• Nenhum resultado encontrado

QUICK INSTALLATION GUIDE

N/A
N/A
Protected

Academic year: 2021

Share "QUICK INSTALLATION GUIDE"

Copied!
24
0
0

Texto

(1)

WIRELESS N 150 HOME ROUTER

DIR-610N

QUICK

INSTALLATION

GUIDE

Guía de InstalacIón RápIda

GuIa de Instalação RápIda

(2)

E

N

G

LI

S

H

CONTENTS OF

PACKAGING

WIRELESS N 150 HOME ROUTER

dIR-610n

POWER ADAPTER

5V 1a

ETHERNET CABLE (CAT5 UTP)

connect tHe RouteR to YouR pc duRInG setup

If any of these items are missing from your packaging, contact

your reseller.

(3)

E

N

G

LIS

H

PRODUCT SETUP

ROUTER MODE SETUP

Step 1

position your router close to your modem and the computer that is

already online. place this router in an open area of your intended

work area for better wireless coverage.

Step 4

From the computer you connected to the router, open a web browser.

If you are not automatically directed to the d-link setup Wizard

page, enter

http://dlinkrouter.local. into the address bar. Follow the

onscreen instructions to configure your d-link router. If you wish to

configure your router manually, please click cancel to exit the wizard.

Step 2

unplug the ethernet cable from your modem that is connected to

your computer. plug it into the port labeled Wan on the router.

connect the supplied power adapter into the power port on the back

of the router and then plug into a power outlet or surge protector.

Verify the power light is lit.

Step 3

plug one end of the included ethernet cable into the port labeled

1

on the back of the router. plug the other end of this cable into the

ethernet port on your computer.

WELCOME TO THE D-LINK SETUP WIZARD

Modem Router pc Modem Router pc Modem Router dIR-610n dIR-610n dIR-610n

(4)

E

N

G

LI

S

H

TROUBLESHOOTING

SETUP AND CONFIGURATION PROBLEMS

1. HOW DO I CONFIGURE MY DIR-610N ROUTER MANUALLY?

- connect your pc to the router using an ethernet cable.

- open a web browser and enter the address

http://dlinkrouter.local.

- the default username is ‘admin’. the default password is ‘’ (leave the field blank).

- If you have changed the password and can not remember it, you will need to reset the router to

set the password back to ‘’ (leave the field blank).

2. HOW DO I RESET MY DIR-610N ROUTER TO FACTORY DEFAULT SETTINGS?

- ensure the router is powered on.

- press and hold the reset button at the bottom of the device for 10 seconds.

note: Resetting the router to factory default will erase the current configuration settings. to

re-configure your settings, log into the router as outlined in question 1, then run the setup Wizard.

3. HOW DO I ADD A NEW WIRELESS CLIENT OR PC IF I HAVE FORGOTTEN MY

WIRELESS NETWORK NAME (SSID) OR WIRELESS ENCRYPTION KEY?

- For every pc that needs to connect to the router wirelessly, you will need to ensure you use the

correct Wireless network name (ssId) and encryption key.

- use the web based user interface (as described in question 2 above) to check or choose your

wireless settings.

- Make sure you write down these settings so that you can enter them into each wirelessly

connected pc. You will find a dedicated area on the back of this document to save this important

information for future use.

4. WHY CAN I NOT GET AN INTERNET CONNECTION?

- For cable network users, please log in web based user interface to make sure the Mac clone

address is set up properly in the Internet settings.

- For broadband network users, please log in web based user interface to make sure the user

name and password are correct in the Internet settings.

(5)

E

N

G

LIS

H

TECHNICAL SUPPORT

Australia:

tel: 1300-766-868

24/7 technical support

Web: http://www.dlink.com.au

e-mail: support@dlink.com.au

India:

tel: +91-22-27626600

toll Free 1800-22-8998

Web: www.dlink.co.in

e-Mail: helpdesk@dlink.co.in

Singapore, Thailand, Indonesia,

Malaysia, Philippines, Vietnam:

singapore - www.dlink.com.sg

thailand - www.dlink.co.th

Indonesia - www.dlink.co.id

Malaysia - www.dlink.com.my

philippines - www.dlink.com.ph

Vietnam - www.dlink.com.vn

Korea:

tel : +82-2-2028-1810

Monday to Friday 9:00am to 6:00pm

Web : http://d-link.co.kr

e-mail : g2b@d-link.co.kr

New Zealand:

tel: 0800-900-900

24/7 technical support

Web: http://www.dlink.co.nz

e-mail: support@dlink.co.nz

South Africa and Sub Sahara

D-Link Middle East - Dubai, U.A.E.

plot no. s31102,

Jebel ali Free Zone south,

p.o.Box 18224, dubai, u.a.e.

tel: +971-4-8809022

Fax: +971-4-8809066 / 8809069

technical support: +971-4-8809033

General Inquiries: info.me@dlink-me.com

tech support: support.me@dlink-me.com

Egypt

1, Makram ebeid street - city lights Building

nasrcity - cairo, egypt

Floor 6, office c2

tel.: +2 02 26718375 - +2 02 26717280

technical support: +2 02 26738470

General Inquiries: info.eg@dlink-me.com

tech support: support.eg@dlink-me.com

Kingdom of Saudi Arabia

office # 84 ,

al Khaleej Building ( Mujamathu al-Khaleej)

opp. King Fahd Road, olaya

Riyadh - saudi arabia

tel: +966 1 217 0008

technical support:

+966 1 2170009 / +966 2 6522951

General Inquiries: info.sa@dlink-me.com

tech support: support.sa@dlink-me.com

Pakistan

Islamabad office:

61-a, Jinnah avenue, Blue area,

You can find software updates and user documentation on the d-link website.

(6)

E

N

G

LI

S

H

TECHNICAL SUPPORT

Iran

unit 5, 5th Floor, no. 20, 17th alley , Bokharest

st. , argentine sq. ,

tehran IRan

postal code : 1513833817

tel: +98-21-88880918,19

+98-21-88706653,54

General Inquiries: info.ir@dlink-me.com

tech support: support.ir@dlink-me.com

Morocco

M.I.t.c

Route de nouaceur angle Rs et ct 1029

Bureau n° 312 et 337

casablanca , Maroc

phone : +212 663 72 73 24

email: support.na@dlink-me.com

Lebanon RMA center

dbayeh/lebanon

po Box:901589

tel: +961 4 54 49 71 ext:14

Fax: +961 4 54 49 71 ext:12

email: taoun@dlink-me.com

Bahrain

technical support: +973 1 3332904

Kuwait:

technical support: + 965 22453939 / +965

22453949

Türkiye Merkez

İrtibat Ofisi

ayazağa Maslak yolu

erdebil cevahir İş Merkezi no: 5/a ayazağa /

Maslak İstanbul

tel: +90 212 2895659

Ücretsiz Müşteri destek Hattı: 0 800 211 00 65

Web:www.dlink.com.tr

teknik destek: support.tr@dlink.com.tr

(7)

E

S

PA

Ñ

O

L

CONTENIDO DEL

EMPAQUE

ROUTER HOME WIRELESS N 150

dIR-610n

ADAPTADOR DE ENERGÍA

5V 1a

CABLE ETHERNET (UTP CAT5)

conecta el RouteR a su pc duRante la conFIGuRacIón

si cualquiera de estos artículos no se encuentra en su

empaque, por favor contacte a su vendedor.

