Status Rev
Antenna Shield and Radome
For High-Performance, Parabolic Antenna
4 of 7 page
Installation Instructions
F RE 01Remove Tape
Add Wire Mesh
RF Gasket
SHIELD/RADOME RING POSITIONING
237267-22
A RE 00Bulletin
Rev Status Model VersionVersion Status Rev
Antenna Shield and Radome
For High-Performance, Parabolic Antenna
5 of 7 page
Installation Instructions
F RE 01SHIELD/RADOME RING FITTING
237267-22
A RE 00Bulletin
Rev Status Model VersionVersion Status Rev
Antenna Shield and Radome
For High-Performance, Parabolic Antenna
6 of 7 page
Installation Instructions
F RE 01Nut
M6x16mm Bolt
Flat washer
Lock washer
Flat washer
H2
carefully tilt antenna flat.
bolts, lock washers,
and flat washers
Assemble radome to shield with
After feed attachment,
RADOME ATTACHMENT
237267-22
A RE 00Bulletin
Rev Status Model VersionVersion Status Rev
Antenna Shield and Radome
For High-Performance, Parabolic Antenna
7 of 7 page