Science Arts & Métiers (SAM)

The equilibrium phase diagram of zirconium-hydrogen Zr-H system is relatively complex, as the formation of different hydride phases is dependent on hydrogen concentration and cooling

Preliminary model families selection In this step, we are looking for predictive models which shall meet the following criteria: • The learning model must be able to classify a

In the present work, the mass gain kinetics increases with strain-hardening of tensile samples, which can be attributed to a faster precipitation of MoN and Mo2N nitrides at the

Laser surface melting of nickel-based alloy reduces nickel release in the primary cooling system of a nuclear power plant Wilfried Pacquentina,*, Lucille Goutona, Nad ` ege Caronb,

Correlation in rough surfaces generated by random deposition with germination length lG= 2 for different system sizes L averages are computed over k = 100 different configurations...

Since one problem of practical importance is to determine the extreme roughness amplitude that will be found in a large scale sam- ple by using a small evaluation length, the procedure

It can also be seen that the higher fatigue strength of the 45°-B1 batch compared to the 90° batch is not in agreement with the pore size distributions measured on polished samples of

Vertical versus orthogonal distance minimization The evaluation of the effect of fitting data based on vertical and orthogonal distance minimization is achieved here by using the