(8)

E

S

PA

Ñ

O

L

CONFIGURACIÓN DEL PRODUCTO

CONFIGURACIÓN MODO ROUTER

Paso 1

coloque el router cerca de su módem y el computador que ya

está en línea. coloque el router en una zona abierta de su área de

trabajo para una mejor cobertura inalámbrica.

Paso 4

desde el computador que está conectado al router, abra un

navegador web. si no se dirige automáticamente a la página

asistente de configuración d-link, escriba http://dlinkrouter.local.

en la barra de direcciones. siga las instrucciones en pantalla para

configurar el router d-link. si desea configurar el router de forma

manual, por favor haga clic en cancelar (cancel) para salir del

asistente.

a continuación, será llevado a la página de acceso a través de la

interfaz de usuario del router.

escriba admin como nombre de usuario y deje la contraseña en

blanco para ingresar a la interfaz y configurar el router manualmente.

el manual completo del producto está disponible en el cd incluido o

desde el sitio web de d-link.

Paso 2

desconecte el cable ethernet de su módem que está conectado a

su computador. conéctelo al puerto etiquetado como Wan en el

router.

conecte el adaptador de energía incluido en el puerto de energía

en la parte posterior del router y luego enchufe en una toma de

corriente o protector contra sobrevoltaje. Verifique que el indicador

de energía está encendido.

Paso 3

conecte un extremo del cable ethernet en el puerto etiquetado

como 1 en la parte posterior del router. conecte el otro extremo de

este cable al puerto ethernet en su computador.

WELCOME TO THE D-LINK SETUP WIZARD

Modem Router pc Modem Router pc Modem Router dIR-610n dIR-610n dIR-610n

(9)

E

S

PA

Ñ

O

L

SOLUCIÓN DE PROBLEMAS

PROBLEMAS DE INSTALACIÓN Y CONFIGURACIÓN

1. ¿CÓMO CONFIGURO MI ROUTER DIR-610N MANUALMENTE?

- conecte su pc al router mediante un cable ethernet.

- abra el navegador web e introduzca la dirección http://dlinkrouter.local.

- el nombre de usuario predeterminado es ‘admin’. la contraseña por defecto debe quedar en

blanco (dejar este cuadro vacío).

- si ha cambiado la contraseña y no lo recuerda, tendrá que reiniciar el dispositivo para

establecer la contraseña por defecto.

2. ¿CÓMO PUEDO RESTABLECER MI ROUTER DIR-610N A LOS VALORES POR DEFECTO

DE FÁBRICA?

- asegúrese de que el dispositivo está encendido.

- Mantenga pulsado el botón de reset en la parte posterior del dispositivo durante 20 segundos.

Nota: al restablecer el producto a valores de fábrica, se borrará la configuración actual.

para volver a ajustar la configuración, inicie sesión en el router como se indica en la pregunta 1,

a continuación, ejecute el asistente de configuración.

3. ¿CÓMO PUEDO AÑADIR UN NUEVO CLIENTE INALÁMBRICO O PC SI HE OLVIDADO MI

NOMBRE DE RED INALÁMBRICA (SSID) O CLAVE DE CIFRADO INALÁMBRICO?

- por cada pc que necesita conectar con el router de forma inalámbrica, tendrá que asegurarse

de que utiliza el nombre correcto de la Red Inalámbrica (ssId) y la clave de cifrado.

- utilice la interfaz de usuario basada en web (como se describe en la pregunta 1) para

comprobar o elegir la configuración inalámbrica.

- asegúrese de anotar estos valores para que pueda ingresarlos en cada pc que desee conectar

inalámbricamente. Va a encontrar un espacio especial en la parte posterior de este documento

para escribir esta información importante para el futuro.

4. ¿POR QUÉ NO PUEDO CONSEGUIR UNA CONEXIÓN A INTERNET?

- para usuarios de red por cable, por favor ingrese a la interfaz de usuario para asegurar que la

opción Mac clone address ha sido utilizada correctamente en la configuración a Internet.

- para usuarios adsl, por favor inicie sesión en la interfaz de usuario basada en web para

asegurarse que el nombre de usuario y contraseña están correctos en la configuración de

Internet.

(10)

E

S

PA

Ñ

O

L

SOPORTE TÉCNICO

usted puede encontrar actualizaciones de softwares o firmwares y documentación para usuarios a

través de nuestro sitio www.dlinkla.com

SOPORTE TÉCNICO PARA USUARIOS EN LATINO AMERICA

soporte técnico a través de los siguientes teléfonos de d-link

PAIS

NUMERO

Argentina

0800 - 12235465

Chile

800 260200

Colombia

01800 - 510070

Costa Rica

0800 - 0521478

Ecuador

1800 - 035465

El Salvador

800 - 6335

Guatemala

1800 - 8350255

México

01800 - 0626270

Panamá

011 008000525465

Perú

0800 - 00968

Venezuela

0800 - 1005767

Soporte Técnico de D-Link a través de Internet

Horario de atención soporte técnico en www.dlinkla.com

e-mail: soporte@dlinkla.com & consultas@dlinkla.com

(11)

P

O

R

TU

G

U

Ê

S

CONTEÚDO DA

EMBALAGEM

ROTEADOR WIRELESS N 150

dIR-610n

FONTE DE ENERGIA

5V 1a

CABO DE REDE (CAT5 UTP)

conecte o RoteadoR ao coMputadoR, paRa eFetuaR

a conFIGuRação

se algum dos itens não estiver dentro da embalagem, contate

seu revendedor.

(12)

P

O

R

TU

G

U

Ê

S

CONFIGURAÇÃO DO PRODUTO

CONFIGURAÇÃO DO ROTEADOR

Primeiro Passo

posicione seu roteador, próximo ao modem e ao computador

que será utilizado para configuração. de preferência, posicione

o roteador em uma área com poucas barreiras (como paredes e

janelas), para obter melhor qualidade do sinal wireless.

