Science Arts & Métiers (SAM)

CRITERE DE SECONDE VARIATION D’ENERGIE Nous avons montré que la stabilité de la réponse quasi- statique d’un solide dissipatif standard élasto-plastique ou visco-plastique est assurée

Iconography-based modeling approach Starting from the spatial referencing of a set of iconographic sources see Section 3.2 describing historic buildings, the spatio- temporal

To conclude, ATBC increases efficiently the elongation at break of PLA while maintaining the permeability coefficient of helium and keeping the barrier properties against oxygen and

For all of these reasons, a Q4P1 shape function based on global DIC approach has been chosen for the present study, concerning the displacement field measurement during orthogonal

Laser surface melting of nickel-based alloy reduces nickel release in the primary cooling system of a nuclear power plant Wilfried Pacquentina,*, Lucille Goutona, Nad ` ege Caronb,

This article proposes to go further in the optimization of the product, by simultaneously characterizing the design, in terms of reliability and maintainability, as well as the dynamic

Vertical versus orthogonal distance minimization The evaluation of the effect of fitting data based on vertical and orthogonal distance minimization is achieved here by using the

Effect of build orientation and post‑curing of methacrylate‐based photocurable resin fabricated by stereolithography on the mechanical behavior from quasi‑static to high strain rate