Science Arts & Métiers (SAM)

Table 2 In-plane and out-of-plane orientation of the localization band for two different loading modes Steel Single Phase Orientation θ1 θ2 Uniaxial Tension 50° 90° Loading mode

Laser Technol.82170–82 [23]Li Z, Jiang Y, Zhou R, Gao F, Shan Q and Tan J 2014 Thermal fatigue mechanism of WC particles reinforced steel substrate surface composite at different

The lack of moist air and the sharp strain gradient on the one hand, and the higher stress triaxiality around an internal pore, on the other hand, cer- tainly make fatigue crack

Introduction Nomenclature CF: Carbon Fibers CFRP: Carbon Fibers Reinforced Plastics EOL: End-of-Life ILSS: InterLaminar Shear Strength LCA: Life Cycle Analysis rCF: Recycled Carbon

The cold rolled CR and cold rolled aged CR/573K‐0.6ks/WQ and CR/573K‐7.2ks/WQ specimen revealing a strong hardening under tension have quite close fatigue life performances under 3%, 2%

Analysis of the length scale characterized by the yield stress fluids porosimetry method for consolidated media: comparison with pore network models and mercury intrusion porosimetry

16 Schematic of the designed extrusion device to printing continuous carbon fiber reinforced PLA [38] Table 4 Statistic results of tensile and flexure strength of three different

This provides a first explanation of the fatigue life reinforcement or the crack propagation resistance increase for non- relaxing conditions: by enabling strong secondary crack