Science Arts & Métiers (SAM)

CRITERE DE SECONDE VARIATION D’ENERGIE Nous avons montré que la stabilité de la réponse quasi- statique d’un solide dissipatif standard élasto-plastique ou visco-plastique est assurée

The main conclusions regarding experimental investigation are listed below: - The uncut chip thickness influences mainly burr height - A transition uncut chip thickness, htr, is

Laser Technol.82170–82 [23]Li Z, Jiang Y, Zhou R, Gao F, Shan Q and Tan J 2014 Thermal fatigue mechanism of WC particles reinforced steel substrate surface composite at different

In order to compare the rotor eddy current losses between different combinations, an indicator is developed using the equation 4 on an estimation of the losses induced by a magnetic

The robot and the suit don’t really have an identity, they are anonymous, everyone can play these characters." However, some participants formulated interesting remarks in favor of the

This is an author-deposited version published in: https://sam.ensam.eu Handle ID: .http://hdl.handle.net/10985/10019 To cite this version : Andrea CARPINTERI, Takamoto ITOH, Thierry

The different works dealing with the influence of aging on the ultimate properties which were achieved on rubber materials Ben Hassine et al., 2014; Colin et al., 2019; Nait Abdelaziz

Discussion 199 Chemical characterizations of a GO electrical steel after oxidizing and nitriding show that the kinetics 200 of nitrogen adsorption and diffusion highly depends on