Quarto Passo

no computador que está conectado ao roteador, abra um navegador

web. Você deverá ser direcionado automaticamente à página do

assistente de configuração d-link, caso não isso não ocorra, acesse

http://dlinkrouter.local. na barra de endereços. em seguida, siga as

instruções na tela para configurar o roteador d-link. se você deseja

configurar seu roteador manualmente, clique em cancelar para sair

do assistente.

Você será encaminhado à página de login do usuário no roteador.

digite admin como nome de usuário e deixe a senha em branco para

entrar na interface e configurar o roteador manualmente.

o manual completo do produto, está disponível no site da d-link.

Segundo Passo

desconecte a ponta do cabo ethernet do seu modem, que está

conectado ao computador. em seguida, conecte-o a porta Wan do

roteador.

conecte a fonte de energia à porta de alimentação, na parte de

trás do roteador e depois conecte a uma tomada ou estabilizador.

Verifique se a luz de energia está acesa.

Terceiro Passo

conecte uma extremidade do cabo ethernet, (incluído na caixa) na

porta 1 atrás do roteador. conecte a outra extremidade deste cabo

à porta ethernet do seu computador ou notebook.

WELCOME TO THE D-LINK SETUP WIZARD

Modem Router pc Modem Router pc Modem Router dIR-610n dIR-610n dIR-610n

(13)

P

O

R

TU

G

U

Ê

S

RESOLUÇÃO DE PROBLEMAS

PROBLEMAS DE INSTALAÇÃO E CONFIGURAÇÃO

1. COMO CONFIGURAR MANUALMENTE MEU ROUTER DIR-610N?

- ligue o Roteador ao pc/notebook utilizando um cabo ethernet.

- abra um navegador web e digite o endereço http://dlinkrouter.local.

- o nome de usuário padrão é 'admin'. a senha padrão é'' (deixe o campo em branco).

- caso tenha alterado a senha e não se lembra, reset o roteador para configurar a senha

novamente e deixe o campo “senha” (em branco).

2. Como faço para redefinir meu Roteador DIR-610N, para as configurações de fábrica?

- Verifique se o roteador está ligado.

- pressione e segure o botão reset na parte inferior do dispositivo por 10 segundos.

Nota: Reiniciar o roteador para o padrão de fábrica vai apagar as configurações atuais.para

voltar a configurar o roteador, faça login no roteador conforme descrito na pergunta 1 e então

execute o assistente de configuração.

3. Como faço para adicionar um novo dispositivo Wireless ou um PC a minha rede, se

esqueci o Nome da Rede wireless (SSID) ou a Chave de Criptografia Wireless?

- para conectar um pc ou dispositivo Wireless a rede, tenha certeza do nome e da chave de

criptografia correta.

- utilize a interface de usuário baseada na web, (como descrito na pergunta 2 acima) para

escolher suas configurações sem fio.

- coloque o usuário e senha em cada pc que você deseja conectar a rede, caso queira, salve

as informações para utilizar em conexões futuras.

4. Porque não consigo estabelcer uma conexão com a INTERNET?

- para os usuários da rede por cabo, faça o login na interface de usuário baseada na web, para

verificar se o endereço clone Mac está configurado corretamente, nas configurações de

Internet.

- para os usuários da rede de banda larga, faça o login na interface de usuário baseada na web

para verificar se o nome de usuário e senha estão corretos, nas configurações de Internet.

(14)

P

O

R

TU

G

U

Ê

S

SUPORTE TÉCNICO

caso tenha dúvidas na instalação do produto, entre em contato com o suporte técnico d-link.

acesse o site:

www.dlink.com.br/suporte

(15)

COUNTRIES IN WHICH D-LINK LIMITED

WARRANTY APPLIES

LIMITED HARDWARE WARRANTY

WARRANTY &

SAFETY INFORMATION

LIMITED PRODUCT WARRANTY

For better service, please register your product

online at http://register.dlink.com

d-link provides limited Warranty for its product only to the person or entity that originally purchased the product from d-link or its authorized reseller or distributor. d-link will fulfill the warranty obligations according to the local warranty policy of the country where you purchased your d-link product.

the warranty period starts on the date of purchase from d-link or its authorized reseller or distributor. You may be required to provide a proof of purchase as a condition of receiving a warranty service. Your sales or delivery receipt, showing the date of purchase of the product, is your proof of purchase. You are entitled to warranty service if required within the warranty period under the terms and conditions of this document. Warranty period table

the warranty periods stated in this table supersede and replace the warranty periods stated in the user’s manuals for relevant products. the limited Warranty terms herein apply to countries in asia, oceania, latin america and africa, with exception to following countries,

a. For estonia, latvia, lithuania, Israel and turkey, the general warranty period shall be two (2) years.

b. For Russia, ukraine, Belarus, Kazakhstan, uzbekistan, armenia, azerbaijan, Moldova, turkmenistan, tajikistan and Kyrgyzstan, please refer to the last pages of this hardcopy warranty booklet in Russian.

c. For Mongolia, please refer to the detail warranty in english at www.dlink.ru/mn. d. For the countries above, the limited lifetime Warranty information of dFl

series firewalls, managed and smart switches can be seen at www.dlink.ru. For a detailed country list, please see d-link website http://warranty.dlink. com. For the countries not on the list, please refer to local d-link websites.

Product Type

Warranty

Period

Unmanaged Switch: des-1008F/1008p/1016d/1018dG/1024d, des-1026G/1048/1050G, dGs-1016d/1024d Limited Lifetime Warranty a. the listed products are covered under warranty for five (5) years after the product is discontinued. b. Internal fans and internal power supplies are included. c. external power supplies are excluded. d. limited lifetime Warranty covers the listed products purchased on or after Oct. 1, 2009.

e. please register your d-link product online at http:// register.dlink.com within thirty (30) days of purchase. EasySmart Switch: des-1100 series

Web Smart Switch:

des-1200/1210 series, dGs-1200/1210 series

Entry-Level Managed Switch:

des-3000 series, dGs-3100 series, des-3028/3028p/3052/3052p

X-STACK™ Managed Switch:

dGs-3200/3400/3420/3600/3620 series, des-3500/3528/3552/3800/3810 series, des-3200-10/16/26/28

Unified Wired/Wireless Switch:

dWs-3000/4000 series

Switch Expansion Module:

deM-201F/201Fl/301G/301t/410X/410cX Unified Wireless AP dWl-3500ap/8500ap/8600ap AirPremier Wireless AP dWl-2100ap/2200ap/3140ap/3200ap/270 0ap, dWl-3260ap/7100ap/8200ap/7700ap, dap-3220 AirPremier N Wireless AP dap-1353/2553/2590/2690/3520/3690

NetDefend IPS Firewall

dFl-210/800/1600/2500

NetDefend UTM Firewall

dFl-160/260/260e/860/860e/1660/2560/2560G

VPN Firewall

dsR-1000n, dsR-500n

Chassis Based Switch

des-7200/6500 series two (2) years*

Software, spare parts and spare kits ninety (90) days*

All other products

(including, but not limited to, d-link

consumer-class products) one (1) year*

IMPORTANT:

*some countries may have special warranty periods longer than stated above. please check local d-link websites.

