• Nenhum resultado encontrado

Mat. Res. vol.9 número1

N/A
N/A
Protected

Academic year: 2018

Share "Mat. Res. vol.9 número1"

Copied!
5
0
0

Texto

Imagem

Figure 1. Wooden cross-arm with standards holes and 2.4 meter long.
Table 2. Bending test results and simulations for Eucalyptus citriodora cross-arms.
Table 11. Electrical characteristics of wood coated with polyurethane resin.

Referências

Documentos relacionados

The mean values obtained in the three-point bending test for ultimate strength, elasticity modulus and fracture defl ection, as well as their respective dispersions for composite

Table 2 presents the average values of effective moisture U (%), and modulus of elasticity E (MPa), for the compression parallel to the grain tests according to the six wood

Through mechanical and physical tests the maximum tensile and lexural strength, modulus of elasticity, maximum deformation, composite density and water absorption index

The data for the water content, Poisson’s ratio, shear test, modulus of elasticity and compressive strength of the samples (test specimens) were submitted to analysis of

The higher basic and apparent density values were found in the Corymbia citriodora , followed by Eucalyptus tereticornis , and Eucalyptus grandis , however, in general, for

The treatment of the filaments with NaOH and maleic anhydride decreased average property values of impact strength, modulus of elasticity, bending strength and

The average values of the modulus of elasticity (MOE) and wood strength of clear wood samples (without knots) compared to wood samples with knots, within the different size

Paricá wood has average fiber width and intermediate lume diameter values when compared to Eucalyptus and Pinus wood planted in Brazil, and similar values to the species