(16)

PAÍSES NOS QUAIS A GARANTIA LIMITADA DA

D-LINK SE APLICA

GARANTIA LIMITADA

LIMITED SOFTWARE WARRANTY

WHAT YOU MUST DO FOR WARRANTY SERVICE

WHAT IS NOT COVERED

DISCLAIMER

LIMITATION OF LIABILITY

GOVERNING LAW

INFORMAÇÕES DE GARANTIA

d-link warrants that the software portion of the product (software) will substantially conform to its then current functional specifications from the date of original delivery for a period of ninety (90) days, if properly installed and operated on approved hardware. d-link’s sole obligation shall be to replace the non-conforming software. the replacement software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by d-link. the warranty period shall extend for an additional ninety (90) days after any replacement software is delivered. If a material non-conformance is incapable of correction, or if d-link determines in its sole discretion that it is not practical to replace the non-conforming software, the price paid by the original licensee will be refunded, provided that the non-conforming software (and all copies thereof) is first returned to d-link. the license granted respecting any software for which a refund is given automatically terminates.

any claim under this limited warranty must be submitted in writing before the end of the warranty period to a service office with a written description of the Hardware defect or software nonconformance in sufficient detail to allow d-link to confirm the same. the original product owner must obtain a Return Material authorization (RMa) number from the service office and, if requested, provide written proof of purchase. after an RMa number is issued, the defective product must be packaged securely in the original or other suitable shipping package to avoid damage in transit with RMa number prominently marked outside the package. the packaged product shall be insured and shipped to a service office with shipping costs prepaid. d-link may reject or return any product not packaged and shipped in strict compliance with foregoing requirements, or for which an RMa number not visible outside the package. the product owner agrees to pay reasonable handling and return shipping charges for product not packaged and shipped in accordance with foregoing requirements, or that determined by d-link not to be defective or non-conforming.

the limited warranty provided by d-link does not cover:

products that have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or removed; damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; and any hardware, software, firmware or other products or services provided by anyone other than d-link or any service office.

eXcept FoR tHe lIMIted WaRRantY specIFIed HeReIn, tHe pRoduct Is pRoVIded “as-Is” WItHout anY WaRRantY oF anY KInd IncludInG, WItHout lIMItatIon, anY WaRRantY oF MeRcHantaBIlItY, FItness FoR a paRtIculaR puRpose and non-InFRInGeMent.

to tHe MaXIMuM eXtent peRMItted BY laW, d-lInK Is not lIaBle undeR anY contRact, neGlIGence, stRIct lIaBIlItY oR otHeR leGal oR eQuItaBle tHeoRY FoR anY loss oF use oF tHe pRoduct, InconVenIence oR daMaGes oF anY cHaRacteR, WHetHeR dIRect, specIal, IncIdental oR conseQuentIal (IncludInG, But not lIMIted to, daMaGes FoR loss oF GoodWIll, WoRK stoppaGe, coMputeR FaIluRe oR MalFunctIon, loss oF InFoRMatIon oR data contaIned In, stoRed on, oR InteGRated WItH anY pRoduct RetuRned to d-lInK FoR WaRRantY seRVIce) ResultInG FRoM tHe use oF tHe pRoduct, RelatInG to WaRRantY seRVIce, oR aRIsInG out oF anY BReacH oF tHIs lIMIted WaRRantY, eVen IF adVIsed oF tHe possIBIlItY oF sucH daMaGes. tHe sole ReMedY FoR a BReacH oF tHe FoReGoInG lIMIted WaRRantY Is RepaIR, ReplaceMent oR ReFund oF tHe deFectIVe oR non-conFoRMInG pRoduct.

the limited Warranty herein shall be governed by the laws of the Republic of singapore.

TRADEMARKS

d-link® is a registered trademark of d-link corporation/d-link International. all other trademarks belong to their respective proprietors.

COPYRIGHT STATEMENT

no part of this publication may be reproduced in any form or by any means or used

para ter direito a GaRantIa , favor registrar os

seus produtos no portal

http://register.dlink.com

os termos de Garantia limitada dessa documentação aplicam-se a maioria dos países na ásia, oceania, américa latina e áfrica. para a lista de países detalhada, favor consultar o website da d-link. http://warranty.dlink.com. para

países não incluídos na lista, favor consultar o website local da d-link.

a d-link oferece esta Garantia limitada para o seu produto apenas à pessoa ou entidade que originalmente adquiriu o produto da d-link ou de um revendedor/ distribuidor autorizado. a d-link irá cumprir suas obrigações de garantia de acordo com a política de garantia local, do país no qual você adquiriu os nossos produtos. o período de garantia começa a partir da data da compra da d-link ou de um revendedor/distribuidor autorizado, devidamente comprovado através da nota Fiscal de Venda ou cupom Fiscal.

pode ser solicitado que você forneça a prova da compra como uma condição para prestação de serviço de garantia. Você tem direito ao serviço de garantia de acordo com os termos e condições deste documento, caso requerido dentro do período de garantia.

tabela de período de Garantia

o período de garantia demonstrado nessa tabela tem precedência e substitui o período de garantia conforme definido no manual do usuário para produtos relevantes.

Tipo de Produto

Período de

Garantia

Unmanaged Switch: des-1008F/1008p/1016d/1018dG/1024d, des-1026G/1048/1050G, dGs-1016d/1024d Garantia Vitalícia Limitada

a. Isso significa que a garantia só vai acabar 5 (cinco) anos após a descontinuidade do produto. b. Ventoinhas internas e fontes de alimentação internas são incluídos. c. Fontes de alimentação externas são excluídas. d. a Garantia Vitalícia limitada aplica-se aos produtos à esquerda adquiridos após 1º. de outubro de 2.009. e. para que a Garantia Vitálicia limitada tenha validade, o produto dever ser registrado no portal de registro de produtos da d-link http://register.dlink.com em até 30 (trinta) dias corridos após a compra. f. caso o produto não seja registrado no portal acima, o cliente terá direito somente da garantia padrão oferecida pela d-link.

EasySmart Switch:

série des-1100

Web Smart Switch:

série des-1200/1210, série dGs-1200/1210

Entry-Level Managed Switch:

série des-3000, série dGs-3100, des-3028/3028p/3052/3052p

X-STACK™ Managed Switch:

série dGs-3200/3400/3600, série des-3500/3528/3552/3800/3810, des-3200-26, des-3200-28

Unified Wired/Wireless Switch:

série dWs-3000/4000

Switch Expansion Module:

deM-201F/201Fl/301G/301t/410X/410cX Unified Wireless AP dWl-3500ap/8500ap/8600ap AirPremier Wireless AP dWl-2100ap/2200ap/3140 ap/3200ap/2700ap, dWl-3260ap/7100ap/8200ap/7700ap, dap-3220 AirPremier N Wireless AP dap-1353/2553/2590/2690/3520/3690

NetDefend IPS Firewall

dFl-210/800/1600/2500

NetDefend UTM Firewall

(17)

INFORMAÇÕES DE GARANTIA

para ter direito a GaRantIa , favor registrar os

seus produtos no portal

http://register.dlink.com

os termos de Garantia limitada dessa documentação aplicam-se a maioria dos países na ásia, oceania, américa latina e áfrica. para a lista de países detalhada, favor consultar o website da d-link. http://warranty.dlink.com. para

países não incluídos na lista, favor consultar o website local da d-link.

a d-link oferece esta Garantia limitada para o seu produto apenas à pessoa ou entidade que originalmente adquiriu o produto da d-link ou de um revendedor/ distribuidor autorizado. a d-link irá cumprir suas obrigações de garantia de acordo com a política de garantia local, do país no qual você adquiriu os nossos produtos. o período de garantia começa a partir da data da compra da d-link ou de um revendedor/distribuidor autorizado, devidamente comprovado através da nota Fiscal de Venda ou cupom Fiscal.

pode ser solicitado que você forneça a prova da compra como uma condição para prestação de serviço de garantia. Você tem direito ao serviço de garantia de acordo com os termos e condições deste documento, caso requerido dentro do período de garantia.

tabela de período de Garantia

o período de garantia demonstrado nessa tabela tem precedência e substitui o período de garantia conforme definido no manual do usuário para produtos relevantes.

Tipo de Produto

Período de

Garantia

Unmanaged Switch: des-1008F/1008p/1016d/1018dG/1024d, des-1026G/1048/1050G, dGs-1016d/1024d Garantia Vitalícia Limitada

a. Isso significa que a garantia só vai acabar 5 (cinco) anos após a descontinuidade do produto. b. Ventoinhas internas e fontes de alimentação internas são incluídos. c. Fontes de alimentação externas são excluídas. d. a Garantia Vitalícia limitada aplica-se aos produtos à esquerda adquiridos após 1º. de outubro de 2.009. e. para que a Garantia Vitálicia limitada tenha

EasySmart Switch:

série des-1100

Web Smart Switch:

série des-1200/1210, série dGs-1200/1210

Entry-Level Managed Switch:

série des-3000, série dGs-3100, des-3028/3028p/3052/3052p

X-STACK™ Managed Switch:

série dGs-3200/3400/3600, série des-3500/3528/3552/3800/3810, des-3200-26, des-3200-28

Unified Wired/Wireless Switch:

série dWs-3000/4000

Switch Expansion Module:

GARANTIA DE HARDWARE LIMITADA

GARANTIA LIMITADA DO SOFTWARE

O QUE NÃO ESTÁ COBERTO

AVISO DE ISENÇÃO DE RESPONSABILIDADE

O QUE VOCÊ DEVE FAZER PARA O SERVIÇO

DE GARANTIA

a única obrigação da d-link será reparar ou substituir o Hardware defeituoso (ou qualquer parte do mesmo) . esse reparo ou substituição será executado em uma assistência técnica autorizada da d-link. a d-link poderá, a seu critério, substituir o Hardware defeituoso por qualquer produto que a d-link considere equivalente ou superior em todos os aspectos materiais ao Hardware defeituoso. o período da Garantia será prorrogado por mais noventa (90) dias após o Hardware reparado ou substituído for entregue. se um defeito material for incapaz de ser corrigido, ou se a d-link determinar, segundo seu próprio critério, que não será prático reparar ou substituir o Hardware defeituoso, o valor pago pelo comprador original será restituído com a devolução à d-link do Hardware defeituoso. todo Hardware tornar-se-á propriedade da d-link após a substituição ou reembolso.

IMPORTANTE:

Os códidos e tipo de produtos listados acima, estão sujeitos a alteração sem prévio aviso. Favor consultar http://warranty.dlink.com para ter acesso as informações atualizadas.

*alguns países oferecem períodos de garantia diferentes das informadas acima. Favor consultar o período de garantia correto do seu produto na página http://suporte.dlink.com.br/suporte/listadeprodutos/

a d-link garante que a parte de software deste produto ("software") será substancialmente compatível com as suas especificações atuais de funcionamento da data da entrega original por um período de noventa (90) dias, desde que adequadamente instalado e operado em hardware aprovado. a única obrigação da d-link será substituir o software não conforme. o software substituto será fornecido somente ao licenciado original e estará sujeito aos termos e condições da licença concedida pela d-link. o período da garantia será prorrogado por mais noventa (90) dias após qualquer software substituto ser entregue. se uma não conformidade de material for incapaz de ser corrigida, ou se a d-link determinar, segundo seu próprio critério, que não é possível substituir o software não conforme, o preço pago pelo licenciado original será restituído pela d-link, desde que o software não conforme (e todas as suas cópias) sejam primeiramente devolvidos para a d-link. a licença concedida em relação a qualquer software para o qual o reembolso for feito terminará automaticamente.

a garantia limitada fornecida pela d-link não cobre:

produtos, que no julgamento da d-link tenham sido sujeitos a abusos, acidentes, alteração, modificação, adulteração, negligência, uso indevido, instalação defeituosa, falta de cuidado, qualquer conserto ou serviço que não esteja contemplado na documentação do produto, ou se o modelo ou número de série tiver sido alterado, adulterado, apagado ou removido; danos que ocorram no transporte, sejam por força maior, falhas devidas a falta de energia, e danos aparentes; e qualquer hardware, software, firmware ou outros produtos ou serviços fornecidos por qualquer outro que não a d-link ou qualquer escritório de serviços.

eXceto pela GaRantIa lIMItada aQuI especIFIcada, o pRoduto É FoRnecIdo "no estado eM Que se encontRa" seM uMa GaRantIa de QualQueR tIpo seJa Qual FoR, IncluIndo, seM lIMItaçÕes, QualQueR GaRantIa MeRcantIl, de adeQuação a uM pRopósIto paRtIculaR e não InFRação.

Tipo de Produto

Período de

Garantia

Chassis Based Switch

série des-7200/6500 dois (2) anos*

Softwares, peças de reposição e kits

sobressalentes noventa (90) dias* Demais produtos

incluindo mas não limitado aos produtos destinados a uso doméstico ou para pequenas e médias empresas.

um (1) ano*

LIMITAÇÃO DE RESPONSABILIDADE

atÉ a eXtensão MáXIMa peRMItIda pela leI, a d-lInK não É ResponsáVel soB nenHuM contRato, neGlIGÊncIa, estRIta ResponsaBIlIdade ou outRa teoRIa leGal ou eQuIValente poR QualQueR peRda pelo uso do pRoduto, InconVenIentes ou danos de QualQueR tIpo, seJaM dIRetos, especIaIs, acIdentaIs ou conseQuÊncIaIs (IncluIndo, Mas não lIMItados a, danos poR peRdas de clIentes, peRda de ReceIta ou lucRos, InteRRupção de tRaBalHos, aVaRIas de coMputadoRes ou Mau FuncIonaMento, aVaRIas eM outRos eQuIpaMentos ou pRoGRaMas de coMputadoRes aos QuaIs o pRoduto da d-lInK esta conectado, peRda de InFoRMaçÕes ou dados contIdos ou aRMaZenados ou InteGRados a QualQueR pRoduto Que tenHa sIdo deVolVIdo a d-lInK paRa seRVIço de GaRantIa) Resultantes do uso deste pRoduto, RelacIonado coM a GaRantIa de seRVIço, ou Que se apResente atRaVÉs de uMa QueBRa desta GaRantIa lIMItada, MesMo Que a d-lInK tenHa sIdo aVIsada da possIBIlIdade deste pReJuíZo. a ÚnIca alteRnatIVa paRa uMa QueBRa desta GaRantIa É o conseRto, suBstItuIção ou deVolução do pRoduto deFeItuoso ou não-conFoRMe.

LEI REGENTE

Esta Garantia Limitada será regulada pelas leis do país onde o produto foi adquirido.

Marca registrada

d-link® é uma marca comercial registrada da d-link corporation/ d-link International. todas as demais marcas registradas pertencem

(18)

SAFETY INSTRUCTIONS

please adhere to the following safety guidelines to help ensure your own personal safety and protect your system from potential damage. any acts taken that are inconsistent with ordinary use of the product, including improper testing, etc., and those not expressly approved by d-link may result in the loss of product warranty.

unless expressly approved by an authorized representative of d-link in writing, you may not and may not permit others to:

• disassemble or reverse engineer the device or attempt to derive source code (underlying ideas,

Гарантийные обязательства

1. Производитель гарантирует отсутствие производственных дефектов и неисправностей Оборудования и несет ответственность по гарантийным обязательствам в соответствии с законодательством Российской Федерации. 2. Гарантийный период 2 года установлен на все устройства продуктовой линейки d-link поставляемые в Эстонию, Латвию, Литву, Израиль и Турцию 3. Гарантийные период 1 год установлен на все устройства продуктовой линейки d-link поставляемые в Россию, Украину, Беларусь, Казахстан, Узбекистан, Армению, Азербайджан, Молдову, Туркменистан, Таджикистан, Киргизстан и Монголию. 4. Файрволы серии dFl, управляемые коммутаторы и коммутаторы серии sMaRt изготовленные не ранее 2007 года попадают под действие ограниченной пожизненной гарантии в соответствии с информацией на сайте www.dlink.ru для стран Россия, Украина, Беларусь, Казахстан, Узбекистан, Армения, Азербайджан, Молдова, Туркменистан, Таджикистан, Киргизстан, Эстония, Латвия, Литва, Монголия, Израиль и Турция 5. Гарантийный период исчисляется c момента приобретения устройства у официального дилера на территории России и стран СНГ и составляет: 2.1. для всех устройств, блоков питания и вентиляторов охлаждения - один год; 2.2. для Вoot RoM, сплиттеров, фильтров, кабелей и прочих комплектующих - 90 дней. Вне зависимости от даты продажи гарантийный срок не может превышать 2 года с даты производства изделия, которая определяется по 6 ( год ) и 7 ( месяц ) цифрам серийного номера. 6. В течение гарантийного срока Производитель обязуется бесплатно устранить дефекты Оборудования путем его ремонта или замены на аналогичное при условии, что дефект возник по вине Производителя. Устройство, предоставляемое для замены, может быть как новым, так и восстановленным, но в любом случае Производитель гарантирует, что его характеристики будут не хуже, чем у заменяемого устройства. 7. Выполнение Производителем гарантийных обязательств по ремонту вышедшего из строя оборудования влечет за собой увеличение гарантийного срока на время ремонта оборудования. 8. Если срок гарантии истекает ранее чем через месяц после ремонта устройства, то на него устанавливается дополнительная гарантия сроком на 30 дней с момента окончания ремонта.

Гарантийный талон

NO. ______________

Внимание! Пожалуйста, потребуйте от продавца полностью заполнить гарантийный талон, проверьте правильность

указанного серийного номера и модели изделия.

ИЗДЕЛИЕ

:

МОДЕЛЬ

:

СЕРИЙНЫЙ НОМЕР:

ДАТА ПРОДАЖИ:

Гарантийный срок - один год с даты приобретения, но не более 2-х лет с даты изготовления

ФИРМА-ПРОДАВЕЦ:

АДРЕС И ТЕЛЕФОН ФИРМЫ-ПРОДАВЦА:

Исправное изделие в полном комплекте

получил, с условиями гарантии, правилами

и условиями эксплуатации ознакомлен и

согласен

ПОДПИСЬ ПОКУПАТЕЛЯ:

ДАТА ЗАПОЛНЕНИЯ:

МЕСТО ПЕЧАТИ 9. Производитель не несет ответственности за совместимость своего Программного Обеспечения с любыми аппаратными или программными средствами, поставляемыми другими производителями, если иное не оговорено в прилагаемой Документации. 10. Ни при каких обстоятельствах Производитель не несет ответственности за любые убытки, включая потерю данных, потерю прибыли и другие случайные, последовательные или косвенные убытки, возникшие вследствие некорректных действий по инсталляции, сопровождению, эксплуатации либо связанных с производительностью, выходом из строя или временной неработоспособностью Оборудования. 11. Производитель не несет ответственности по гарантии в случае, если произведенные им тестирование и/или анализ показали, что заявленный дефект в изделии отсутствует, либо он возник вследствие нарушения правил инсталляции или условий эксплуатации, а также любых действий, связанных с попытками добиться от устройства выполнения функций, не заявленных Производителем. 12. Условия гарантии не предусматривают чистку и профилактику оборудования силами и за счет Производителя. 13. Производитель не несет ответственности за дефекты и неисправности Оборудования, возникшие в результате: o несоблюдения правил транспортировки и условий хранения, технических требований по размещению и эксплуатации; o неправильных действий, использования Оборудования не по назначению, несоблюдения инструкций по эксплуатации; o механических воздействий; (Оборудование с явными механическими повреждениями, трещинами, сколами на корпусе и внутри устройства, сломанными антеннами и контактами разъемов).; o действия обстоятельств непреодолимой силы (таких как пожар, наводнение, землетрясение и др. или влияния случайных внешних факторов , как броски напряжения в электрической сети и пр.)

©2006 d-link systems, Inc. Все права защищены. Торговые марки или зарегистрированные торговые марки являются собственностью их владельцев. Программное обеспечение и спецификации могут изменяться без уведомления.

to reduce the risk of bodily injury, electrical shock, fire, and damage to the device and other equipment, observe the following precautions:

Power Sources

• observe and follow service markings.

• do not push any objects into the openings of your device unless consistent with the authorized operation of the device. doing so can cause a fire or an electrical shock by shorting out interior components.

• the powering of this device must adhere to the power specifications indicated for this product. • do not overload wall outlets and/or extension cords as this will increase the risk of fire or electrical

shock.

PROTECTING AGAINST

ELECTROSTATIC DISCHARGE

static electricity can harm delicate components inside your system. to prevent static damage, discharge static electricity from your body before you touch any of the electronic components, such as the microprocessor. You can do so by periodically touching an unpainted metal surface on the chassis.

You can also take the following steps to help prevent damage from electrostatic discharge (esd): 1. When unpacking a static-sensitive component from its shipping carton, do not remove the

component from the antistatic packing material until you are ready to install the component in your system. Just before unwrapping the antistatic packaging, be sure to discharge static electricity from your body.

2. When transporting a sensitive component, first place it in an antistatic container or packaging. 3. Handle all sensitive components in a static-safe area. If possible, use antistatic floor pads,

workbench pads, and an antistatic grounding strap.

• operate the device only from the type of external power source indicated on the electrical ratings label. • to help avoid damaging your device, be sure the voltage selection switch (if provided) on the power

supply is set to match the power available at your location.

• also be sure that attached devices are electrically rated to operate with the power available in your location. • use only approved power cable(s). If you have not been provided a power cable for your device or for

any ac-powered option intended for your device, purchase a power cable that is approved for use in your country and is suitable for use with your device. the power cable must be rated for the device and for the voltage and current marked on the device’s electrical ratings label. the voltage and current rating of the cable should be greater than the ratings marked on the device.

• to help prevent an electrical shock, plug the device and peripheral power cables into properly grounded electrical outlets. these cables are equipped with three-prong plugs to help ensure proper grounding. do not use adapter plugs or remove the grounding prong from a cable. If you must use an extension cable, use a 3-wire cable with properly grounded plugs.

• observe extension cable and power strip ratings. ensure that the total ampere rating of all products plugged into the extension cable or power strip does not exceed 80 percent of the ampere ratings limit for the extension cable or power strip.

• to help protect your device from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or uninterruptible power supply (ups).

• do not modify power cables or plugs. consult a licensed electrician or your power company for site modifications. always follow your local/national wiring rules.

• When connecting or disconnecting power to hot-pluggable power supplies, if offered with your device, observe the following guidelines:

• Install the power supply before connecting the power cable to the power supply. • unplug the power cable before removing the power supply.

• If the system has multiple sources of power, disconnect power from the device by unplugging all power cables from the power supplies.

Servicing/Disassembling

• do not service any product except as expressly set forth in your system documentation. • opening or removing covers that are marked with the triangular symbol with a lightning bolt may expose

you to an electrical shock. only a trained service technician should service components inside these compartments.

• to reduce the risk of electrical shock, never disassemble this device. none of its internal parts are user-replaceable; therefore, there is no reason to access the interior.

• do not spill food or liquids on your system components, and never operate the device in a wet environment. If the device gets wet, see the appropriate section in your troubleshooting guide or contact your trained service provider.

• use the device only with approved equipment.

• Move products with care; ensure that all casters and/or stabilizers are firmly connected to the system. avoid sudden stops and uneven surfaces.

Environment

• do not use this device near water (e.g. near a bathtub, sink, laundry tub, fish tank, in a wet basement or near a swimming pool).

• do not use this device in areas with high humidity. • this device must not be subjected to water or condensation. • Keep your device away from radiators and heat sources. also, do not block cooling vents.

Cleaning

• always unplug the power before cleaning this device.

• do not use liquid or aerosol cleaners of any kind. use only compressed air that is recommended for electronic devices.

• use a dry cloth for cleaning.

Federal Communication Commission Interference Statement

this equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the Fcc Rules. these limits are designed to provide reasonable protection against harmful interference in a residential installation. this equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- consult the dealer or an experienced radio/tV technician for help.

FCC Caution: any changes or modifications not expressly approved by the party responsible

FCC WARNING

(19)

NO. ______________

PROTECTING AGAINST

ELECTROSTATIC DISCHARGE

static electricity can harm delicate components inside your system. to prevent static damage, discharge static electricity from your body before you touch any of the electronic components, such as the microprocessor. You can do so by periodically touching an unpainted metal surface on the chassis.

You can also take the following steps to help prevent damage from electrostatic discharge (esd): 1. When unpacking a static-sensitive component from its shipping carton, do not remove the

component from the antistatic packing material until you are ready to install the component in your system. Just before unwrapping the antistatic packaging, be sure to discharge static electricity from your body.

2. When transporting a sensitive component, first place it in an antistatic container or packaging. 3. Handle all sensitive components in a static-safe area. If possible, use antistatic floor pads,

workbench pads, and an antistatic grounding strap.

• operate the device only from the type of external power source indicated on the electrical ratings label. • to help avoid damaging your device, be sure the voltage selection switch (if provided) on the power

supply is set to match the power available at your location.

• also be sure that attached devices are electrically rated to operate with the power available in your location. • use only approved power cable(s). If you have not been provided a power cable for your device or for

any ac-powered option intended for your device, purchase a power cable that is approved for use in your country and is suitable for use with your device. the power cable must be rated for the device and for the voltage and current marked on the device’s electrical ratings label. the voltage and current rating of the cable should be greater than the ratings marked on the device.

• to help prevent an electrical shock, plug the device and peripheral power cables into properly grounded electrical outlets. these cables are equipped with three-prong plugs to help ensure proper grounding. do not use adapter plugs or remove the grounding prong from a cable. If you must use an extension cable, use a 3-wire cable with properly grounded plugs.

• observe extension cable and power strip ratings. ensure that the total ampere rating of all products plugged into the extension cable or power strip does not exceed 80 percent of the ampere ratings limit for the extension cable or power strip.

• to help protect your device from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or uninterruptible power supply (ups).

• do not modify power cables or plugs. consult a licensed electrician or your power company for site modifications. always follow your local/national wiring rules.

• When connecting or disconnecting power to hot-pluggable power supplies, if offered with your device, observe the following guidelines:

• Install the power supply before connecting the power cable to the power supply. • unplug the power cable before removing the power supply.

• If the system has multiple sources of power, disconnect power from the device by unplugging all power cables from the power supplies.

Servicing/Disassembling

• do not service any product except as expressly set forth in your system documentation. • opening or removing covers that are marked with the triangular symbol with a lightning bolt may expose

you to an electrical shock. only a trained service technician should service components inside these compartments.

• to reduce the risk of electrical shock, never disassemble this device. none of its internal parts are user-replaceable; therefore, there is no reason to access the interior.

• do not spill food or liquids on your system components, and never operate the device in a wet environment. If the device gets wet, see the appropriate section in your troubleshooting guide or contact your trained service provider.

• use the device only with approved equipment.

• Move products with care; ensure that all casters and/or stabilizers are firmly connected to the system. avoid sudden stops and uneven surfaces.

Environment

• do not use this device near water (e.g. near a bathtub, sink, laundry tub, fish tank, in a wet basement or near a swimming pool).

• do not use this device in areas with high humidity. • this device must not be subjected to water or condensation. • Keep your device away from radiators and heat sources. also, do not block cooling vents.

Cleaning

• always unplug the power before cleaning this device.

• do not use liquid or aerosol cleaners of any kind. use only compressed air that is recommended for electronic devices.

• use a dry cloth for cleaning.

FCC WARNING

NOTICE OF WIRELESS RADIO LAN USAGE IN THE EUROPEAN

COMMUNITY (ONLY FOR WIRELESS PRODUCT)

• at the time of writing this addendum, some countries such as Italy, Greece, portugal and spain hasn’t allowed operation of radio devices in the 5Ghz bands, although operation of 2.4Ghz radio devices are allowed. please check with your local authority to confirm. • this device is restricted to indoor use when operated in the european community using

channels in the 5.15-5.35 GHz band to reduce the potential for interference. • this device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all

eu member states and eFta countries, except in France where restrictive use applies. this device may not be used for setting up outdoor radio links in France and in some areas

the RF output power may be limited to 10 mW eIRp in the frequency range of 2454 – 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France.

this equipment may be operated in al, ad, Be, BG, dK, de, FI, FR, GR, GW, Is, It, HR, lI, lu, Mt, MK, Md, Mc, nl, no, at, ol, pt, Ro, sM, se, Rs, sK, es, cI, Hu, cY

Usage Notes:

• to remain in conformance with european national spectrum usage regulations, frequency and channel limitations will be applied on the products according to the country where the equipment will be deployed.

• this device is restricted from functioning in ad-hoc mode while operating in 5Ghz. ad-hoc mode is direct peer-to-peer communication between two client devices without an access point. • access points will support dFs (dynamic Frequency selection) and tpc (transmit power

control) functionality as required when operating in 5Ghz within the eu.

5GHz wireless frequency and channel operation in EEC countries

allowable 802.11a Frequencies and channels countries 5.15-5.25 GHz (channels 36, 40, 44, 48) liechtenstein, 5.15-5.25 Ghz & 5.725-5.875 Ghz (channels 36, 40, 44, 48, 149, 153, 157, 161, 165, 169) austria 5.15-5.35 GHz (channels 36, 40, 44, 48, 52, 56, 60, 64) France 5.15-5.35 & 5.47-5.725 GHz (channels 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140)

denmark, Germany, Iceland, Finland, netherlands, norway, p o l a n d , s w e d e n , s l o v e n i a , luxembourg, u.K., Ireland, slovak, switzerland, Hungary, Italy 5.15-5.35 Ghz & 5.725-5.875 Ghz (channels 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165, 169) czech Republic R&TTE 1999/5/EC WLAN 2.4 – 2.4835 GHz IEEE 802.11 b/g/n spectrum

regulation MHz, europa (etsI) max. eIRp Innenbereich max. eIRp außenbereich

2.4GHz wireless frequency operation in EEC countries

Region Frequency band Max output power (eIRp) Metropolitan 2400-2454MHz 100mW

Guadeloupe, Martinique, st

pierre et Miquelon, Mayotte 2454-2483.5MHz 100mW indoor, 10mW outdoor Reunion et Guyane 2400-2483.5MHz 100mW Rest of eu community 2420-2483.5MHz 100mW

Referências

Documentos relacionados

6056 ADRIANI KAPPAUN INDEFERIDA - Não cumprimento do item 2, subitem 2.2, letra “e” do edital. INSTRUTOR

Júlia Melo Azevedo Cruz 1 Resumo: Este trabalho tem o objetivo de analisar as apropriações e releituras feitas pelo Exército Zapatista de Libertação Nacional (EZLN) –

Considerando os aspectos descritos acima, em relação as TIC e TA, este trabalho analisou, dentre os artigos publicados, aqueles que contemplavam as TIC (Tecnologias da

Os dados apontaram que a população de Bambuí tem bons conhecimentos gerais sobre os tria- tomíneos e a doença de Chagas em ambos os grupos (adultos e crianças), entretanto

A empresa convocará eleição para a CIPA com 60 (sessenta) dias de antecedência da sua realização, dando publicidade do ato, enviando cópia ao sindicato suscitante no

Distribuição segundo o score de agentes de limpeza cavitária sobre a microinfiltração marginal em restaurações adesivas da parede cervical em relação aos

7.4 As propostas inscritas que forem classificadas como não habilitados poderão ser retiradas no Protocolo da Coordenadoria do Sistema Municipal de Bibliotecas, à Rua

por objetivo caracterizar e comparar as características clínicas e demográficas dos pacientes portadores de câncer bucal e avaliar os aspectos microscópicos de cada